How Do I Find the Best Fragrance Oil Percentage for a Reed Diffuser by Comparing Throw, Wicking, Clarity, Stability, Evaporation and Raw-Material Cost?
Aktie
What are the rungs in grams? On a 105 g fill: 10% = 10.50 g oil, 20% = 21.00 g, 30% = 31.50 g (Formula 1). Never add oil to a fixed 105 g of base.
Which measurements are gates? Clarity (0 h, after the rest), stability (7 days, a cool night, 30 days for launch) and limits (30% page maximum, the oil's IFRA 10A figure less the weighing band).
What does the ladder cost? ₹5,161.44 for ten bottles with CSI materials; ₹1,186.44 for the oil alone if you own the rest. See the priced ladder.
The ladder, in grams
Every comparison in this section starts from the same arithmetic. Formula 1 (forward): oil = total × load; base = total − oil — load is the oil's share of the total blend by weight. On a 105 g fill in a 120 ml Gold bottle, the five rungs are below. Each rung is a test load, not a formula: a percentage you calculate is arithmetic, and only the gates turn it into something you may sell. CSI's base pages state a 10–30% range with 20% recommended on Pure Performance; this ladder spans that whole range so the gates and scores can find your point inside it.
| Rung | Oil | Base | Fill at 0.95 / 1.00 / 1.05 g/ml | Load band on a 1 g scale | If oil was added to 105 g of base instead |
|---|---|---|---|---|---|
| 10% | 10.50 g | 94.50 g | 110.5 ml / 105.0 ml / 100.0 ml | 9.52%–10.48% | 9.09% |
| 15% | 15.75 g | 89.25 g | 110.5 ml / 105.0 ml / 100.0 ml | 14.52%–15.48% | 13.04% |
| 20% | 21.00 g | 84.00 g | 110.5 ml / 105.0 ml / 100.0 ml | 19.52%–20.48% | 16.67% |
| 25% | 26.25 g | 78.75 g | 110.5 ml / 105.0 ml / 100.0 ml | 24.52%–25.48% | 20.00% |
| 30% | 31.50 g | 73.50 g | 110.5 ml / 105.0 ml / 100.0 ml | 29.52%–30.48% | 23.08% |
The last column is the most common wrong calculation, and it quietly ruins whole ladders: add 10.5 g to 31.5 g of oil to a fixed 105 g of base and the rungs become 9.09% to 23.08% — Formula 4 (actual load) — a ladder 13.99 points tall instead of 20. The band column is Formula 11 (scale resolution): on a scale that moves in 1 g steps, the 10% rung can truly be anywhere from 9.52% to 10.48%. Weigh to the finest step you have and record actual grams. The calculation capstone is the full guide to getting the grams right; the 100 ml at 20% hub covers densities. For the commercial view of the same decision, the most economical fragrance percentage and the fragrance-load pillar are the long versions.
The three gates: clarity, stability, limits
Run the gates first, because they are cheap to read and they remove rungs before you spend two weeks scoring them. Each is a pass or fail per rung; a single bottle failing fails that rung.
| Gate | Checkpoints | Pass means | If a rung fails | Read more |
|---|---|---|---|---|
| 1 · Clarity | 0 h and end of the 24–48 h rest the base pages ask for | Clear against a white card and a black card; one phase | Remove it; the rung above fails too in most cases | 8724 |
| 2 · Stability | 7 days; after a cool-room night (example: a closed AC room — record °C); 30 days for a launch | Still clear; no layer, droplets, sediment or colour change | Remove it; note the day it failed | 8726 · 8735 |
| 3a · Base page limit | Before mixing | Load ≤ 30% (stated on every CSI base page) | Not a candidate | — |
| 3b · IFRA Category 10A | Before mixing: the oil's certificate | Load + weighing band ≤ the certificate's 10A figure (for blends, each oil's share) | Not a candidate; never test above it for sale | 8736 · 8729 |
The limits gate has to be read before you mix, not after you score. CSI publishes no IFRA percentage for any oil; ask for the oil's certificate on WhatsApp and read the line for the category that covers reed diffusers — listed under Category 10A in current IFRA amendments, as commonly summarised in suppliers' guides; confirm against the category descriptions on the certificate itself. If the certificate's figure is below 30%, the ladder stops at the last rung under it, less your weighing band. In a blend, the figure applies to each oil's share of the finished product, not to the total load — the 22% post shows the arithmetic and a conservative check for blends.
