Should I Compare Candle Waxes Using Stable Fragrance Load, Hot Throw, Burn Behaviour and Indian Heat Resistance Rather Than Maximum Load Alone?
शेयर करना
How do I compare stated loads fairly? Convert each to total-candle basis: up to 10% of wax is 9.09% of total; 13% of wax is 11.50% of total.
How do I test Indian heat resistance? Your own supervised warm-room or cabinet hold and warm–cool cycles at conditions you choose. CSI publishes no wax heat rating. Never use a kitchen oven.
What weights should I use? A suggested ecommerce start: throw 25, heat 25, stable load 20, burn 20, cost 10. Fix them before testing.
Yes, and maximum load should carry the least weight
A stated maximum load tells you how much oil the wax maker expects the wax to hold with typical oils. It says nothing about how that wax throws scent, how it burns in your jar, or what it does in a parcel sitting in a warm vehicle. If you choose a wax on maximum load alone, you are choosing on the one property that is easiest to print and least connected to whether the candle succeeds.
A commercial candle in India has to do four things: hold its oil at your working load, throw that oil when lit, burn cleanly to a full pool, and stay dry through storage and transit heat. A fifth consideration, cost per finished candle, decides between waxes that pass the first four. That is the comparison worth building.
Where the printed numbers start you
Begin by putting each wax's stated figure on the same basis as your recipe. CSI wax pages state load as a percentage of wax weight; convert to total candle weight with W ÷ (100 + W) × 100.
| Wax | Stated load on page | As % of total candle | Wax cost in a 200 g candle at 8% (184 g) |
|---|---|---|---|
| Luxury Soy Wax CSI 464 | Up to 10% | 9.09% | 184 × ₹0.5074 = ₹93.36 |
| Luxury Soy Wax Chunks | Maximum 13% of wax weight | 11.50% | 184 × ₹0.5999 = ₹110.38 |
| Premium Coconut Soy CSI 468 | Up to 13% | 11.50% | 184 × ₹0.637 = ₹117.21 |
The per-gram rates are from the 10 kg packs: ₹5,074.00, ₹5,999.00 and ₹6,370.00 each divided by 10,000. CSI 468 also states a melt point of 50–53°C and a pour of 58–60°C; the other two pages publish no melt point, so you cannot compare melt points across all three from the pages and should not try.
That table is where most comparisons stop. It is where yours should begin. Two of these waxes state the same ceiling; only testing tells you whether either reaches it with your oil, and whether either throws, burns or holds up in heat better than the cheaper option at a lower working load.
The five criteria and how to measure each
| Criterion | Suggested weight | What you measure | How to score 1–5 |
|---|---|---|---|
| Stable load | 20 | Highest total-basis load staying dry through your observation schedule, three candles per step | Higher clean load with margin scores higher |
| Hot throw | 25 | Blind ranking at your intended working load, two or more people, two days | Consistently ranked stronger scores higher |
| Burn behaviour | 20 | Full melt pool, no tunnelling, flame steady, little soot or mushrooming with the approved wick | Fewer faults across the test burns scores higher |
| Heat stability | 25 | Surface after a supervised warm hold and a few warm–cool cycles at conditions you choose | Dry and unchanged scores higher |
| Cost per candle | 10 | Wax plus oil plus jar plus wick at the working load | Lower cost scores higher |
The weights are a suggested starting point for an ecommerce brand shipping across India, where hot throw and heat stability carry most of the commercial risk. A maker selling only in air-conditioned retail might weight heat stability lower and appearance higher. Choose your weights before you test, so the results cannot tempt you into reweighting.
Why heat gets so much weight
CSI publishes no heat-resistance or survival temperature for any of its waxes. The only way to know how a wax behaves in a warm parcel is your own controlled test: a warm room or cabinet at a condition you pick, such as 35°C or 40°C, supervised, never a kitchen oven and never near a flame. Because nobody else can give you this number, it deserves a large share of the decision.
A worked example: when the higher-capacity wax loses
Imagine two waxes, labelled A and B, scored by a maker on the template above. These scores are illustrative only and are not results for any CSI wax.
Wax A has the higher stated maximum and scores 5 for stable load, but 2 for throw, 3 for burn, 2 for heat stability and 3 for cost. Weighted, that is 5 × 20 + 2 × 25 + 3 × 20 + 2 × 25 + 3 × 10 = 290 out of 500.
Wax B holds less, scoring 3 for stable load, but 4 for throw, 4 for burn, 4 for heat stability and 4 for cost. Weighted, that is 3 × 20 + 4 × 25 + 4 × 20 + 4 × 25 + 4 × 10 = 380 out of 500.
On maximum load alone, Wax A wins. On the things that decide whether a customer reorders, Wax B wins by a wide margin. That reversal is exactly why a single-number comparison is risky.
Running the comparison
How big a score gap is meaningful
Scores of 1–5 on a handful of candles are rough. A gap of a few points out of 500 between two waxes is a tie, not a win. Treat totals within a small margin you set in advance, for example 20 points, as level and let cost per candle or a repeat test decide. A large gap, like the 90 points in the example, is a real difference worth acting on.
If two waxes tie, the tiebreak should be the criterion carrying the most commercial risk for you. For a brand shipping in summer that is usually heat stability; for a gift brand selling mostly in cool showrooms it might be appearance or throw.
Appearance can be added as a sixth criterion if it matters to your brand, for example a smooth top for a gift range or a particular finish for a premium line. Give it a weight from the start rather than letting a pretty candle sway the result after the scores are in. A wax that looks lovely and weeps in a parcel is still a wax that weeps in a parcel.
