I Successfully Made a 100 g Reed Diffuser Trial Batch — How Do I Scale the Formula to 5 kg Without Changing Fragrance Strength or Clarity?
Aktie
Can I go straight to 5 kg? You can, but a 1 kg bridge (200 g + 800 g) checks your vessel, stirring and new lots for a fifth of the oil.
How do I know strength did not change? Remake 100 g from the trial recipe as a control and run it beside bottles from the top, middle and end of the fill — weighed g/day and a blind room score.
What does it cost? About ₹28,441.00 in CSI materials for bridge plus 5 kg and 56 bottles; ₹449.04 per finished diffuser. See the cart.
Your trial, in numbers, before anything else
Start with what is on your bench. You weighed 20.00 g of fragrance oil and 80.00 g of a ready-made reed diffuser base, stirred it, rested it, filled a 120 ml bottle with 100 g and put 7 fibre reeds in it. It stayed clear, it scored well in your room, and the bottle lost weight at a rate you were happy with. That is a successful trial. The ratio — 20.00% of the total blend — is the part that scales perfectly: 5 kg is 50 times 100 g, so every ingredient is 50 times bigger, 1,000.00 g of oil and 4,000.00 g of base. If your question were only arithmetic, this sentence would be the whole page.
It is not the whole page because "without changing fragrance strength or clarity" is a promise about the product, not the recipe. Between 100 g in a beaker and 5 kg in a bucket, several things change that the recipe never mentions: the vessel, the way the oil is stirred through the base, how long the liquid takes to become uniform, the base and oil lots you are now drawing from, the temperature of the room on mixing day, the number of times the liquid is poured, and how many bottles are filled from one mix. Each of these can, in general practice, move clarity or strength a little. None of them is a reason to change the ratio. All of them are reasons to scale in steps and to keep a sample of everything.
So do three things today, with what is already on your bench, before buying anything. First, find the retained sample of the trial blend — if you kept one — and look at it against a white card and a black card. If it is still clear and single-phase, the formula has passed the longest clarity hold you own. If you did not keep one, the trial bottle itself is your reference; note its date. Second, reread your weighing record. Did you write down both weights, and what steps does your scale move in? A trial weighed on a scale that reads in whole grams is only known to within a fraction of a gram either side on each liquid, which matters later. Third, weigh the trial bottle with its reeds today and write the number beside the date: that is a free data point on grams lost per day, and it is the yardstick the 5 kg must match.
| Batch | Scale factor | Fragrance oil | Base | Base in 500 ml bottles (at 0.95 / 1.00 / 1.05 g/ml) | Bottles it fills at 100 g |
|---|---|---|---|---|---|
| Trial (done) | × 1 | 20.00 g | 80.00 g | — | 1 |
| Bridge | × 10 | 200.00 g | 800.00 g | 2 / 2 / 2 | 8 after a 100 g retained sample and 2% loss |
| Production | × 50 | 1,000.00 g | 4,000.00 g | 9 / 8 / 8 | 48 after a 100 g retained sample and 2% loss |
| Bridge + production | 1,200.00 g | 4,800.00 g | 11 / 10 / 10 | 56 |
Read the base column carefully. CSI sells its diffuser bases by volume — 500 ml bottles — and no density is published for any base. At an example 1.00 g per ml, 4,000 g of base is 4,000 ml, exactly eight bottles. If the base is 5% lighter, the same grams take 4,211 ml and you need nine; if it is 5% heavier, 3,810 ml and eight is plenty. You find out which by weighing one full 500 ml bottle of base on day one, not by guessing. The full general method for converting a trial to a production batch is in converting a 100 g trial into a 10 kg batch; this page is about what to check when you do it with a formula you already trust. If you are building a business around it, the business pillar carries the same formula through costing and wholesale buying.
