I Made a Reed Diffuser With 30% Fragrance Oil, but It Becomes Cloudy During Temperature Cycling — Should I Change the Oil or Base?
शेयर करना
I Made a Reed Diffuser With 30% Fragrance Oil, but It Becomes Cloudy During Temperature Cycling — Should I Change the Oil or Base?
Oil or base, then? Unknowable in advance. No CSI page publishes a solubility figure, a cloud point or a compatibility list for any oil or base, and this page will not guess one for your pairing. What settles it is three pairs of bottles: your formula, the same formula with one oil changed, the same formula with the base changed.
Why pairs? Because "it went cloudy" needs something to be cloudy against. Each pair is split the moment it is stirred — one bottle into your cycle, one into the coolest cupboard you have. The cool-stored twin from the same batch is the instrument.
What does a cycling result prove? That something changed, or that nothing did. A cycle screens for change; it never establishes product life. Every temperature and every duration in your cycle is your choice, recorded as your choice, and none of it converts into days in a customer's home.
30% is the ceiling of the window, not past it
The first thing to fix is the framing, because it changes which remedies are on the table. You are not over-loading the blend. The published guidance on all five listed bases is "Blend with 10-30% fragrance oil", with a 25–30% working ratio named separately and a 24–48 hour rest before bottling. At 30% you are sitting exactly on the stated ceiling. That is a legitimate formulation and it is also, by definition, the least forgiving end of the range: every variable you have — the oil's composition, the base's capacity to carry it, the temperature it sees in a courier van — has less headroom than it would at 20%.
So "drop the load" belongs in your list of remedies, but as a formulation choice rather than a correction. And it has a price attached, which is worth knowing before you make it, because the arithmetic runs in two directions at once: less oil is cheaper, more base is dearer, and the net depends on which costs more per unit. Here is the whole picture on a 120 ml bottle using an oil that is flat-priced across its ladder, so the arithmetic stays readable.
| Load | Base | Oil | Carrier cost | Oil cost | Liquid per bottle | Against 30% |
|---|---|---|---|---|---|---|
| 30% — the ceiling | 84 ml | 36 g | ₹184.63 | ₹170.77 | ₹355.40 | — |
| 25% — working ratio | 90 ml | 30 g | ₹197.82 | ₹142.31 | ₹340.13 | ₹15.27 cheaper |
| 20% | 96 ml | 24 g | ₹211.01 | ₹113.85 | ₹324.86 | ₹30.54 cheaper |
| 15% | 102 ml | 18 g | ₹224.20 | ₹85.38 | ₹309.58 | ₹45.82 cheaper |
| 10% — the floor | 108 ml | 12 g | ₹237.38 | ₹56.92 | ₹294.30 | ₹61.10 cheaper |
Notice the direction of that table, because it contains a general rule worth holding on to. Cost per bottle is linear in the load, which means the cheapest blend is always at one end of the published window and never in the middle. Whether the cheap end is 10% or 30% depends on one comparison: whether your oil costs more or less per gram than your base. Apple Cinnamon at ₹4.7436 a gram is dearer than the base, so lowering the load lowers cost. An oil priced below the base — Eucalyptus Spearmint's kilo at ₹3.068 a gram, for example, against the base's ₹3.25 a gram — flips it, and a higher load would be cheaper. Work it out for your own oil rather than assuming less oil is always cheaper.
Two more pieces of published context, both of which belong in your decision and neither of which is a measurement. Depth is the one base in the range whose page says it "stabilises tricky sweet and spicy fragrance oils" and "slows evaporation" — CSI's own words, with no figure behind them, which makes Depth a reasonable candidate for your base-swap arm if your oil is a sweet or spicy accord. And Depth's page contradicts itself on load: its details table says 70–75% base with 25–30% oil while its dose cards mark 20% as "Recommended". We name that and leave it, because only the page owner can resolve it — but if you are formulating at the ceiling on Depth, it is worth knowing that the page itself points lower.
