I Am Making Reed Diffusers for Humid Coastal Cities — How Do I Test the Effects of Temperature, Humidity and Ventilation Separately?
Aktie
I Am Making Reed Diffusers for Humid Coastal Cities — How Do I Test the Effects of Temperature, Humidity and Ventilation Separately?
So what can I actually separate? Temperature and ventilation, fairly cleanly, with two paired tests you can run this month. Humidity, much less cleanly, because in a real coastal flat you cannot change it on its own. The honest route for the third variable is matched-interval selection: keep a long weighed log, then compare only those intervals in which your recorded temperature and airflow state agreed and the humidity did not.
How many bottles? Seven. Two for the temperature test, two for the ventilation test, two for the humidity attempt, and one held cool and capped as the shared control. All seven from one blend, mixed once, rested the published 24 to 48 hours, with reeds counted out of one pack.
What does it cost? At 120 ml and a 20% load, ₹5,403.04 including the scale. Run the identical design at 50 ml and it is ₹3,242.04 — the same three answers for ₹2,161 less, because the liquid is the expensive part of a seven-bottle trial, not the glass.
Why the three arrive as one package
Think about what actually happens to a diffuser standing on a shelf in a Bandra flat in July. The room is warm. It is also humid, because July is the monsoon. The windows are open, because the room is warm — so there is air movement, which is why it does not feel as warm as it is. In October the room is still warm, drier, and the windows are shut because of the dust. In January it is cooler, drier, and the fan is off. At no point in the year does your flat offer you warm-and-dry-and-still, or cool-and-humid-and-breezy. The combinations that exist are the combinations the climate hands you, and they come bundled.
That is why an observation like "my diffusers empty faster in the monsoon" is a real observation and a useless explanation. It is consistent with temperature, with airflow, with humidity, with any pair of them, and with all three. And it is also consistent with four things that have nothing to do with the weather at all: a different oil lot, a different reed bundle, a customer who flips the reeds more often when the smell is pleasant, and a bottle that moved to a different shelf.
The second trap is subtler and it catches careful people. Every intervention you can make to change one variable changes at least one other. Turn the air-conditioner on and you have moved temperature, humidity and air movement in one action. Shut the window and you have changed airflow and, within an hour, temperature. Move the bottle into a bathroom for humidity and you have changed the ventilation, the temperature and the light. There is no single lever in a flat that moves only one of the three. So the design is not about finding such a lever — it is about choosing the pair of positions in which two of them differ least, and logging the two you were trying to hold so that you can prove afterwards whether you held them.
| Variable | What moves it in a real flat | What it drags along | Can you hold it still while moving another? |
|---|---|---|---|
| Temperature | Season, time of day, which wall the sun hits, kitchen use, AC | Humidity falls as AC runs; opening a window to cool a room adds airflow | Reasonably, by choosing two positions in the same room and the same hours |
| Humidity | Season, monsoon, proximity to a bathroom or kitchen, AC, rain | Almost always moves with temperature and with whether windows are open | Rarely. This is the honest limit of a workbench trial |
| Ventilation | Fan, open window, doorway traffic, AC blower, corridor draught | Changes effective temperature at the bottle; a fan dries the local air | Yes, best of the three — a fan can be switched with little else changing |
| Position in the room | Your own decision, and the customer's | Sunlight, draught, radiant heat from a wall, all at once | Yes, and it must be held fixed or nothing else is readable |
| Flip discipline | You, or your customer, on a 3 to 5 day schedule | Intensity and consumption together — the reed pages say so plainly | Yes, and it is free. Fix it before you fix anything else |
| Reed count | Your build | Consumption rises with count, per the reed pages' own wording | Yes. Count them out of one pack and never vary mid-trial |
Read the bottom three rows as the precondition for the top three. Position, flip schedule and reed count cost nothing to control and are the most common reason a weather trial comes out unreadable. If you have not fixed those, you are not yet testing the climate — you are testing your own inconsistency. The order of work is set out properly in the controlled-test sequence.
What CSI actually publishes about heat, humidity and airflow
Before you go looking for a specification to design against, here is the whole of it. Two pages in this range mention humidity at all, four times between them, and not one of those mentions carries a number. Two further statements concern airflow, and both are positioning instructions rather than performance figures. That is the complete published record, and it is worth quoting exactly because a good deal of what circulates in maker groups is attributed to suppliers who never said it.