Stability is the gate most makers shorten. Seven days and a cool night are the minimum for choosing a load; thirty days is the honest minimum before a launch claim. CSI publishes no shelf-life or stability data for any base or oil combination, and nothing on this page is one; the hold is your evidence. Diwali on 8 November leaves time for a 7-day hold and a cool night on a ladder mixed this week, but not for a 30-day hold — say so on any festive batch record.
The three scores: throw, wicking, evaporation
Score the survivors on three things, all measured, none estimated. Throw is a blind room score on a house scale you write before the first reading — 0 nothing · 1 only at arm's length · 2 within a metre · 3 on entering the room · 4 throughout the room · 5 too strong — taken from fresh air, one bottle in the room at a time, door closed, fan off, on fixed days. Wicking is the reeds: hours until the wet front reaches the reed tops (watch and note), reed weight dry and wet at day 7, and whether the reeds stay clean or turn sticky. Evaporation is the bottle: weigh it with its reeds at the same time every day; grams lost ÷ days = g/day, and fill ÷ g/day = days of life. CSI publishes no throw, wicking or evaporation figure for any base, oil or reed, so every one of these numbers is yours.
| Score | Measure | When | Unit | Read more |
|---|---|---|---|---|
| Throw | Blind first-impression score from fresh air | Days 2, 4, 7, 10 and 14 | 0–5 house scale | 8725 · 8731 |
| Throw (forced choice) | Which of two coded bottles is stronger? | Day 7, for the two closest rungs | Correct answers vs chance | 8722 · 8732 |
| Wicking | Hours until reed tops are wet; reed weight dry and at day 7 | Day 0–1; day 7 | Hours; grams held | 8723 · 8730 |
| Wicking (residue) | Reed colour and stickiness, photographed | Days 7 and 14 | Clean / tacky / sticky | 8728 |
| Evaporation | Bottle + reeds weighed daily | Every day, same time | g/day; days of life | 8727 · 8738 |
| Oil released | g/day × load (a simplification) | From the weighings | g of oil per day | 8738 |
The last row joins two scores together. If the liquid leaves the reeds roughly in the proportions it was mixed in — a simplification, because fragrance oils are mixtures and lighter components tend to go first — the oil reaching the room each day is g/day × load. That explains the two most common surprises on a ladder: a higher rung that smells no stronger because it loses fewer grams a day, and a higher rung that lasts longer because less is leaving. A 30% bottle releases more oil than a 20% bottle only if it loses at least 0.667 of the 20% bottle's grams per day. Weigh the bottles and you will see which rung is actually delivering.
Running the ladder
Ten bottles — two per rung — is one pack of 120 ml Gold bottles. Mix them on one day, from one pack of oil and one base, with 6 new white fibre reeds per bottle from one pack. Mango Coconut in Lift Base is this page's example: Lift's page lists mango among its fruity families, so the pairing is a reasonable starting point, not a promise. Use your own oil and base if you have them; the method does not change.
| Code | Rung | Base target g | Oil target g | Actual base g | Actual oil g | Actual load (Formula 4) | Initials |
|---|---|---|---|---|---|---|---|
| L10-1 / -2 | 10% | 94.50 g | 10.50 g | ||||
| L15-1 / -2 | 15% | 89.25 g | 15.75 g | ||||
| L20-1 / -2 | 20% | 84.00 g | 21.00 g | ||||
| L25-1 / -2 | 25% | 78.75 g | 26.25 g | ||||
| L30-1 / -2 | 30% | 73.50 g | 31.50 g | ||||
| Totals | 840.00 g | 210.00 g |
The scorecard
Fill this in from the ladder. The first three columns are gates (pass or fail); the next four are measurements; the last two are the decision. Leave it blank where a rung failed a gate: a failed rung has no score.
| Rung | Clarity | Stability (7 d + cool) | Limits | Throw (avg) | g/day | Days of life | Cost per day | Within 0.5 of best? |
|---|---|---|---|---|---|---|---|---|
| 10% | ✓ 30% page max | |||||||
| 15% | ✓ 30% page max | |||||||
| 20% | ✓ 30% page max | |||||||
| 25% | ✓ 30% page max | |||||||
| 30% | ✓ 30% page max |
If you have more than one candidate that survives and the knee rule does not separate them — two loads in different bases, say, or the same load in two oils — a weighted score helps you say out loud what matters to your product. Choose the weights before you see the results. Below is the arithmetic with invented scores for three generic candidates, P, Q and R — not results for Mango Coconut, Lift Base or any CSI product — to show how the weights change the answer.