Three pairs, six bottles, one variable each
The structure matters more than the cycle. One bottle in a hot cupboard tells you almost nothing, because you have no way of knowing what the same liquid would have looked like if it had stayed cool — and your memory of how it looked on day 0 is not evidence. Pairing fixes that, and three pairs fix the attribution question as well.
| Bottle | Contents | Where it lives | The question its pair answers |
|---|---|---|---|
| H1 | Your oil, your base, 30% | Your cycle | Did the cycle change this blend at all, or was it always like this? |
| C1 | Same batch as H1 | Coolest cupboard, capped | |
| H2 | Candidate oil, your base, 30% | Your cycle | Is the oil the half that stops being held when the temperature moves? |
| C2 | Same batch as H2 | Coolest cupboard, capped | |
| H3 | Your oil, candidate base, 30% | Your cycle | Is the base the half that stops holding the oil at this load? |
| C3 | Same batch as H3 | Coolest cupboard, capped |
Two design decisions in that table are deliberate and worth defending. The first is that no reeds go into any of these bottles. Reeds pull liquid out, which concentrates what is left, which changes the ratio you are trying to test — so a reeded bottle is answering a different question. Weighed consumption with reeds is a separate trial with its own bottles, and it belongs to the posts that own it. The second is that both halves of each pair are capped. An open bottle loses carrier, and a blend that has lost carrier is not the blend you made.
Your cycle, your numbers — and what it cannot prove
Here is where this page has to be careful, and where most writing on the subject is not. CSI publishes no temperature of any kind — not a storage temperature, not a working temperature, not a flash point used as one, not a heat-stability statement, for any base, oil, reed or bottle. So there is no CSI cycle to follow and no "standard" to borrow. Every temperature and every duration in your protocol is your own choice, and the single most important thing you do is write it down as such.
What you can say qualitatively is ordinary physical behaviour: warmer air and moving air both carry more away from an exposed surface, which is why the fibre reed pages tell you to "avoid placing in direct sunlight or near heat sources which accelerate evaporation". That sentence is published and quotable. What cannot be written anywhere in your documentation is a rate, a percentage, a multiplier or a per-degree figure — because none exists for these materials, and inventing one would make everything downstream of it fiction.
| Column | What goes in it | Why it is there | Whose number is it |
|---|---|---|---|
| Pass number | 1, 2, 3… | Change often appears at a specific pass, not gradually | Yours |
| Hot-leg temperature | The figure your thermometer read, not the one you intended | An intended temperature is not a measurement | Yours — no CSI page states one |
| Hot-leg duration | Hours at that temperature | Duration and temperature are not interchangeable | Yours |
| Cool-leg temperature and duration | Where it went and for how long | Cycling is two legs; a hot soak is not a cycle | Yours |
| Appearance, warm | Clear / faint haze / haze / ring / separated layer / sediment | Warm haze and persistent haze are different findings | Yours, with a photograph attached |
| Appearance, settled one hour at room temperature | Same vocabulary | This is the column that matters for a shipped product | Yours, with a photograph attached |
| Control's appearance, same day | Same vocabulary, same photograph discipline | Without it, the hot bottle's appearance means nothing | Yours |
| Anything else that changed | Colour, odour, a film at the neck, a drop in level | Cycling screens for change of any kind, not only haze | Yours |
And now the boundary, stated as plainly as it can be. A short run at an elevated temperature is a screening tool for change — cloudiness, separation, colour, odour drift, sediment — and it is never evidence that a finished product will perform for a given number of days in a customer's home. There is no multiplier that converts a week in a warm cupboard into a season on a shelf, and anyone offering you one is offering arithmetic without a basis. Your cycle's job is to catch a formula that falls apart. Life claims come from full-life testing on more than one unit, published as a conservative figure or a range with the assumptions named — room, season, airflow, reed count — and validated per fragrance rather than once across a collection.
