I Am Making Reed Diffusers With Narrow-Neck Bottles — How Do I Evaluate Whether Bottle Geometry Reduces Excessive Evaporation During Summer?

I Am Making Reed Diffusers With Narrow-Neck Bottles — How Do I Evaluate Whether Bottle Geometry Reduces Excessive Evaporation During Summer?

 

Two listed bottle sizes · 50 ML ₹82.60 each · 120 ML ₹106.20 each No neck diameter published for either Stocked in India · ships nationwide
CSI diffuser guides · bottle geometry
A narrow neck is a plausible lever and an unpublished one. CSI states no neck diameter, no opening area and no fill line for either listed bottle, so the geometry in your hand is your own measurement — and changing the vessel re-opens the whole specification, not one line of it.
★★★★★
"Nice product"
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Reed & Car Diffuser Base
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base for Reed & Candle
★★★★★
"The jars were of good quality"
Soumili GopeVerified buyer · Mar 2026
Clear Glass Jar with Golden Lid
★★★★★
"Nice glass jars, they look cute. I like the packaging as well."
AshwiniSep 2025
Matte glass candle jars
★★★★★
"Very good"
Tina Lynette Lazaro MogantiVerified buyer · Dec 2025
Black Matte Glass Jar
★★★★★
"Quality is good with good fragrance"
Avanthi CheeliVerified buyer · Nov 2025
Citrus Lemon Fragrance Oil
★★★★★
"Good quality wood fragrance oil with a warm, long-lasting scent and strong performance in candles."
Payal PatelVerified buyer · Mar 2026
Woody Oud Fragrance Oil
★★★★★
"Fragrance is awesome. Hot throw is also very good after burn candle."
AkanshaVerified buyer · Dec 2025
Lavender Fragrance Oil
★★★★★
"Quality wick, works very well"
AshwiniSep 2025
Eco Candle Wicks
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store, unedited. None of them is evidence about bottle geometry, neck diameter or evaporation — most are candle observations, and the jar reviews are for candle jars rather than diffuser bottles.
✓ Only the specifications CSI actually publishes are quoted ✓ Two listed sizes, both priced here ✓ Bulk pricing & GST invoicing on WhatsApp
CSI Diffuser Guides · Bottle Geometry and Summer Evaporation

I Am Making Reed Diffusers With Narrow-Neck Bottles — How Do I Evaluate Whether Bottle Geometry Reduces Excessive Evaporation During Summer?

The honest shape of this question first. A narrower opening leaves less liquid surface exposed to the air, and less exposed surface carries less away — that is ordinary physical behaviour and it is fair to say out loud. What is not available is any number to support it from a catalogue page: CSI publishes no neck diameter, no opening area and no fill line for either of the two listed bottles. So every geometry figure on this page is one you take with a vernier caliper, and every evaporation figure is one you weigh. And there is a commercial trap inside the idea: changing the vessel is a re-qualification of the whole product, not a tweak to one line of the spec.
₹0.17
The number that kills the cheap version of this plan. At the 50 ML size and the published 25% ratio, the glass costs ₹82.60 and the base inside it costs ₹82.43 (37.5 ml × ₹2.198) — the bottle is ₹0.17 dearer than its own contents. Downsizing to slow evaporation is not a cheap move · CSI live pricing, October 2026
Quick answers — read this first
Does a narrower neck reduce evaporation? Less exposed liquid surface carries less away, so the direction is reasonable. The size of the effect in your bottle is not published by anyone and has to be weighed.

What does CSI publish about the bottles? Two variants and two prices. 50 ML Pack of 10 at ₹826 and 120 ML Pack of 10 at ₹1,062 — and no neck diameter, no opening area, no fill line and no wall thickness for either. One page line reads "Size: 50 and 100ml" against its own 50/120 ML variants; we name that and do not resolve it.

So what do I measure? Three things, with a caliper: the inside diameter of the neck, the depth from the rim to your fill line, and the diameter of one reed. The third is needed because the reeds occupy part of the opening — and CSI publishes no reed diameter either, while one reed page says "consistent diameter".