What changes at 5 kg, and what each change can do
The table below lists what is different about a 5 kg batch compared with your 100 g trial, what each difference can do in general practice, and the single check that tells you whether it did. None of these are CSI measurements — CSI publishes no clarity, mixing or diffusion data for any base or oil — they are the commonly described ways a scaled batch drifts from its trial, written so you can test each one.
| What differs at 5 kg | What it can do | The check that clears it | Owned by |
|---|---|---|---|
| Weighing precision | A whole-gram scale left your trial between 19.50% and 20.50%; the 5 kg on the same scale is 19.990%–20.010% | Accept that the trial's true load had a band; the bridge confirms it | 8289 |
| Mixing vessel and stirring | Oil can sit as a layer or streak in a deep vessel if stirring does not reach the bottom | Top, middle and bottom samples look and smell the same | 8285 |
| Mixing time | Two minutes in a beaker is not two minutes in a bucket | Stir until no streaks, then sample; record the time | 8288 |
| Base and oil lots | A new 500 ml bottle or a new 1 kg oil pack is a new lot; lots can differ slightly | Retained trial sample beside a fresh 100 g remade from new lots | 8293 |
| Room temperature on mixing day | A cold bench or AC room can show haze a warm trial never did | Record room °C; clarity hold at room temperature | 8247 |
| Water or residue in the vessel | Commonly the cause of sudden haze in a vessel that was washed and not dried | Dry the vessel completely; blank-rinse with a little base | 8287 |
| Filling 48 bottles from one mix | Drips, overfills and uneven reed counts make bottles differ even when the liquid is identical | Fill by weight; count reeds into each bottle | 8285 |
Notice that the first row is about the trial, not the production batch. If your trial was weighed on a scale that reads in 1 g steps, each reading could be up to half a gram out. On 20 g and 80 g, that means the trial's true load could have been anywhere from 19.50% to 20.50%. On 1,000 g and 4,000 g, the same scale is accurate to a few thousandths of a percentage point. In other words, the 5 kg batch is more exactly 20% than your trial was — and if the trial happened to land at 20.50% and smelled wonderful, the production batch at exactly 20% might smell very slightly softer. That is not a scaling failure. It is the trial's precision showing. What scale accuracy you need for 100 g trials and 10 kg batches works this through for every common scale step.
Mixing is where most scale-ups go wrong, and it is the hardest thing to see. In a 250 ml beaker, a spoon reaches every part of the liquid in a few turns. In a 5 to 6 litre vessel, a spoon or the small paddle of a handheld mixer moves the top half well and the bottom corners poorly. Fragrance oils and bases are different liquids; until they are uniformly mixed, the first bottles you fill can carry more of one than the last. Your nose will not tell you which bottles are which until they are in a customer's room. The sampling step in the method below — three small samples from the top, middle and bottom of the vessel after stirring — is the cheapest insurance you can buy.
The scale-up method: bridge first, then 5 kg
The bridge is ten times the trial and one fifth of the production batch. It is big enough to need a bigger vessel and real stirring, and small enough that if it hazes or smells different you have lost 200 g of oil, not a kilogram. It also gives you 8 sellable or giftable bottles if it passes. Equipment: a scale that can weigh the full batch plus the vessel (check your scale's capacity — CSI does not publish the capacity of its Weighing Scale), a clean, completely dry mixing vessel with a lid that holds well over the batch volume (a food-grade stainless or HDPE container is a common choice; it is not a CSI product), a long clean stirring paddle or the CSI Pro Mixer, three small clear glass vials or jars for samples, labels and a pen.
Two parts of that sequence are commonly skipped and are the ones that protect the promise in your question. The three-level sample is how you know the 5 kg is uniform before 48 bottles carry it out of the door. The remade 100 g control is how you know "strength unchanged" is true: you are comparing the scaled product not with your memory of the trial, but with the trial recipe made fresh from the same lots, in the same room, on the same days. Why a clear 500 g trial can turn cloudy at 10 kg is the page to read if gate 2 or gate 3 fails.
