I Am Making Reed Diffusers With 25% Fragrance Oil — Could a Different Concentration Improve Summer Performance Without Reducing Room Throw?
शेयर करना
I Am Making Reed Diffusers With 25% Fragrance Oil — Could a Different Concentration Improve Summer Performance Without Reducing Room Throw?
Will cutting the oil make the bottle last longer? Not by the route you are imagining. Reducing the load does not reduce the volume in the bottle — it replaces oil with carrier. At 25% a 120 ml bottle is 90 ml of base and 30 g of oil; at 10% it is 108 ml of base and 12 g of oil. Both are 120 ml of liquid that has to leave. What you have definitely given up is fragrance.
Does a higher load cost more? It depends which base pack you buy, which is a genuinely odd answer and a true one. On the 500 ml pack at ₹2.198/ml, every extra point of load costs money with most oils. On the 100 g pack at ₹3.25/g, any oil below ₹3.25 a gram makes a higher load cheaper per kilo of blend — and Citrus Lemon is ₹3.00 at 100 gm and ₹2.832 at the kilo.
So what should I change? Probably not the load, and certainly not first. The load is a formula change that requalifies clarity, throw and consumption. Placement is free, reed count is ₹8.00 a reed and reversible, and a base swap between four of the five bases is ₹0. Exhaust those, then bracket the load at 20%, 25% and 30% with a cool-stored control, and read every arm on consumption and throw.
- The straight answer
- How much room the published window actually leaves you
- The fill does not change when the load does
- A percentage of what? Mass, volume and the density nobody publishes
- Cost is a straight line, so the cheapest load is an endpoint
- Testing a load change without losing throw
- What to buy
- FAQ
The deeper issue is the mechanism. Makers reach for a lower load because it feels like putting less volatile material in the bottle. But the load does not change how much liquid is in the bottle — it changes the ratio of two liquids. A 120 ml bottle at 25% is 90 ml of base plus 30 g of oil; at 10% it is 108 ml of base plus 12 g of oil. Both are a full 120 ml bottle. At the published 25% ratio the carrier is three-quarters of what you sell, and across the whole window it is 70% to 80% of it — so most of what leaves a reed diffuser in May is base, not fragrance. Cutting the oil does not remove something that had to evaporate; it removes the thing your customer paid for.
What the load does change, exactly and knowably, is cost. Cost per kilo of blend is linear in the load: 1,000 × base ₹/g + 10L × (oil ₹/g − base ₹/g). A straight line has no minimum in the middle, so the cheapest load is always an endpoint of the published window — and the direction depends on a single comparison. The Pure Performance 100 g pack is ₹325, so ₹3.25 a gram. Citrus Lemon at the kilo is ₹2.832 a gram — cheaper than the base — so with that oil a 30% blend costs ₹3,124.60 a kilo against ₹3,208.20 at 10%. More fragrance, less money. With Coffee Vanilla Tobacco at ₹8.99 a gram the same move costs ₹1,148 a kilo more.
So: if you want summer performance, spend your effort on placement (free, and CSI's own published guidance), reed count (₹8.00 a reed, reversible, and the page says plainly that the base evaporates faster at higher counts) and the base swap that costs ₹0 between four of the five bases. If you still want to move the load after that, bracket 20%, 25% and 30% against a cool-stored control, keep everything else frozen, and read each arm on grams lost per day and a blind intensity note. Never on days alone.
How much room the published window actually leaves you
Every one of the five Reed & Car Diffuser base pages carries the same three published numbers, and they are the only formulation figures in the range: "Blend with 10-30% fragrance oil", a 25–30% working ratio, and a 24–48 hour rest before bottling. There is no fourth number. No page states an optimum, a summer figure, a winter figure, or a load that produces a given throw or a given number of days.
