I Am Making Reed Diffusers With a DPM-Based Formula — How Do I Evaluate Fragrance Oil Compatibility and Wicking During Warm-Weather Testing?
शेयर करना
I Am Making Reed Diffusers With a DPM-Based Formula — How Do I Evaluate Fragrance Oil Compatibility and Wicking During Warm-Weather Testing?
How do I test compatibility? Blend at your supplier's stated load, rest, and look at it properly. The published instruction on CSI's own base pages is a 24–48 hour rest before bottling, and the only honest way to judge haze is against a cool-stored twin poured from the same beaker, photographed against a printed grid.
How do I test wicking without a reed diameter? Soak and weigh. Weigh the dry bundle, soak it to a fixed depth for a fixed time, let it drain for a fixed time, weigh it wet. (wet − dry) ÷ reed count = grams gained per reed. That single figure replaces every specification the pages do not carry.
What do the reed pages actually publish? 20.3 cm, "uniform pore structure — no swelling, no clogging, no splitting", "consistent diffusion from day 1 to day 30" and 6–8 reeds for a 50–100 ml bottle — a band that does not reach the 120 ml bottle the same range sells.
- The straight answer
- DPM is not a CSI material — what that changes here
- What the reed pages publish, and what they do not
- Soak and weigh: the measurement that replaces the diameter
- The compatibility half, run as pairs
- Warm-weather testing, and the line it cannot cross
- What to buy, and at which rung
- FAQ
DPM is not a CSI material — what that changes here
Let us be precise about the gap, because precision here protects you later. You are formulating on a glycol-ether type carrier solvent that fragrance suppliers sell under that abbreviation. That is a description of a category, not a claim about your material — and it is as far as this page goes, because CSI does not list it. There is no DPM on the store, no DPG, no CCT, no perfumer's alcohol and no individual solvent of any kind. What exists is five finished bases — Pure Performance at ₹325 for 100 g or ₹1,099 for 500 ml, Depth, Lift and Softness at ₹1,099, and Longevity at ₹1,296 — all sold as ready to blend. CSI's only alcohol listing is a 150 ml isopropyl alcohol spray, which is not a diffuser carrier.
Three consequences follow, and they are worth stating before any method.
First, the published 10–30% blend window is not yours to borrow. "Blend with 10-30% fragrance oil", the 25–30% working ratio and the 24–48 hour rest are printed on CSI's base pages and describe CSI's bases. Your carrier's load window belongs to whoever formulated and sells it. Ask for it in writing, work inside it, and record which document you took it from — because the load is the single most important number in a compatibility test and a borrowed one invalidates the result.
Second, nothing on this page will tell you how your carrier wicks. Not qualitatively, not comparatively, not "generally". There is no CSI data on it to reason from, and reasoning from a category name to a behaviour is how formulation myths start. The soak-and-weigh test below is the answer precisely because it does not require anybody's data: it produces a number from your own liquid and your own reeds.
Third, the reeds in this range are testable with your carrier even though your carrier is not sold here. Reeds are hardware. A bundle of eight black fibre reeds costs ₹64.00 and will take up whatever liquid you put under them, so a soak-and-weigh on your blend is perfectly valid — and if you later qualify a listed base, you will have a directly comparable figure for it because the instrument and the bundle did not change. That is the useful shape of this exercise: measure your current system now, so that any future swap has something to be measured against.