| Candidate | Throw (weight 0.35) | Life (weight 0.20) | Wicking (weight 0.15) | Cost per day (weight 0.30) | Weighted score |
|---|---|---|---|---|---|
| P | 3.0 | 4.0 | 4.0 | 4.5 | 3.800 |
| Q | 3.8 | 3.5 | 4.0 | 3.5 | 3.680 |
| R | 4.0 | 2.5 | 3.0 | 2.5 | 3.100 |
With those weights, P wins at 3.800. Shift weight from cost to throw and R may overtake; shift it to life and P may. That is the point: the weights are a statement about your product — a budget gift line weighs cost per day, a luxury line weighs throw — and writing them down before testing stops you choosing the weights that justify a result you already liked. Gates are never part of the weighted score; a candidate that failed one is not on this table.
The priced ladder
The ladder needs 210 g of oil and 840 g of base with a 5% weighing allowance, ten bottles and 60 reeds. Every line is a listed in-stock size.
| Item | Need | Buy | Price | Left over |
|---|---|---|---|---|
| Lift Base 500 ml | 840 g + 5% = 882.0 g (882 ml at 1.00 g/ml) | 2 × 500 ml | ₹2,198.00 | about 160 ml at 1.00 g/ml |
| Mango Coconut | 210 g + 5% = 220.5 g | 2 × 100 g + 2 × 15 g | ₹1,186.44 | 20 g |
| Gold Reed Diffuser Bottle 120 ml | 10 bottles | 1 × pack of 10 | ₹1,062.00 | none |
| Fiber Diffuser Reeds (White) | 60 reeds | 1 × pack of 50 + 1 × pack of 25 | ₹715.00 | 15 reeds |
| CSI materials | ₹5,161.44 | |||
| Oil only (own base, bottles and reeds) | ₹1,186.44 |
Notes. The oil: Mango Coconut is one of the few oils with a real bulk step — ₹5.00 per g at 100 g against ₹3.96 at 500 g and 1 kg — but for a 220.5 g test, 2 × 100 g + 2 × 15 g at ₹1,186.44 is cheaper outright than a 500 g pack at ₹1,982.00. Buy the 500 g when you produce, not when you test. The base: 882.0 g needs 2 × 500 ml at 0.95 g per ml, 2 at 1.00 and 2 at 1.05 — Lift's density is not published. The reeds: a pack of 50 and a pack of 25 at ₹715.00 cost less than the pack of 100 at ₹900.00.
Cost per bottle, per day and per step
Cost is the last score, and it is only meaningful per day of use. At production rates — Mango Coconut at ₹3.96 per g (its 500 g and 1 kg rate) and Lift Base 500 ml at an example 1.00 g per ml, ₹2.20 per g — each rung's liquid costs:
| Rung | Oil | Base | Liquid | With 120 ml Gold bottle + 6 white reeds (₹9.00 each from 50) |
|---|---|---|---|---|
| 10% | ₹41.62 | ₹207.71 | ₹249.33 | ₹409.53 |
| 15% | ₹62.43 | ₹196.17 | ₹258.60 | ₹418.80 |
| 20% | ₹83.24 | ₹184.63 | ₹267.88 | ₹428.08 |
| 25% | ₹104.05 | ₹173.09 | ₹277.15 | ₹437.35 |
| 30% | ₹124.87 | ₹161.55 | ₹286.42 | ₹446.62 |
Each 5-point step adds ₹9.27 to a 105 g bottle: 5% of the fill × (oil ₹/g − base ₹/g). From 10% to 30% the liquid rises ₹37.09, against ₹160.20 of bottle and reeds that do not change. Then convert to cost per day, because rungs differ in how fast they empty: cost per day = liquid cost × g/day ÷ fill. The table is arithmetic for a range of g/day you might measure, not a prediction for any rung.