Is switching bottles a small change? No. A vessel change moves fill volume, reed immersion depth, the published 6–8 reeds for a 50–100 ml bottle band, cost per ml, cartoning and your label. Treat it as a qualification, run it as a paired weighed trial, and judge it on consumption and throw together.
The short answer
Measure before you theorise: neck inside diameter, rim-to-fill depth, reed diameter. Opening area is π × (d ÷ 2)², and the free area is that minus the area the reed bundle occupies. All three inputs are yours; none is published.
Then weigh, do not estimate: two vessels, same base lot, same oil lot, same load, same reed count, same room, weighed at the same hour on day 0, 7, 14, 21 and 28 with the caps off and the reeds in. Grams lost per day is the only honest comparison.
Read throw in the same breath: a vessel that slows consumption by restricting the opening can also smell of less. A bottle that lasts longer and fragrances nothing has not solved the problem — judge every vessel swap on both readings.
Three dimensions you measure — and the one reading that settles it WIDE OPENING NARROW OPENING ← neck inside diameter → ← smaller → fill line 1 neck inside diameter · 2 rim–to–fill depth · 3 reed diameter. CSI publishes none of the three. A caliper is the instrument. THE READING Day 0 weight, reeds in, cap off Day 7 · 14 · 21 · 28, same hour grams lost ÷ days = g/day Intensity note 0–5, same judge Room temperature you read Both halves, every checkpoint Slower AND throw held qualify it Slower AND throw lost reject it Two readings, one swap. Days alone is not a result; it is half of one. Held constant: base lot · oil lot · load · reed count · room · flip schedule · judge. Every temperature here is your own condition.
Left: the three dimensions a narrow-neck argument depends on, none of which appears on any CSI page — the neck inside diameter, the rim-to-fill depth and the reed diameter, which matters because the reeds take up part of the opening. Right: the only reading that can settle the question, and the two-axis verdict it feeds. A vessel that consumes less liquid and smells of less has not improved the product.
Straight answer
I am using narrow-neck bottles. How do I evaluate whether the geometry is actually reducing summer evaporation?
You evaluate it by measuring the geometry yourself and then weighing the bottles, because there is no published shortcut. The direction is defensible in plain physical terms: evaporation happens at exposed liquid surface and at the wetted reed above it, and a smaller opening leaves less of the first exposed — so a narrower neck plausibly slows the liquid loss that does not come through the reeds. But that sentence is as far as any honest page can go for you. CSI publishes no neck diameter, no opening area, no fill line and no wall thickness for either listed bottle, which means the quantity you want to compare does not exist as a catalogue number. Take a vernier caliper and record three figures: the inside diameter of the neck, the depth from the rim down to your fill line, and — because the reeds sit in the opening and block part of it — the diameter of one reed, which is also unpublished, on pages that say "consistent diameter" without stating one. Then build the comparison that reads the answer: two vessels, everything else identical, weighed with the reeds in and the cap off at day 0, 7, 14, 21 and 28, with a 0–5 intensity note beside every weight. Grams lost per day is yours; nobody can supply it. Two warnings before you order glass. First, a slower vessel is not automatically a better vessel: restricting the opening can restrict throw, and a bottle that lasts longer while smelling of less is a worse product, not a better one — so every vessel swap is judged on consumption and throw together. Second, do not assume downsizing is the cheap route. At 50 ML and the published 25% ratio the glass costs ₹82.60 against ₹82.43 of base inside it, and hardware per millilitre rises from ₹1.4183 at a full 120 ml with eight reeds to ₹2.612 at 50 ml with six — a 1.84× penalty for the smaller bottle.
One line: measure the opening with a caliper, weigh the bottles, read throw beside grams — and price the glass before you assume a smaller bottle is a cheaper fix.
The six-bottle vessel trial: one pack of ten 50 ML bottles ₹826 and one pack of ten 120 ML bottles ₹1,062, a 50-pack of black fibre reeds ₹400 for the 42 reeds it needs, one 500 ml base pack ₹1,099 and a ₹354 weighing scale — ₹3,381 of materials, most of it reusable stock.
Shop diffuser bottles

The three dimensions nobody publishes

A narrow-neck strategy needs three numbers. The catalogue supplies none of them, and that is the single most useful thing to know before you spend money on glass.

Start with what is actually on the listing, because it is short. The reed diffuser bottle page carries exactly two variants, both packs of ten: a 50 ML Pack of 10 at ₹826 and a 120 ML Pack of 10 at ₹1,062. That is ₹82.60 and ₹106.20 a bottle. Stock sits at 16 packs of the 50 ML and 24 of the 120 ML — which is 160 and 240 individual bottles, and worth knowing because on a large order glass is usually the line that binds first. That is a stock position on a particular day, not a ceiling on what the listed packs can supply, and it changes.

What the page does not carry is everything a geometry argument needs. There is no neck inside diameter, no neck outside diameter, no opening area, no stated fill line, no neck height and no wall thickness. There is no overflow capacity either, which matters more than it sounds: a bottle sold as 120 ml may hold more than 120 ml to the brim, and where you choose to stop filling is a decision you make rather than one the page makes for you. One further page detail belongs on the record because a careful reader will hit it: the body copy says "Size: 50 and 100ml" while the variants themselves are 50 ML and 120 ML. We name that, we route you to WhatsApp if the exact figure decides your purchase, and we do not resolve it here.

The third missing dimension is the one most makers forget. The reeds stand in the opening, so the free area for evaporation is the opening area minus what the reed bundle occupies — and no reed diameter, pore size or fibre count is published for either fibre reed, on pages that do use the phrase "consistent diameter". So even after you measure the neck perfectly, you cannot finish the calculation from catalogue data. You measure the reed too. That is not a complaint about the pages; it is the practical reason this post sends you to a caliper in the first paragraph rather than to a comparison table of specifications that does not exist.