Read against that, your 25% is not an arbitrary choice that happens to be high — it is the bottom of the stated working ratio. So the moves available to you are not symmetrical. Going up to 30% keeps you inside both the window and the working ratio. Going down to 20% keeps you inside the window but steps outside the working ratio the pages name. Going below 10% leaves the published window altogether, and nothing in this guide or in the catalogue supports a load outside it.
| Load | Inside the published 10–30% window? | Inside the stated 25–30% working ratio? | What it is in a 120 ml bottle | What you should expect to have to re-test |
|---|---|---|---|---|
| Below 10% | No | No | Outside the window — not a load this guide will cost | Not a route; no page supports it |
| 10% | Yes — the floor | No | 108 ml base + 12 g oil | Throw first, and the whole claim on your label |
| 15% | Yes | No | 102 ml base + 18 g oil | Throw, and clarity if you change oil at the same time |
| 20% | Yes | No — but Depth's dose cards mark 20% "Recommended" | 96 ml base + 24 g oil | Throw, consumption, and which of the two Depth statements you are following |
| 25% — where you are | Yes | Yes — the bottom of it | 90 ml base + 30 g oil | Nothing; this is your reference |
| 30% | Yes — the ceiling | Yes — the top of it | 84 ml base + 36 g oil | Clarity and compatibility above all: higher loads are where cloudiness and separation show up |
| Above 30% | No | No | Outside the window | Not a route; the window is a formulation limit CSI publishes and this guide holds to it |
One contradiction in the range belongs in this section rather than buried later, because it is exactly about load. Depth's own page disagrees with itself: its details table says "70-75% Depth Base with 25-30% fragrance oil", while its dose cards mark 20% as "Recommended". Both figures sit inside the published 10–30% window, so neither is unsafe, but they point at different formulas. It is named here and not resolved. If you build on Depth, choose one of the two, write it into your specification, and hold it constant for the whole trial — the worst outcome is a batch record that does not say which guidance it followed.
The fill does not change when the load does
This is the single most useful sentence on the page, so it gets a section to itself. When you reduce the fragrance load you do not take liquid out of the bottle. You swap one liquid for another and leave the total alone. The table below is the same 120 ml bottle at five loads, and the fourth column never moves.
| Load | Base | Oil | Total liquid in the bottle | Carrier share of the fill | Raw material cost |
|---|---|---|---|---|---|
| 10% | 108 ml · ₹237.38 | 12 g · ₹36.00 | 120 ml | 90% | ₹273.38 |
| 15% | 102 ml · ₹224.20 | 18 g · ₹54.00 | 120 ml | 85% | ₹278.20 |
| 20% | 96 ml · ₹211.01 | 24 g · ₹72.00 | 120 ml | 80% | ₹283.01 |
| 25% | 90 ml · ₹197.82 | 30 g · ₹90.00 | 120 ml | 75% | ₹287.82 |
| 30% | 84 ml · ₹184.63 | 36 g · ₹108.00 | 120 ml | 70% | ₹292.63 |
| Across the whole window | −24 ml of base | +24 g of oil | No change | 90% down to 70% | +₹19.25, or ₹19,250 per 1,000 bottles |
Now read the carrier-share column again, because it is the reason this cluster keeps coming back to the base rather than the fragrance. Across the entire published window the carrier is between 70% and 80% of what you are selling. Whatever is happening to your bottle in a hot Pune flat in May is happening overwhelmingly to the base. A 15-point cut in fragrance load — from 25% to 10% — changes the composition of the fill by 15 points and changes the quantity of liquid that has to leave by nothing at all.
Does that mean a lower-load bottle behaves identically? No, and it would be dishonest to claim it. Whether a 10% blend and a 30% blend of the same pair empty at the same rate is not published for any base or oil in this range — no evaporation rate, volatility figure or viscosity appears anywhere in the catalogue. What can be said with certainty is that the mechanism makers assume is absent, because the bottle is equally full either way. If a load change does alter consumption, it does so through the mixture's behaviour — the thing you would have to measure rather than assume.
A percentage of what? Mass, volume and the density nobody publishes
Before you can bracket 20%, 25% and 30% you have to answer a question the catalogue does not: a percentage of what? The base pages say "Blend with 10-30% fragrance oil" and name a 25–30% working ratio without stating whether those are proportions by mass or by volume. That is not a small ambiguity. Base is sold by the millilitre at the 500 ml rung and by the gram at the 100 g rung, oil is sold by the gram throughout, and no density is published for any base or any oil in the range — so there is no legitimate way to convert one into the other.