The four remedies, costed per bottle
Whatever the pairs show, your options are a short list. Three of them are formulation changes and one of them is free. Here they are with the money attached, on a 120 ml bottle at listed prices, so that the decision is made on cost and evidence rather than on instinct.
| Remedy | Cost per bottle against 30% | What it requires | What it risks |
|---|---|---|---|
| Rest the full 48 hours | ₹0 | Patience, and a photograph after the rest rather than during it | Nothing. Do this before anything else |
| Step down to 25% inside the window | ₹15.27 cheaper | A re-pour, and a fresh throw check — less oil is less fragrance | Throw. A clearer bottle nobody can smell is not a fix |
| Swap the oil, hold 30% | Depends on the oil: a 100 gm pack from ₹300 | A new sample pack and a full re-qualification of the formula | You are qualifying a new product, not adjusting one |
| Swap the base, hold 30% and the oil | ₹0 on Depth or Pure Performance; ₹33.10 more on Longevity | ₹325 for a 100 g trial or ₹1,099 for 500 ml, plus a new 24–48 hour rest | Depth's page lists fresh citrus, light florals and aquatics under Avoid |
Two of those four rows deserve a closer look. The base swap is remarkable precisely because it is free: Depth costs exactly the same per millilitre as Pure Performance, so moving to the one base whose page claims to stabilise sweet and spicy oils adds nothing to your bill of materials. The only base in the range carrying a premium is Longevity, and the premium is small and exact. "Buy a better base" is not a budget conversation in this catalogue — it is a suitability conversation, which is a much easier one to have.
The 25% step is the one with a hidden cost. Less oil in the bottle is less fragrance in the room, so a load reduction that clears your haze may hand you a throw complaint instead — and a bottle that looks perfect and smells of nothing is a worse product than a slightly hazy one that sells. If you take the step down, re-run your throw check at the new load before you decide it worked. The load question in its own right, including what a percentage point is worth in both directions, is handled in the concentration post.
The build is cheap because most of it is already in your workshop. Six 120 ml bottles are ₹637.20 out of the ₹1,062 pack of ten. Your current base and oil cover four of the six bottles at ₹0 incremental. The oil-swap pair needs 72 g of a candidate — ₹216.00 of a ₹300 Citrus Lemon 100 gm pack, or ₹341.54 of a ₹474.36 Apple Cinnamon pack if a sweet-spicy arm suits your range better. The base-swap pair needs either Pure Performance's ₹325 100 g pack, built by weight, or 168 ml of Depth at ₹369.26 out of a ₹1,099 pack. And no reeds at all, because this is a clarity trial. Cheapest full six-bottle build: ₹1,262.20.
One piece of pack arithmetic is worth flagging because it bites at exactly this bottle size. If you ever decide to run all six bottles on a single new base at 120 ml and 30%, you need 6 × 84 = 504 ml of it — and 500 ml is the largest base pack listed, so a six-bottle trial at this size is a two-pack trial by four millilitres. Run the same trial in 50 ml bottles instead and it needs 6 × 35 = 210 ml, which fits one pack with 290 ml to spare, and the glass drops from ₹637.20 to ₹495.60. For a clarity test, where reeds are not involved and the bottle is only a window, the 50 ml format is the better buy — and it is the size the reeds' published 6–8 reed band covers, if the same bottles later go into a consumption trial.
Reading the pairs
Six bottles produce a small number of patterns, and each pattern licenses a specific sentence and forbids several others. This table is the whole output of the trial.
| Pattern | What you may write in the batch file | What you may not conclude | Next step |
|---|---|---|---|
| H1 hazy, C1 clear; H2 clear; H3 hazy | "With my base held constant, the candidate oil stayed clear through my cycle where my current oil did not" | That your oil is "unstable" or that the candidate is "heat stable" | Re-run the oil arm on a second batch, then qualify the candidate properly |
| H1 hazy, C1 clear; H3 clear; H2 hazy | "With my oil held constant, the candidate base stayed clear where mine did not" | A solubility figure, a ranking of bases, or a general claim about the base | Price the base swap — ₹0 on Depth or Pure Performance — and re-rest 24–48 hours |
| All three hot bottles hazy, all three controls clear | "My cycle produces haze at 30% across all three arms" | That 30% is "too high" — it is the published ceiling | Step down to 25% inside the window, re-pour, re-rest, re-photograph, re-check throw |
| Haze appears warm and clears on cooling | "Haze was present at temperature and reversed within an hour at room temperature" | That the product is unaffected — a customer may see it in a courier van | Decide whether a reversible appearance change is acceptable for your packaging and route |
| Controls hazy too | "The blend was not clear to begin with, independent of my cycle" | Anything about temperature at all | Go back to the rest and the blending method before the cycle |
| Nothing changed anywhere | "Six bottles, my cycle, no appearance change observed" | That the formula is stable in a warehouse or over a shelf life | Keep the photographs, harden the cycle, and run a real-time trial for life questions |
The fourth row is the one that produces the most argument inside a business, and it is worth deciding your position on it in advance rather than in the middle of a complaint. A haze that appears at temperature and clears an hour later is, strictly, a reversible physical change — and it is also exactly what a customer sees when a box has spent an afternoon in a delivery van in May. Whether that is acceptable is a commercial decision about your packaging, your route and your customer, not a technical one, and no supplier can make it for you. What you can do is record it honestly, in the same vocabulary every time, with photographs attached.
