My Fragrance Oil Works in Room Spray but Performs Badly in Candles — Does Every Fragrance Oil Need to be Specifically Tested in Wax?

My Fragrance Oil Works in Room Spray but Performs Badly in Candles — Does Every Fragrance Oil Need to be Specifically Tested in Wax?

 

15 g testers from ₹68.44 Luxury Soy Wax CSI 464 500 g ₹260.00 Votive jars 10 for ₹318.60
CSI fragrance formulation guides · Bottle vs wax, part 2
Why a spray-proven scent still has to be tested in wax, and a three-oil screen that does it for under ₹1,000.
★★★★☆
"Quality of the wick is good for jar candles, team can work on the pricing and delivery timelines."
Monika DeepVerified buyer · Oct 2025
Eco Candle Wicks
★★★★★
"Quality wick, works very well"
AshwiniSep 2025
Eco Candle Wicks
★★★★☆
"Good quality .... if possible delivery date would be try little bit quick please"
Subhankar RoyVerified buyer · Sep 2024
Eco Candle Wicks
★★★★★
"This needle is very helpful as it doesn't damage the mould and there is no leakage of wax while pouring.. I would definitely recommend this .."
LJAug 2024
Premium Candle Wicking Needle
★★★★★
"Good one"
Sneha TamangVerified buyer · Apr 2025
Premium Candle Wicking Needle
★★★★★
"This bamboo wick holder doesn't exert any pressure on the wicks… and it is a very useful product 👌🏻👌🏻.."
Lalitha JaganAug 2024
Bamboo Wick Holder
★★★★☆
"Quality of the wick is good for jar candles, team can work on the pricing and delivery timelines."
Monika DeepVerified buyer · Oct 2025
Eco Candle Wicks
★★★★★
"Quality wick, works very well"
AshwiniSep 2025
Eco Candle Wicks
★★★★☆
"Good quality .... if possible delivery date would be try little bit quick please"
Subhankar RoyVerified buyer · Sep 2024
Eco Candle Wicks
★★★★★
"This needle is very helpful as it doesn't damage the mould and there is no leakage of wax while pouring.. I would definitely recommend this .."
LJAug 2024
Premium Candle Wicking Needle
★★★★★
"Good one"
Sneha TamangVerified buyer · Apr 2025
Premium Candle Wicking Needle
★★★★★
"This bamboo wick holder doesn't exert any pressure on the wicks… and it is a very useful product 👌🏻👌🏻.."
Lalitha JaganAug 2024
Bamboo Wick Holder
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. They are general reviews of the wicks and wick tools named on each card, not assessments of the wax-screening method set out below. Wording is unedited.
✓ Candle fragrance oils, sold by weight from 15 g ✓ MSDS & IFRA documentation on request ✓ GST invoicing on every order
Formulation · Spray vs Wax
A room spray scatters fragrance into the air in an instant, cold, with no wax in the way. A candle asks the same oil to dissolve in wax, stay put for weeks, then leave a heated pool beside a flame. Those are three jobs a spray never tests. So yes: every oil needs its own test in your wax, including ours.
₹940.56
for a three-oil wax screen: three 15 g testers, 500 g CSI 464, wicks and ten votive jars · CSI live pricing, September 2026
Quick answers — read this first
Why does my oil work in a spray but not in a candle? A spray delivers fragrance cold, as droplets, in a second. A candle needs the oil to dissolve in wax, hold through cure and release from a hot pool. An oil can pass the first and fail any of the other three.

Does every fragrance oil need testing in wax? Yes. Every oil, in every wax you use, with your wick and jar. CSI publishes no hot-throw or wax-compatibility data for any oil, so our oils need that test too.

Are spray or diffuser oils safe in candles? Do not assume so. Ask the supplier whether the oil is intended for candles and request its MSDS and IFRA certificate for the candle category. For CSI oils, ask on WhatsApp.

