I’m Receiving Raw Materials Every Week — How Do I Create a Simple Quarantine → Inspect → Approve → Production Workflow for a Small Candle Business?
शेयर करना
Does every delivery need a candle test? No. Material from an already-approved lot that passes a visual check can be released the same day. Tests are for new lots or noticeable differences.
How long does goods-in take? For most weekly deliveries, 15–30 minutes of inspection plus a few minutes to decide. A new wax lot adds a test pour and the cure time before the burn.
What if I need the material before the test is read? That is a buffer-stock problem. Hold enough approved stock to cover the test period so production never pressures you into skipping it.
The whole workflow on one page
For a small candle business, the aim is not a laboratory. It is a routine simple enough that every delivery goes through the same four doors in the same order, whoever happens to open the box. Each door has one question, one person who answers it and one label that shows the answer.
Four steps, four tags, one card per delivery. Everything else on this page is about making those steps fit a real week.
Who does what when there are only one or two of you
Separation of duties sounds corporate, but its purpose is simple: the person who wants to use the material today should not be the only person who decides it is fine. In a two-person business, one person receives and inspects, the other signs the release. In a one-person business, you can still get most of the benefit by separating the decision in time: inspect on arrival, and sign the release the next morning with fresh eyes, reading the card rather than your memory.
| Stage | Tag colour and wording | Who | Typical time | Written output |
|---|---|---|---|---|
| Receive | Red: QUARANTINE, receipt code, date | Whoever opens the parcel | 5–10 min | Receipt code on each item; invoice filed |
| Inspect | Red tag stays on | Receiver | 15–30 min per delivery | Goods-in results on the receipt card |
| Hold for test | Yellow: ON TEST, test ID, read-by date | Receiver pours the test | Test pour 20–40 min, then cure | Test ID linked to the receipt code |
| Conditional release | Yellow: CONDITIONAL, condition written | Approver | 2 min | Condition and expiry date on the card |
| Approve | Green: APPROVED, date, initials | Approver (or you, next morning) | 2 min | Signature on the card; retain taken |
| Reject | Black: REJECTED, reason | Approver | 5 min | Photos and message to supplier |
Worked example: one week, one delivery
Suppose every Monday brings a delivery like this one: 10 kg of CSI 468 coconut soy at ₹6,370.00, 1 kg of Bergamot Amber at ₹5,437.00, 100 thin Eco wicks at ₹590.00 and a pack of ten 200 ml matte jars at ₹708.00. The total is ₹6,370.00 + ₹5,437.00 + ₹590.00 + ₹708.00 = ₹13,105.00 of material sitting on the quarantine shelf until someone clears it.
| When | Wax | Fragrance oil | Wicks | Jars |
|---|---|---|---|---|
| Monday, arrival | Receive, tag, quarantine | Receive, tag, quarantine | Receive, tag, quarantine | Receive, tag, quarantine |
| Monday, inspection | Colour and smell against retain; flakes dry and clean | Colour and blind smell strip against retain | Count, tabs centred, no frayed ends on a sample | Every jar checked for chips and cracks; a few measured |
| Monday, decision | New lot: pour two test candles | Same as last approved lot: approve | Approve if sample passes | Approve sound jars; reject chipped ones |
| Monday to Wednesday | Test candles cure; the page states 48–72 h for soy before burn testing | In production | In production | In production |
| Thursday | Burn test beside retained old lot; approve or hold | |||
| Thursday onwards | Released if the test passes |
Notice that only one material needed a candle test this week. Oil from the same lot you already approved, wicks that pass a visual sample and jars that pass a defect sort can be released on the same day. The workflow slows down only where there is a genuine unknown.
Buffer stock is what makes quarantine possible
The Thursday release only works if you are not waiting for that wax on Tuesday. If you produce 30 candles of 200 g a day at 8%, three days of test time consumes 3 × 30 × 184 g = 16.56 kg of approved wax and 3 × 30 × 16 g = 1.44 kg of approved oil. That is the minimum approved stock to have on the green shelf when a new wax lot arrives, or production will pressure you into skipping the test. Order so that deliveries arrive while you still hold at least that much, and for larger quantities than the listed packs, ask on WhatsApp early rather than late.
Decision rules you can apply in two minutes
The approver's job is easier when the rules are written before the delivery arrives. These are suggested starting points to validate against your own history.
| Situation | Decision | Condition or next step |
|---|---|---|
| Same lot as an already-approved delivery, passes visual check | Approve | None |
| New lot, visual and smell match the retain | Approve for production; pour a confirmation candle for your core product | Read the confirmation burn before the next reorder |
| New lot, noticeable colour or smell difference | Hold for test | Side-by-side candle with retained old lot |
| Cosmetic difference that only matters in white or clear candles | Conditional release | Coloured or darker products only until tested |
| Chipped, cracked or broken glass | Reject those pieces | Photograph; remove from production; message supplier |
| Leak, contamination or missing labels on oil | Quarantine whole item | Ask supplier before any use |
Keep the rules honest. A new lot that fails your side-by-side comparison goes back to quarantine and the supplier hears about it, whoever supplied it, including us. And a rule that says "hold for test" should not be overridden because the test is inconvenient; if you keep overriding a rule, rewrite the rule rather than ignoring it.