The last row is also worth sitting with. "Nothing changed" is a real result and a good one — but it is bounded by the cycle you chose and by the two bottles per arm you ran. It does not become a shelf-life statement, and if a hotel or marketplace buyer asks for one, the honest answer is a description of what you tested and what you observed, not an extrapolation. The claims discipline for that conversation is the same one the whole series carries: test full-life, test more than one unit, publish a conservative figure or a range, state the assumptions, and validate per fragrance before advertising one range across a collection.
What to buy, and at which rung
Four items. Two bases for the swap arm, one oil for the oil arm, and the glass that makes the pairs possible. Nothing here is bought on a stability claim, because no stability claim exists in this range to buy on.
| Variant | Price | Per bottle | Six bottles |
|---|---|---|---|
| 50 ML Pack of 10 | ₹826 | ₹82.60 | ₹495.60 |
| 120 ML Pack of 10 | ₹1,062 | ₹106.20 | ₹637.20 |
| Size | Price | Per unit | Carrier per 120 ml at 30% |
|---|---|---|---|
| 100 g | ₹325 | ₹3.25 / g | Built by weight — no density published |
| 500 ML | ₹1,099 | ₹2.198 / ml | ₹184.63 for 84 ml |
| Size | Price | Per ml | Two-bottle arm at 120 ml, 30% |
|---|---|---|---|
| 500 ml | ₹1,099 | ₹2.198 | 168 ml = ₹369.26 allocated |
| Size | Price | Per gram | 120 ml bottles at 30% (36 g) |
|---|---|---|---|
| 15 gm | ₹93.22 | ₹6.2147 | 0.42 |
| 50 gm | ₹237.18 | ₹4.7436 | 1.39 |
| 100 gm | ₹474.36 | ₹4.7436 | 2.78 — covers H2 and C2 |
| 500 gm | ₹2,371.80 | ₹4.7436 | 13.89 |
| 1 kg | ₹4,743.60 | ₹4.7436 | 27.78 — saves ₹0 against two 500 gm |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials, not finished diffusers. There is no prediction anywhere on this page about whether your oil or your base is responsible for your haze, and that is deliberate. No CSI page publishes a solubility figure, a cloud point, a compatibility list, a viscosity, a density or a temperature for any oil or base in the range, so a confident answer would have to be invented — and an invented answer would send you to buy the wrong thing. What we can do is tell you that 30% is the published ceiling rather than an error, give you the paired protocol that attributes the change, and price every remedy at live rungs.
Every price and stock figure here comes from live CSI data in October 2026 and links to the product page, where current pricing always takes precedence. Specifications are quoted only where a page publishes them: "Blend with 10-30% fragrance oil", the 25–30% working ratio and the 24–48 hour rest before bottling on all five base pages; "performs well in Indian climates by balancing scent throw with longevity" on Pure Performance; "slows evaporation" and "stabilises tricky sweet and spicy fragrance oils" on Depth, which also lists "Fresh citrus, light florals, aquatics" under Avoid and marks 20% as "Recommended" in its dose cards against 25–30% in its details table; "avoid placing in direct sunlight or near heat sources which accelerate evaporation" on the fibre reed pages. Every temperature and duration in a cycling protocol is the reader's own choice, and no CSI page states a storage temperature, a working temperature, a heat-stability statement or a shelf life for anything in the range. Fragrance loads are formulation windows, not safety limits.