Proving strength is unchanged: the side-by-side round
"The same strength" needs a measurement, or it is a feeling. CSI publishes no throw, evaporation or longevity data for any base, oil or reed, so the measurement is yours. The round is small: one control bottle remade at 100 g from the trial recipe, and three bottles filled from the production batch — one from early in the fill, one from the middle and one from the end. Every bottle gets the same 100 g fill, the same 7 white fibre reeds from one pack, and the same spot in the same room in turn.
| Bottle | Liquid from | Fill | Reeds | What it tells you |
|---|---|---|---|---|
| C — control | 100 g remade from the trial recipe, new lots | 100 g | 7 | What the formula does today in this room |
| P1 | 5 kg batch, first 16 bottles filled | 100 g | 7 | Was the top of the vessel richer or weaker? |
| P2 | 5 kg batch, middle of the fill | 100 g | 7 | The typical production bottle |
| P3 | 5 kg batch, last bottles filled | 100 g | 7 | Was the bottom of the vessel different? |
Weigh every bottle with its reeds after the first flip (day 0) and then on days 1, 3, 7 and 14, at the same time of day, on the same scale. Grams lost per day is the weight difference divided by the days between weighings. Score the room blind on a house scale you write down before the first reading — for example 0 nothing, 1 at arm's length, 2 within a metre, 3 on entering, 4 throughout, 5 too strong — one bottle in the room at a time, the scorer coming in from fresh air. Photograph the reeds against a white card on days 7 and 14 and note the room's minimum and maximum temperature. The production batch passes if P1, P2 and P3 sit within your own stated tolerance of C on both score and grams per day. The tolerance is yours to set before the test — for example "within one point and within 0.3 g per day" — and it is a house standard, not an industry one; none exists.
| If a bottle loses | Days to empty | Weeks |
|---|---|---|
| 1.5 g per day | 66.7 | 9.5 |
| 2.0 g per day | 50.0 | 7.1 |
| 2.5 g per day | 40.0 | 5.7 |
| 3.5 g per day | 28.6 | 4.1 |
If P1 scores higher and loses faster than P3, the vessel was not uniform when you filled: the top carried more oil. Re-stir the remaining liquid, resample and fill the rest; the bottles already filled from the top are a separate lot. If all three production bottles match each other but sit below the control, look first at the trial's weighing band in the table above, then at the oil lot (the control and the production batch should be from the same new lot — if they are, the oil lot is cleared). If all four match, you have scaled the formula. When 20 hand-made bottles vary in strength covers bottle-to-bottle variation in depth, and setting a product-life claim from several bottles shows how to turn these weighings into a claim you can print.
The priced cart for bridge plus production
Priced with listed, in-stock CSI sizes on the example formula. The cart covers the 1,200 g of oil and 4,800 g of base for both batches, 56 bottles and 392 reeds. The base line is sized for the light end of the density band — 11 bottles of 500 ml — because running short halfway through a 5 kg weighing is worse than a bottle left over; if your weighed density turns out to be 1.00 g/ml or above, the last bottle starts your next batch.
| Item | Need | Buy | Price | Left over |
|---|---|---|---|---|
| Lift Base | 4,800 g (about 4,800 ml at 1.00 g/ml) | 11 × 500 ml | ₹12,089.00 | about 700 ml at 1.00 g/ml |
| Lemongrass and Lime | 1,200 g | 1 × 1 kg + 2 × 100 g | ₹6,380.00 | 0 g |
| Gold Reed Diffuser Bottle 120 ml | 56 bottles | 6 × pack of 10 | ₹6,372.00 | 4 bottles |
| Fiber Diffuser Reeds (White) | 392 reeds (7 per bottle) | 4 × pack of 100 | ₹3,600.00 | 8 reeds |
| CSI materials | ₹28,441.00 | |||
| Mixing vessel, lids, sample vials, labels | once | your own or local | not a CSI product — example only | — |
Three honest notes on that cart. The oil is 1 × 1 kg + 2 × 100 g because that is the cheapest listed combination that covers 1,200 g; on CSI's listed catalogue most oils cost about the same per gram from 100 g upwards, and buying bigger mostly buys convenience and stock security. Lemongrass and Lime is one of the exceptions — its 1 kg is ₹5.20 per gram against ₹5.90 at 100 g — but that is a property of this oil, not a rule. Second, CSI lists bases only as 500 ml bottles (and Pure Performance also in 100 g); a 5 kg or 25 kg base quantity is quoted on WhatsApp, with no published volume discount. Third, the white reeds are ₹9.00 each from the 50-pack and the black ₹8.00; the colour changes the look, not the method.