| Input | Listed at CSI? | Nearest listed option | Where its load window lives |
|---|---|---|---|
| Your DPM-type carrier | No — no individual solvents or carriers are listed | The five finished bases, ₹325 for 100 g or ₹1,099–₹1,296 for 500 ml | Your current supplier's own document |
| A finished reed base | Yes — five of them | Pure Performance, Depth, Lift, Softness, Longevity | Published: 10–30%, 25–30% working, 24–48 h rest |
| Fibre reeds | Yes — black and white, four pack rungs each | ₹236/₹400/₹800/₹4,000 black; ₹265/₹450/₹900/₹4,500 white | Published guidance: 6–8 reeds for a 50–100 ml bottle |
| Rattan reeds | No — fibre is the only reed type listed | The two fibre listings | Not applicable |
| Bottles | Yes — one listing, two variants, both packs of ten | 50 ML ₹826 (₹82.60 each) · 120 ML ₹1,062 (₹106.20) | No neck diameter published for either |
| Fragrance oils | Yes — a wide range, priced per gram by rung | Eucalyptus Spearmint, Citrus Lemon, Blue Ocean and many more | Load is the base's window, not the oil's |
What the reed pages publish, and what they do not
This is the section that usually disappoints and should not, because the published sentences here are more useful than a specification sheet would be if you read them carefully. Both listings — black and white — carry the same statements, and they are quotable as CSI's own words.
| Item | Published? | Exactly what is said | How you fill the gap |
|---|---|---|---|
| Length | Yes | 20.3 cm | Nothing to fill — this is the one dimension you have |
| Reeds per bottle | Yes | 6–8 reeds for a 50–100 ml bottle, and "use 10+ for maximum throw in larger rooms — the base will evaporate faster at higher reed counts" | For a 120 ml bottle you are outside the published band and the count is your own decision |
| Structure | Qualitative | "Uniform pore structure — no swelling, no clogging, no splitting" | Inspect your own reeds after a full run: swelling, residue, splitting at the neck |
| Diffusion over time | Qualitative | "Consistent diffusion from day 1 to day 30" | A weighed 30-day log with a fragrance-intensity note beside each weight |
| Heat and sunlight | Qualitative | "Avoid placing in direct sunlight or near heat sources which accelerate evaporation" | Record room temperature and sun exposure beside every reading |
| Diameter | No | Nothing stated on either page | Soak-and-weigh: grams gained per reed |
| Pore size, fibre count | No | Nothing stated beyond "uniform pore structure" | Soak-and-weigh, plus a drain-time note |
| Wicking rate | No | No rate of any kind on either page | Grams gained per reed per fixed soak time, your conditions |
| Price difference, black against white | Yes | ₹1.16 a reed at the 25-pack; exactly ₹1.00 at every rung above | The only quantified difference between the two listings |
Read the last row again, because it settles a question makers often arrive with. There is one fibre reed in this range, offered in two colours. Neither page states a diameter, so "compare thick reeds against thin reeds" is not a comparison the catalogue supports — and the only difference between black and white that can be quantified is money. White costs ₹10.60 a reed at the 25-pack against black's ₹9.44, and ₹9.00 against ₹8.00 at every rung from 50 up. Whether the two behave identically in your carrier is a question your own soak-and-weigh can answer in an afternoon, and it is worth answering before you standardise on a colour for a collection.
| Pack | Black price | Per reed | White price | Per reed | White premium per reed | Bundle of 8: black / white |
|---|---|---|---|---|---|---|
| Pack of 25 | ₹236 | ₹9.44 | ₹265 | ₹10.60 | ₹1.16 | ₹75.52 / ₹84.80 |
| Pack of 50 | ₹400 | ₹8.00 | ₹450 | ₹9.00 | ₹1.00 | ₹64.00 / ₹72.00 |
| Pack of 100 | ₹800 | ₹8.00 | ₹900 | ₹9.00 | ₹1.00 | ₹64.00 / ₹72.00 |
| Pack of 500 | ₹4,000 | ₹8.00 | ₹4,500 | ₹9.00 | ₹1.00 | ₹64.00 / ₹72.00 |
| Bundle of 6 | — | — | — | — | — | ₹48.00 / ₹54.00 |
| Bundle of 10 | — | — | — | — | — | ₹80.00 / ₹90.00 |
One more thing the band tells you, and it matters for this test's design. The published guidance covers a 50–100 ml bottle, and the bottle listing in the same range offers 50 ml and 120 ml — so the larger of the two sits outside the stated band. That is not a contradiction to resolve, it is a gap to work inside honestly: at 120 ml your reed count is your own decision, and the way to make it is a measured one. The reduce-the-reed-count post works the economics of that decision through; here we are measuring the bundle rather than choosing it.