What is the cheapest proper test? Three 15 g testers poured as three 50 g votives each at 8% (4 g oil per votive). With CSI 464, wicks and votive jars the screen costs ₹940.56. See the screen.
The short answer
Short answer: Spray performance tells you the scent is pleasant and diffuses cold. It says nothing about solubility in wax, stability during cure, or behaviour at a flame. Test every oil in wax.
Three checkpoints: Dissolve (no sweating or separation) · Hold (no mottling or colour change through cure) · Burn (no flare or soot, fair hot throw). A spray meets none of them.
Maths: 50 g votive at 8% = 4 g oil + 46 g wax. A 15 g tester pours three votives (12 g) with 3 g spare. Nine votives need 414 g of wax.
Where the oil has to survive — spray path vs candle path SPRAY fragrance oil solvent / water base atomised droplets air, instantly No heat. No wax. Strength is judged the second it is sprayed. CANDLE fragrance oil dissolve in wax hold through cure melt by a flame air, slowly sweat · separate if it will not dissolve mottle · discolour during storage flare · soot at the flame Three extra checkpoints a spray never meets. Each one needs a test in your own wax.
A spray carries fragrance through a solvent or water base and an atomiser straight into the air. A candle adds three stages: the oil must dissolve in wax, hold there through cure and storage, and then evaporate from a pool heated by a flame. The failure notes under each stage are the visible signs makers commonly look for. They are general candle-making practice, not measurements of any particular oil.
Straight answer
My fragrance oil works in room spray but performs badly in candles — does every fragrance oil need to be specifically tested in wax?
Yes. A room spray and a candle ask completely different things of an oil. In a spray, the oil is carried in a solvent or water base and atomised straight into the air, cold. You judge it the moment it leaves the nozzle. In a candle the same oil must pass three tests a spray never sets: it has to dissolve evenly in wax without sweating or separating, hold there through cure without mottling or colour change, and then release from a pool heated by a flame without flaring or sooting. An oil can be excellent at the first job and poor at any of the other three. So every oil needs its own test in every wax you use, with your wick and jar. That includes CSI's oils: we publish no hot-throw or wax-compatibility data for any oil. Before you pour, ask any supplier whether the oil is intended for candles and request its MSDS and IFRA certificate for the candle category. Then screen it cheaply: a 15 g tester pours three 50 g votives at 8%, which is enough to see how the oil dissolves, cures and burns.
One line: a spray proves the scent. Only wax proves the candle.
If your spray range is built on fresh scents, start the wax screen with three fresh profiles. Blue Ocean and Cucumber Green Tea at ₹93.22 each and Lemongrass and Lime at ₹116.52 for 15 g, ₹302.96 for all three. Each tester pours three 50 g votives at 8% with 3 g to spare.
Shop 15 g testers

Two different jobs

A spray is judged in the first second. A candle is judged after weeks in a jar and an hour beside a flame.

Makers who build a scent range on room sprays often reach candles with a reasonable assumption: the scent already sells, so it should work in wax. The assumption skips the fact that the oil is doing a different job. In a spray the fragrance is dispersed in a liquid base and forced out as fine droplets. There is no heat, no wax to dissolve into, no weeks of storage in a solid, and no flame. The nose meets the fragrance almost immediately, at close range and at full strength. A candle removes every one of those advantages and adds three stages where things can go wrong.

General formulation practice · mechanisms commonly described, not CSI measurements
What a spray asks of an oil, and what a candle asks
Question Room spray Candle Why spray success does not transfer
What carries the oil? A solvent or water base, often with a solubiliser Wax, which must dissolve the oil itself An oil that disperses in a spray base may not dissolve evenly in wax
How does scent reach the air? Atomised droplets, instantly Evaporation from a heated pool, slowly Spray strength is burst strength; candle strength is sustained release
Is there heat? No Yes, a flame at the centre of the pool Heat changes which parts of the scent come forward, and some vapour burns
How long does it sit before use? Liquid in a bottle Solid wax through cure and shelf life Instability shows up only in wax: sweating, mottling, colour change
What else is affected? Nothing but the air The flame, the wick and the jar surface Some oils change how a wick behaves at the same load
Where is it judged? Close range, the moment of spraying Across a room, after the pool has formed The judging conditions are not comparable

Read the last column and the answer to the title question is plain. A spray tests whether the scent is pleasant and whether it disperses when forced into the air. It does not test solubility in wax, stability over weeks, flame behaviour or slow release from a pool. Those four are what decide whether a candle is good. That is why the same scent can be a best-seller as a spray and a disappointment as a candle, without anything being wrong with the scent.

There is also the question of what the oil is made for. Oils sold for sprays, diffusers or as multipurpose aroma oils may be supplied in a carrier or with components chosen for that use, and an oil intended for candles is chosen with wax and flame in mind. Composition is not something you can see from a label, and CSI's data does not list composition for any oil, including our own. So ask the supplier directly what the oil is intended for, and treat "works in everything" as a claim to test, not a specification.