What one production bottle costs
At the rates in that cart — Lemongrass and Lime at the 1 kg rate, Lift Base 500 ml at an example 1.00 g/ml, a ₹106.20 120 ml Gold bottle and 7 white reeds at ₹9.00 — one 100 g diffuser costs:
| Line | Quantity | Cost | Note |
|---|---|---|---|
| Fragrance oil | 20 g | ₹104.00 | Lemongrass and Lime 1 kg rate ₹5.20/g |
| Base | 80 g | ₹175.84 | ₹167.47–₹185.09 if the density is ±5% from 1.00 g/ml |
| Liquid | 100 g | ₹279.84 | Trial-size rates (100 g oil): ₹293.84 |
| Gold bottle 120 ml | 1 | ₹106.20 | Pack of 10 |
| White fibre reeds | 7 | ₹63.00 | ₹9.00 each from the 50-pack |
| CSI materials per diffuser | ₹449.04 |
The liquid falls from ₹293.84 at trial-size rates to ₹279.84 at the 1 kg oil rate — but notice that most of that saving comes from this particular oil's price step, not from scaling as such. With an oil priced linearly from 100 g to 1 kg, the liquid cost per bottle hardly moves when you scale. The real saving from scaling is time: one weighing and one stir instead of fifty. The exact cost of a 120 ml bottle at 22% builds a fuller cost ledger, and how much base to buy for 100 diffusers after losses and density goes deeper on the loss allowance.
The decision rule
Apply it at each gate, from the top, and stop at the first line that is true.
| If this is true | It means | Do this |
|---|---|---|
| The retained trial sample has hazed or dropped sediment | The formula is not finished | Buy nothing yet. Run a 7-day hold — 8252 |
| The trial was mixed by volume | Its true load is unknown | Remake 100 g by weight; treat it as the trial |
| Bridge top / bottom samples differ | Stirring does not reach the bottom | Re-stir, resample; longer stirring or a taller paddle before the 5 kg |
| Bridge hazes at 48 h but the trial never did | Vessel, water, room or lot | Buy nothing yet. Work through 8288 before scaling |
| Bridge matches the remade control on clarity, score and g/day | The process scales | Buy for the 5 kg: 11 × 500 ml Lift + oil + bottles + reeds (₹28,441.00 with the bridge) |
| 5 kg P1–P3 match C within your tolerance | Batch released | Fill, label, record lots; reorder after the 7-day hold |
| P1 beats P3 on score and g/day | Vessel was not uniform | Re-stir the rest; treat early bottles as a separate lot |
The rule never says "raise the load" because the production batch smells a touch softer than you remember, and it never says "change base" because one bridge batch hazed. A scale-up that fails a gate is a process problem until a remade control proves otherwise. When the process is right, the next questions are about quantities and money — whether to buy 1 kg, 5 kg or 25 kg of base and whether 25 kg is cheaper than 5 kg at a time — and finally about writing it down, which the production SOP covers.