The practical consequence is that you have to choose a basis, write it on the specification sheet, and never silently change it. Both are defensible. Mass is the more repeatable for a production business — a scale does not care about meniscus or how carefully someone poured — and it is what the 100 g base pack exists to serve. Volume is easier when filling a known bottle to a known line, which is how most small runs are built.
| Load | By mass: oil for 100 g of base | Blend produced | Cost of that blend at ₹3.00/g oil | Per kilo of blend | By volume in a 120 ml bottle |
|---|---|---|---|---|---|
| 10% | base ÷ 9 = 11.11 g | 111.11 g | ₹325 + ₹33.33 = ₹358.33 | ₹3,225.00 | 108 ml base + 12 g oil |
| 15% | base × 3 ÷ 17 = 17.65 g | 117.65 g | ₹325 + ₹52.94 = ₹377.94 | ₹3,212.50 | 102 ml base + 18 g oil |
| 20% | base ÷ 4 = 25.00 g | 125.00 g | ₹325 + ₹75.00 = ₹400.00 | ₹3,200.00 | 96 ml base + 24 g oil |
| 25% | base ÷ 3 = 33.33 g | 133.33 g | ₹325 + ₹100.00 = ₹425.00 | ₹3,187.50 | 90 ml base + 30 g oil |
| 30% | base × 3 ÷ 7 = 42.86 g | 142.86 g | ₹325 + ₹128.57 = ₹453.57 | ₹3,175.00 | 84 ml base + 36 g oil |
Notice something odd and important in that table, because it is the clearest reason to decide the basis deliberately. Read by mass, a higher load is cheaper per kilo of blend with Citrus Lemon — ₹3,175 at 30% against ₹3,225 at 10%. Read by volume in a 120 ml bottle, the higher load is dearer — ₹292.63 at 30% against ₹273.38 at 10%. Both are correct arithmetic on live prices. They differ because the base's two rungs are priced in different units: ₹3.25 a gram at the 100 g pack and ₹2.198 a millilitre at the 500 ml pack, and without a density those are not two prices for the same thing. Which one governs your costing depends entirely on which pack you buy. That is a real commercial fact about this range and not a trick of presentation, and the next section works it out properly.
Cost is a straight line, so the cheapest load is an endpoint
Here is the arithmetic that makes the load decision tractable, and it is worth learning once because it applies to every oil in the range. A kilogram of finished blend at load L contains (1,000 − 10L) grams of base and 10L grams of oil. So its cost is:
Cost per kg of blend = 1,000 × base ₹/g + 10L × (oil ₹/g − base ₹/g)
That is a straight line in L. Its slope is ten times the difference between the two per-gram prices, and its intercept is a kilogram of plain base. A straight line has no minimum in the middle, which means the cheapest load inside the published window is always 10% or 30% and never 22% or 24%. And the direction depends on one comparison: the Pure Performance 100 g pack is ₹325, so ₹3.25 a gram is the pivot. Oils dearer than that make a higher load dearer. Oils cheaper than that make a higher load cheaper.