| Published wording | Which page | What it establishes | What it is not |
|---|---|---|---|
| "formulated to perform in Indian conditions — where heat and humidity create specific challenges for diffuser products" | Pure Performance Base | That CSI considers heat and humidity relevant to diffuser products | A mechanism, a figure, or a claim that humidity dominates |
| "balanced throw and longevity in heat and humidity" | Pure Performance Base, comparison table | A qualitative positioning statement about that base | A measurement, and not comparable against another base numerically |
| "does not swell in heat or humidity" | Fibre reed pages, against bamboo | A claim about the reed material's physical stability | A statement about how fast anything wicks or evaporates |
| "in Indian heat and humidity, bamboo reeds also swell with moisture, which restricts the channels further" | Fibre reed pages | The only moisture mechanism published anywhere — and it is about bamboo, which CSI does not sell | Applicable to the fibre reeds you are actually using |
| "avoid placing in direct sunlight or near heat sources which accelerate evaporation" | Fibre reed pages | That heat accelerates evaporation — direction only | A rate, a multiplier, or anything per degree |
| "place near a doorway or gentle air movement for best diffusion" | Fibre reed pages | The only ventilation guidance in the range, and it is a recommendation | Evidence about how much airflow costs you in liquid |
Notice the fourth row particularly. The one published statement in the whole range that proposes a moisture mechanism is about bamboo reeds swelling — and no bamboo reed is listed here at all. So if you are using fibre reeds and someone tells you humidity is clogging them, the nearest thing to a supplier statement on the subject says the opposite about the material you are using. That is not proof either. It is a reason to run Test 3 rather than to accept the folklore.
The three one-variable tests
All three tests share one build. Mix a single batch at a load inside the published window — 20% is the figure Pure Performance's own dose cards mark as recommended — rest it the published 24 to 48 hours, and fill all seven bottles from the same jug on the same afternoon. Count every reed bundle out of one pack. Write the build sheet once and attach it to all three tests, because the moment the builds differ you have stopped comparing conditions and started comparing recipes.
| Test | What you move | What is held and logged | What a difference licenses | What it still does not license |
|---|---|---|---|---|
| 1 · Temperature | Two stable positions in one room, warmest against coolest | Same room, same hours, fan and AC state identical, humidity logged for both | "At my recorded temperatures, in my room, this blend loses X and Y grams a day" | Any per-degree figure, and any extension to a customer's flat |
| 2 · Ventilation | Still air against gentle moving air at the same spot | Same position, same temperature band, same humidity hours, fan on a timer | "Moving air costs me this much more liquid a day at this reed count" | A statement about throw. Measure intensity separately or you learn half of it |
| 3 · Humidity | Two rooms at genuinely different humidity | Temperature and airflow matched as closely as the flat allows, both logged | Usually nothing clean — which is the result. Then use matched intervals | Any claim that humidity alone determines performance. Nothing supports that |
| Control | Nothing. It is capped, cool and dark | Opened and read on the same days as the test bottles | "The blend itself has or has not changed underneath my trial" | A life figure. A sealed bottle is not a product in use |
| Discard rule | Applies to all three | Any interval in which a second logged condition moved materially | A shorter, honest dataset | Nothing. Discarded intervals are not evidence of anything |
Test 2 is the one most makers skip and the one that most often explains the mystery. Air movement is the condition with the largest free lever — a fan switch — and the fibre reed pages tell you the direction without giving you a size, both in their warning about heat sources and in their recommendation to place a diffuser near a doorway for best diffusion. A product that behaves beautifully in a closed showroom and empties in a customer's corridor flat has usually met Test 2 rather than the monsoon.
The humidity test, and the matched-interval fallback
Now the part that cannot be solved by buying more bottles. To isolate humidity you need two environments that differ in humidity and agree on temperature and airflow. In a coastal flat, the humid rooms are the unconditioned ones and the dry rooms are the air-conditioned ones, which means they also differ in temperature and in air movement. You can sometimes get closer — a bathroom-adjacent room in the hour after someone showers, against the same room two hours later, with the fan state fixed — but those windows are short and you will not get thirty days out of them.
So the honest design is a long log and a selection rule. Keep the weighed log running for a full season on a bottle whose position, reed count and flip schedule never change. Record temperature, humidity and airflow at every checkpoint. Then, at the end, go back through it and pull out only those intervals in which the recorded temperature sat in the same band and the airflow state was the same, and in which humidity differed. Compare those, and only those. You will end up with a handful of comparable pairs out of thirty intervals, and that is a real, if thin, dataset — far better than attributing the whole season to the variable you happened to name.