| Rung | at 1.0 g/day (105 days) | at 1.5 g/day (70 days) | at 2.0 g/day (52 days) | at 2.5 g/day (42 days) |
|---|---|---|---|---|
| 10% | ₹2.37 | ₹3.56 | ₹4.75 | ₹5.94 |
| 15% | ₹2.46 | ₹3.69 | ₹4.93 | ₹6.16 |
| 20% | ₹2.55 | ₹3.83 | ₹5.10 | ₹6.38 |
| 25% | ₹2.64 | ₹3.96 | ₹5.28 | ₹6.60 |
| 30% | ₹2.73 | ₹4.09 | ₹5.46 | ₹6.82 |
Read your own rungs into it. If the 25% rung loses 1.5 g a day and the 20% rung 2.0 g a day, the 25% can cost less per day despite costing more per bottle; if both lose 2.0 g a day, the 20% is cheaper per day by the full step. That is why the tie-break is cost per day, not cost per bottle — and why it only breaks ties: a cheaper rung that fails the knee rule is not the answer. Comparing 15%, 20% and 25% on cost and the 500-bottle cut from 25% to 20% carry the cost side to production scale.
The decision rule
Work down the table and stop at the first line that is true.
| If this is true | Do this | Buy |
|---|---|---|
| You do not have the oil's IFRA certificate | Get it; strike out rungs above its 10A figure less the band | Nothing yet |
| No rung passes gates 1 and 2 | Change the base or the oil — 8734 / 8737 | Nothing at production size |
| All surviving rungs score alike | Flat ladder: check the method — 8731; then take the lowest | Oil at the lowest survivor |
| Scores rise then flatten | Take the knee: lowest survivor within 0.5 of the best | Oil at the knee load |
| Two survivors tie on the knee rule | Take the lower cost per day | Oil at that load |
| The knee rung lasts too few days for your product | Next rung down if it scores within a point; else test the base — 8727 | Nothing until retested |
| Several scents in the range | Run the window screen — 8739 | Oil per approved load |
Whatever line you land on, write it down as a formula record: the load, the actual weighed grams, the oil and base pack dates, the certificate's amendment and 10A figure, the gate results with dates, the scorecard and the weights you chose. That page is what makes a load defensible when a customer, a retailer or you, six months from now, asks why it is 20% and not 25%.
Every question in this section, by measurement
Each post in this section measures one or two of the six things this capstone combines. Use the table to go deeper on the measurement that is giving you trouble.
| Measurement | Posts | What they settle |
|---|---|---|
| Throw | 8721 · 8722 · 8731 · 8732 · 8737 | Weak at 15%; more oil not stronger; flat ladders; whether customers notice a cut; more oil or another oil |
| Wicking | 8723 · 8730 · 8728 | Slow reeds at 30%; 18% beating 25%; sticky residue on reeds |
| Clarity | 8724 · 8735 | Highest stable concentration; a stable formula below the cloud point |
| Stability | 8726 · 8735 | Separation after two days; the cool-night hold |
| Evaporation | 8727 · 8738 | Strong but fast at 20%; lasts longer but weaker at 30% |
| Cost | 8732 · 8737 · 8739 | Cost of a 5-point cut; cost per day; one load or five |
| Limits | 8729 · 8736 | 30% and the safety documents; 22% against every limit |
| Test design | 8725 · 8733 · 8734 | A fair four-load test; why loads do not compare across oils; base versus load |
The section hub, 15% jasmine with weak throw — 20% or a new base?, lists the same posts by the situation you are in. The other sections of this series pick up where this one stops: the 100 ml at 20% hub for the calculations, scaling a 100 g formula to 1 kg once the load is chosen, 50 diffusers of 100 ml for bottle counts and purchase quantities, and 25 g added to 75 g by mistake for batches that need fixing. Their capstones — 100 g to 25 kg, the 1,000-bottle purchase list and the series finale — close each one.