What a geometry decision needs · and where each input actually comes from
Six inputs, their source, and what you can and cannot conclude from each
Input Published by CSI? How you get it What it lets you say
Neck inside diameter No Vernier caliper, inside jaws, three readings averaged Opening area as π × (d ÷ 2)² — your figure, labelled as yours
Rim-to-fill depth No Fill a bottle to your working line, measure down from the rim How far the vapour has to travel before it meets moving air
Reed diameter No — pages say "consistent diameter" without stating one Caliper across one dry reed, repeated on five reeds The area the bundle occupies, so free area can be estimated
Bottle capacity Yes, as the variant name — 50 ML and 120 ML The listing Nominal size only. Brim capacity and your fill line are separate decisions
Reed length Yes — 20.3 cm The reed pages How much reed stands above the rim at each bottle height
Evaporation rate for a given geometry No, for anything Weigh your own bottles at fixed checkpoints Grams per day, under your conditions, for your build
Worked out above: per-bottle prices are the pack price ÷ 10 — 826 ÷ 10 = ₹82.60 and 1,062 ÷ 10 = ₹106.20. Pack stock of 16 and 24 is 160 and 240 bottles. The opening-area formula is ordinary geometry, not a CSI figure: for a neck you measure at 21 mm inside diameter, π × 10.5² = 346.36 mm²; at 12 mm, π × 6² = 113.10 mm², a ratio of 3.06×. Those two diameters are illustrative values for showing the arithmetic — they are not CSI specifications and not measurements of the listed bottles. CSI live pricing and stock, October 2026.
The caliper discipline that makes your numbers worth keeping
Measure five bottles from the pack, not one, and write all five figures down rather than an average you cannot reconstruct. Glass necks vary within a production lot, and if your five readings spread by more than a millimetre then "narrow neck" is a range in your own stock rather than a fixed property of the design — which is itself a finding, and one worth raising with any supplier before you build a formula on it. Do the same with five reeds. Two minutes of measuring converts an opinion about geometry into a line you can defend to a customer.

The ₹0.17 inversion, and why downsizing is not cheap

Most makers who reach for geometry reach for a smaller bottle at the same time, on the reasonable-sounding theory that less liquid in a tighter vessel is cheaper and lasts longer. The second half may be true and is yours to weigh. The first half is false here, and the arithmetic is worth seeing in full because it changes what you buy.

Take the 50 ML bottle at the published 25% ratio. The fill is 37.5 ml of base plus 12.5 g of oil. The glass is ₹82.60. The base, at ₹2.198 a millilitre from the ₹1,099 500 ml packs, is 37.5 × 2.198 = ₹82.43. The bottle costs ₹0.17 more than the base inside it — ₹0.175 before rounding. Glass and base together are ₹165.03 an arm before a single reed or a single gram of fragrance. Nobody expects the container to outprice the contents, and at this size it does.

Now compare the two sizes on the only basis that matters commercially, which is cost per millilitre of product you can sell. At a full 120 ml with eight black reeds, hardware is ₹106.20 + ₹64.00 = ₹170.20, or ₹1.4183 per ml. At 50 ml with six reeds it is ₹82.60 + ₹48.00 = ₹130.60, or ₹2.612 per ml — a 1.84× penalty for the smaller vessel. Add the base and the gap narrows but does not close: the filled 50 ml build is ₹4.2605 per ml of liquid against ₹3.0668 at 120 ml, still 38.9% dearer, before you cost the fragrance.

Both listed sizes · glass, base and reeds at the published loads
Where the money sits at each size, and the inversion at 50 ml
Build Glass Base in the bottle Reeds Glass + base + reeds Per ml
50 ml at 25% · 6 black reeds ₹82.60 ₹82.43 (37.5 ml) ₹48.00 ₹213.03 ₹4.2605
50 ml at 20% · 6 black reeds ₹82.60 ₹87.92 (40 ml) ₹48.00 ₹218.52 ₹4.3704
120 ml at 25% · 8 black reeds ₹106.20 ₹197.82 (90 ml) ₹64.00 ₹368.02 ₹3.0668
120 ml at 20% · 8 black reeds ₹106.20 ₹211.01 (96 ml) ₹64.00 ₹381.21 ₹3.1768
120 ml at 30% · 8 black reeds ₹106.20 ₹184.63 (84 ml) ₹64.00 ₹354.83 ₹2.9569
The inversion At 50 ml and 25%, glass (₹82.60) exceeds the base inside it (₹82.43) by ₹0.17. At 120 ml and 25% the base is ₹91.62 more than the glass. Same shelf, opposite intuition
Worked out above: base at ₹2.198/ml is 1,099 ÷ 500, taken from the ₹1,099 500 ml packs — Pure Performance, Depth, Lift and Softness all sit at that price, so the figure is the same on four of the five bases; Longevity is ₹1,296 ÷ 500 = ₹2.592/ml, which adds ₹14.78 to a 37.5 ml fill and ₹35.46 to a 90 ml fill. Fills at the published ratios: 50 × 0.75 = 37.5 ml, 50 × 0.80 = 40 ml, 120 × 0.75 = 90 ml, 120 × 0.80 = 96 ml, 120 × 0.70 = 84 ml. Reeds at the flat ₹8.00 rate from the 50-pack up: six = ₹48.00, eight = ₹64.00. Per ml is the total ÷ the bottle's fill. Hardware-only per ml: 130.60 ÷ 50 = ₹2.612 against 170.20 ÷ 120 = ₹1.41833, a ratio of 1.8416. Filled per ml: 4.2605 ÷ 3.06683 = 1.3892, so 38.9% dearer. Oil is excluded throughout because it varies by listing. CSI live pricing, October 2026.