What to buy
Use maximum load as a filter, not a ranking: it removes waxes that cannot reach the load your oils need, and nothing more. Rank the survivors on throw, burn and heat, then let cost per candle break any close result.
For the test itself, 1 kg packs of each shortlisted wax are usually enough for a three-step ladder with one oil. Once one wax wins, validate it with the rest of your oils before you buy in 5 kg or 10 kg packs, and ask for larger quantities on WhatsApp only after that validation is complete.
Where this page fits
CSI already has guides that cover parts of this question. This page answers one sweating decision; these cover the neighbouring questions:
Three things to buy for this fix
| Option | Price | Status on the October 2026 pull |
|---|---|---|
| 500 g | ₹325.00 | In stock |
| 1 kg | ₹650.00 | In stock |
| 5 kg | ₹3,185.00 | In stock |
| 10 kg | ₹6,370.00 | In stock |
| Option | Price | Status on the October 2026 pull |
|---|---|---|
| 500 g | ₹299.00 | In stock |
| 1 kg | ₹599.00 | In stock |
| 5 kg | ₹2,995.00 | In stock |
| 10 kg | ₹5,999.00 | In stock |
| Option | Price | Status on the October 2026 pull |
|---|---|---|
| 500 g | ₹260.00 | In stock |
| 1 kg | ₹507.40 | In stock |
| 5 kg | ₹2,537.00 | In stock |
| 10 kg | ₹5,074.00 | In stock |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials and production equipment, not finished candles. This guide separates general formulation practice from what CSI's own product pages state, converts the pages' wax-weight loads to the total-weight basis used here, says plainly where CSI publishes no figure (wax heat resistance, survival temperatures, oil composition beyond the page), and labels every load step, test temperature, observation day or reject rate as a starting point for your own validation.
Prices are live CSI prices from October 2026; product pages are authoritative. Where a spec is not published — such as the temperature at which a wax starts to release oil — this guide says so rather than filling the gap.
For bulk quotes, GST invoicing, IFRA and MSDS documents, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- My Current Wax Is Cheap but Repeatedly Gives Fragrance-Separation Problems — How Do I Calculate Whether a Better Wax Is Actually Cheaper After Rejects?
- A More Expensive Wax Allows Me to Manufacture Stable Candles With Fewer Failed Batches — How Do I Calculate Its True Production Cost?
- Should I Buy 25 Kg of a New Wax Immediately Because One Fragrance Stopped Sweating or Validate Multiple Fragrances First?
- How Many Fragrance Formulas Should I Test in a New Wax Before Switching My Entire Candle Production to It?
- How Do I Qualify a Wax for Commercial Purchase Using Fragrance Compatibility, Load Tolerance, Hot Throw, Burn Performance, Appearance and Stability?
- I Reduced Fragrance From 10% to 8% but the Candle Still Sweats — How Do I Determine Whether the Fragrance Oil Itself Is Incompatible With My Soy Wax?
- My Fragrance Separates in One Soy Wax but Stays Stable in Another — Does This Mean I Should Change Wax Rather Than Fragrance?
- My Fragrance Works Perfectly in Paraffin but Leaks From Pure Soy Wax — What Does This Suggest About Wax-Fragrance Compatibility?
- Best Candle Wax for Pan-India Shipping in Hot Weather
- I Need a Candle Formula That Can Handle Indian Summer Storage Without Sweating — How Should I Select Wax and Fragrance Load Before Commercial Production?
Customer reviews: The reviews at the top are genuine, published Judge.me reviews — Antara Srinivas Iyer (5★, verified); Lalitha Jagan (5★, not recorded as verified); Subhankar Roy (4★, verified); Delcy Fernandes (5★, verified); Sooraj R (5★, verified); Akansha (4★, verified). Names, ratings, dates and products as recorded by Judge.me.
Product facts (October 2026, CSI live store): Premium Coconut Soy Wax CSI 468 (flakes): 500 g ₹325.00, 1 kg ₹650.00, 5 kg ₹3,185.00, 10 kg ₹6,370.00 — coconut-soy blend · stated melt point 50–53°C, pour 58–60°C · stated fragrance load up to 13% · stated shelf life 60 months. Luxury Soy Wax Chunks: 500 g ₹299.00, 1 kg ₹599.00, 5 kg ₹2,995.00, 10 kg ₹5,999.00 — container and jar wax · stated maximum fragrance load 13% of wax weight · product page states prices are inclusive of taxes. Luxury Soy Wax CSI 464 (flakes): 500 g ₹260.00, 1 kg ₹507.40, 5 kg ₹2,537.00, 10 kg ₹5,074.00 — 100% soy container wax in flakes · single pour · stated fragrance load up to 10% · stated shelf life 60 months (cool, dry storage).
Assumptions: Fragrance load is a percentage of total candle weight (200 g = 184 g wax + 16 g oil at 8%); CSI wax pages phrase their ceilings as a share of wax weight. CSI wax pages state fragrance loads as a share of wax weight; converted here to total weight with W ÷ (100 + W) (10% of wax = 9.09% of the candle; 13% = 11.50%). A stated maximum is the wax maker's ceiling for typical oils, not a promise for every oil. CSI publishes no wax heat-resistance or survival temperature; every test temperature, observation day, load step, reject rate and labour or energy cost is a suggested starting point or the reader's own figure. Blends with microcrystalline wax, Vybar, paraffin or Soy Pillar Wax are the maker's own to test. Wax prices re-checked 7 October 2026, oil prices 1 October 2026; product pages are authoritative.