Soak and weigh: the measurement that replaces the diameter
A diameter would have told you something about how much liquid a reed can hold and how readily it moves. You cannot have the diameter, so take the thing it was a proxy for: mass. A bundle of reeds that has absorbed liquid weighs more than it did dry, and the difference is a real, repeatable number in your own carrier.
The compatibility half, run as pairs
Compatibility is the other half of your question and it needs a different instrument: your eyes, a printed grid and a control. The procedure is short, and the control is the part that cannot be skipped.
| Checkpoint | What you look at | Vocabulary to use every time | What it establishes |
|---|---|---|---|
| Immediately after blending | The blend in the beaker | Clear / cloudy / streaked / air bubbles | Almost nothing — a fresh blend carries air and mixing warmth |
| After the rest (24–48 h) | Both bottles of the pair, grid behind | Clear / faint haze / haze / ring / layer / sediment | Your real baseline. This is the first judgement worth making |
| Warm leg, at temperature | The warm bottle | Same vocabulary, plus a photograph | A warm-state observation, which may or may not persist |
| One hour after returning to room temperature | The warm bottle again | Same vocabulary, plus a photograph | Whether the change is persistent — the column that matters for shipping |
| Same day, the cool twin | The control | Same vocabulary, same photograph discipline | The reference. Without it the rows above are opinions |
| End of run, reeds inspected | The bundle from the reeded bottle | Clean / residue / swelling / splitting / discolouration | Whether the reeds themselves changed — the pages claim "no swelling, no clogging, no splitting" |
The last row is the one that connects the two halves of this page, and it is worth doing even though it is slow. Pull the bundle out at the end of a real run, let it drain, and look at it. Residue at the waterline, a reed that has visibly swollen, a split at the neck or a colour change are all findings about the reed-and-blend pair rather than about either on its own — and if you want to be rigorous, weigh the bundle again after a wash and dry to see whether anything stayed behind. The cloudiness diagnosis post covers the liquid side of compatibility in detail; this page's contribution is that the reeds are part of the system and get inspected too.
Warm-weather testing, and the line it cannot cross
Everything above can be run warm, and running it warm is sensible for an Indian product. What a warm run cannot do is produce a longevity figure, and the distinction is sharp enough to write on the front of the log.
What CSI publishes about heat is qualitative and quotable: the reed pages tell you to "avoid placing in direct sunlight or near heat sources which accelerate evaporation", and they note that "the base will evaporate faster at higher reed counts". Pure Performance's page says it "performs well in Indian climates by balancing scent throw with longevity". That is the whole of it. No temperature appears anywhere in the range — no storage temperature, no working temperature, no heat-stability statement, no shelf life — so every temperature in your protocol is a number you chose and must label as such.
| What your log shows | What you may write | What you may not write | Next move |
|---|---|---|---|
| Stayed clear, uptake steady across three repeats | "This blend and this bundle behaved consistently under my conditions" | A wicking rate, a stability claim or a product life | Move to a weighed 30-day bottle trial with a fragrance note |
| Stayed clear, uptake scattered across repeats | "My method is drifting" — depth or drain time, most likely | That the reeds are inconsistent | Tighten the procedure and re-run before concluding anything |
| Hazy warm, clear again cool, uptake unchanged | "A reversible appearance change at temperature, no uptake effect observed" | That it is harmless — a customer may see it in a courier van | Decide against your own packaging and route, in advance |
| Hazy and stays hazy | "Persistent appearance change after my cycle" | Which half caused it — not from one arm | Run the three-pair trial that separates oil from carrier |
| Reeds show residue or swelling after a full run | "The bundle changed over the run, photographed and weighed" | A general claim about fibre reeds | Repeat with white reeds in the same blend as a second arm |
And the boundary, one more time, because it is the rule the whole series is built on: a short run at an elevated temperature screens for change — haze, sediment, colour, odour drift, a faster drop in level — and never establishes that a finished bottle will perform for a given number of days in a customer's home. No multiplier converts bench hours into shelf days for these materials. If you need a life figure for a listing or a buyer, it comes from full-life testing on more than one unit, published as a conservative figure or a range, with the room, season, airflow and reed count stated as assumptions — and validated per fragrance rather than once across a collection.