For MSDS or IFRA documentation, bulk pricing, GST invoicing or help reading a cycle log, message us on WhatsApp at +91 7397976926. Documentation is sent as issued and is never summarised. Compliance and labelling decisions belong with a qualified adviser in your market.
Frequently asked questions
- Cloudy after mixing: is the formula physically compatible?
- Could a different concentration improve summer performance?
- Screening samples for heat-related changes: the coded protocol
- Comparing bases on evaporation and throw at higher temperatures
- A reed diffuser QC checklist: clarity, strength, reeds, leakage, packaging
- Testing a new base supplier before replacing the one in your bestseller
- Customers report shorter life in summer: which controlled tests?
Customer reviews: The ten reviews above are genuine, published Judge.me reviews left by CSI customers on their product pages. Names, star ratings, dates and products are as recorded by Judge.me; wording is unedited. They are candle observations and none of them is evidence about clarity in a diffuser blend.
Figures verified October 2026. A 120 ml bottle at the published 30% ceiling is 84 ml of base and 36 g of oil; at 25% it is 90 ml and 30 g. Carrier cost = millilitres × ₹2.198 (₹1,099 ÷ 500 ml): ₹184.63 at 30%, ₹197.82 at 25%, ₹211.01 at 20%, ₹224.20 at 15%, ₹237.38 at 10%. Oil cost at Apple Cinnamon's flat ₹4.7436 a gram: ₹170.77 for 36 g, ₹142.31 for 30 g, ₹113.85 for 24 g, ₹85.38 for 18 g, ₹56.92 for 12 g. Liquid per bottle ₹355.40 at 30% and ₹340.13 at 25%, a difference of ₹15.27 (₹28.46 saved on oil less ₹13.19 added in base). Longevity's premium is ₹0.394 a millilitre, so 84 × ₹0.394 = ₹33.10 on a 120 ml bottle at 30%. Glass: 120 ML Pack of 10 ₹1,062 = ₹106.20 a bottle, so six = ₹637.20; 50 ML Pack of 10 ₹826 = ₹82.60, six = ₹495.60; live stock 24 and 16 packs = 240 and 160 bottles. Six bottles at 120 ml and 30% need 6 × 84 = 504 ml of base against a largest listed pack of 500 ml; at 50 ml they need 6 × 35 = 210 ml. Cheapest six-bottle build = ₹637.20 glass + ₹300 Citrus Lemon 100 gm + ₹325 Pure Performance 100 g = ₹1,262.20. Bases: Pure Performance 100 g ₹325 = ₹3.25/g (63) and 500 ML ₹1,099 = ₹2.198/ml (56); Depth ₹1,099 (982); Lift ₹1,099 (66); Softness ₹1,099 (98); Longevity ₹1,296 = ₹2.592/ml (40). Oils: Apple Cinnamon ₹93.22 / 15 gm then flat ₹4.7436 a gram at ₹237.18 / 50 gm, ₹474.36 / 100 gm (15 packs), ₹2,371.80 / 500 gm (5 packs) and ₹4,743.60 / 1 kg, kilo saving ₹0; Spicy Cinnamon ₹116 / ₹349 / ₹699 / ₹3,249 / ₹6,499 with a 50 g-to-100 g inversion (₹6.98 against ₹6.99 a gram) and a kilo ₹1 dearer than two 500 g packs; Citrus Lemon ₹300 / 100 gm = ₹3.00 a gram; Eucalyptus Spearmint's kilo is ₹3.068 a gram, below the base's ₹3.25 a gram, which is why a higher load is cheaper per kilogram of blend on some oils. No CSI page publishes a solubility figure, cloud point, compatibility list, viscosity, density, temperature, shelf life or heat-stability statement for any base, oil, reed or bottle, and none is stated, estimated or implied here. No outcome is predicted for any oil-and-base pairing. Published specifications quoted are taken verbatim from the five base pages and the two fibre reed pages. Stock counts are live at the date above and are not commitments; the linked product pages are authoritative.