Should I Test a Difficult Fragrance at 6%, 8% and 10% Across Two Waxes to Identify Whether Load or Wax Compatibility Is Responsible?
शेयर करना
Which two waxes? Your production wax and a meaningfully different one, for example CSI 464 (100% soy) and CSI 468 (coconut-soy).
Is 10% safe to include? Include it, but know that 10% of the candle is 11.11% of wax weight, above CSI 464's stated up to 10%, so that cell is expected to be at risk.
How much oil does it need? With two 200 g candles per cell: 2 × (12 + 16 + 20) × 2 = 192 g of oil.
Why a grid beats one-at-a-time testing
When an oil sweats, two explanations compete. Either you are using more of it than any reasonable wax would hold, or this oil and this wax are a poor pairing at any load. Testing them one at a time means a full observation window for the load question, then another for the wax question, and the second test is run on a different day with a different batch. A small grid answers both in one window, and because everything is poured together, the comparisons are fair.
The grid has two axes: load (6%, 8% and 10% of total weight) and wax (your production wax and one meaningfully different wax). That makes six cells. Two candles per cell is a suggested starting point, so a single odd candle cannot mislead you.
Convert the loads before you pour
This series measures load as a share of the whole candle; CSI wax pages state it as a share of wax weight. Before you interpret anything, put the grid on the wax page's basis. In a 200 g candle:
| Grid load (total) | Oil + wax | Working | Share of wax weight | vs CSI 464 (up to 10%) | vs CSI 468 (up to 13%) |
|---|---|---|---|---|---|
| 6% | 12 g + 188 g | 12 ÷ 188 × 100 | 6.38% | Within | Within |
| 8% | 16 g + 184 g | 16 ÷ 184 × 100 | 8.70% | Within | Within |
| 10% | 20 g + 180 g | 20 ÷ 180 × 100 | 11.11% | Above | Within |
The 10% cell in CSI 464 is already above the page's stated figure, so sweat there is the least surprising result on the grid. It still belongs in the test, because it shows whether your oil behaves as expected at the edge, and whether the second wax holds it where the first does not. Remember that a stated maximum is a ceiling for typical oils; an oil can sweat below it.
Pour the grid in one session
Read the pattern, not the single candle
Lay out the results as a grid of dry and wet cells. The shape of the wet cells is the answer.
| Pattern | What it points to | Next step |
|---|---|---|
| Wet at 10% in both waxes; dry at 6% and 8% | Load: the oil holds up to about 8% in either wax | Approve 8% or lower in your current wax after a burn test |
| Wet at 10% and 8% in your wax; dry at all loads in the second | Compatibility: the oil holds better in the second wax | Run lower in your wax, or move this scent to the second wax |
| Wet at all loads in your wax; dry in the second | Strong pairing problem with your wax | Do not keep cutting load; change wax for this scent or change the oil |
| Wet at all loads in both waxes | The oil, or your process, is the issue | Check process with a control oil, then replace the oil |
| Dry everywhere | Neither; the original sweat came from elsewhere | Investigate the original batch's process and storage |
If the two candles in a cell disagree, treat the cell as unreliable and repeat it rather than picking the result you prefer. A split cell often means a process slip, such as one candle poured cooler or stirred less.
Interpreting partial patterns
Real grids are not always tidy. You may see the 10% cells wet in both waxes, and only a faint film on one of the two 8% candles in your wax. Treat a faint film the same as a clear bead if it returns after wiping; a lighter fault is still a fault. If the 8% result is split between the two candles, repeat that cell before deciding. If the repeat is dry, your practical ceiling is around 8% in that wax; if it is wet, approve 6% and check the throw.
Also watch timing. A cell that turns wet only at day 14 is telling you something different from one that is wet on day 1. Early sweating usually points to a load the wax simply cannot hold; late sweating may involve storage temperature or a slow settling of the wax. Note the first day each cell showed oil, not just whether it did.
Add a control if you can
If you have spare jars, pour one extra candle per wax with an oil you already trust, at 8%. If the control stays dry, your process and storage are not to blame for anything the grid shows. If the control sweats too, set the grid aside and fix the process before reading any cell.
Materials and cost
With two candles per cell, the difficult oil needs 2 × (12 + 16 + 20) × 2 = 192 g across the grid. Each wax needs 2 × (188 + 184 + 180) = 1,104 g, so a 1 kg pack alone falls short.
For CSI 464, buy 1 kg and 500 g: ₹507.40 + ₹260.00 = ₹767.40. For CSI 468, the same split costs ₹650.00 + ₹325.00 = ₹975.00. Together the wax for the grid is ₹767.40 + ₹975.00 = ₹1,742.40, with about 396 g of each wax left over for repeats. Twelve matte jars come in a pack of 10 and a pack of 5: ₹708.00 + ₹354.00 = ₹1,062.00, leaving three spare. Wicks, packaging, labour and GST are extra.
If budget is tight, you can halve the grid to one candle per cell and use 96 g of oil and 552 g of each wax, which a single 1 kg pack covers. You lose the protection of a duplicate in every cell, so treat any surprising result as provisional and repeat it before acting on it.
For the oil, two 100 g bottles cover 192 g with a little to spare. If your difficult oil is your own from another source, use it exactly as you received it; a new lot is a new test.
After the grid: burn and buy
Burn-test only the cells that stayed dry, starting with the highest dry load in the wax you would actually use. A load that is stable but drowns the wick or throws weakly is not your answer; step down one cell and test again. CSI publishes no wick chart, so the wick in your jar is part of what you are approving. Never leave a test burn unattended.