| Oil and rung | ₹ a gram | At 10% | At 20% | At 25% | At 30% | 10% → 30% |
|---|---|---|---|---|---|---|
| Citrus Lemon, 1 kg ₹2,832 | ₹2.832 | ₹3,208.20 | ₹3,166.40 | ₹3,145.50 | ₹3,124.60 | −₹83.60 — cheapest at 30% |
| Citrus Lemon, 100 gm ₹300 | ₹3.00 | ₹3,225.00 | ₹3,200.00 | ₹3,187.50 | ₹3,175.00 | −₹50.00 — cheapest at 30% |
| British Rose, 1 kg ₹3,068 | ₹3.068 | ₹3,231.80 | ₹3,213.60 | ₹3,204.50 | ₹3,195.40 | −₹36.40 — cheapest at 30% |
| Eucalyptus Spearmint, 1 kg ₹3,068 | ₹3.068 | ₹3,231.80 | ₹3,213.60 | ₹3,204.50 | ₹3,195.40 | −₹36.40 — cheapest at 30% |
| Eucalyptus Spearmint, 100 gm ₹354 | ₹3.54 | ₹3,279.00 | ₹3,308.00 | ₹3,322.50 | ₹3,337.00 | +₹58.00 — cheapest at 10% |
| Roasted Coffee, 100 gm ₹390 | ₹3.90 | ₹3,315.00 | ₹3,380.00 | ₹3,412.50 | ₹3,445.00 | +₹130.00 — cheapest at 10% |
| Verbena, 100 gm ₹590 | ₹5.90 | ₹3,515.00 | ₹3,780.00 | ₹3,912.50 | ₹4,045.00 | +₹530.00 — cheapest at 10% |
| Coffee Vanilla Tobacco, 100 g ₹899 | ₹8.99 | ₹3,824.00 | ₹4,398.00 | ₹4,685.00 | ₹4,972.00 | +₹1,148.00 — cheapest at 10% |
| Plain base, no oil at all | ₹3.25 | ₹3,250.00 | ₹3,250.00 | ₹3,250.00 | ₹3,250.00 | ₹0 — the pivot, and not a product |
Three practical conclusions come out of that table. First, very few oils in this range sit on the cheap side of the pivot. Citrus Lemon does at every rung from 100 gm up, and British Rose and Eucalyptus Spearmint do once you buy the kilo — their 1 kg packs are both ₹3,068, which is ₹3.068 a gram. Almost everything else is dearer than the base, so for most formulas the lower load is the cheaper one.
Second, the sums are small for a cheap oil and large for an expensive one: moving across the whole window is ₹83.60 a kilo with Citrus Lemon's kilo rung and ₹1,148 with Coffee Vanilla Tobacco's 100 g rung, a factor of fourteen.
Third, and most importantly: none of this is a performance argument. The table says what each load costs, not what it smells like or how long it lasts. Load and throw are not published as a relationship anywhere in the range, and anyone who tells you that 20% throws 80% as hard as 25% has made it up. That number is a measurement you take, and the next section is how to take it.
Testing a load change without losing throw
A load bracket is three arms and a control, and it is readable only if the load is the sole thing that differs. The reason to be strict about that here more than anywhere else is that a load change moves two things at once — the amount of fragrance and the amount of carrier — so there is no version of this test where you can be casual about the rest of the specification.
| Line | Bought | Price | Consumed by the test |
|---|---|---|---|
| Glass | 120 ML Pack of 10 | ₹1,062 | 4 bottles · ₹424.80 · six spare for repeats |
| Reeds | Pack of 25 black | ₹236 | 24 reeds in three bottles · ₹226.56 · the control takes none |
| Base | Pure Performance 500 ML | ₹1,099 | 96 + 90 + 84 + 90 = 360 ml · ₹791.28 |
| Oil | Citrus Lemon 100 gm + 50 gm | ₹470 | 24 + 30 + 36 + 30 = 120 g · ₹360.00 |
| Instrument | Candle Making Weighing Scale | ₹354 | Reused by every batch after this one |
| Total bought | Five lines, all whole listed packs | ₹3,221 | ₹1,802.64 of material actually used |
| What the answer is worth | Per 1,000 bottles, 25% → 20% | ₹4,810 saved | Only if throw survives — which is what the test is for |
What to buy
Four lines, chosen for the arithmetic above rather than for the shelf. The base rung that lets you work by weight, the one oil family that sits on the cheap side of the pivot at every rung, a second oil whose kilo crosses the pivot, and the instruments without which a load bracket is three opinions.
