How to Make Reed Diffusers in India
How to Make Reed Diffusers in India
What ratio of oil to base should I start with? Many makers start at 20% oil by weight, inside the 10–30% range CSI's diffuser bases publish. Treat it as a test point, not a rule.
How long should the blend rest? Rest it capped for 24–48 hours before adding reeds, then check that it is still clear with nothing settled or layered.
What does one 120 ml bottle cost in materials? About ₹459.34 with Pure Performance base, jasmine oil at 20%, a gold 120 ml bottle and six black reeds, excluding labour, packaging, freight and GST.
- The four parts, and what each listing does and does not tell you
- Your first 100 g batch, weighed step by step
- Resting the blend for 24–48 hours
- A two-week test plan that tells you something
- What one 120 ml bottle costs in materials
- From trial cart to first production run
- Your first reed diffuser trial: what to put in the cart
- The straight answer
- FAQ
The four parts, and what each listing does and does not tell you
Every reed diffuser you make in India from CSI supplies uses the same four components. What matters before you buy is not only what each one does but what its product page leaves unpublished, because those gaps are exactly what your own testing has to fill.
| Part | CSI listing | Job in the bottle | Not published |
|---|---|---|---|
| Fragrance oil | Any oil, e.g. Jasmine Fragrance Oil | The scent itself | Reed-diffuser throw or longevity (oil pages give candle loads only) |
| Diffuser base | Pure Performance Reed & Car Diffuser Base and four others | Carries the oil up the reeds; page range 10–30% oil | Composition, density, flash point, shelf life |
| Reeds | Fibre Diffuser Reeds (Black) or White, 20.3 cm | Wick the liquid and release it from the exposed length | Diameter |
| Bottle | Gold Reed Diffuser Bottle, 50 ml or 120 ml, packs of 10 | Holds the liquid; neck width affects how much surface is open | Neck diameter |
CSI sells fibre reeds only, no rattan, and it does not sell DPG, Augeo-type solvents or a reed diffuser kit. You assemble your own trial from the separate listings, which is what the rest of this guide does.
Your first 100 g batch, weighed step by step
Work by weight, not by volume. For illustration we treat 1 ml of finished liquid as about 1 g; weigh a measured 100 ml of your own blend once and correct the figures if it differs. The batch below uses 20% oil, which is a common starting point inside the published 10–30% range, not a CSI recommendation.
Resting the blend for 24–48 hours
Leave the capped bottles somewhere shaded at normal room temperature for 24 to 48 hours before adding reeds. Resting is not a published CSI requirement; it is a practical check. It gives a slow-mixing oil time to show whether it stays in solution.
After resting, hold each bottle against light. You want clear liquid with no haze, no droplets settling at the bottom and no layer at the top. If you see any of those, do not add reeds yet. Make a second batch at a lower load, for example 15%, and rest it the same way. A cloudy result is a compatibility signal between that oil and that base at that load, not a fault you can stir away.
A two-week test plan that tells you something
Smelling a diffuser while you stand next to it tells you very little. Noses stop noticing a constant smell after some time in the same room, so the person who made it is the worst judge. Use a simple, repeatable plan instead.
- Weigh the bottle with reeds in it on day 0 and at the same time every day. Write down grams lost per day.
- Use one reed count per bottle, for example 5 in one and 8 in the other. Reed numbers are your test variable, not a CSI figure.
- Ask someone who has been outside the room to walk in and describe what they notice, morning and evening.
- Note fan, air conditioner and window conditions, because airflow changes both evaporation and how scent spreads.
- Flip reeds only on set days and record it, so a stronger reading is not mistaken for a formula change.
No CSI oil or base page publishes reed-diffuser throw, longevity or room-size data, so this log becomes your own specification. The fibre reed page claims uniform pores and no clogging; your daily weights are how you check that claim in your own bottles.
What one 120 ml bottle costs in materials
Once a formula passes, the next question is cost. The figures below assume a 120 g fill at 20%, the 500 ml base pack, the 500 g jasmine pack, a 10-bottle pack and six black reeds from the 50 pack. Weigh your real fill, which is usually a little under the brim, and re-run the numbers.
| Line | Quantity | Pack used | Cost |
|---|---|---|---|
| Pure Performance base | 96 g | 500 ml at ₹1,099.00 | ₹211.01 |
| Jasmine Fragrance Oil | 24 g | 500 g at ₹1,961.00 | ₹94.13 |
| Gold bottle 120 ml | 1 | 10 at ₹1,062.00 | ₹106.20 |
| Fibre reeds, black | 6 | 50 at ₹400.00 | ₹48.00 |
| Total | ₹459.34 |
This excludes labour, packaging, labels, freight and GST. The base is the largest single line, so the oil you choose matters less to cost than many makers expect. Swap in a 1 kg Lavender pack and the oil line becomes ₹125.30; a 1 kg Cucumber Green Tea pack brings it to ₹79.86. A 120 ml bottle holds more liquid than a 50 ml one, but a bigger bottle does not by itself throw further.
