I Am Making Car Perfume Sprays With a Hotel Lobby Fragrance — How Do I Test Whether the Oil Remains Clear in My Spray Base?
Share
What load do I use? The spray base's own published figures, not the reed base's. It states "Add 8-15% fragrance oil or essential oil blend", names 8% light, 10% recommended, 15% maximum, and asks for a 12-24 hour rest before bottling. The reed and car diffuser bases publish something different — 10-30%, a 25-30% working ratio, a 24-48 hour rest — and the two must not be mixed up.
How do I test clarity? Small, at the load you intend to sell at, against a control of plain base in an identical vessel, rested the published 12-24 hours, then read at the warmest and the coolest condition you can actually reproduce. Write down what you see at every reading.
Will my oil stay clear? Unknown, and this page will not guess. CSI publishes no clarity, solubility or compatibility data for any individual fragrance oil, and the base page's own claim of single-phase clarity is a claim about the base with most oils, not a prediction about yours.
What if it clouds? Follow the page: reduce the percentage and retest, and do not add water. The page also tells you to filter through a fine mesh if any particulate shows after resting.
Use the base's own published numbers, because they are not the ones you have been using for car bottles. The spray base page states "Add 8-15% fragrance oil or essential oil blend", names 10% as the recommended starting load and 15% as the maximum, asks for a 12-24 hour rest before bottling, and gives the order of addition: oil into the vessel first, then base up to the total weight. The reed and car diffuser bases publish a different window entirely — "Blend with 10-30% fragrance oil", a 25-30% working ratio and a 24-48 hour rest. A spray built at 25% is well outside its own base's stated range, and if your hanging-bottle habits have carried over, that alone may be your clarity problem.
The base page also hands you the decision rule, which is worth more than any opinion this page could offer: "The blend should remain clear. If clouding occurs, the fragrance oil may not be fully compatible at that load — reduce percentage and retest." And: "Do not add water to resolve clouding." And: filter through a fine mesh if particulate shows after resting. That is the method, published by the manufacturer of the base, and it is the one to follow.
What nobody can tell you — not this page, not any page on this site — is whether your oil will stay clear. CSI publishes no clarity, solubility, cloud-point or compatibility figure for any individual fragrance oil. The base page claims single-phase clarity with most fragrance oils; that is a claim about the base, stated by the base page, and it is not a prediction about the specific oil in your hand. Which is exactly why the trial costs ₹35.96 and takes one evening plus a rest.
What a hotel lobby brief turns into on a spray bench
Two facts about the "hotel lobby fragrance" half of your question, stated once so the rest of the page can be about the test. There is no hotel-branded, hotel-named or hotel-licensed fragrance oil in the CSI range — no listing contains a hotel group's name, and none contains the words "hotel" or "lobby". Naming a hotel describes a scent direction a reader asked about, never an affiliation or endorsement. And two of the materials that hotel-direction briefs most often ask for are simply absent: there is no white tea oil and no musk oil of any kind in the range. If your current spray is built on either of those, it was not bought here, and this page is about your base rather than your oil.
What that leaves is the part of the product you can actually control and cost. On a spray bench a "hotel lobby" brief resolves into four decisions: which listed oil, at what load, in which base, in what bottle. Three of those four have published numbers attached, and the fourth — the oil — is where your clarity trial lives. So the useful work is: pick one or two candidate oils from the listings that do exist, trial each at three loads inside the base's published window, and let the results decide rather than the brief.
| What a car-spray maker needs | Listed? | Price and stock | What it publishes |
|---|---|---|---|
| A spray base | Yes | Room & Linen Spray Base 500 g ₹999.00 · 75 units | 8-15% load, 10% recommended, 15% maximum, 12-24 hour rest, clear single-phase, do not add water |
| A spray bottle with a pump | Yes | 50ml Room Spray Bottle with Golden Spray ₹42.00 · 90 units | Pump included; the page states no spray volume per actuation |
| A car-specific spray bottle | No | — | The 50 ml room bottle is the only spray bottle in this collection |
| A replacement pump on its own | No | — | Nothing listed; a damaged pump means a new bottle |
| A vent clip | No | — | Not in the range at all |
| A hotel-named fragrance oil | No | — | No "hotel" or "lobby" title in any listing |
| A white tea or a musk oil | No | — | Zero listings for either, at any rung |
| A hanging 12 ml car bottle | Yes | Pack of 12 ₹600.00 · 4,961 units · ₹50.00 each | Wooden cap mechanism; a different product and a different base window |
One consequence of the stock position is worth planning around now rather than later: 90 bottles is the whole runway at the time of writing. If your first spray launch is 200 units, the bottle is the constraint, not the base and not the oil — one 500 g pack of base makes about eleven 50 g fills, so the base scales in ₹999 steps while the bottles do not. Check the bottle's stock before you commit to a quantity, and ask on WhatsApp if you need more than what is showing.