What your observation supports, and what it does not
The commercial reason to be strict about this is that each explanation leads to a different purchase, and three of the four common explanations lead to purchases that cannot possibly help. Before you spend ₹1,099 on a different base, work out which column of this table your evidence actually sits in.
| The conclusion | What the observation usually is | What it actually supports | Which test settles it, and what it costs |
|---|---|---|---|
| "The humidity is ruining it" | Monsoon bottles emptied faster than winter bottles | That something differs between the two seasons. Humidity is one of at least three candidates | Test 3, and usually the matched-interval fallback. Two bottles plus a season of logging |
| "I need a slower base" | Liquid consumption looks high in one window | Nothing yet about throw. A slower base can make this metric better and the product worse | Test 1 first, free; then a base pair. Depth costs the same ₹2.198/ml as Pure Performance, so that swap is ₹0 a bottle |
| "The reeds are clogging in the damp" | Intensity dropped after a few weeks | That intensity dropped. The only published moisture-swelling mechanism in the range is about bamboo, which is not listed here | Soak-and-weigh a fresh bundle against the used one, and the with-and-without-reeds screen. About ₹64 of reeds |
| "This oil cannot handle the coast" | The smell seems different by week three | That your perception differs. No odour-stability data is published for any oil, and this is a panel judgement rather than a measurement | A coded blind comparison against a cool-stored control, as in the screening protocol |
| "The customer is using it wrong" | One complaint, one city | Possibly a lot, and it is free to check. Flip frequency, position and sunlight are all in the published guidance | Ask three questions before you reformulate anything: where it stands, how often they flip, and whether a fan or AC runs near it |
The second row is the expensive one, and it is worth saying its arithmetic out loud. Reaching for a base that evaporates more slowly is reasonable — but a base that restricts wicking gives you a bottle that lasts longer and smells of less, and that reads as a success on a scale and as a failure in a customer's living room. Judge every base swap on two readings, consumption and perceived intensity, and never on days alone. The money is not the obstacle: Depth, Lift and Softness all sit at the same ₹1,099 as Pure Performance, so three of the four alternatives cost nothing extra per bottle. Only Longevity carries a premium — ₹0.394 a millilitre, which is ₹37.82 on a 120 ml bottle at 20% and ₹35.46 at 25%.
Buying the seven-bottle rig at two sizes
Here is the arithmetic for the whole design, at 120 ml and at 50 ml. The reason to look at both is that a three-test trial is dominated by liquid rather than by glass: seven bottles at 120 ml need 672 ml of base at a 20% load, which is two 500 ml packs, while seven at 50 ml need 280 ml, which is one. That single line is most of the difference between the two totals.
| Line item | Seven bottles at 120 ml | Seven bottles at 50 ml | Note |
|---|---|---|---|
| Bottles | 120 ML Pack of 10 — ₹1,062 | 50 ML Pack of 10 — ₹826 | Both listed only as packs of ten, so three spares either way |
| Reeds | 56 reeds (8 each) — 50-pack + 25-pack = ₹636 | 42 reeds (6 each) — 50-pack = ₹400 | At 120 ml, two 50-packs would be ₹800: check the route, not the rung |
| Scale | ₹354 | ₹354 | Reused for every trial after this one |
| Base at 20% | 672 ml — two 500 ML packs = ₹2,198 | 280 ml — one 500 ML pack = ₹1,099 | The 500 ml pack is the largest listed; 672 ml cannot come from one |
| Oil at 20% | 168 g — 100 + 50 + 15 + 15 gm = ₹1,153.04 | 70 g — 50 + 15 + 15 gm = ₹563.04 | Priced on Lemongrass and Lime; no rung equals exactly 168 g or 70 g |
| Total | ₹5,403.04 | ₹3,242.04 | The same three answers, ₹2,161.00 apart |
One honest caveat on the small build. The 50 ml trial is cheaper in total and the published reed recommendation of 6 to 8 reeds is written for a 50 to 100 ml bottle, so a six-reed 50 ml bottle sits squarely inside CSI's own guidance while a 120 ml bottle sits just outside it. But hardware per millilitre is 1.84 times higher at 50 ml, so if the trial is a rehearsal for a product you intend to sell at 120 ml, run it at 120 ml. Test the thing you ship. The cost comparison between fill sizes is worked through in the 100 ml raw-material guide.