What to buy, and at which rung
Four items: both reed colours so the comparison is real, one base in case you decide to qualify a documented carrier, and one oil that is easy to buy at a sample rung and still rewards volume later.
| Size | Price | Per reed | Bundles of 8 |
|---|---|---|---|
| Pack of 25 | ₹236 | ₹9.44 | 3, with 1 reed spare |
| Pack of 50 | ₹400 | ₹8.00 | 6, with 2 spare |
| Pack of 100 | ₹800 | ₹8.00 | 12, with 4 spare |
| Pack of 500 | ₹4,000 | ₹8.00 | 62, with 4 spare |
| Size | Price | Per reed | Premium over black |
|---|---|---|---|
| Pack of 25 | ₹265 | ₹10.60 | ₹1.16 a reed |
| Pack of 50 | ₹450 | ₹9.00 | ₹1.00 a reed |
| Pack of 100 | ₹900 | ₹9.00 | ₹1.00 a reed |
| Pack of 500 | ₹4,500 | ₹9.00 | ₹1.00 a reed |
| Size | Price | Per unit | 120 ml bottles at 25% |
|---|---|---|---|
| 100 g | ₹325 | ₹3.25 / g | Built by weight — no density published |
| 500 ML | ₹1,099 | ₹2.198 / ml | 5.56 |
| Size | Price | Per gram | 120 ml bottles at 25% (30 g) |
|---|---|---|---|
| 15 gm | ₹68.44 | ₹4.5627 | 0.5 |
| 50 gm | ₹212.40 | ₹4.248 | 1.67 |
| 100 gm | ₹354 | ₹3.54 | 3.33 |
| 500 gm | ₹1,652 | ₹3.304 | 16.67 |
| 1 kg | ₹3,068 | ₹3.068 | 33.33 — saves ₹236 against two 500 gm |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials, not finished diffusers. There is no statement on this page about how a DPM-type carrier wicks, because CSI does not list DPM, DPG, CCT, perfumer's alcohol or any individual solvent, and a supplier of five finished bases has no business characterising somebody else's carrier. There is also no reed diameter here, no pore size and no wicking rate — not because they are withheld but because neither fibre reed page publishes them. We would sell more reeds by printing a specification. What we have printed instead is the soak-and-weigh that produces your own.
Every price and stock figure here comes from live CSI data in October 2026 and links to the product page, where current pricing always takes precedence. Specifications are quoted only where a page publishes them: 20.3 cm, "uniform pore structure — no swelling, no clogging, no splitting", "consistent diffusion from day 1 to day 30", 6–8 reeds for a 50–100 ml bottle, "use 10+ for maximum throw in larger rooms — the base will evaporate faster at higher reed counts" and "avoid placing in direct sunlight or near heat sources which accelerate evaporation" on the fibre reed pages; the 10–30% blend window, 25–30% working ratio and 24–48 hour rest on the five base pages; "performs well in Indian climates by balancing scent throw with longevity" on Pure Performance. No CSI page publishes a reed diameter, pore size, fibre count or wicking rate, no density for any base or oil, and no temperature, evaporation rate, shelf life or heat-stability statement for anything in the range — and none is stated, estimated or implied here. Fragrance loads are formulation windows, not safety limits.
For MSDS or IFRA documentation, bulk pricing, GST invoicing or help reading a soak-and-weigh log, message us on WhatsApp at +91 7397976926. Documentation is sent as issued and is never summarised. Compliance and labelling belong with a qualified adviser in your market.
Frequently asked questions
- Comparing reed diameters and quantities when no diameter is published
- Eight reeds and liquid disappearing: should I reduce the reed count?