From trial cart to first production run
Buy small first. A trial cart of the 100 g Pure Performance base, a 50 g jasmine pack, 25 black reeds, ten 50 ml bottles and a scale comes to ₹1,971.00 before shipping. The liquid in your first 100 g batch costs about ₹352.00 of that. If a different family suits your range better, the Lift base page is written for florals and fresh scents and the Longevity base page for woody and resinous ones; both are page claims for you to verify in the same test plan.
Only after a formula has passed the rest check and two weeks of logging should you move to 500 ml base packs and 500 g or 1 kg oil packs. For larger runs, the largest oil pack is 1 kg; ask on WhatsApp at +91 7397976926 for a quote, a GST invoice and the SDS and IFRA documents for the oils you plan to use. CSI ships across India from Pune and publishes no minimum order, discount or lead time.
Your first reed diffuser trial: what to put in the cart
These are the listings for a first 100 g trial, in the order to buy them. Start with the small packs and move up only after a formula passes your two-week log. Tap any product image or button to open its product page.





CANDLEMAKINGSUPPLIESINDIA supplies raw materials and equipment, not finished products. This guide separates general making practice from what CSI's product pages state, treats product-page phrases as claims for you to test, and says plainly where CSI does not sell an item or does not publish a figure. Every load, test step and quantity here is a starting point for your own trials, not a guaranteed result.
Prices are live CSI prices checked in November 2026; product pages are authoritative. Larger quantities are shown as multiples of listed packs; ask for a quote rather than assuming a discount.
For bulk quotes, GST invoicing, IFRA and MSDS documents, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- How Much Fragrance Oil for a 100 ml Reed Diffuser?
- Best Fragrance Oils for Reed Diffusers
- How Many Reed Sticks Should I Use?
- Cost to Manufacture 100 Reed Diffusers
- How Do I Start a Profitable Reed Diffuser Business in India — From Choosing the Correct Base and Fragrance Percentage to Testing Diffusion, Calculating Cost per Bottle and Purchasing Raw Materials Wholesale from CSI?
- I Want to Make a 120 ml Luxury Reed Diffuser That Smells Strong Throughout a Bedroom — Which Base, Fragrance Percentage and Reeds Should I Start Testing?
Customer reviews: Genuine, published Judge.me reviews — Anonymous (5★, verified); Judy Roy (5★, verified); Priyanka Purohit (5★, verified); Tina Raha (4★, verified); Payal Patel (5★, verified); Renam Dhoundiyal (4★, verified). Names, ratings, dates and products as recorded by Judge.me.
Product facts (November 2026, CSI live store): Pure Performance Reed & Car Diffuser Base: 100 g ₹325.00, 500 ml ₹1,099.00 — clear base for even wicking and full fragrance expression · no added fixatives · blend with 10–30% fragrance oil · the only base sold in a 100 g pack. Jasmine Fragrance Oil: 15 g ₹103.00, 50 g ₹230.00, 100 g ₹430.00, 500 g ₹1,961.00, 1 kg ₹3,923.00 — single-note jasmine: sweet, floral, slightly musky · flashpoint 185°C · 0% vanillin · candle load up to 10%. Fibre Diffuser Reeds (Black): Pack of 25 ₹236.00, Pack of 50 ₹400.00, Pack of 100 ₹800.00, Pack of 500 ₹4,000.00 — length 20.3 cm · diameter not published · page claims uniform pores and no clogging. Gold Reed Diffuser Bottle (Pack of 10): 50 ml × 10 ₹826.00, 120 ml × 10 ₹1,062.00 — clear glass, gold-tone screw cap · variants are 50 ml and 120 ml (description text says 50 and 100 ml) · CSI sells no 100 ml or 200 ml diffuser bottle. Candle Making Weighing Scale: Each ₹354.00 — digital, grams or ounces · capacity and resolution not published. Silicone Measuring Beaker 100 ml: Each ₹300.00 — silicone, graduated.
Assumptions: Percentages are by weight of the finished mix unless stated. Where millilitres are converted to grams, 1 ml is treated as about 1 g for illustration only — weigh your own blend. Every load, test day and quantity is a suggested starting point. Per-unit costs exclude labour, packaging, freight and GST. Product pages are authoritative.