How to Test Car Spray Packaging
How to Test Car Spray Packaging
Does CSI publish pump output or leak ratings? No. CSI publishes no thread, output, leak or heat figures for its 8 ml or 50 ml spray bottles, so you measure them yourself.
How do I measure spray output? Weigh the bottle, give 10 presses into a tissue, weigh again and divide the grams lost by 10.
How much does a first test round cost in bottles? Six 50 ml bottles and one pack of five 8 ml bottles come to ₹372.00 in bottles at current prices.
What actually fails in a car spray pack
Fragrance and base get most of the attention, but most returns on small sprays come from the pack itself. CSI sells two spray formats: the 8 ml Glass Bottle with Spray and Cap in packs of 5 (₹120.00, which works out to ₹24.00 per bottle) and the 50 ml Room Spray Bottle with Golden Spray at ₹42.00 each. CSI does not publish thread specifications, pump output per press, leak ratings or heat ratings for either bottle, so every one of those questions has to be answered by your own test on your own filled bottles.
Think of the pack as six separate parts that can each fail: the seal between pump and glass, the pump mechanism, the glass under warmth, the liquid against fabric, the label against oil, and the cap against the actuator. A single checklist that touches all six, run on every new oil and every new bottle batch, is the whole method on this page.
| Test | What it catches | How to run it | Pass looks like |
|---|---|---|---|
| Leak (inverted and on its side) | Loose collar, poor pump seat, cracked neck | Weigh, lay on tissue for 24 h upright, 24 h on side, 24 h inverted, weigh again | Dry tissue, weight change within your scale's normal wobble |
| Pump priming | Dip tube too short, sticky valve, air lock | Count presses from a fresh fill until a full mist appears | The same count on every bottle in the batch, and a count you are happy to print on the label |
| Spray output | Inconsistent dose between bottles | Weigh bottle, give 10 presses into a tissue, weigh again, divide by 10 | Bottles in the batch read close to each other |
| Warmth | Seal softening, pressure weeping, glass stress | Supervised warm cabinet or shaded parked car with a thermometer, labelled bottles, logged temperature | No weeping, no cracks, cap still tight after cooling |
| Fabric staining | Oil marks, colour change on upholstery | Spray a scrap of similar fabric or an unseen patch, check at 1 h and 24 h | No ring, no darkening, no tackiness |
| Label and cap fit | Smudged print, lifting edges, loose cap | Rub label with a fragranced fingertip, drop-test the cap on a soft surface | Text legible, edges flat, cap stays put |
Leak and pump tests by weight
Eyes miss slow leaks; a scale does not. Fill each test bottle with your finished spray, screw the pump down firmly by hand, wipe the outside, and weigh it on a digital scale such as the Candle Making Weighing Scale. CSI does not publish that scale's resolution, so before you begin, weigh the same empty bottle five times and note how much the reading moves. Any change smaller than that wobble is noise, not a leak.
Then set the bottles on tissue in three positions over three days: upright, on the side and inverted. A wet ring on tissue at the collar points to the seal; a wet patch near the actuator points to the pump. Car sprays live in door pockets and glove boxes, so the side position matters most.
A controlled warmth test, not a hot-car gamble
Indian cabins get hot, and warmth is where glass, seals and liquid interact badly. CSI publishes no heat rating for either spray bottle and no cabin-temperature data for the Room & Linen Spray Base, whose own page describes room and fabric use; car use is your own test. Keep that test controlled: a supervised warm cabinet, or a shaded parked car with a thermometer beside the bottles, a label on every bottle with the date and your contact, and a fixed time to collect them. Never leave unlabelled test bottles in a car, never test near a flame, and never warm sealed glass on a stove or in an oven.
Log the thermometer reading at the start and end of each session in your own notes. After the bottles cool, check three things: is the cap still tight, is there any liquid around the collar, and does the pump still prime in the same number of presses. Glass plus warmth plus liquid can lead to leaks or cracks, so inspect each bottle under good light before it goes back into stock.
Fabric staining, label rub and safe-use wording
A car spray will land on seats, mats and headliners whether or not you tell people to aim into the air. Spray a scrap of fabric similar to common upholstery, or an unseen patch in your own car, from the distance you will print on the label. Check at one hour and again at 24 hours for rings, darkening or a tacky feel. If you see a mark, lower the fragrance load and retest before blaming the bottle.