One more honest note on the base figures. No density is published for any base or oil in this range, so you cannot convert between millilitres and grams, and the Pure Performance 100 g pack at ₹325 therefore cannot be given a per-bottle price at all — a 90 ml fill has an unknown mass. Hit your load by weight on the bench instead: oil = base weight ÷ 4 at 20%, ÷ 3 at 25%, × 3 ÷ 7 at the 30% ceiling. That rule works whatever the vessel, which is exactly why it is the rule to use when the vessel is the thing you are changing.

What CSI does publish about heat and airflow

Four sentences in this whole range touch heat or air movement, and all four are qualitative. They are worth having in front of you before you spend on glass, because two of them point at levers that cost nothing. The reed pages state "avoid placing in direct sunlight or near heat sources which accelerate evaporation" and "place near a doorway or gentle air movement"; they also state that "the base will evaporate faster at higher reed counts"; and the Pure Performance page states that it "performs well in Indian climates by balancing scent throw with longevity", alongside its remark that "heat and humidity create specific challenges". That is the complete published commentary on the subject. There is no rate, no multiplier, no per-degree figure and no humidity number anywhere.

Read practically, those sentences order your spending for you. Placement is free, and the first page you should re-read is the one your customer gets rather than the one your supplier wrote — if finished stock is standing on a sunlit shelf in a godown, no bottle geometry will rescue it. Reed count is next, at ₹8.00 a reed and reversible within the hour. The base and the oil come third at ₹1,099 and up. New glass belongs last, because it is the only one of the four that also changes your fill, your cost per millilitre, your reed band, your carton and your label. Geometry is a legitimate lever; it is simply the most expensive one to pull, and it should be pulled with data rather than on a theory about surface area.

The four published heat-and-airflow statements · quoted as the pages' own words
What each one supports, and the lever it points at
Published wording Where The lever it points at What it costs you
"avoid placing in direct sunlight or near heat sources which accelerate evaporation" Fibre reed pages Placement — of finished stock as much as of the customer's bottle ₹0
"place near a doorway or gentle air movement" Fibre reed pages Placement again, in the other direction — for throw rather than against loss ₹0
"use 10+ for maximum throw in larger rooms — the base will evaporate faster at higher reed counts" Fibre reed pages Reed count, with its consequence stated outright ₹8.00 a reed, reversible
"performs well in Indian climates by balancing scent throw with longevity", with "heat and humidity create specific challenges" Pure Performance Base choice — the range's only direct climate commentary ₹1,099 a pack
Anything with a number attached Does not exist. No rate, no multiplier, no per-degree figure, no humidity number and no temperature anywhere in the range

Why a vessel change is a qualification

The bottle is not packaging. It is one of the variables in the formula, and changing it re-opens every line that depends on it.
— CandleMakingSuppliesIndia

Here is the part that costs people money. A maker decides to "move to a narrower bottle", orders glass, keeps the same recipe and the same eight reeds, and ships. Three things then go wrong at once, and because they went wrong together nobody can tell which one caused the customer complaint. The fill volume changed, so the cost per bottle and the price point changed. The reed immersion depth changed, so the length of wetted reed above the liquid changed — and that is the surface most of the fragrance leaves from. And the reed count is now sitting outside the band the pages publish.

That band is worth quoting exactly, because it is one of the few published numbers you have. The fibre reed pages state counts of 4–5 / 6–8 / 10+ and specifically 6–8 reeds for a 50–100 ml bottle. Note what that covers and what it does not: a 50 ml bottle is inside the band, and the 120 ml bottle sold in the same range is outside it. So a maker moving from 120 ml down to 50 ml moves into the published guidance, and a maker moving the other way moves out of it and should label the count as their own choice. The same pages also state that "the base will evaporate faster at higher reed counts", which is the published sentence that makes reed count the cheapest and most reversible lever in the whole problem — ₹8.00 a reed, changed in a minute, no new glass required.

The vessel qualification · every line a bottle change re-opens
What moves, what it affects, and the evidence that closes it again
Line in the spec What a vessel change does to it What closes it
Fill volume Changes outright — 37.5 ml of base at 50 ml against 90 ml at 120 ml, both at 25% A weighed fill procedure and a written fill line
Reed count 6–8 for a 50–100 ml bottle is published; a 120 ml bottle sits outside that band Count inside the band where it applies, label it as your choice where it does not
Reed immersion depth Changes with bottle height and fill line, so wetted reed length changes Measure it, and keep it identical across both arms of the trial
Exposed liquid surface The point of the exercise — and unpublished for both bottles Your caliper figure, minus the bundle area, recorded as yours
Cost per ml Rises 1.84× in hardware when you downsize to 50 ml with six reeds The cost table above, rebuilt with your own reed count
Price point and pack size A 50 ml product is a different SKU, not a cheaper version of a 120 ml one A commercial decision, taken deliberately rather than by default
Carton, insert and label New dimensions, new net content declaration, new artwork Physical samples, and a qualified adviser on labelling
Longevity you advertise Invalidated — the old figure was measured on the old vessel A fresh full-life weighed trial on the new vessel before any claim
Rest before bottling Unchanged — the published 24–48 hour rest is a blend step, not a vessel step Keep it identical in both arms
The mistake: changing the bottle and the reed count in the same move. It feels efficient — new vessel, new count, one disruption instead of two — and it makes the result unreadable, because the published guidance itself tells you reed count moves evaporation. If the new bottles consume less you will not know whether the neck did it or the two reeds you dropped did it, and you will have bought glass you may not have needed. Do it in the order that costs least: reed count first, since it is ₹8.00 a reed and reversible within the hour, and only reach for new glass if the count change leaves you short on either consumption or throw. If you must test both, test both — as separate arms in the same trial, not as one change.