Keeping the routine alive after week six
Workflows usually die of friction, not disagreement. Put the receipt cards on a clipboard next to the quarantine shelf. Pre-print the tags. Keep a vernier caliper, a pen thermometer, your scale, smell strips and the retain box within reach of the receiving table so that inspection does not start with a search.
The receipt card itself can be a half-page template. Across the top: receipt code, supplier, product, pack size, invoice number and date received. In the middle: the goods-in checks for that material, each with a tick box and a space for what you actually saw, not just pass or fail. At the bottom: the decision, any condition and its expiry date, the approver's initials, and the batch code of the first production run that used it. Filed in date order, those cards become your supplier history without any extra effort.
Once a month, spend ten minutes reading the cards. Which materials were held for testing, and how often did the test change the decision? If wicks from the same packet have passed every week for months, you might reduce their sample. If new wax lots regularly need a different pour temperature, that deserves a conversation with the supplier and a note in your specification. The workflow is doing its job when those patterns become visible.
Where this page fits
CSI already has guides that cover parts of this question. This page covers the goods-in check for the question above; these go deeper on the rest:
Three things to buy for this job
| Option | Price | Status on the September 2026 pull |
|---|---|---|
| 500 g | ₹325.00 | In stock |
| 1 kg | ₹650.00 | In stock |
| 5 kg | ₹3,185.00 | In stock |
| 10 kg | ₹6,370.00 | In stock |
| Option | Price | Status on the September 2026 pull |
|---|---|---|
| Pen thermometer | ₹354.00 | In stock |
| Option | Price | Status on the September 2026 pull |
|---|---|---|
| Digital scale | ₹354.00 | In stock |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials and production equipment, not finished candles. This guide separates general quality-control practice from what CSI's own product pages state, says plainly what CSI does not publish (lot numbers, certificates of analysis, tolerances), and labels every sample size, tolerance or retained quantity as a starting point for your own validation.
Prices are live CSI prices from September 2026; product pages are authoritative. Where a spec is not published — such as a lot number, a jar's internal diameter or a wick's burn rate — this guide says so rather than filling the gap.
For bulk quotes, questions about a specific delivery, GST invoicing, IFRA and MSDS documents, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- My Team Accidentally Mixed Raw Materials From Two Suppliers — How Can Better Storage Labels and Lot Tracking Prevent This at Larger Production Volumes?
- Should New Raw-Material Deliveries Be Kept Separate From Existing Approved Inventory Until Basic QC Is Completed?
- I Have Multiple Wax and Fragrance Batch Numbers in One Production Month — How Should My Batch Records Connect Finished Candles Back to the Exact Raw Materials Used?
- My Candle Business Is Growing From 500 to 5,000 Units a Month — At What Point Should Supplier Qualification and Incoming Raw-Material QC Become Formal Processes?
- I Want to Reduce Candle Batch Failures Before Production Starts — Which Incoming Checks on Wax, Fragrance, Wicks, Jars and Dyes Give the Highest Practical Value?
- I’m Choosing a Long-Term Candle Raw-Material Supplier — What Should I Compare Beyond Price: Consistency, Documentation, Batch Traceability, Availability, Packaging, MOQ and Technical Support?
- I Want to Build a Professional Incoming Raw-Material QC System for My Candle Business — How Should I Qualify Wax, Fragrance Oils, Wicks, Jars, Dyes and Moulds Before Releasing Each Shipment Into Commercial Production?
- I’m Moving From Buying 5 Kg to 100 Kg of Candle Wax — What Additional Supplier and Quality Checks Should I Introduce Before Scaling Purchases?
- I’m Moving From 100 g Fragrance Samples to 5 Kg Commercial Orders — What Should Change in My Raw-Material Approval Process?
- How to Maintain Consistency Between Large Soy Wax Candle Batches
- How to Tell If Soy Wax Is Good Quality
Customer reviews: The reviews at the top are genuine, published Judge.me reviews — Delcy Fernandes (5★, verified); Arminder Kaur (4★, verified); Monika Deep (4★, verified); Shanu Shah (5★, verified); Renam Dhoundiyal (4★, verified); Shivalik Manak (5★, verified). Names, ratings, dates and products as recorded by Judge.me.
Product facts (September 2026, CSI live store): Premium Coconut Soy Wax CSI 468 (flakes): 500 g ₹325.00, 1 kg ₹650.00, 5 kg ₹3,185.00, 10 kg ₹6,370.00 — coconut-soy blend · stated melt point 50–53°C, pour 58–60°C · stated fragrance load up to 13% · stated shelf life 60 months. Pen Thermometer: Pen thermometer ₹354.00 — range and accuracy not published. Candle Making Weighing Scale: Digital scale ₹354.00 — digital, grams or ounces · capacity and resolution not published.
Assumptions: Fragrance load is a percentage of total candle weight (200 g = 184 g wax + 16 g oil at 8%). CSI product pages do not publish lot numbers, certificates of analysis, tolerances, jar internal diameters, wick dimensions or mould hardness; where this guide needs them, it tells you to measure or ask. Sample sizes, tolerances, retained quantities, test lengths and acceptance rules are suggested starting points to validate, not standards or CSI policy. Hypothetical supplier prices are CSI prices adjusted by the stated percentage and labelled as such. Worked examples are illustrations. Prices and availability change — product pages are authoritative.