For the label itself, rub a fingertip wetted with your fragranced spray across the printed surface ten times. If the ink lifts or the edge curls, change the label stock or add a clear overlay before you scale up. Small 8 ml bottles leave little room, so check that the safe-use line is still readable at the font size you can fit.
Building a small test batch and a reusable log
You do not need a production run to test packaging. A sensible first round is six 50 ml bottles (6 × ₹42.00 = ₹252.00) plus one pack of five 8 ml bottles at ₹120.00, which puts the bottle cost of the round at ₹372.00. Use one fragrance oil you already know, such as Blue Ocean Fragrance Oil, so that any fault you find belongs to the pack rather than a new formula.
Weigh your own fill rather than trusting the millilitre figure, because CSI does not publish the density of the spray base. As a worked example, if a filled 50 ml bottle holds 40 g of liquid and you blend at 10%, the bottle carries 4 g of oil and 36 g of base; six bottles need 24 g of oil and 216 g of base. Replace 40 g with your own measured fill.
| Bottle code | Fill weight (g) | Presses to prime | g per press | Leak result | Warmth result | Fabric and label |
|---|---|---|---|---|---|---|
| A1 (50 ml) | your reading | your count | your reading | dry / damp at collar | tight / weeping | clean / ring / smudge |
| B1 (8 ml) | your reading | your count | your reading | dry / damp at collar | tight / weeping | clean / ring / smudge |
Clean funnels, beakers and the outside of bottles between oils with Isopropyl Alcohol Spray; it is a cleaning product, not a spray carrier, and it should never go into the formula. For larger runs, quotes, GST invoices and the SDS or IFRA documents for an oil, message CSI on WhatsApp at +91 7397976926; CSI publishes no MOQ, discount or lead time.
Your packaging test round: bottles, base and tools to order
Everything here is for a small test round of six 50 ml and five 8 ml sprays. Order the bottles first, then the base and one familiar oil. Tap any product image or button to open its product page.






CANDLEMAKINGSUPPLIESINDIA supplies raw materials and equipment, not finished products. This guide separates general making practice from what CSI's product pages state, treats product-page phrases as claims for you to test, and says plainly where CSI does not sell an item or does not publish a figure. Every load, test step and quantity here is a starting point for your own trials, not a guaranteed result.
Prices are live CSI prices checked in November 2026; product pages are authoritative. Larger quantities are shown as multiples of listed packs; ask for a quote rather than assuming a discount.
For bulk quotes, GST invoicing, IFRA and MSDS documents, message us on WhatsApp at +91 7397976926.
Frequently asked questions
Customer reviews: Genuine, published Judge.me reviews — Renam Dhoundiyal (4★, verified); Thenirvaofficial (4★, verified); Sooraj R (5★, verified); Yashvi Shah (5★, verified); Avanthi Cheeli (5★, verified); Akansha (4★, verified). Names, ratings, dates and products as recorded by Judge.me.
Product facts (November 2026, CSI live store): 50 ml Room Spray Bottle with Golden Spray: Each ₹42.00 — 50 ml bottle with golden spray mechanism · page mentions home, office or car use. 8 ml Glass Bottle with Spray and Cap (Pack of 5): Pack of 5 ₹120.00 — 8 ml glass bottle with spray pump and cap · ₹24.00 per bottle. Room & Linen Spray Base: 500 g ₹999.00 — page: add 8–15% fragrance oil or essential-oil blend · fast-dry room and fabric spray base. Blue Ocean Fragrance Oil: 15 g ₹93.22, 50 g ₹247.00, 100 g ₹495.00, 500 g ₹2,478.00, 1 kg ₹4,956.00 — top sea salt and ozone, heart jasmine and lily of the valley, base driftwood and musk · 0% vanillin · phthalate-free. Candle Making Weighing Scale: Each ₹354.00 — digital, grams or ounces · capacity and resolution not published. Isopropyl Alcohol Spray: 150 ml ₹383.00, 1 litre ₹520.00 — isopropyl alcohol for cleaning tools and glass · not a perfumer's alcohol and not a fragrance carrier.
Assumptions: Percentages are by weight of the finished mix unless stated. Where millilitres are converted to grams, 1 ml is treated as about 1 g for illustration only — weigh your own blend. Every load, test day and quantity is a suggested starting point. Per-unit costs exclude labour, packaging, freight and GST. Product pages are authoritative.