| Variant | Price | Unit price | What it is for here |
|---|---|---|---|
| 100 g | ₹325 | ₹3.25 a gram | Working by mass; the pivot in every cost-per-kilo row |
| 500 ML | ₹1,099 | ₹2.198 a millilitre | Production; 5.56 bottles at a 90 ml fill |
| Published window | 10-30% | Working ratio 25–30% | Rest 24–48 hours before bottling |
| Rung | Price | Per gram | Against the ₹3.25 pivot |
|---|---|---|---|
| 15 gm | ₹81.42 | ₹5.428 | Above — screening rung only |
| 50 gm | ₹170 | ₹3.40 | Above, just |
| 100 gm | ₹300 | ₹3.00 | Below — higher load is cheaper |
| 500 gm | ₹1,420 | ₹2.84 | Below |
| 1 kg | ₹2,832 | ₹2.832 | Below · saves ₹8 on two 500 gm · 3 packs in stock |
| Rung | Price | Per gram | Against the ₹3.25 pivot |
|---|---|---|---|
| 15 gm | ₹68.44 | ₹4.56267 | Above |
| 50 gm | ₹212.40 | ₹4.248 | Above |
| 100 gm | ₹354 | ₹3.54 | Above — higher load costs more |
| 500 gm | ₹1,652 | ₹3.304 | Above, barely |
| 1 kg | ₹3,068 | ₹3.068 | Below · saves ₹236 on two 500 gm |
| Item | Price | What it does in a load bracket |
|---|---|---|
| Candle Making Weighing Scale | ₹354 | Hits the oil mass exactly; weighs every checkpoint |
| Silicon Measuring Beaker 100 ML | ₹300 | Single-arm mixing |
| Silicon Measuring Beaker 250 ML | ₹600 | Three arms in one session |
| CSI Pro Mixer | ₹349 | Even blending before the 24–48 hour rest |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials, not finished diffusers. A supplier's commercial interest in this question runs towards telling you to use more oil, and the most-quoted row in the cost table does exactly that — with Citrus Lemon, a 30% blend is cheaper per kilo than a 10% one. But the honest conclusion of this page is that the load is probably not your summer problem, and that the free levers come first. We publish no evaporation rate, no volatility, no viscosity, no density, no storage temperature, no shelf life and no product life for any base, fragrance oil, reed or bottle, and no relationship between fragrance load and either throw or longevity is published anywhere in the range. Anyone who quotes you one has invented it.
Stated specifications are quoted only where a page publishes them: every reed base page states "Blend with 10-30% fragrance oil", a 25–30% working ratio and a 24–48 hour rest before bottling; Pure Performance states that it "performs well in Indian climates by balancing scent throw with longevity"; Depth says it "slows evaporation" and "stabilises tricky sweet and spicy fragrance oils", lists fresh citrus, light florals and aquatics under Avoid, and carries a contradiction on load — its details table says "70-75% Depth Base with 25-30% fragrance oil" while its dose cards mark 20% as "Recommended", which is named here and not resolved; Longevity claims "extended cold diffusion". The fibre reed pages state 20.3 cm, "uniform pore structure — no swelling, no clogging, no splitting", 6–8 reeds for a 50–100 ml bottle and "avoid placing in direct sunlight or near heat sources which accelerate evaporation". The published 10–30% window is a formulation window, not a safety limit; compliance and labelling belong with a qualified adviser working from your own supplier documentation.
For bulk pricing, GST invoicing, quantities above the listed 1 kg oil pack and 500 ml base pack, or documentation on any product, message us on WhatsApp at +91 7397976926. If you run a three-arm load bracket and want a second pair of eyes on the weighed log and the blind rankings before you change a production formula, send them over.
Frequently asked questions
- A lemon diffuser emptying quickly — citrus oil or slower base?
- Balancing throw against realistic longevity in non-air-conditioned homes
- Going from 20% to 30% — compatibility and diffusion
- The most economical fragrance percentage, comparing throw, life and cost
- Saving per 1,000 bottles by dropping 25% to 20% — if it passes testing
- Formulating by weight rather than volume
- Does more fragrance oil always mean more throw?
Customer reviews: The ten reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on their product pages. Names, star ratings, dates and products are as recorded by Judge.me; wording is unedited. They describe fragrance oils and dyes used in candles and hardware as supplied; none of them is a measurement of diffuser throw, liquid consumption or product life, and none of them is evidence about a fragrance load.