The paired weighed trial, built properly

Six bottles answer this question: three per vessel, built in one session from one base pack, one oil pack and one reed pack. Three rather than one per side, because a single bottle gives you no idea how much your own filling and placement vary, and you need that spread before you can call a difference real. Everything below is arithmetic and procedure you own; nothing in it is a published CSI figure except where it says so.

1
Measure both vessels and the reeds before you mix anythingFive bottles of each size: neck inside diameter with the caliper's inside jaws, and rim-to-fill depth with the bottle filled to your working line. Five reeds: diameter across the middle. Write every individual reading, not an average. Compute opening area as π × (d ÷ 2)² and subtract the bundle area for the count you intend to use. Label the whole sheet "our measurements, October 2026" — none of these numbers is published by anybody.
2
Blend once, for all six bottlesOne batch, one base lot, one oil lot, one load. Hit the load by weight rather than volume — oil = base weight ÷ 3 at 25% — because no density is published for any base or oil in the range. Then rest the blend for the published 24–48 hours before bottling, exactly as the base pages state. A single blend across both arms removes the most common hidden variable in a vessel comparison.
3
Fill to a measured line, not to the shoulderDecide the fill as a volume you can repeat and write it down: 37.5 ml into each 50 ml bottle and 90 ml into each 120 ml bottle at 25%, which is 75% of nominal in both cases. Filling by eye to the shoulder of two different bottle shapes guarantees two different exposed surfaces and two different reed immersion depths, which is precisely the confusion you are trying to avoid.
4
Decide the reed count honestly, and keep it fixedIf you want the geometry effect on its own, use the same count in both vessels and accept that the count will sit inside the published 6–8 band for the 50 ml and outside any band for the 120 ml. If you want the realistic commercial comparison instead, use the count you would actually ship in each — but then you are comparing two products, not two necks, and you must say so in your own notes. Pick one of the two designs and do not mix them.
5
Weigh on day 0 and set your checkpointsReeds in, cap off, same ₹354 scale, same hour of day. Record all six weights and the room temperature you actually read on a thermometer. Then fix the checkpoints before you start — day 7, 14, 21 and 28 — and keep them even if the bottles look interesting on day 3. Fixed checkpoints, not end dates: two bottles that run dry on different days share only the earlier of the two, and comparing two endings throws most of your data away.
6
Record grams and intensity at every checkpoint, in the same minuteWeight to the gram, then a 0–5 intensity note from one person standing the same distance away in the same room, then the temperature and whether a fan or air conditioner was running. Grams lost ÷ days elapsed gives grams per day for each interval, which is what you compare. Flip the reeds on one schedule across all six — the pages state a flip every 3–5 days — or flip none of them. A flipped bottle against an unflipped one is not a comparison.
7
Read the result on two axes, then decideAverage the three bottles per vessel and look at the spread within each group first. If the within-group spread is as large as the between-group difference, you have no result yet and need more bottles or more time, not a decision. If the narrow vessel is genuinely slower and its intensity notes hold, qualify it — and then re-measure product life on the new vessel before you advertise anything. If it is slower and quieter, you have bought days at the cost of the product's only job.
The six-bottle vessel trial · what differs and what is held still
Three bottles per arm, one blend, one session
Element Arm A · 50 ML Arm B · 120 ML Why
Bottles Three, from one pack of ten Three, from one pack of ten Replicates show your own spread before you read a difference
Fill 37.5 ml each · 112.5 ml total 90 ml each · 270 ml total 75% of nominal in both, so the fill rule is identical
Base One 500 ml pack covers all six with 117.5 ml spare 382.5 ml needed against the 500 ml pack
Oil and load One oil lot, one load, hit by weight at base ÷ 3 Published 25% working ratio, inside the 10–30% window
Reeds 7 each · 21 total 7 each · 21 total Same count both sides isolates the vessel; 42 reeds fit one 50-pack
Rest before bottling Published 24–48 hours, one blend, one clock A published step, kept identical
Placement Same shelf, same height, away from direct sun and heat sources The reed pages' own placement guidance
What you read Grams at day 0, 7, 14, 21, 28 · intensity 0–5 · temperature read Two axes, every time

A note on the seven-reed count in that table, because it is deliberate and it is ours. Seven sits inside the published 6–8 band, which is stated for a 50–100 ml bottle, so Arm A is inside the guidance and Arm B is a 120 ml bottle for which no band is published. Using the same count on both sides is the choice that isolates the vessel. It is not the choice that mirrors what you would ship, and the trial sheet should say which of the two questions you decided to answer. Seven bottles' worth of reeds also keeps the arithmetic tidy: 42 reeds from a single ₹400 50-pack at the flat ₹8.00 rate, against ₹396.48 if you bought them in 25-packs at ₹9.44 — and the 50-pack leaves you eight spares for breakages.