The CSI products in this scale-up
| Size | Price | Per unit | Stock (15 Oct 2026) |
|---|---|---|---|
| 500 ml | ₹1,099.00 | ₹2.20 per ml · ₹2.20 per g at an example 1.00 g/ml | In stock |
| CSI HyperDiffusion Base™ (different product) | ₹1,499.00 | — | Out of stock — not offered |
| Pack | Price | Per gram | Bottles at 20.0 g oil |
|---|---|---|---|
| 15 g | ₹116.52 | ₹7.77 | 0.8 |
| 50 g | ₹330.00 | ₹6.60 | 2.5 |
| 100 g | ₹590.00 | ₹5.90 | 5.0 |
| 500 g | ₹2,600.00 | ₹5.20 | 25.0 |
| 1 kg | ₹5,200.00 | ₹5.20 | 50.0 |
| Variant | Price | Per bottle | Stock (15 Oct 2026) |
|---|---|---|---|
| 50 ml · pack of 10 | ₹826.00 | ₹82.60 | In stock |
| 120 ml · pack of 10 | ₹1,062.00 | ₹106.20 | In stock |
| Pack | Price | Per reed | Bottles covered |
|---|---|---|---|
| Pack of 25 | ₹265.00 | ₹10.60 | 3 bottles at 7 reeds |
| Pack of 50 | ₹450.00 | ₹9.00 | 7 bottles at 7 reeds |
| Pack of 100 | ₹900.00 | ₹9.00 | 14 bottles at 7 reeds |
| Pack of 500 | ₹4,500.00 | ₹9.00 | 71 bottles at 7 reeds |
| Item | Price | Note |
|---|---|---|
| Weighing Scale | ₹354.00 | Resolution not published — check the display steps |
| CSI Pro Mixer (cordless handheld) | ₹349.00 | Optional; a clean glass rod or spoon also works |
| Silicon Measuring Beaker 250 ml | ₹600.00 | For batches above about 100 g |
| Silicon Measuring Beaker 100 ml | ₹300.00 | Mixing vessel; weigh, do not measure by its marks |
Find your exact scaling-up question
This page is the hub for the fifth section of the series — "I'm scaling up my reed diffuser making". Every post in it starts from a real batch and uses the same tools: grams, not millilitres; a retained sample of everything; a remade control beside the new thing; weighed grams per day and a blind house score. Each owns one question.
| What you are doing or asking | What the post settles | Post |
|---|---|---|
| 50 bottles of 120 ml, labelled by volume | Turning a ml label into a gram fill | 8282 |
| 100 diffusers at 20% — how much base to buy? | The loss and density allowance | 8283 |
| Lavender finalised — 1 kg, 5 kg or 25 kg of base? | Order size for a first run | 8284 |
| 20 hand-made bottles vary in strength | Mixing and filling consistency | 8285 |
| 500 diffusers for Diwali gifting | Quantities and a backwards schedule | 8286 |
| Five fragrances, one base | Production order without cross-contamination | 8287 |
| 500 g trial clear, 10 kg batch cloudy | What changed between the two | 8288 |
| What scale accuracy do I need? | Resolution for 100 g and 10 kg | 8289 |
| Exact cost of a 120 ml bottle at 22% | The raw-material cost ledger | 8290 |
| Base ₹450/kg, oil ₹1,800/kg — liquid cost at 20%? | Your prices, run through the formula | 8291 |
| 1,000 a month: 25 kg or 5 kg at a time? | Bulk versus cash and risk | 8292 |
| Changing base supplier | Testing without risking existing products | 8293 |
| Jasmine works; adding oud and coffee | Same base and load, or not | 8294 |
| 100 ml formula into a 200 ml wide-neck bottle | What must be retested | 8295 |
| 500 bottles for corporate gifting | Leakage, stability and reed checks before dispatch | 8296 |
| Shipping across India | Heat and courier testing | 8297 |
| Three formulas before a 25 kg purchase | The QC tests that come first | 8298 |
| 1,000 diffusers — the SOP | Weighing, mixing, resting, filling, tracking | 8299 |
| Homemade formula to commercial product | The full method for this section | 8300 |
Four more sections cover what comes before scaling. Making your first batch owns the starting formula and ratio. Weak smell and poor throw owns diffusion problems. Cloudiness, separation and colour change owns clarity. Liquid disappearing too fast or too slowly owns consumption and product life. If your trial has not yet passed all four, fix it there before you scale it here.