The expensive shortcut. Pouring a full batch of candles from a spray oil because the spray sells. If the oil sweats out of the wax or sits unevenly, you will find out after the batch has cured, when every candle has the same fault. A three-votive screen costs a fraction of one batch, and it tells you in days whether the oil belongs in wax at all.

The three wax checkpoints

Dissolve. Hold. Burn. A spray is tested on none of them, and a candle can fail on any of them.

Every oil you move into wax should pass three checkpoints, in order. The signs below are what candle makers commonly look for. None of them is a CSI measurement. They are observations you make on your own test pours, and they only mean something when you compare them against a control candle poured the same way.

What to look for · record each observation with the date and cure age
Dissolve, hold, burn — signs and what they suggest
Checkpoint When to look Signs of trouble What it commonly suggests Next step
Dissolve At pour, and after the wax has set Oily film on the surface, droplets at the glass, a layer at the base Oil not fully dissolved or load too high for this oil in this wax Re-pour with thorough stirring; then one load step down
Hold At 48 hours, 7 days and 14 days (working checkpoints) Beads of oil on top, wet spots, mottling, colour shift Oil working its way out of the wax, or a component reacting over time Compare against an unscented control from the same wax
Burn: flame First hour of the first full burn Tall or flickering flame, soot, a pool that runs hot Oil changing how the wick behaves at this load Same oil, same load, one wick step down
Burn: throw Once the pool reaches the glass Pleasant close by, little across the room Release or diffusion, not necessarily the oil See concentration vs diffusion

The dissolve checkpoint is where spray oils most often surprise makers. If you see an oily film after the wax sets, re-melt a sample, stir it properly and pour again before concluding anything. Poor stirring produces the same signs as poor compatibility. Why 20 seconds of stirring is not enough explains the mixing side. If the film returns after thorough mixing, drop one load step and repeat.

The hold checkpoint needs patience. Sweating and colour change can take days to show, which is why a screen should include at least one votive that is simply left alone and inspected at each checkpoint. If you see a colour change, do not assume which component caused it. A single-oil test against an unscented control is the only way to know. Why a blend sweats when its parts do not covers the blended case.

The burn checkpoint has two halves. First the flame: some oils change how a wick behaves, so watch the first full burn closely. Then the throw, judged once the pool reaches the glass and in a room of fair size. A weak result here is not always the oil. The melt-versus-candle split test and the variable checklist help you separate oil problems from wick, cure and room problems.

Pour one unscented control
Pour one votive of plain wax alongside the scented ones. It costs a few rupees and gives every observation something to be compared against. Frosting, surface texture and slight colour are properties of the wax. Anything the scented votives show that the control does not is down to the oil or the load.
The CSI principle
Every oil, in every wax, with your wick.
An oil proven in a spray, in another maker's candle or in a different wax has been proven somewhere else. The only test that counts for your candle is the one poured in your wax, at your load, with your wick and jar, cured and burned the way your customer will.

The votive screen

The screen below uses 50 g votives because a 15 g tester divides cleanly into three of them at 8%: 4 g of oil and 46 g of wax each, 12 g in total, 3 g spare. The votive size is illustrative. CSI's Votive Glass Jars are listed without a published fill weight, so weigh one filled with water and scale the numbers to your jar. We use Luxury Soy Wax CSI 464 for the screen, rated up to 10% by its maker. That keeps an 8% test well inside the ceiling and leaves room for one step up if needed. CSI's guidance for CSI 464 is an 80–90°C melt and pour. Confirm it on the product page and follow the maker's instructions for when to add fragrance.