Two bases, two published windows
This is the single most useful thing on the page for anyone who already makes hanging car bottles and is adding a spray. The same fragrance oil has two different published ceilings depending on which base it goes into, and they are not close. Carrying the hanging-bottle ratio onto a spray bench puts you at roughly twice the spray base's stated maximum before you have done anything wrong on purpose.
| What the page publishes | Room & Linen Spray Base | Reed & car diffuser bases |
|---|---|---|
| Stated load window | 8-15% fragrance or essential oil blend | 10-30% fragrance oil |
| Recommended starting point | 10% | 25-30% working ratio |
| Stated maximum | 15%, with a note to test clarity at that level | 30% |
| Rest before bottling | 12-24 hours | 24-48 hours |
| Order of addition | Oil into the vessel first, then base up to the total weight | Not specified in the same terms |
| Sold by | Weight — 500 g for ₹999 = ₹1.998/g | Volume on the ₹1,099 500 ml packs = ₹2.198/ml; Pure Performance also lists a 100 g pack by weight |
| If it clouds | Reduce the percentage and retest; do not add water; filter if particulate shows | No equivalent instruction published |
| Published clarity claim | Clear, colourless, single-phase; stays clear through seasonal changes, with most fragrance oils | No clarity claim published |
| Oil in a 20 g trial | 1.6 g to 3.0 g | 2.0 g to 6.0 g |
Read the last row twice. On a 20 g basis the spray base tops out at 3.0 g of oil and the reed base tops out at 6.0 g — exactly double. A maker who has spent six months building 12 ml hanging bottles at 3 g of oil in 12 g of charge has their hand trained to 25%, and 25% in this spray base is ten points above its stated maximum. If your spray has clouded and you cannot work out why, the first thing to check is not the oil. It is the percentage, and the fix is published: reduce it and retest.
One clarity trial, priced to the paisa
A clarity trial is one oil, at one load, in one vessel, rested, read against a control. That is the unit this page works in, and the reason to define it tightly is that the moment you start varying two things at once you no longer know which one caused the haze. Here is what one trial costs, and what a full nine-cell set costs, at live prices.
One convention first, and it is a real one rather than a quibble. The base is sold by weight and the bottle is described by volume, and no CSI page publishes a density for the base or any oil. So every figure in this post is in grams, which is how the base page itself works — its own worked example is "90 g base + 10 g fragrance oil = 100 g spray". Where a 50 ml bottle is costed as holding 50 g, that is a stated assumption of density 1.0, flagged each time. In practice you fill to the shoulder and record the weight that went in, which makes your costing exact regardless of what the density turns out to be.
| Load | Base in a 20 g trial | Base cost | Oil | Tangerine at ₹11.98/g | Verbena at ₹5.90/g | Neroli Signature Grade at ₹7.99/g |
|---|---|---|---|---|---|---|
| 8% — published light | 18.4 g | ₹36.76 | 1.6 g | ₹19.17 → ₹55.93 | ₹9.44 → ₹46.20 | ₹12.78 → ₹49.54 |
| 10% — recommended | 18 g | ₹35.96 | 2.0 g | ₹23.96 → ₹59.92 | ₹11.80 → ₹47.76 | ₹15.98 → ₹51.94 |
| 15% — published maximum | 17 g | ₹33.97 | 3.0 g | ₹35.94 → ₹69.91 | ₹17.70 → ₹51.67 | ₹23.97 → ₹57.94 |
| Control — base alone | 20 g | ₹39.96 | none | One vessel, no oil, same fill level, read at every checkpoint alongside the trials | ||
₹530.77 for a complete answer about three oils across the whole published window, with a control, before a single bottle is filled. Compare that with the alternative: one 500 g pack of base at ₹999 plus eleven bottles at ₹42 and the oil to go with them, discovered to be hazy after it has been filled. The trial is not a luxury or a formality — it is nine-tenths cheaper than the mistake, and it is the only version of this question anyone can answer, because no clarity data is published for any individual oil.
Running the trial
Eight steps. The order matters, particularly steps two and three, which come straight off the base page. Nothing here predicts an outcome for your oil, and nothing here should be skipped because the first vessel looked fine.