CANDLEMAKINGSUPPLIESINDIA supplies raw materials, not finished diffusers. The easy answer is "just multiply by fifty and buy 10 kg". This page multiplies by fifty, then argues for a 1 kg bridge that sells you less, says your trial was probably less exact than your production batch will be, sizes the base for a density we cannot publish, and says plainly that we publish no clarity, throw, evaporation or longevity data for any base, oil or reed.
Diffuser bases, fibre reeds, Gold bottles, beakers, scale and mixer are CSI live pricing, re-checked 15 October 2026. Fragrance oils are CSI live pricing, pulled 24 September 2026, stock re-checked 14 October 2026. Every gram split, ml-to-g conversion, per-bottle cost and kit total on this page is computed and shown to two decimals so you can check it; densities are labelled examples, never CSI specifications.
Bottle counts per arm, clarity checkpoints, weighing schedules, room-scoring scales and loss allowances are labelled working practices, not industry standards — none exists for reed diffuser performance. The 1.00 g/ml density, the 1 g scale step, the 2% transfer loss, the 100 g retained samples, the 100 g fill, the 7-reed count and the house scale are labelled examples you replace with your own. For help building a test kit, bulk quotes, GST invoicing, MSDS or IFRA documents, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Want to Make 50 Reed Diffusers of 120 ml Each — How Do I Calculate Base and Fragrance Quantities by Weight When My Bottles Are Labelled by Volume?
- I Am Making 100 Reed Diffusers with 20% Fragrance Oil — How Much Base Should I Buy After Accounting for Filling Losses and Density?
- I Have Finalised My Lavender Reed Diffuser Formula — Should I Buy 1 kg, 5 kg or 25 kg of Base for My First Commercial Production Run?
- I Made 20 Reed Diffusers by Hand, but the Fragrance Strength Varies Between Bottles — How Do I Improve Mixing and Filling Consistency?
- My 500 g Trial Formula Was Clear, but the 10 kg Batch Became Cloudy — Could Mixing Conditions or Raw-Material Differences Explain the Problem?
- I Want to Make Reed Diffusers Using a Digital Weighing Scale — What Accuracy Do I Need for 100 g Trials Compared with 10 kg Batches?
- I Made a Reed Diffuser Formula with 22% Fragrance Oil — How Do I Calculate the Exact Raw-Material Cost of a 120 ml Bottle?
- I Am Ready to Manufacture 1,000 Reed Diffusers — How Do I Create a Production SOP for Weighing, Mixing, Resting, Filling, Sealing and Batch Tracking?
- I Want to Turn My Successful Homemade Reed Diffuser Formula into a Commercial Product — How Do I Finalise the Base, Fragrance Percentage, Fibre Reeds, Stability Testing, Costing and Wholesale Raw-Material Purchase?
- I Am Making My First 100 ml Reed Diffuser with Fragrance Oil — Should I Start with DPG or a Ready-Made Reed Diffuser Base, and What Ratio Should I Test?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Eco Candle Wicks, Premium Candle Wicking Needle and Bamboo Wick Holder. They are general product reviews, not assessments of the guidance set out here. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on the three reviews Judge.me recorded as verified — Monika Deep, Subhankar Roy and Sneha Tamang; the reviews from Ashwini, LJ and Lalitha Jagan are published but not recorded as verified, and carry no badge.