Load on finished weight · 50 g votive · CSI 464 (up to 10%)
Votive pour sheet
Load Oil per votive Wax per votive Votives from one 15 g tester Note
8% 4 g 46 g 3 (+3 g spare) Screen load
10% 5 g 45 g 3 CSI 464's stated maximum; use only as a second step
Unscented control 0 g 50 g — One per screen
1
Ask for the documents firstBefore you pour, request the MSDS and the IFRA certificate for the candle category for each oil. If a supplier cannot say whether an oil is intended for candles, treat that as a warning. For CSI oils, ask on WhatsApp.
2
Pour three votives per oil and one controlMelt 464 g of CSI 464 in total. For each oil, weigh 138 g of wax, add 12 g of oil at the addition temperature the wax maker gives, stir thoroughly and pour three votives. Pour one unscented votive last.
3
Label for the three checkpointsMark votive 1 of each oil observe (never burned), votive 2 early burn and votive 3 cured burn. Note the date, load and wick on each.
4
Inspect at the working checkpointsAt 48 hours, 7 days and 14 days, look at every observe votive against the control. Record film, droplets, mottling and colour. These checkpoints are working practice, not specs.
5
Burn once early, once curedBurn the early votive at 48 hours and the cured votive at 7 or 14 days, in the same room, for the same time. Watch the flame first, then score throw once the pool has reached the glass.
6
Decide per oilPass all three checkpoints: move to a full-size candle test. Fail dissolve after a proper re-pour: drop the oil for candles, or ask the supplier about it. Pass dissolve and hold but throw weakly: that is a candle-system question, and Before I Reject a Fragrance Oil for Weak Hot Throw, What Variables Should I Test in Wax, Wick, Dosage, Cure and Room Conditions? is the next read.

The screen answers the title question for your own scents. If the spray oil you use is not one you can buy in a candle grade, the screen also works as a way to choose a replacement: pour two or three candle oils in the same family, run the same checkpoints and compare. The cost of the screen is small against what it protects. Buying 100 g of each of the three fresh oils blind would cost ₹1,437.82, which is ₹1,134.86 more than the three testers, before any candle has been poured.

Argued against our own interest, plainly. We sell candle fragrance oils, and it would be easy to tell you ours need no testing. We cannot say that honestly. CSI does not publish hot-throw, cure or wax-compatibility data for any oil, so the test is yours to run with our oils too. Buy the 15 g, not the 100 g, until an oil has passed all three checkpoints in your wax.

Documents before wax

The paperwork does not tell you how an oil will throw, but it does tell you what the oil is and what it is cleared for. For a maker moving from sprays to candles, three documents are worth asking for before the first pour. The MSDS (material safety data sheet) covers handling, storage and transport properties, including flash point. Flash point is a safety and transport figure, not the temperature at which to add the oil to wax. Flash point versus addition temperature explains the difference. The IFRA certificate states the maximum use level for each product category, and candles are a category of their own, distinct from sprays. Ask for the certificate covering candles specifically. And a plain written statement of what the oil is intended for.

CSI does not list IFRA percentages or flash points on this page because they are not in our published data for any individual oil. We provide MSDS and IFRA documentation on request, so ask on WhatsApp with the oil names and we will send what applies. If you are comparing us with another supplier, ask them the same questions. How to judge an oil listed online lists the rest of the evidence worth requesting, and switching suppliers covers what to retest when you change source.

A spray sells the scent. A candle has to carry it through wax, time and fire.
— CandleMakingSuppliesIndia

What to buy

The three picks are fresh, clean profiles of the kind that often start life in a spray range. All three have an in-stock 15 g tester, and all are in the lower price bands of the catalogue. Prices are CSI live pricing, pulled 24 September 2026. We make no claim about how any of them throws. That is what the screen is for.