What gets recorded — and what clarity is not
A trial that is not written down has to be run again, so the log is part of the method rather than an administrative extra. Nine columns, one row per vessel per reading, and the control gets its own rows exactly like the trials do.
| Column | What goes in it | Why |
|---|---|---|
| Trial code | A short code on tape, not the load | Lets a second person read the vessels without knowing what they should see |
| Exact listed oil title and rung | Copied from the product page | Near-identical sibling listings exist; "neroli" is not an identification |
| Base title and pack | Room & Linen Spray Base 500 g, or the reed base if you are comparing | The two publish different windows entirely |
| Load as weighed | Oil grams and base grams, not the intended percentage | The percentage is a calculation; the grams are the fact |
| Reading point | On mixing / after rest / warm / cool, with the rest duration | Clouding that appears late is still clouding |
| Clarity vs control | One sentence comparing this vessel with the control | Forces a comparison instead of an absolute judgement |
| Particulate and separation | None / described, and whether it filtered out | The page's own remedy is filtering, so record whether it worked |
| Condition named | "Windowsill, afternoon", "storeroom floor" | No temperature figure is published, so your own named conditions are the record |
| Decision | Pass / reduce and retest / reject this pairing | Ends the trial with an action rather than a doubt |
Now the limits, because they matter as much as the method. Clarity is not strength. A perfectly clear blend at 8% may be weaker than you want and a hazy one at 15% may be stronger; those are two separate questions and the clarity trial answers only one of them. Clarity is not stability over months. Four readings across a day or two tell you about mixing and about two conditions; they do not tell you what the bottle looks like in April. If shelf life matters to your product, keep two filled bottles aside, unopened, and read them again at fixed intervals — your own observation is the only data that will exist, because no shelf-life figure is published for this base or any oil.
And clarity is not spray performance. The base page recommends a fine-mist, high-output trigger or pump of approximately 0.3-0.5 ml per spray, and the 50 ml bottle page publishes no spray volume per actuation at all — it describes a golden spray mechanism and a fine spray coverage, which is page copy rather than a specification. So whether this particular pump delivers inside that recommended range is something you can establish in two minutes with the scale you already own: weigh the filled bottle, actuate it ten times, weigh it again, divide by ten. That gives you grams per spray, which is a number you own and nobody has published.
Costing a spray by mass
Because the base is sold by weight, spray costing is cleaner than hanging-bottle costing — there is no millilitre-to-gram conversion sitting in the middle of it. One rate does all the work: ₹999 ÷ 500 g = ₹1.998 per gram. The only assumption left is how many grams go into a 50 ml bottle, and the table below states it as 50 g while flagging that this assumes a density of 1.0 that no page publishes.
| Load | Base | Base cost | Oil | Bottle | With Verbena at ₹5.90/g | With Tangerine at ₹11.99/g |
|---|---|---|---|---|---|---|
| 8% | 46.0 g | ₹91.91 | 4.0 g | ₹42.00 | ₹23.60 → ₹157.51 | ₹47.96 → ₹181.87 |
| 10% — recommended | 45.0 g | ₹89.91 | 5.0 g | ₹42.00 | ₹29.50 → ₹161.41 | ₹59.95 → ₹191.86 |
| 15% — maximum | 42.5 g | ₹84.92 | 7.5 g | ₹42.00 | ₹44.25 → ₹171.17 | ₹89.93 → ₹216.85 |
Two things fall out of this that are worth more than the totals. First, the carrier and the bottle dominate: at 10% with Verbena, ₹131.91 of the ₹161.41 is base and bottle and only ₹29.50 is oil. That is the opposite balance from the 12 ml hanging bottle, where hardware plus carrier is ₹69.78 at the published 25% working ratio and the oil is the swing factor. On a spray, choosing a dearer oil moves the unit cost far less than you expect — Tangerine instead of Verbena adds ₹30.45 at 10% — so the clarity result should decide the oil, not the price per gram.
Second, the yield. One 500 g pack at 10% makes 500 ÷ 0.90 = 555.6 g of finished spray, about eleven 50 g fills, needing 55.6 g of oil. At 8% it is 543.5 g and ten fills; at 15%, 588.2 g and eleven. On a purchased-pack basis that is ₹999 ÷ 11 = ₹90.82 of base per bottle rather than the ₹89.91 of base actually consumed — a rupee of rounding you should carry in your costing rather than ignore, because packs do not divide neatly into bottles. And with 90 bottles in stock, a full run against today's hardware is 4,500 g of spray: 4,050 g of base, which is nine packs at ₹8,991 with 450 g left over, 450 g of oil, and ₹3,780 of bottles.