The CSI principle
If the number is not on the page, it is on your bench. Measure the neck, weigh the bottle, and judge the swap on two readings.
No CSI page publishes a neck diameter, an opening area, a fill line, a reed diameter or an evaporation rate, so nothing here estimates one for you. What this page does instead is tell you which three dimensions to take with a caliper, which five figures to write down at each checkpoint, and which cost per millilitre to compare — and it tells you plainly that the 50 ml bottle costs more per millilitre than the 120 ml one, in case the plan was to save money by shrinking the glass.

What to buy for the trial, and at what price

Four things, all of which stay useful after the trial ends. The glass is the only item where the trial forces a specific purchase; the base, the reeds and the scale are production stock you would own anyway. Prices and stock below are live as of October 2026 and the linked pages are always the authority.

1
The only listed vessel · two sizes, no neck specification
Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML)
One listing, two variants, both packs of ten: 50 ML Pack of 10 at ₹826 — ₹82.60 a bottle — and 120 ML Pack of 10 at ₹1,062, ₹106.20 a bottle. Those two prices and those two capacities are the entire published specification. There is no neck diameter, no opening area, no fill line, no neck height and no wall thickness, so a narrow-neck comparison is built from your own caliper readings rather than from this page. Stock is 16 packs of the 50 ML and 24 of the 120 ML, which is 160 and 240 bottles — a stock position, not a limit on the listed packs, and the line most likely to bind on a large order. Two honest cautions. The body copy reads "Size: 50 and 100ml" against its own 50/120 ML variants, which we name and do not resolve; and CSI lists no 100 ml and no 200 ml reed bottle, so if your product is specified at either of those sizes the real options are to compute at 50 or 120 ml, or to under-fill the 120 ml and accept the cost per millilitre that follows. snehal Chaudhary's review reads "Nice product" — a satisfied purchase, and not a statement about geometry or evaporation.
Variant Pack price Per bottle Stock (packs / bottles)
50 ML Pack of 10 ₹826 ₹82.60 16 / 160
120 ML Pack of 10 ₹1,062 ₹106.20 24 / 240
Both packs, for the trial ₹1,888 — Twenty bottles, six used
₹82.60 and ₹106.20 a bottle · no neck dimension published for either Buy reed diffuser bottles
2
The liquid inside · and the rung that has no per-bottle price
Pure Performance Reed Base Oil
The base this page prices everything against, and the only one of the five sold in two different units. The 500 ML pack is ₹1,099, which is the ₹2.198 per ml used in every table above, and the 100 g pack is ₹325, which is ₹3.25 a gram. Those two figures cannot be reduced to one number, because no density is published for any base in the range — which also means the ₹325 pack cannot be given a per-bottle price at all, since a 37.5 ml or 90 ml fill has an unknown mass. For a vessel trial, buy the 500 ml pack and fill by volume; for load accuracy on the bench, weigh and use oil = base weight ÷ 3 at 25%. Its page publishes "Blend with 10-30% fragrance oil", a 25–30% working ratio, a 24–48 hour rest, and the only direct climate sentences in the range: "performs well in Indian climates by balancing scent throw with longevity" and that "heat and humidity create specific challenges". Those are qualitative statements, quotable as CSI's words, and not measurements. One published contradiction, named and left unresolved: its dose cards mark 20% as "Recommended" while its details table says 70–75% base with 25–30% oil, and its two FAQ copies disagree with each other. Stock is 63 of the 100 g and 56 of the 500 ML.
Size Price Per unit Stock
100 g ₹325 ₹3.25 per g 63
500 ML ₹1,099 ₹2.198 per ml 56
Both rungs together — Not comparable — no density published —
₹2.198 per ml at the 500 ML pack · the 100 g pack has no per-bottle price Buy Pure Performance base
3
The cheap reversible lever · and the missing third dimension
Fiber Diffuser Reeds (Black)
Before you buy glass, buy reeds — because reed count is the lever that moves evaporation for ₹8.00 and can be reversed in a minute, and the reed pages themselves state that "the base will evaporate faster at higher reed counts". Pricing is ₹236 for 25 (₹9.44 a reed), then flat ₹8.00 a reed at ₹400 / 50, ₹800 / 100 and ₹4,000 / 500. For the six-bottle trial, 42 reeds come out of one ₹400 pack. Published, and quotable as the page's words: 20.3 cm length, "uniform pore structure — no swelling, no clogging, no splitting", "does not swell in heat or humidity", counts of 4–5 / 6–8 / 10+ with 6–8 for a 50–100 ml bottle, a flip every 3–5 days, 1–2 hours initial absorption, and "avoid placing in direct sunlight or near heat sources which accelerate evaporation". What is not published is the dimension this post needs: no diameter, no pore size and no fibre count, on a page that uses the phrase "consistent diameter". So measure one with the caliper and record it as your figure. Stock is 73 / 93 / 95 / 100 packs; the Pack-of-500 count of exactly 100 looks like a placeholder, so no depth claim is built on it here. The white reed is the same reed in another colour at ₹1.00 a reed more from the 50-pack up.
Pack Price Per reed Stock
Pack of 25 ₹236 ₹9.44 73
Pack of 50 ₹400 ₹8.00 93
Pack of 100 ₹800 ₹8.00 95
Pack of 500 ₹4,000 ₹8.00 100
₹400 covers all 42 reeds the trial needs · ₹8.00 flat from 50 up Buy black fibre reeds
4
The instrument · without it there is no answer
Candle Making Weighing Scale
The whole question reduces to grams lost per day, so the scale is not an accessory here — it is the only piece of the trial that produces data. ₹354, 98 in stock. Use it twice: once to hit the load by weight, which is the only honest way to reach 25% when no density is published, and once per checkpoint to weigh each bottle with the reeds in and the cap off. Weigh at the same hour, on the same surface, with the same scale throughout; a different scale mid-trial introduces an offset you cannot recover. One thing a scale cannot do is measure the geometry, which is why this trial needs a vernier caliper as well — CSI does not list one, so source it locally, and if you only have a steel rule then record that your diameter figures are rule readings rather than caliper readings. Honesty about instrument precision costs nothing and protects every number downstream.
Item Price Used for Stock
Candle Making Weighing Scale ₹354 Load by weight, and every checkpoint weight 98
Vernier caliper Not listed at CSI Neck inside diameter, reed diameter Source locally
Thermometer Your own The room temperature beside every reading —
₹354 · the only item in the trial that produces a number Buy the weighing scale
Whole trial, bought once: ₹826 for ten 50 ML bottles, ₹1,062 for ten 120 ML, ₹400 for fifty black reeds, ₹1,099 for 500 ml of base and ₹354 for the scale — ₹3,741, of which only the glass is trial-specific. Fourteen spare bottles and eight spare reeds go straight into production.
Ask us to quote the trial
Why trust this guide