1
Aquatic fresh · 15 g tester in stock
Blue Ocean Fragrance Oil
A clean aquatic profile of the sort often used in room sprays. The 15 g at ₹93.22 is the screen size. From 50 g upward it is priced almost flat, at about ₹4.95 a gram.
Pack Price Per gram 50 g votives at 8%
15 g ₹93.22 ₹6.21 3.75
50 g ₹247.00 ₹4.94 12.50
100 g ₹495.00 ₹4.95 25.00
500 g ₹2,478.00 ₹4.96 125.00
1 kg ₹4,956.00 ₹4.96 250.00
₹24.86 of oil per screen votive Buy Blue Ocean
2
Green fresh · low per-gram price
Cucumber Green Tea Fragrance Oil
A green, watery profile with one of the lower per-gram prices in the catalogue at 50 g and 100 g (₹3.53). The 15 g at ₹93.22 costs the same as Blue Ocean, which makes the two a fair pair to screen together.
Pack Price Per gram 50 g votives at 8%
15 g ₹93.22 ₹6.21 3.75
50 g ₹176.41 ₹3.53 12.50
100 g ₹352.82 ₹3.53 25.00
500 g ₹1,663.80 ₹3.33 125.00
1 kg ₹3,327.60 ₹3.33 250.00
₹56.45 of oil per 200 g candle at the 100 g rate, if it passes Buy Cucumber Green Tea
3
Citrus-herbal · real 1 kg break
Lemongrass and Lime Fragrance Oil
A sharp citrus-herbal profile. Citrus top notes are the kind often described as fading faster in a burning candle, so it is a useful stress test for the burn checkpoint. The 1 kg is 11.9% cheaper per gram than the 100 g if it earns a production slot.
Pack Price Per gram 50 g votives at 8%
15 g ₹116.52 ₹7.77 3.75
50 g ₹330.00 ₹6.60 12.50
100 g ₹590.00 ₹5.90 25.00
500 g ₹2,600.00 ₹5.20 125.00
1 kg ₹5,200.00 ₹5.20 250.00
₹31.07 of oil per screen votive Buy Lemongrass and Lime
CSI live pricing, pulled 24 September 2026 (oils, wax, votives) · wicks verified 10 September 2026
Shopping list for the three-oil screen
Item Price Used for
Blue Ocean Fragrance Oil 15 g ₹93.22 3 votives (12 g)
Cucumber Green Tea Fragrance Oil 15 g ₹93.22 3 votives (12 g)
Lemongrass and Lime Fragrance Oil 15 g ₹116.52 3 votives (12 g)
Luxury Soy Wax CSI 464, 500 g ₹260.00 414 g + 50 g control
Eco Candle Wicks Thin C1, pack of 10 ₹59.00 9 scented votives + control
Votive Glass Jars – Black, pack of 10 ₹318.60 9 scented votives + control
Total ₹940.56 Ten votives, three checkpoints
If an oil passes · 200 g candle at 8% in CSI 464 · oil at the 100 g rate · wick ₹5.90 · jar ₹70.80
What each oil costs per screen votive and per production candle
Oil ₹/g at 15 g Oil per votive ₹/g at 100 g Oil per 200 g candle Material cost per candle
Blue Ocean ₹6.21 ₹24.86 ₹4.95 ₹79.20 ₹249.26
Cucumber Green Tea ₹6.21 ₹24.86 ₹3.53 ₹56.45 ₹226.51
Lemongrass and Lime ₹7.77 ₹31.07 ₹5.90 ₹94.40 ₹264.46

Material cost covers oil, wax (₹93.36 of CSI 464 for 184 g), one Eco Thin C1 wick and one White Matte Glass Jar. It excludes labour, packaging, freight and GST. The point of the second table is sequencing: ₹24.86 of oil answers whether Blue Ocean belongs in wax at all, before ₹79.20 goes into each production candle.

Moving a spray range into candles for Diwali (8 November 2026)? Run the screen this week and you will have cured results by mid-October. For production quantities of the oils that pass, GST invoicing and IFRA documentation, message us on WhatsApp.
Plan the move to candles on WhatsApp

Once an oil passes the screen, the questions become the ones every candle maker faces: the lowest load that still throws, how room size affects the verdict and why two equally strong oils can fill a room differently.

Why trust this guide

CANDLEMAKINGSUPPLIESINDIA supplies raw materials, not finished candles. We sell candle fragrance oils, and the convenient line would be that ours need no testing. This page says the opposite, because CSI publishes no throw, cure or compatibility data for any oil and your wax, wick and jar are not ours.

Oil, wax and votive-jar prices are CSI live pricing, pulled 24 September 2026. Wick and jar prices are Blog 760's, verified 10 September 2026. Pour sheets, per-votive and per-candle costs and the shopping-list total are arithmetic on those prices. The 50 g votive is an illustrative fill; the votive jar's fill weight is not published.

Descriptions of how sprays and candles deliver fragrance, and the signs listed at each checkpoint, are general formulation and candle-making knowledge, not CSI test results. Cure checkpoints are working practice. For MSDS, IFRA certificates for the candle category, or help choosing oils to screen, message us on WhatsApp at +91 7397976926.