What to buy
Four items: the base, the bottle, one oil to trial that is deeply stocked at a sample rung, and the reed base — included deliberately, because comparing the two windows side by side on your own bench is the fastest way to internalise that they are different products.
| Published figure | Value | On a 20 g trial |
|---|---|---|
| Pack and price | 500 g · ₹999.00 · 75 units | ₹1.998 per gram |
| Light load | 8% | 18.4 g base + 1.6 g oil · ₹36.76 of base |
| Recommended load | 10% | 18 g base + 2.0 g oil · ₹35.96 of base |
| Maximum load | 15% | 17 g base + 3.0 g oil · ₹33.97 of base |
| Rest before bottling | 12-24 hours | Applies to the control too |
| Yield at 10% | 555.6 g of spray | About eleven 50 g fills |
| Item | Price | Units | Note |
|---|---|---|---|
| 50ml Room Spray Bottle with Golden Spray | ₹42.00 | 90 | Pump included; no spray volume published |
| 90 bottles, filled at 10% | ₹3,780.00 of bottles | — | Needs 4,050 g base (nine packs, ₹8,991) and 450 g oil |
| Car-specific spray bottle | — | 0 | Not listed |
| Replacement pump alone | — | 0 | Not listed |
| Size | Price | Per gram | Units |
|---|---|---|---|
| 15g | ₹199.00 | ₹13.2667 | 97 |
| 50g (cheapest gram) | ₹599.00 | ₹11.98 | 1,110 |
| 100g | ₹1,199.00 | ₹11.99 | 111 |
| 500g | ₹5,999.00 | ₹11.998 | 111 |
| 1kg (₹9 dearer than ten 100 g) | ₹11,999.00 | ₹11.999 | 111 |
| Variant | Price | Unit rate | Units |
|---|---|---|---|
| 100g (sold by weight) | ₹325.00 | ₹3.25 per gram | 65 |
| 500 ML (sold by volume) | ₹1,099.00 | ₹2.198 per millilitre | 59 |
| Other ₹1,099 bases | Depth, Lift, Softness | ₹2.198 per millilitre | 983 / 68 / 98 |
| Longevity Base | ₹1,296.00 | ₹2.592 per millilitre | 41 |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials, not finished car perfumes. This page contains a correction against our own earlier working assumption: we had taken it that no spray hardware existed in the range, and it does — a base and a bottle with its pump, both in stock, both priced above. It also tells you something no supplier enjoys writing: we cannot predict whether your oil will stay clear in this base, because no clarity, solubility, cloud-point or compatibility figure is published for any individual CSI fragrance oil. The base page claims single-phase clarity with most fragrance oils; "most" is the page's word and your oil is a specific case.
Every price, pack size and unit count here comes from live CSI data in October 2026 and links to the product page, where current pricing always takes precedence. Load, rest, order-of-addition, clouding-remedy and surface-caution figures are quoted from the product pages that publish them: 8-15% with 10% recommended, 15% maximum and a 12-24 hour rest on the Room & Linen Spray Base; "Blend with 10-30% fragrance oil", a 25-30% working ratio and a 24-48 hour rest on the reed and car diffuser bases. The spray base's cautions — external use only, spot test unfamiliar fabrics, avoid direct spray on screens, polished wood or unfinished leather, do not add water, store cool and dark — are its own published wording. No spray volume per actuation is published for the 50 ml bottle, so none is quoted.
For bulk pricing, GST invoicing, documentation, or to ask about spray bottles beyond the quantity showing, message us on WhatsApp at +91 7397976926. Safety, labelling and transport decisions go to a qualified adviser.
Frequently asked questions
- Solubility, heat and diffusion tests for the 12 ml format
- Citrus, incense, cedarwood and aromatic oils for a spray
- The four-slot hotel lobby brief — which two CSI can fill
- Ready-blended oils or your own blend — the ratio grid
- Comparing 100 g samples without expecting a match
- Sourcing, testing, safety and branding — the cluster capstone
Customer reviews: The ten reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on their product pages. Names, star ratings, dates and products are as recorded by Judge.me; wording is unedited.