Figures re-checked 15 October 2026 and pulled 24 September 2026: Diffuser bases, reeds, bottles and tools — CSI live pricing, re-checked 15 October 2026: Pure Performance Base ₹325.00 / 100 g, ₹1,099.00 / 500 ml; Longevity Base ₹1,296.00 / 500 ml; Lift Base ₹1,099.00 / 500 ml; Depth Base ₹1,099.00 / 500 ml; Softness Base ₹1,099.00 / 500 ml; CSI HyperDiffusion Base™ ₹1,499.00 (out of stock); Fiber Diffuser Reeds (Black) ₹236.00 / 25, ₹400.00 / 50, ₹800.00 / 100, ₹4,000.00 / 500; Fiber Diffuser Reeds (White) ₹265.00 / 25, ₹450.00 / 50, ₹900.00 / 100, ₹4,500.00 / 500 (both 20.3 cm long); Gold Reed Diffuser Bottle 50 ml ₹826.00 / pack of 10, 120 ml ₹1,062.00 / pack of 10; Weighing Scale ₹354.00; Silicon Measuring Beaker 100 ml ₹300.00, 250 ml ₹600.00; CSI Pro Mixer ₹349.00. Fragrance oils — CSI live pricing, pulled 24 September 2026, stock re-checked 14 October 2026: Lemongrass and Lime Fragrance Oil ₹116.52 / 15 g, ₹330.00 / 50 g, ₹590.00 / 100 g, ₹2,600.00 / 500 g, ₹5,200.00 / 1 kg.
Non-price figures and assumptions: Fragrance load is a share of the total blend by weight (oil g = blend g × L; base g = blend g × (1 − L)). No density is published for any CSI base or oil: every ml-to-g conversion uses a labelled example density and shows ±5%; weigh 100 ml of your own blend to get yours. Trial 100 g at 20% (20 g + 80 g); bridge 1,000 g; production 5,000 g. Example density 1.00 g/ml with ±5% (0.95–1.05 g/ml) for 500 ml bottle counts. Example 1 g scale step giving a trial band of 19.50%–20.50%. Labelled working practices: 100 g retained sample per batch, 2% transfer and filling loss, 100 g fill per 120 ml bottle, 7 reeds, three-level sampling, 48-hour and 7-day holds, weighing on days 0, 1, 3, 7 and 14. Per-bottle cost uses the 1 kg oil rate and the 500 ml base at the example density; trial-size liquid uses the 100 g oil rate. What CSI's base pages state (quoted as claims to test, not CSI test results): every base is a "Professional … Reed & Car Diffuser Base", crystal clear per its page, used at 10–30% fragrance of the total blend with a 24–48 hour rest before bottling. Pure Performance — neutral, "no added fixatives, no complex enhancements", for all families, "start at 10% … up to a maximum of 30%", "20% recommended", a "typical working blend 75% base + 25% fragrance", the example "for a 100 ml finished diffuser at 25%: 75 ml base + 25 ml fragrance oil", and "flip reeds after the first hour". Longevity — oriental/amber, woody, resinous/balsamic, spicy and gourmand; "avoid light florals, fresh citrus, aquatics — use Lift Base"; slower "cold diffusion"; "if clouding occurs, reduce fragrance percentage and retest"; "allow 2–3 hours before the first flip". Lift — floral, citrus, green and fruity. Depth — chypre, leather, smoky and rich gourmand; "stabilises tricky sweet and spicy fragrance oils". Softness — soft florals, powdery/musky, light gourmand. Reed page — 20.3 cm long; "for a standard 50–100 ml diffuser bottle, 6–8 reeds gives a good balance". Bottle page — variants 50 ml and 120 ml (its text says "50 and 100ml"); neck diameter, fill line and any reducer are not stated. CSI publishes no composition, density, viscosity, evaporation rate, flash point or shelf life for any diffuser base; no throw, evaporation or longevity result for any base, oil or reed; no reed diameter; no bottle neck size or fill line; no IFRA percentage for any oil; and no bulk base price. The five bases are told apart only by what their pages say they are for — never by a measured result. IFRA: reed diffusers are listed under Category 10A in current IFRA amendments as commonly summarised in suppliers' guides; read the Category 10A limit on the certificate for your oil, which CSI provides on WhatsApp request. Material costs exclude labour, packaging, freight and GST. Diwali 2026 falls on Sunday 8 November, 24 days after this page was written on 15 October 2026.