I Am Making 100 Reed Diffusers with 20% Fragrance Oil — How Much Base Should I Buy After Accounting for Filling Losses and Density?
Share
How many 500 ml bottles is that? 8 at an example 1.00 g/ml, 8 at 0.95 g/ml. No density is published — weigh one bottle on arrival.
How do I measure filling loss? Weigh the vessel, stirrer and funnel before and after filling the first ten bottles, and the drip towel; loss = (lot − bottles − sample) ÷ lot.
What does the order cost? About ₹24,927.08 in CSI materials with 50 ml bottles and reeds. See the cart.
Your hundred bottles, and the base you are about to order
You have a formula at 20%, a stack of 100 small bottles and an order to place. The arithmetic everyone does first is: 100 bottles × 43 g each = 4,300 g of blend; 80% of that is base, 3,440 g; at roughly a gram per millilitre, that is 7 bottles of 500 ml. Order 7, and you can run out before the last bottles are filled — 33 g of base short at 1.00 g/ml, 208 g short if the base weighs 0.95 g/ml — — because liquid stays behind in the mixing vessel, on the stirrer, in the funnel and in the clarity sample, and because a 500 ml bottle of base holds 500 ml, not necessarily 500 g. This page puts numbers on both gaps, using your own bench to measure the first and your own scale to measure the second.
The example here is a hundred CSI Gold Reed Diffuser Bottle 50 mls — small gift-size diffusers — filled to 43 ml each. Why not 50 ml? Because the Gold bottle's page publishes no fill line, reeds displace liquid when they go in, and a brim-full bottle drips at the neck. 43 ml is this page's example; your fill is your choice, and turning a millilitre label into a gram fill shows how to fix it. Whatever you choose, the allowance method below is the same.
Two things to do today, before ordering, with what is on your bench. First, if you have any blend left from your trials, weigh one empty bottle, fill it to your line, weigh again — that is your fill in grams, and it already contains your blend's density. Second, look at the vessel and funnel you used for the trial: how much liquid clung to them? If you did not weigh it, the rehearsal section below measures it on the first ten of your hundred bottles, at no extra cost in liquid.
| Line | No allowances | Measured loss 1.5% (example) | Assumed loss 5% |
|---|---|---|---|
| Net blend in bottles | 4,300 g | 4,300 g | 4,300 g |
| + retained sample | — | 50 g | 50 g |
| ÷ (1 − loss) | — | 4,416 g | 4,579 g |
| Fragrance oil | 860 g | 883 g | 916 g |
| Base | 3,440 g | 3,533 g | 3,663 g |
| 500 ml base at 0.95 / 1.00 / 1.05 g/ml | 8 / 7 / 7 | 8 / 8 / 7 | 8 / 8 / 7 |
| Oil to buy (cheapest listed combination) | — | 1 × 500 g + 4 × 100 g | 1 × 500 g + 4 × 100 g + 1 × 50 g |
The middle column is what this page recommends you order from, once you have measured your loss. The right-hand column is what you order if you have not: the top of the commonly used 3–5% working range, labelled as an assumption. On this batch the difference is 130 g of base and 33 g of oil. Both happen to round to 8 bottles of base at the light density, so here the measurement mainly decides the oil — but the left-hand column shows what happens without any allowance: 7 bottles, 33 g short of the measured need even at 1.00 g/ml. Batches that sit near a bottle boundary are decided by the allowance. The general method for 100 bottles of 100 ml is in how much base for 100 bottles at 20%, and the 120 ml version with density and filling losses covers the bigger bottle; the business pillar carries the order into wholesale buying.
Where the missing grams go
Filling loss is not one thing. It is the sum of small amounts that stay behind at each step, and each can be measured with the scale you already own. CSI publishes no loss figures — none exist for your vessel and your hands — so the table below names the usual places, how to measure each, and whether the liquid is truly lost or can be recovered.
| Where | How to measure it | Lost or recoverable? | How to reduce it |
|---|---|---|---|
| Mixing vessel walls and base | Weigh the empty vessel before mixing and again after the last pour | Mostly lost — do not scrape into a production bottle | Pour slowly, let it drain a minute, use one vessel per batch |
| Stirrer, paddle or mixer head | Weigh it dry, then wet after stirring | Lost | A narrow glass rod or paddle holds less |
| Funnel or pouring jug | Weigh dry, then after the last bottle | Partly — drain it back into the vessel | One funnel per fragrance; tap it, wait, then move on |
| Drips on the bottle neck | Weigh a paper towel before and after wiping ten bottles | Lost | Fill to weight, not to the brim |
| Overfills poured back | Not a loss if poured back into the vessel | Recoverable | Fill on the scale; stop at the target |
| Clarity and retained samples | Planned — weigh them | Kept on purpose | Keep one sealed sample per batch |
| A dropped or chipped bottle | Count them | Lost bottle and fill | A spare pack of bottles is cheaper than a short batch |
In a small batch, the vessel is usually the biggest single loss, and it does not grow in proportion to the batch. A film on the walls of a vessel weighs roughly the same whether you mixed 1 kg or 5 kg in it, so loss as a percentage falls as batches grow. That is why a percentage measured on a 500 g trial overstates the loss on a 5 kg batch, and why the rehearsal below measures loss on your actual production vessel. If you have decided to mix your hundred bottles in two halves, measure the loss on the first half and you will know it exactly for the second. The scale-up hub covers the mixing side of a bigger vessel; this page is only about the grams.