Published figures quoted, October 2026. Room & Linen Spray Base: "Add 8-15% fragrance oil or essential oil blend"; 8% light, 10% recommended, 15% maximum with clarity to be tested at that level; rest 12-24 hours before bottling; worked example 90 g base + 10 g oil = 100 g spray; order of addition oil first, then base to total weight; "The blend should remain clear. If clouding occurs, the fragrance oil may not be fully compatible at that load — reduce percentage and retest"; "Do not add water"; filter through a fine mesh if particulate shows after resting; clear, colourless, single-phase; external use only; spot test unfamiliar fabrics; avoid direct spray on screens, polished wood or unfinished leather; store cool and dark; recommended sprayer a fine-mist trigger or pump of approximately 0.3-0.5 ml per spray. Reed and car diffuser bases: "Blend with 10-30% fragrance oil", a 25-30% working ratio and a 24-48 hour rest before bottling. The 12 ml bottle page: "Wooden lid absorbs oil and gently releases scent over time", and a 12 ml title against a 20 ml handle and body copy, named here and not resolved. No spray volume per actuation is published for the 50 ml bottle, and no clarity, solubility, cloud-point, compatibility or shelf-life figure is published for any individual fragrance oil.
Prices and stock, live October 2026: Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g) ₹999.00, 75 units, ₹1.998/g. 50ml Room Spray Bottle with Golden Spray ₹42.00, 90 units, pump included. Tangerine 15 g ₹199.00 (97), 50 g ₹599.00 (1,110), 100 g ₹1,199.00 (111), 500 g ₹5,999.00 (111), 1 kg ₹11,999.00 (111) — ₹13.2667 / ₹11.98 / ₹11.99 / ₹11.998 / ₹11.999 per gram, the kilo ₹9 dearer than ten 100 g packs. Verbena 100 g ₹590.00 (₹5.90/g). Neroli Signature Grade 100 g ₹799.00 (₹7.99/g). Pure Performance Reed Base Oil 100 g ₹325.00 (65) and 500 ML ₹1,099.00 (59); Depth ₹1,099.00 (983), Lift ₹1,099.00 (68), Softness ₹1,099.00 (98), Longevity ₹1,296.00 (41). Silicon Measuring Beaker 100 ML ₹300.00; the 250 ML is a separate listing at ₹600.00. Candle Making Weighing Scale ₹354.00. Glass Car Hanging Freshener with Wooden Cap (12 ml) Pack of 12 ₹600.00, 4,961 units, ₹50.00 a bottle. No car-specific spray bottle, no separately sold replacement pump and no vent clip exists in the range; no hotel-named fragrance oil, no white tea oil and no musk oil exists either.
Figures worked on this page: base grams = charge × (1 − load); base cost = grams × ₹1.998 (20 g trial: 18.4 g = ₹36.76, 18 g = ₹35.96, 17 g = ₹33.97, control 20 g = ₹39.96); trial totals with oil at a buyable rung — Tangerine ₹11.98/g: ₹55.93 / ₹59.92 / ₹69.91; Verbena ₹5.90/g: ₹46.20 / ₹47.76 / ₹51.67; Neroli Signature Grade ₹7.99/g: ₹49.54 / ₹51.94 / ₹57.94; nine trials plus control = ₹530.77 using 180.2 g of base. Per 50 g fill: base 46 g = ₹91.91, 45 g = ₹89.91, 42.5 g = ₹84.92; plus the ₹42.00 bottle, hardware and carrier is ₹133.91 / ₹131.91 / ₹126.92; with Verbena ₹157.51 / ₹161.41 / ₹171.17, with Tangerine ₹181.87 / ₹191.86 / ₹216.85. Yield from one 500 g pack: 500 ÷ 0.92 = 543.5 g (ten fills, 43.5 g oil), 500 ÷ 0.90 = 555.6 g (eleven fills, 55.6 g oil), 500 ÷ 0.85 = 588.2 g (eleven fills, 88.2 g oil); ₹999 ÷ 11 = ₹90.82 of base per bottle on a purchased-pack basis. Ninety bottles at 10% = 4,500 g of spray, 4,050 g of base (nine packs, ₹8,991, 450 g spare), 450 g of oil, ₹3,780 of bottles. Hanging-bottle comparison: ₹50.00 bottle + 9 ml × ₹2.198 = ₹69.78 at the published 25% working ratio, ₹73.33 on Longevity Base. Every 50 ml-to-50 g conversion assumes a density of 1.0, which no CSI page publishes; weigh your own fill. No clarity outcome is predicted here for any oil. Flash points are never used as an add temperature; documentation is available on request and safety, labelling and transport decisions go to a qualified adviser. Naming a hotel group describes a scent direction only and never an affiliation, endorsement or licence. Prices and availability change: the linked product pages are always authoritative.