The CSI products in this ladder
| Size | Price | Per unit | Stock (15 Oct 2026) |
|---|---|---|---|
| 500 ml | ₹1,099.00 | ₹2.20 per ml · ₹2.20 per g at an example 1.00 g/ml | In stock |
| CSI HyperDiffusion Base™ (different product) | ₹1,499.00 | — | Out of stock — not offered |
| Pack | Price | Per gram | 30% bottles at 31.5 g oil |
|---|---|---|---|
| 15 g | ₹93.22 | ₹6.21 | 0.5 |
| 50 g | ₹250.00 | ₹5.00 | 1.6 |
| 100 g | ₹500.00 | ₹5.00 | 3.2 |
| 500 g | ₹1,982.00 | ₹3.96 | 15.9 |
| 1 kg | ₹3,964.00 | ₹3.96 | 31.7 |
| Variant | Price | Per bottle | Stock (15 Oct 2026) |
|---|---|---|---|
| 50 ml · pack of 10 | ₹826.00 | ₹82.60 | In stock |
| 120 ml · pack of 10 | ₹1,062.00 | ₹106.20 | In stock |
| Pack | Price | Per reed | Bottles covered |
|---|---|---|---|
| Pack of 25 | ₹265.00 | ₹10.60 | 4 bottles at 6 reeds |
| Pack of 50 | ₹450.00 | ₹9.00 | 8 bottles at 6 reeds |
| Pack of 100 | ₹900.00 | ₹9.00 | 16 bottles at 6 reeds |
| Pack of 500 | ₹4,500.00 | ₹9.00 | 83 bottles at 6 reeds |
| Item | Price | Note |
|---|---|---|
| Weighing Scale | ₹354.00 | Resolution not published — check the display steps |
| Silicon Measuring Beaker 250 ml | ₹600.00 | For batches above about 100 g |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials, not finished diffusers. The easy answer is "use 25% for a strong diffuser" — which sells more oil. This page says the best load is usually the lowest one that scores near the top, prices every step so you can see how little the extra oil buys past the knee, and says plainly that we publish no throw, wicking, clarity, stability or evaporation data for any base, oil or reed.
Diffuser bases, fibre reeds, Gold bottles, beakers, scale and mixer are CSI live pricing, re-checked 15 October 2026. Fragrance oils are CSI live pricing, pulled 24 September 2026, stock re-checked 14 October 2026. Every gram split, ml-to-g conversion, per-bottle cost and kit total on this page is computed and shown to two decimals so you can check it; densities are labelled examples, never CSI specifications.
Bottle counts per arm, clarity checkpoints, weighing schedules, room-scoring scales and loss allowances are labelled working practices, not industry standards — none exists for reed diffuser performance. The 105 g fill, the 1.00 g/ml density, the 1 g scale step, the 6-reed count, the cool-room night, the 0.5-point knee threshold, the weights and scores in the P/Q/R example, the knee example scores and the g/day range in the cost-per-day table are labelled examples or invented numbers to show arithmetic, not results. For help building a test kit, bulk quotes, GST invoicing, MSDS or IFRA documents, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Made a Reed Diffuser with 15% Jasmine Fragrance Oil, but the Throw Is Weak — Should I Test 20% or Change the Base First?
- My Reed Diffuser Is Clear at 20% Fragrance Oil but Cloudy at 25% — How Do I Find the Highest Stable Concentration?
- I Want to Compare 10%, 15%, 20% and 25% Fragrance Oil in the Same Reed Diffuser Base — How Do I Design a Fair Performance Test?
- I Made Three Reed Diffusers at 15%, 20% and 25% Fragrance Oil, but They Smell Almost Identical — What Other Variables Should I Measure?
- I Want to Reduce Fragrance Oil from 25% to 20% to Save Cost — How Do I Check Whether Customers Will Notice a Difference in Throw?
- I Want to Make Reed Diffusers with a 22% Fragrance Load — How Do I Calculate the Formula and Confirm That the Finished Product Meets Applicable Safety Limits?
- My Oud Reed Diffuser at 30% Lasts Longer but Smells Weaker than at 20% — How Do I Investigate the Relationship Between Fragrance Load and Evaporation?
- I Am Making Five Different Reed Diffuser Fragrances — Should I Use the Same 20% Fragrance Load for All or Optimise Each Formula Separately?
- How Do I Calculate Reed Diffuser Fragrance Oil Percentages Correctly by Weight, Convert Them into Bottle Filling Volumes and Avoid Common Formula Calculation Mistakes?
- How Do I Scale a Tested Reed Diffuser Formula from a 100 g Laboratory Trial to 1 kg, 5 kg, 10 kg and 25 kg Commercial Batches While Maintaining Accuracy and Quality?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Eco Candle Wicks, Premium Candle Wicking Needle and Bamboo Wick Holder. They are general product reviews, not assessments of the guidance set out here. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on the three reviews Judge.me recorded as verified — Monika Deep, Subhankar Roy and Sneha Tamang; the reviews from Ashwini, LJ and Lalitha Jagan are published but not recorded as verified, and carry no badge.
