My Soy Candle Is Stable at 24°C but Develops Oil Droplets at 35°C — Should I Consider the Formula Commercially Unstable for India?
Aktie
Does CSI rate its soy wax to 35°C? No. CSI publishes no heat-resistance or survival temperature for any wax. 35°C is your test condition, and the result belongs to your formula, not to the wax alone.
What should I change first? Fragrance load. Step down in whole-percent steps from your current figure and repeat the 35°C hold with the same jar, wick and process.
Is 8% already low enough? Not necessarily. At 8% total, 16 g oil sits in 184 g wax, which is 8.70% of wax weight. Some oils still migrate at that load under heat.
What your two temperatures are actually telling you
Think of it as a margin rather than a verdict. Every wax and oil pair has some load it holds comfortably, some load it holds only while cool, and some load it cannot hold at all. Your current formula sits in the middle band: comfortable at 24°C, uncomfortable at 35°C. The task is to move it into the first band for the conditions your candles will meet.
At 24°C your soy wax is firm enough to hold the fragrance oil where it set. At 35°C the same wax is softer, and any oil held only loosely inside it can move outward. The droplets are not a defect that appeared out of nowhere; they are the formula's real margin showing itself. A formula with plenty of margin stays dry at your 35°C. A formula sitting near its limit does not.
Both figures are yours. CSI does not publish a temperature at which CSI 464, Chunks or any of its soy waxes stops holding oil, and no one can honestly hand you one. What you have is better than a rating: a direct observation on your own jar, wick, oil and load.
Is it 'commercially unstable for India'?
India is not one condition. A candle sold through a cool, controlled shop and carried home by the buyer may never meet 35°C. A candle posted in May through a long courier chain probably will, or will meet something you cannot measure at all. The honest answer is route-specific: the formula is unstable for every route where 35°C or more is likely, and possibly acceptable for routes where you control the temperature from shelf to buyer.
Most makers selling online cannot promise that control. If your sales include parcels, treat the 35°C droplets as a fail for the product as it stands. Do not sell it with a 'store in a cool place' note as a substitute for fixing it; a care label cannot hold oil in wax.
Write the acceptance test before you rerun it
Decide what 'pass' means before you see results, so you cannot talk yourself into a borderline candle. The sheet below is a suggested starting format; the durations and counts are your own choices to adjust.
| Item | Gate 1: baseline | Gate 2: acceptance |
|---|---|---|
| Condition | Your 24°C room, steady | Your 35°C, controlled warm room or cabinet |
| Hold | Suggested 7 days on the shelf | Suggested 8-hour hold, then room overnight, three times |
| Candles per load | Suggested 3 | Suggested 3, plus 1 kept at 24°C as a control |
| Check | Tissue blot top and glass edge each day | Tissue blot after every cool-down |
| Pass rule | No transferable oil, no wet ring | No transferable oil after the final cycle |
| Fail rule | Any greasy mark or bead | Any greasy mark, bead or oil line at the glass |
| Record | Photo, date, load, wax batch | Photo per cycle, cabinet reading, load, wax batch |
Why a control candle at 24°C during gate 2? Because it separates heat from time. If the control also starts to bead during the same week, the formula is failing on its own and the warm cabinet simply sped it up. If only the warmed candles bead, heat is the trigger and the margin is what you are measuring.
Use a separate thermometer to confirm the condition rather than trusting a dial. If your warm room drifts from 35°C to something hotter, write the actual reading down; a test you cannot repeat cannot approve anything.
Step the load down and find the margin
Here is a worked example using your own 8% as the starting point. A 200 g candle at 8% total is 184 g wax and 16 g oil, or 16 ÷ 184 × 100 = 8.70% of wax weight. That is well inside the Chunks page's 13% wax-weight maximum and inside CSI 464's 'up to 10%', yet your candle still beads at 35°C. A stated maximum is the wax maker's ceiling for typical oils at ordinary conditions. It is not a promise for every oil at every temperature.
The ladder in the chart is the next move: pour the same candle at 7% (186 g wax, 14 g oil) and 6% (188 g wax, 12 g oil). With Bergamot Amber at ₹5,437.00 per kg, the oil per candle falls from 16 × ₹5.437 = ₹86.99 at 8% to 14 × ₹5.437 = ₹76.12 at 7% and 12 × ₹5.437 = ₹65.24 at 6%. A lower load that passes is cheaper as well as safer; the only question is whether the hot throw stays where you want it.
If no sensible load passes
Where the current formula can and cannot go
Until a new formula passes, sort your sales routes into two groups. Routes you control end to end, such as a pop-up stall, a cool retail shelf or a hand delivery in your own car, may tolerate a formula that passes at 24°C but not at 35°C, provided you check the stock before every sale. Routes you do not control, such as couriers, marketplaces and wholesale buyers who store stock in their own rooms, should receive only formulas that pass gate 2.
Be careful with wholesale. A shop that buys forty candles may keep them in a back room that reaches far more than your 35°C, and any oil that appears there becomes your complaint. Tell trade buyers how the candles should be stored, but do not rely on that note: supply them only with formulas that have passed.