CANDLEMAKINGSUPPLIESINDIA sells raw materials, not finished diffusers. The easy version of this page would sell you a narrower bottle and a sentence about reduced surface area. Instead it tells you that no neck diameter, opening area, fill line or wall thickness is published for either listed bottle, that the reed diameter you also need is unpublished, and that the glass at 50 ml costs more than the base inside it. We would rather you bought ₹400 of reeds and tried the free lever first than ordered a pallet of glass on a theory.

Nothing here is a temperature or a rate. No CSI page publishes an evaporation rate, a volatility figure, a viscosity, a density, a flash point used as a working temperature, a storage temperature or a shelf life for any base, oil, reed or bottle. Every temperature on this page is the reader's own condition, every grams-per-day figure is the reader's own measurement, and the only geometry figures are the ones the reader takes with a caliper. The 21 mm and 12 mm diameters used to show the area arithmetic are illustrative values, not measurements of these bottles.

Published specifications quoted as published: the two bottle variants and their prices; the reed pages' 20.3 cm length, 4–5 / 6–8 / 10+ counts with 6–8 for a 50–100 ml bottle, the 3–5 day flip, the 1–2 hour initial absorption, the sunlight and heat-source placement line and the higher-reed-count evaporation line; and from the base pages the 10–30% blend window, the 25–30% working ratio and the 24–48 hour rest. The bottle page's "Size: 50 and 100ml" line and Pure Performance's 20%-recommended-against-25–30% contradiction are both named and left unresolved. Prices and stock are live CSI data from October 2026. For dimensions, documentation, bulk pricing or GST invoicing, message us on WhatsApp at +91 7397976926.