Figures verified October 2026: Bases — Pure Performance ₹325 / 100 g = ₹3.25/g and ₹1,099 / 500 ML = ₹2.198/ml, which cannot be reconciled because no density is published; Depth, Lift and Softness ₹1,099 / 500 ml; Longevity ₹1,296 / 500 ml = ₹2.592/ml. Volume arithmetic in a 120 ml bottle: base = 120 × (1 − load) so 108, 102, 96, 90 and 84 ml at 10%, 15%, 20%, 25% and 30%, costing ₹237.38, ₹224.20, ₹211.01, ₹197.82 and ₹184.63; oil = 120 × load read in grams, so 12, 18, 24, 30 and 36 g, costing ₹36.00, ₹54.00, ₹72.00, ₹90.00 and ₹108.00 at Citrus Lemon's ₹3.00/g; totals ₹273.38, ₹278.20, ₹283.01, ₹287.82 and ₹292.63, a span of ₹19.25 a bottle, ₹19,250 per 1,000, and a 25% to 20% gap of ₹4.81 a bottle or ₹4,810 per 1,000. Mass arithmetic: oil = base × L ÷ (1 − L), so base ÷ 9, base × 3 ÷ 17, base ÷ 4, base ÷ 3 and base × 3 ÷ 7, giving 11.11, 17.65, 25.00, 33.33 and 42.86 g from a 100 g base pack and blends of 111.11, 117.65, 125.00, 133.33 and 142.86 g. Cost per kilo of blend = 1,000 × ₹3.25 + 10L × (oil ₹/g − ₹3.25), tabulated in full above for eight oil-and-rung combinations at 10, 20, 25 and 30%; the per-point slopes are 10 × (oil ₹/g − ₹3.25), so −₹4.18 for Citrus Lemon's kilo rung up to +₹57.40 for Coffee Vanilla Tobacco's 100 g, and plain base is ₹3,250 a kilo at every load. Oil ladders: Citrus Lemon ₹81.42 / 15 gm, ₹170 / 50 gm, ₹300 / 100 gm, ₹1,420 / 500 gm, ₹2,832 / 1 kg = ₹5.428, ₹3.40, ₹3.00, ₹2.84 and ₹2.832 a gram, kilo saving ₹8 against two 500 gm packs with the 1 kg variant at three packs when checked; Eucalyptus Spearmint ₹68.44 / 15 gm, ₹212.40 / 50 gm, ₹354 / 100 gm, ₹1,652 / 500 gm, ₹3,068 / 1 kg = ₹4.56267, ₹4.248, ₹3.54, ₹3.304 and ₹3.068 a gram, kilo saving ₹236, with 28 and 90 units at the 100 gm and 500 gm rungs when checked. Bracket rig: 120 ML Pack of 10 ₹1,062, Pack of 25 black reeds ₹236, Pure Performance 500 ML ₹1,099, Citrus Lemon 100 gm ₹300 plus 50 gm ₹170, scale ₹354 — ₹3,221 bought and ₹1,802.64 of material consumed across four bottles using 360 ml of base and 120 g of oil. No CSI base, fragrance oil, reed or bottle page publishes an evaporation rate, a volatility figure, a viscosity, a density, a product life, a shelf life, a storage temperature or a coverage area, and none is stated, estimated or implied here. No relationship between fragrance load and either scent throw or product life is published anywhere in the range, and none is asserted on this page: throw is a coded blind panel judgement against a cool-stored control from the same batch, and consumption is grams on a scale at fixed checkpoints. Every temperature, season and day-count belongs to the reader. Heat and airflow are described qualitatively only — no rate, percentage, multiplier or per-degree figure appears — and no short elevated-temperature observation is converted into real-time product life. Stated specifications as published: reed bases "Blend with 10-30% fragrance oil", 25–30% working ratio, 24–48 hour rest before bottling; Pure Performance "performs well in Indian climates by balancing scent throw with longevity"; Depth "slows evaporation", "stabilises tricky sweet and spicy fragrance oils", fresh citrus, light florals and aquatics under Avoid, and its details table's "70-75% Depth Base with 25-30% fragrance oil" against its dose cards' 20% "Recommended" — named, not resolved; Longevity "extended cold diffusion"; fibre reeds 20.3 cm, "uniform pore structure — no swelling, no clogging, no splitting", 6–8 reeds for a 50–100 ml bottle, "avoid placing in direct sunlight or near heat sources which accelerate evaporation". CSI lists no 100 ml and no 200 ml reed bottle, and no DPG, DPM, CCT, Augeo-type solvent or perfumer's alcohol. The published 10–30% blend range is a formulation window published by CSI, not a safety limit; for anything certified or approved by IFRA, work from your supplier's own documentation and a qualified adviser. Prices and availability change — the linked product pages are always authoritative.