Keep the two groups visible in your records so a busy week does not quietly send failing stock out through a parcel. A simple column in your order sheet marking 'gate 2 passed: yes or no' is enough.
Whatever you decide, candles already poured at the failing load stay out of parcels. A formula is commercially stable for India when it clears the gate you wrote for the routes you actually sell through, not when it survives the coolest month.
Where this page fits
CSI already has guides that cover parts of this question. This page answers one sweating decision; these cover the neighbouring questions:
Three things to buy for this fix
| Option | Price | Status on the October 2026 pull |
|---|---|---|
| 500 g | ₹299.00 | In stock |
| 1 kg | ₹599.00 | In stock |
| 5 kg | ₹2,995.00 | In stock |
| 10 kg | ₹5,999.00 | In stock |
| Option | Price | Status on the October 2026 pull |
|---|---|---|
| 15 g | ₹105.02 | In stock |
| 50 g | ₹280.00 | In stock |
| 100 g | ₹560.00 | In stock |
| 500 g | ₹2,718.00 | In stock |
| 1 kg | ₹5,437.00 | In stock |
| Option | Price | Status on the October 2026 pull |
|---|---|---|
| Pen thermometer | ₹354.00 | In stock |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials and production equipment, not finished candles. This guide separates general formulation practice from what CSI's own product pages state, converts the pages' wax-weight loads to the total-weight basis used here, says plainly where CSI publishes no figure (wax heat resistance, survival temperatures, oil composition beyond the page), and labels every load step, test temperature, observation day or reject rate as a starting point for your own validation.
Prices are live CSI prices from October 2026; product pages are authoritative. Where a spec is not published — such as the temperature at which a wax starts to release oil — this guide says so rather than filling the gap.
For bulk quotes, GST invoicing, IFRA and MSDS documents, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- My Candle Starts Sweating Inside a Delivery Truck During Summer — How Can I Formulate for Indian Courier Conditions?
- My Candles Arrive Oily at the Customer Even Though They Looked Perfect When Dispatched — How Do I Reproduce Shipping Heat During Development?
- Should I Heat-Test Finished Candles Before Launching Them Across India?
- What Temperature Range Should I Use When Comparing Candle Formulas Intended for Indian Summer Shipping?
- My Candle Sweats at 40°C but Returns to Normal After Cooling — Does That Mean the Formula Is Acceptable or Still Unstable?
- If Fragrance Oil Migrates During Heat Exposure and Is Reabsorbed After Cooling, Can the Candle’s Burn Performance Still Change?
- My Soy Candle Becomes Very Soft During Courier Transit and Fragrance Appears on the Surface — Should I Test a Higher-Melting Wax?
- Can Blending a Softer Soy Wax With a Harder Candle Wax Improve Summer Stability Without Destroying Hot Throw?
- My Soy Candles Sweat When My Room Reaches 34°C in May — Do I Need a Different Wax for Indian Summer?
- My Candle Starts Sweating Fragrance Oil Only During Hot Weather — Does That Mean My Fragrance Load Is Too High for Indian Summer Conditions?
Customer reviews: The reviews at the top are genuine, published Judge.me reviews — Shanu Shah (5★, verified); Deepika k. (5★, verified); Monika Deep (4★, verified); Ashwini (5★, not recorded as verified); Sraddha (5★, verified); Urvashi Patel (4★, verified). Names, ratings, dates and products as recorded by Judge.me.
Product facts (October 2026, CSI live store): Luxury Soy Wax Chunks: 500 g ₹299.00, 1 kg ₹599.00, 5 kg ₹2,995.00, 10 kg ₹5,999.00 — container and jar wax · stated maximum fragrance load 13% of wax weight · product page states prices are inclusive of taxes. Bergamot Amber Fragrance Oil: 15 g ₹105.02, 50 g ₹280.00, 100 g ₹560.00, 500 g ₹2,718.00, 1 kg ₹5,437.00 — top bergamot and citrus, heart amber with soft floral, base woody musk and vanilla · soy 6–10%, paraffin 6–8% · page intensity guide: 6% bergamot leads, 8% balanced, 10% amber comes forward and vanilla/musk base becomes more prominent. Pen Thermometer: Pen thermometer ₹354.00 — range and accuracy not published.
Assumptions: Fragrance load is a percentage of total candle weight (200 g = 184 g wax + 16 g oil at 8%); CSI wax pages phrase their ceilings as a share of wax weight. CSI wax pages state fragrance loads as a share of wax weight; converted here to total weight with W ÷ (100 + W) (10% of wax = 9.09% of the candle; 13% = 11.50%). A stated maximum is the wax maker's ceiling for typical oils, not a promise for every oil. CSI publishes no wax heat-resistance or survival temperature; every test temperature, observation day, load step, reject rate and labour or energy cost is a suggested starting point or the reader's own figure. Blends with microcrystalline wax, Vybar, paraffin or Soy Pillar Wax are the maker's own to test. Wax prices re-checked 7 October 2026, oil prices 1 October 2026; product pages are authoritative.