Figures re-checked 15 October 2026 and pulled 24 September 2026: Diffuser bases, reeds, bottles and tools — CSI live pricing, re-checked 15 October 2026: Pure Performance Base ₹325.00 / 100 g, ₹1,099.00 / 500 ml; Longevity Base ₹1,296.00 / 500 ml; Lift Base ₹1,099.00 / 500 ml; Depth Base ₹1,099.00 / 500 ml; Softness Base ₹1,099.00 / 500 ml; CSI HyperDiffusion Base™ ₹1,499.00 (out of stock); Fiber Diffuser Reeds (Black) ₹236.00 / 25, ₹400.00 / 50, ₹800.00 / 100, ₹4,000.00 / 500; Fiber Diffuser Reeds (White) ₹265.00 / 25, ₹450.00 / 50, ₹900.00 / 100, ₹4,500.00 / 500 (both 20.3 cm long); Gold Reed Diffuser Bottle 50 ml ₹826.00 / pack of 10, 120 ml ₹1,062.00 / pack of 10; Weighing Scale ₹354.00; Silicon Measuring Beaker 100 ml ₹300.00, 250 ml ₹600.00; CSI Pro Mixer ₹349.00. Fragrance oils — CSI live pricing, pulled 24 September 2026, stock re-checked 14 October 2026: Mango Coconut Fragrance Oil ₹93.22 / 15 g, ₹250.00 / 50 g, ₹500.00 / 100 g, ₹1,982.00 / 500 g, ₹3,964.00 / 1 kg.
Non-price figures and assumptions: Fragrance load is a share of the total blend by weight (oil g = blend g × L; base g = blend g × (1 − L)). No density is published for any CSI base or oil: every ml-to-g conversion uses a labelled example density and shows ±5%; weigh 100 ml of your own blend to get yours. Example fill 105 g per 120 ml Gold bottle; example density 1.00 g/ml with ±5%; example 1 g scale step. The P/Q/R weighted-score example and the knee example scores are INVENTED to show the arithmetic and are not results for Mango Coconut, Lift Base or any CSI product. The g/day range in the cost-per-day table is arithmetic, not a measurement; oil released ≈ g/day × load is a simplification. Labelled working practices: two bottles per rung, 6 reeds weighed dry, 24–48 h rest, clarity at 0 h and end of rest, stability at 7 days, after a cool-room night and at 30 days, scoring on days 2, 4, 7, 10 and 14, a 0.5-point knee threshold, the 0–5 house scale. Production liquid costs use Mango Coconut's 500 g / 1 kg rate and Lift Base 500 ml at the example density. What CSI's base pages state (quoted as claims to test, not CSI test results): every base is a "Professional … Reed & Car Diffuser Base", crystal clear per its page, used at 10–30% fragrance of the total blend with a 24–48 hour rest before bottling. Pure Performance — neutral, "no added fixatives, no complex enhancements", for all families, "start at 10% … up to a maximum of 30%", "20% recommended", a "typical working blend 75% base + 25% fragrance", the example "for a 100 ml finished diffuser at 25%: 75 ml base + 25 ml fragrance oil", and "flip reeds after the first hour". Longevity — oriental/amber, woody, resinous/balsamic, spicy and gourmand; "avoid light florals, fresh citrus, aquatics — use Lift Base"; slower "cold diffusion"; "if clouding occurs, reduce fragrance percentage and retest"; "allow 2–3 hours before the first flip". Lift — floral, citrus, green and fruity. Depth — chypre, leather, smoky and rich gourmand; "stabilises tricky sweet and spicy fragrance oils". Softness — soft florals, powdery/musky, light gourmand. Reed page — 20.3 cm long; "for a standard 50–100 ml diffuser bottle, 6–8 reeds gives a good balance". Bottle page — variants 50 ml and 120 ml (its text says "50 and 100ml"); neck diameter, fill line and any reducer are not stated. CSI publishes no composition, density, viscosity, evaporation rate, flash point or shelf life for any diffuser base; no throw, evaporation or longevity result for any base, oil or reed; no reed diameter; no bottle neck size or fill line; no IFRA percentage for any oil; and no bulk base price. The five bases are told apart only by what their pages say they are for — never by a measured result. IFRA: reed diffusers are listed under Category 10A in current IFRA amendments as commonly summarised in suppliers' guides; read the Category 10A limit on the certificate for your oil, which CSI provides on WhatsApp request. Material costs exclude labour, packaging, freight and GST. Diwali 2026 falls on Sunday 8 November, 24 days after this page was written on 15 October 2026.