- Comparing wicking and evaporation between two reed types
- Cloudy after mixing: is the formula physically compatible?
- A 30-day test: weight loss, intensity, reed condition, room temperature
- The plain-base blank: separating the oil's contribution from the carrier's
- How many fibre reeds for a 100 ml bottle?
Customer reviews: The ten reviews above are genuine, published Judge.me reviews left by CSI customers on their product pages, unedited. There are no published reviews for either fibre reed listing, and the fragrance-oil reviews are candle observations rather than diffuser observations.
Figures verified October 2026. Reeds: black ₹236 / 25 = ₹9.44 a reed, ₹400 / 50 = ₹8.00, ₹800 / 100 = ₹8.00, ₹4,000 / 500 = ₹8.00 (stock 73 / 93 / 95 / 100); white ₹265 / 25 = ₹10.60, ₹450 / 50 = ₹9.00, ₹900 / 100 = ₹9.00, ₹4,500 / 500 = ₹9.00 (87 / 97 / 97 / 100). White premium ₹10.60 − ₹9.44 = ₹1.16 a reed at the 25-pack and exactly ₹1.00 above it. Bundles: black 6 = ₹48.00, 8 = ₹64.00, 10 = ₹80.00; white 6 = ₹54.00, 8 = ₹72.00, 10 = ₹90.00; at the 25-pack rate a bundle of eight is ₹75.52 black and ₹84.80 white. At scale, 1,000 bottles × 8 reeds = 8,000 reeds = ₹64,000 black against ₹72,000 white, a difference of ₹8,000. Hardware per bottle: ₹106.20 + ₹64.00 = ₹170.20 at 120 ml with eight black reeds; ₹82.60 + ₹48.00 = ₹130.60 at 50 ml with six. Bases: Pure Performance 100 g ₹325 = ₹3.25/g (63) and 500 ML ₹1,099 = ₹2.198/ml (56), so 90 ml for a 120 ml bottle at the published 25% ratio = ₹197.82 and 500 ÷ 90 = 5.56 bottles a pack; Depth ₹1,099 (982); Lift ₹1,099 (66); Softness ₹1,099 (98); Longevity ₹1,296 = ₹2.592/ml (40). Oil: Eucalyptus Spearmint ₹68.44 / 15 gm, ₹212.40 / 50 gm, ₹354 / 100 gm, ₹1,652 / 500 gm, ₹3,068 / 1 kg = ₹4.5627 / ₹4.248 / ₹3.54 / ₹3.304 / ₹3.068 a gram, with the kilo ₹236 below two 500 gm packs; 30 g for a 120 ml bottle at 25% = ₹106.20 at the 100 gm rung and ₹92.04 at the kilo; its kilo rate of ₹3.068 a gram is below the base's ₹3.25 a gram. Published specifications quoted verbatim: 20.3 cm, "uniform pore structure — no swelling, no clogging, no splitting", "consistent diffusion from day 1 to day 30", 6–8 reeds for a 50–100 ml bottle, "use 10+ for maximum throw in larger rooms — the base will evaporate faster at higher reed counts" and "avoid placing in direct sunlight or near heat sources which accelerate evaporation" (fibre reed pages); "Blend with 10-30% fragrance oil", 25–30% working ratio and a 24–48 hour rest before bottling (base pages); "performs well in Indian climates by balancing scent throw with longevity" (Pure Performance). No reed diameter, pore size, fibre count or wicking rate is published; no density is published for any base or oil; no temperature, evaporation rate, shelf life or heat-stability statement is published for anything in the range. CSI lists no DPM, DPG, CCT, perfumer's alcohol or individual solvents, and no rattan reed. The 3.2 g dry / 7.6 g wet / 0.55 g per reed figures are an illustration of the division and are not measurements of any product. Both Pack-of-500 reed variants show exactly 100 units, which looks like placeholder inventory; no depth claim is built on it. Stock counts are live at the date above and are not commitments; the linked product pages are authoritative.