Frequently asked questions

can I use room spray fragrance oil in candles
Only after testing, and only if the supplier confirms the oil is intended for candles. Ask for the MSDS and the IFRA certificate for the candle category, then pour a small screen in your wax: dissolve, hold through cure, and burn. Spray performance does not predict any of those.
why does my fragrance oil sweat out of the candle
Commonly because the oil has not fully dissolved, the stirring was too short, or the load is high for that oil in that wax. Re-pour with thorough mixing first. If it still sweats, drop one load step. My Candle Sweats Oil at 12% Fragrance Load but Not at 8% — Does That Mean I Have Exceeded the Practical Fragrance Capacity of My Wax? covers sweating at high loads in detail.
do I need to test every fragrance oil in candles
Yes, every oil in every wax you use, with your wick and jar. CSI publishes no hot-throw or compatibility data for any oil, so this applies to our oils too. A 15 g tester poured as three 50 g votives at 8% is a cheap way to do it.
difference between candle fragrance oil and diffuser oil
They are intended for different delivery systems. A candle oil has to dissolve in wax, stay stable through cure and burn cleanly at a flame. A spray or diffuser oil is chosen to disperse in a liquid base. Composition is not visible on a label, so ask the supplier what each oil is intended for.
how to test fragrance oil compatibility with soy wax
Pour at a set load with thorough stirring, alongside an unscented control. Inspect for film, droplets, mottling and colour at working checkpoints such as 48 hours, 7 days and 14 days. Then burn one early and one cured sample. The table in the three wax checkpoints lists what each sign suggests.
is a strong smelling room spray oil good for candles
Not necessarily. Spray strength is burst strength judged at close range. Candle throw is slow release from a heated pool across a room. Two Fragrance Oils Smell Equally Strong When Neat but One Fills the Room When Burned and the Other Doesn't — What Causes the Difference? explains why two oils that smell equally strong can perform very differently once burned.
Dissolve, hold, burn
Screen every oil in your wax before a spray-proven scent becomes a candle batch.
Fragrance oils from ₹68.44 for 15 g, CSI 464 from ₹260.00, votive jars at ₹318.60 for 10 and Eco wicks from ₹59.00. MSDS and IFRA documentation on request.
Shop fragrance oils Request MSDS and IFRA on WhatsApp
Editorial standards & sources
About this guide: Written by the CANDLEMAKINGSUPPLIESINDIA team. Product recommendations reflect the CSI range. The dissolve-hold-burn screen applies to any oil from any supplier.

Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Eco Candle Wicks, Premium Candle Wicking Needle and Bamboo Wick Holder. They are general product reviews, not assessments of the guidance set out here. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on the three reviews Judge.me recorded as verified — Monika Deep, Subhankar Roy and Sneha Tamang; the reviews from Ashwini, LJ and Lalitha Jagan are published but not recorded as verified, and carry no badge.

Figures pulled 24 September 2026, CSI live pricing: Blue Ocean Fragrance Oil ₹93.22 / 15 g, ₹247.00 / 50 g, ₹495.00 / 100 g, ₹2,478.00 / 500 g, ₹4,956.00 / 1 kg. Cucumber Green Tea Fragrance Oil ₹93.22 / 15 g, ₹176.41 / 50 g, ₹352.82 / 100 g, ₹1,663.80 / 500 g, ₹3,327.60 / 1 kg. Lemongrass and Lime Fragrance Oil ₹116.52 / 15 g, ₹330.00 / 50 g, ₹590.00 / 100 g, ₹2,600.00 / 500 g, ₹5,200.00 / 1 kg. Luxury Soy Wax CSI 464 ₹260.00 / 500 g, ₹507.40 / 1 kg. Votive Glass Jars – Black ₹35.40 / 1, ₹159.30 / 5, ₹318.60 / 10. Cheapest 15 g in the collection ₹68.44 (Eucalyptus Spearmint). Figures verified 10 September 2026 (Blog 760): Eco Candle Wicks Thin C1 ₹59.00 / 10 (₹5.90 each); White Matte Glass Jar ₹354.00 / 5 (₹70.80 each). Shopping-list total ₹940.56; blind 100 g purchase of the three oils ₹1,437.82.

Non-price figures and assumptions: Load is the share of finished weight (oil = weight × load). The 50 g votive fill is illustrative; the votive jar's fill weight is not published. Cure checkpoints of 48 hours, 7 days and 14 days are working checkpoints, not specs. CSI 464 is rated up to 10% fragrance load by its maker, a formulation maximum, not a regulatory limit. CSI's CSI 464 guidance is 80–90°C melt and pour; confirm on the product page. No per-oil flash point, IFRA percentage or composition is stated here; MSDS and IFRA documents are available on request. CSI publishes no hot-throw, cold-throw or compatibility data for any oil. Diwali 2026 falls on 8 November. Prices and availability change — the linked product pages are always authoritative.
ब्लॉग पर वापस जाएं