Then buy for the result. If 8% in your current wax passed, you need no new wax at all, and every candle uses 16 g of oil instead of 20 g. If the second wax held loads your wax could not, pilot one product in it from a 5 kg pack before converting anything else. And if the oil failed everywhere, the grid has saved you from buying a kilogram of an oil you cannot use.
Where this page fits
CSI already has guides that cover parts of this question. This page answers one sweating decision; these cover the neighbouring questions:
Three things to buy for this fix
| Option | Price | Status on the October 2026 pull |
|---|---|---|
| 500 g | ₹325.00 | In stock |
| 1 kg | ₹650.00 | In stock |
| 5 kg | ₹3,185.00 | In stock |
| 10 kg | ₹6,370.00 | In stock |
| Option | Price | Status on the October 2026 pull |
|---|---|---|
| 500 g | ₹260.00 | In stock |
| 1 kg | ₹507.40 | In stock |
| 5 kg | ₹2,537.00 | In stock |
| 10 kg | ₹5,074.00 | In stock |
| Option | Price | Status on the October 2026 pull |
|---|---|---|
| Pack of 5 | ₹354.00 | In stock |
| Pack of 10 | ₹708.00 | In stock |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials and production equipment, not finished candles. This guide separates general formulation practice from what CSI's own product pages state, converts the pages' wax-weight loads to the total-weight basis used here, says plainly where CSI publishes no figure (wax heat resistance, survival temperatures, oil composition beyond the page), and labels every load step, test temperature, observation day or reject rate as a starting point for your own validation.
Prices are live CSI prices from October 2026; product pages are authoritative. Where a spec is not published — such as the temperature at which a wax starts to release oil — this guide says so rather than filling the gap.
For bulk quotes, GST invoicing, IFRA and MSDS documents, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- My Fragrance Gives Strong Hot Throw at 6% in One Wax but Needs 9% in Another — Should Fragrance Load Always Be Optimised Separately for Each Wax?
- My Fragrance Is Stable at 6% but Sweats at 8% — Is 6% Automatically the Commercial Maximum for That Wax-Fragrance Combination?
- If 6% Fragrance Gives Strong Hot Throw and Excellent Stability, Is There Any Reason to Force the Formula to 10%?
- My Customer Thinks a 12% Fragrance Candle Must Be Stronger Than an 8% Candle — How Do I Formulate for Actual Performance Rather Than Marketing Percentages?
- My New Wax Holds More Fragrance but Gives Weaker Hot Throw — Should Higher Fragrance Capacity Influence My Wax Purchase Decision?
- Should I Compare Candle Waxes Using Stable Fragrance Load, Hot Throw, Burn Behaviour and Indian Heat Resistance Rather Than Maximum Load Alone?
- My Current Wax Is Cheap but Repeatedly Gives Fragrance-Separation Problems — How Do I Calculate Whether a Better Wax Is Actually Cheaper After Rejects?
- A More Expensive Wax Allows Me to Manufacture Stable Candles With Fewer Failed Batches — How Do I Calculate Its True Production Cost?
- Should I Buy 25 Kg of a New Wax Immediately Because One Fragrance Stopped Sweating or Validate Multiple Fragrances First?
- My Candle Is Fine at 8% Fragrance Load but Sweats at 10% — Should I Accept 8% as the Practical Maximum Even if the Wax Supplier Claims 12% Capacity?
- Candle Sweating Troubleshooting — Wax, Fragrance Load, Mixing or Temperature?
Customer reviews: The reviews at the top are genuine, published Judge.me reviews — Thenirvaofficial (5★, verified); Kaushiki Satarkar (5★, verified); Monika Deep (4★, verified); Suvarna P (5★, verified); Judy Roy (5★, verified); Akanksha Sharma (5★, verified). Names, ratings, dates and products as recorded by Judge.me.
Product facts (October 2026, CSI live store): Premium Coconut Soy Wax CSI 468 (flakes): 500 g ₹325.00, 1 kg ₹650.00, 5 kg ₹3,185.00, 10 kg ₹6,370.00 — coconut-soy blend · stated melt point 50–53°C, pour 58–60°C · stated fragrance load up to 13% · stated shelf life 60 months. Luxury Soy Wax CSI 464 (flakes): 500 g ₹260.00, 1 kg ₹507.40, 5 kg ₹2,537.00, 10 kg ₹5,074.00 — 100% soy container wax in flakes · single pour · stated fragrance load up to 10% · stated shelf life 60 months (cool, dry storage). Matte / Frosted Glass Jar (200 ml): Pack of 5 ₹354.00, Pack of 10 ₹708.00 — page states "fill weight of 200 ml" and "Height 8 cm width 7 cm" (outer size); several colours, some out of stock.
Assumptions: Fragrance load is a percentage of total candle weight (200 g = 184 g wax + 16 g oil at 8%); CSI wax pages phrase their ceilings as a share of wax weight. CSI wax pages state fragrance loads as a share of wax weight; converted here to total weight with W ÷ (100 + W) (10% of wax = 9.09% of the candle; 13% = 11.50%). A stated maximum is the wax maker's ceiling for typical oils, not a promise for every oil. CSI publishes no wax heat-resistance or survival temperature; every test temperature, observation day, load step, reject rate and labour or energy cost is a suggested starting point or the reader's own figure. Blends with microcrystalline wax, Vybar, paraffin or Soy Pillar Wax are the maker's own to test. Wax prices re-checked 7 October 2026, oil prices 1 October 2026; product pages are authoritative.