Frequently asked questions

Does a narrow-neck bottle really slow down reed diffuser evaporation?
The direction is reasonable and the size of the effect is yours to measure. Liquid leaves from the exposed surface and from the wetted reed above it, so a smaller opening exposes less of the first — that is ordinary physical behaviour and fair to state. What cannot be stated is a figure: CSI publishes no neck diameter, no opening area and no evaporation rate for any bottle, and nobody can tell you how many grams a day your bottle loses. Measure the neck with a caliper, build two arms with everything else identical, and weigh them with the reeds in and the cap off at fixed checkpoints. And read the throw at the same time, because a restricted opening can quieten the product as well as slow it.
What size reed diffuser bottles does CSI sell, and what are the dimensions?
Two variants, both packs of ten: 50 ML Pack of 10 at ₹826 (₹82.60 a bottle) and 120 ML Pack of 10 at ₹1,062 (₹106.20 a bottle), with 16 and 24 packs in stock — 160 and 240 bottles. Beyond capacity and price, no dimensions are published: no neck inside or outside diameter, no opening area, no neck height, no fill line and no wall thickness. There is also no 100 ml and no 200 ml reed bottle listed, and the page's own body copy says "Size: 50 and 100ml" against its 50/120 ML variants — we name that rather than resolve it. If an exact dimension decides your purchase, ask on WhatsApp before you order.
Is a 50 ml diffuser cheaper to make than a 120 ml one?
Per bottle, yes. Per millilitre of product, no — it is substantially dearer. Hardware at a full 120 ml with eight black reeds is ₹106.20 + ₹64.00 = ₹170.20, or ₹1.4183 per ml; at 50 ml with six reeds it is ₹82.60 + ₹48.00 = ₹130.60, or ₹2.612 per ml — a 1.84× penalty. Add the base at ₹2.198 a millilitre and the filled builds are ₹4.2605 per ml against ₹3.0668, still 38.9% dearer. The sharpest version of it: at 50 ml and the published 25% ratio, the glass (₹82.60) costs ₹0.17 more than the base inside it (₹82.43). Downsize for product reasons if you like, but not to save money.
How many reeds should I use if I change the bottle size?
The published guidance is 6–8 reeds for a 50–100 ml bottle, inside wider bands of 4–5 / 6–8 / 10+ with "10+ for maximum throw in larger rooms" and the stated consequence that "the base will evaporate faster at higher reed counts". Note the gap that matters here: the 120 ml bottle sold in this range sits outside the published band, so any count you use in it is your own labelled choice rather than guidance you are following. Moving from 120 ml to 50 ml therefore moves you into the published band. And because reeds are ₹8.00 each and reversible in a minute, count is the lever to test before you buy new glass at ₹82.60 or ₹106.20 a bottle.
Can I just run a hot bench test on two bottle shapes for a week?
You can, and it is worth doing — as a screen for change, not as evidence of life. A short run at a raised temperature of your own choosing will show you cloudiness, sediment, colour drift or an obvious difference in loss quickly. What it cannot do is tell you how either vessel performs over a real season: there is no conversion from an accelerated run to real-world time, and no multiplier turns a week on a warm shelf into two months in a customer's flat. If you run one, document the temperature and the duration as your own choices, keep a cool-stored twin from the same fill beside every warm arm, and treat the fast arms as an addition to the calendar trial rather than a substitute for it.
If the narrow bottle wins, can I advertise a longer product life?
Only after you have measured it on that vessel, more than once. Your old longevity figure was measured on the old bottle and does not transfer — a vessel change invalidates it. Run the new vessel to full life, on more than one unit, then publish a conservative figure or a range a customer could reproduce, and state what it assumes: room, season, airflow, reed count and load. Validate it per fragrance rather than advertising one range across a whole collection, because the oils behave differently in the same bottle and you have no published basis for assuming otherwise. And keep the throw note attached to the claim, so a longer life never quietly becomes a quieter product.
Measure, weigh, then buy the glass
₹0.17 — at 50 ml the bottle costs more than the base inside it. Price the vessel before you make it the fix.
Reed diffuser bottles ₹826 for ten 50 ML and ₹1,062 for ten 120 ML; black fibre reeds ₹236 / 25, ₹400 / 50, ₹800 / 100, ₹4,000 / 500; white ₹265 / ₹450 / ₹900 / ₹4,500; Pure Performance base ₹325 / 100 g and ₹1,099 / 500 ML; Depth, Lift and Softness ₹1,099; Longevity ₹1,296; weighing scale ₹354. Ask us for the dimensions we hold, for bulk pricing or for GST invoicing — and tell us what your caliper reads, because we would like to know too.
Shop diffuser bottles Ask about bottle dimensions
Editorial standards & sources
About this guide: Written by the CANDLEMAKINGSUPPLIESINDIA team. The caliper procedure, the paired weighed trial and the vessel-qualification checklist apply to any supplier's glass.

Customer reviews: The ten reviews above are genuine published Judge.me reviews from CSI product pages, unedited. None is evidence about bottle geometry or evaporation, and the jar reviews are for candle jars rather than diffuser bottles.

Figures verified October 2026: Reed diffuser bottles ₹826 / 50 ML pack of 10 and ₹1,062 / 120 ML pack of 10 at 16 and 24 packs; black fibre reeds ₹236 / ₹400 / ₹800 / ₹4,000 at 73 / 93 / 95 / 100 packs and white ₹265 / ₹450 / ₹900 / ₹4,500 at 87 / 97 / 97 / 100; Pure Performance ₹325 / 100 g (63) and ₹1,099 / 500 ML (56); Depth ₹1,099 (982), Lift ₹1,099 (66), Softness ₹1,099 (98), Longevity ₹1,296 (40); weighing scale ₹354 (98). Derived: ₹82.60 and ₹106.20 a bottle; base ₹2.198/ml and ₹2.592/ml on Longevity; fills 37.5 / 40 / 84 / 90 / 96 ml; base cost ₹82.43 / ₹87.92 / ₹184.63 / ₹197.82 / ₹211.01; the ₹0.17 glass-over-base gap at 50 ml and 25%; glass + base ₹165.03; hardware ₹130.60 and ₹170.20, per ml ₹2.612 against ₹1.4183 for a 1.8416× ratio; filled builds ₹213.03 and ₹368.02, per ml ₹4.2605 against ₹3.0668, 38.9% dearer; 42 reeds ₹400 from one 50-pack against ₹396.48 in 25-packs; trial total ₹3,741. Published and quoted as published: the two bottle variants; 20.3 cm reed length; counts 4–5 / 6–8 / 10+ with 6–8 for a 50–100 ml bottle; "the base will evaporate faster at higher reed counts"; a 3–5 day flip; 1–2 hours initial absorption; "avoid placing in direct sunlight or near heat sources which accelerate evaporation"; "uniform pore structure — no swelling, no clogging, no splitting"; "does not swell in heat or humidity"; "performs well in Indian climates by balancing scent throw with longevity"; the 10–30% blend window, 25–30% working ratio and 24–48 hour rest. No CSI page publishes a neck diameter, opening area, fill line, wall thickness, reed diameter, pore size, density, evaporation rate, volatility, viscosity or storage temperature, and none is stated, estimated or implied here. The 21 mm and 12 mm neck diameters are illustrative arithmetic, not measurements of these bottles. Every temperature and every grams-per-day figure is the reader's own. Prices and availability change — the linked product pages are always authoritative.
Back to blog