| Size | Price | Per ml |
|---|---|---|
| 500 ml | ₹1,099 | ₹2.198 |
| At a 20% load, per 120 ml bottle | ₹211.01 | 96 ml |
| At a 25% load, per 120 ml bottle | ₹197.82 | 90 ml |
| At a 20% load, per 50 ml bottle | ₹87.92 | 40 ml |
| Size | Price | Per unit |
|---|---|---|
| 100 g (sold by mass) | ₹325 | ₹3.25 per g |
| 500 ML (sold by volume) | ₹1,099 | ₹2.198 per ml |
| Seven 120 ml bottles at 20% | ₹2,198 | 672 ml — two packs |
| Seven 50 ml bottles at 20% | ₹1,099 | 280 ml — one pack |
| Size | Price | Per gram |
|---|---|---|
| 15 gm | ₹116.52 | ₹7.768 |
| 50 gm | ₹330 | ₹6.60 |
| 100 gm (2 packs) | ₹590 | ₹5.90 |
| 500 gm (5 packs) | ₹2,600 | ₹5.20 |
| 1,000 gm (1 pack) | ₹5,200 | ₹5.20 |
| Variant | Price | Per bottle |
|---|---|---|
| 50 ML Pack of 10 | ₹826 | ₹82.60 |
| 120 ML Pack of 10 | ₹1,062 | ₹106.20 |
| Hardware per ml, 50 ml with 6 reeds | ₹130.60 | ₹2.612 |
| Hardware per ml, 120 ml with 8 reeds | ₹170.20 | ₹1.4183 |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials, not finished diffusers. This page contains no humidity figure, no humidity mechanism and no claim that humidity determines how a diffuser performs, because none of those exists in a form anyone could honestly attach to a product. It would be easier to sell you a base by naming a villain. What we can give you is the exact published wording on heat, humidity and airflow in this range, the arithmetic at live prices, and a test design in which one variable moves at a time.
Every price and stock figure here comes from live CSI data in October 2026 and links to the product page, where current pricing always takes precedence. Stated specifications are quoted only where a page publishes them: the 10 to 30% blend window, the 25 to 30% working ratio and the 24 to 48 hour rest on the base pages; the 20.3 cm length, the 6 to 8 reed recommendation for a 50 to 100 ml bottle, the 3 to 5 day flip interval and the sunlight, heat-source and doorway guidance on the fibre reed pages. No relative humidity figure, evaporation rate, viscosity, wicking rate, storage temperature or shelf life is published anywhere in the range.
For help reading a four-column log, for bulk pricing, GST invoicing, MSDS or documentation requests, message us on WhatsApp at +91 7397976926. Documentation is provided on request and is never summarised second-hand, and compliance or labelling questions belong with a qualified adviser in your market.
Frequently asked questions
- Customers report shorter product life in summer — what controlled tests should I perform?
- Choosing oils and bases that perform consistently in hot weather
- Comparing oil performance at 30C, 35C and 40C
- Separating the fragrance's contribution from the base's — the plain-base blank
- Screening fragrance samples for heat-related change
- Which raw materials to test first for a 100 ml summer diffuser
- Comparing volatility, viscosity, solubility and room throw across the five bases
Customer reviews: The ten reviews at the top are genuine, published Judge.me reviews left by CSI customers. Names, ratings, dates and products are as recorded; wording is unedited. Most describe candle making, and none is evidence about a temperature, a humidity level or an airflow condition.
Figures verified October 2026: Prices and stock are live. Pure Performance 100 g ₹325 (63 packs) and 500 ML ₹1,099 (56); Depth ₹1,099 (982); Lift ₹1,099 (66); Softness ₹1,099 (98); Longevity ₹1,296 (40). ₹1,099 ÷ 500 = ₹2.198/ml and ₹1,296 ÷ 500 = ₹2.592/ml, a ₹0.394/ml premium: ₹42.55 / ₹37.82 / ₹35.46 / ₹33.10 per 120 ml bottle at 10 / 20 / 25 / 30%. Lemongrass and Lime ₹116.52 / ₹330 / ₹590 / ₹2,600 / ₹5,200 (₹7.768 / ₹6.60 / ₹5.90 / ₹5.20 / ₹5.20 per g; kilo saves ₹0; stock 90 / 25 / 2 / 5 / 1). Gold Reed Diffuser Bottle 50 ML Pack of 10 ₹826 and 120 ML Pack of 10 ₹1,062, at 16 and 24 packs. Fiber Diffuser Reeds Black ₹236 / ₹400 / ₹800 / ₹4,000. Scale ₹354; pen thermometer ₹354. Arithmetic: 7 × 96 ml = 672 ml and 7 × 24 g = 168 g at 20%; 7 × 40 ml = 280 ml and 7 × 10 g = 70 g; 1,062 + 636 + 354 + 2,198 + 1,153.04 = ₹5,403.04; 826 + 400 + 354 + 1,099 + 563.04 = ₹3,242.04; difference ₹2,161.00; (106.20 + 64.00) ÷ 120 = ₹1.4183 and (82.60 + 48.00) ÷ 50 = ₹2.612, a 1.84× ratio. No humidity figure, humidity mechanism, evaporation rate, wicking rate, viscosity, temperature coefficient, storage temperature or shelf life is published for any item in this range, and none is stated, estimated or implied here. No claim is made that humidity alone determines performance. Every temperature, humidity reading and day-count in this question is the reader's own. Prices and availability change — the linked product pages are always authoritative.