Density: why a 500 ml bottle of base is not 500 g
CSI sells every diffuser base by volume — 500 ml bottles, plus a 100 g pack of Pure Performance Base — and publishes no density for any base or oil. Your formula is in grams. So the base you need in grams has to be turned into bottles of base by the base's own density, which you measure once: weigh a full, unopened 500 ml bottle, empty it into your vessel, weigh the empty bottle, subtract, and divide by 500. That number, not the example on this page, decides how many bottles to order next time.
For the first order, before you have measured, cover the light case. At an example 1.00 g/ml, 3,533 g of base is 3,533 ml — 8 bottles. At 0.95 g/ml it is 3,719 ml — 8 bottles. At 1.05 g/ml it is 3,365 ml — 7 bottles. Ordering 8 protects the batch; any base left over starts the next one. Note that the base's density and the blend's density are different numbers: the blend's density turns your fill volume into grams per bottle, the base's density turns base grams into base bottles. Calculating 20% by weight or volume explains why the load itself must be in grams.
| Option | Covers | Cost | Per gram of base |
|---|---|---|---|
| 36 × 100 g | 3,600 g | ₹11,700.00 | ₹3.25 |
| 8 × 500 ml | about 4,000 g at 1.00 g/ml | ₹8,792.00 | ₹2.20 at 1.00 g/ml · ₹2.31 at 0.95 |
The 500 ml bottle is cheaper per gram than the 100 g pack for any base heavier than 0.676 g per ml — that is ₹1,099.00 ÷ 500 ml ÷ ₹3.25 per gram. Liquids used as diffuser carriers are not commonly anywhere near that light, but the point is that the comparison needs a density, and you can make it exact once you have weighed a bottle. The 100 g pack is the right size for trials and for topping up a batch that came out a few grams short; it is not the right size for a hundred bottles.
The filling rehearsal: measure your loss on the first ten bottles
Mix a rehearsal lot of 480 g — enough for ten bottles and a retained sample — at 20% by weight, rest it as the base page asks (24–48 hours), and fill it in two arms of 5 bottles that differ in one thing only: the filling method. Arm A, the control, is how you filled your trial — say, pouring from the beaker. Arm B is the alternative you are considering — a small funnel, or a jug with a fine spout. Weigh everything before and after.
| Record | Arm A — control (your current method) | Arm B — the alternative | Why |
|---|---|---|---|
| Tool weight before / after | ___ / ___ g | ___ / ___ g | Cling on the tool |
| Vessel weight before / after | ___ / ___ g | ___ / ___ g | Cling in the vessel |
| Net fill of each bottle | 5 readings | 5 readings | Fill accuracy (spread) |
| Drips wiped (towel before / after) | ___ / ___ g | ___ / ___ g | Neck loss |
| Minutes for 5 bottles | ___ | ___ | Time matters at 100 |
| Loss % = (lot g − bottles g − sample g) ÷ lot g | ___% | ___% | The number you order with |
A worked example of the last line, using labelled example readings: if 9 g stayed on the beaker and stirrer after filling five bottles from a 240 g lot, the loss for that arm is 3.8%. Measure yours. Choose the arm with the lower loss and the tighter spread of fills, and use its loss figure in the stack above. Then — because these ten bottles are product — put 6 reeds into one bottle from each arm and weigh them on days 0, 1, 3 and 7 against a control bottle from your earlier trial, to confirm the rehearsal lot behaves like the formula you approved: same grams lost per day within your own stated tolerance, same blind score on your written house scale, clear at 48 hours and 7 days. Why hand-filled bottles vary in strength goes deeper on fill and mixing consistency.
| If a bottle loses | Days to empty | Days lost per 2 g underfill |
|---|---|---|
| 1.0 g per day | 43.0 | 2.0 |
| 1.5 g per day | 28.7 | 1.3 |
| 2.0 g per day | 21.5 | 1.0 |
| 2.5 g per day | 17.2 | 0.8 |
In a small bottle, a couple of grams of underfill is a noticeable share of the product's life — the right-hand column shows how many days two grams represents at each rate. That is why fill accuracy belongs in the same rehearsal as loss: a method that loses little but fills unevenly moves the problem from your margin to your customer's experience. CSI publishes no evaporation or longevity data for any base, oil or reed; the rates in the table are arithmetic for you to replace with your weighed figures. Estimating life from weight loss without waiting for the bottle to empty shows how to project it.
The priced cart for a hundred bottles
Priced with listed, in-stock CSI sizes for the measured-loss column, base sized for the light density case. If you have not run the rehearsal and want to buy for the assumed 5% instead, the CSI total is ₹25,103.49.
| Item | Need | Buy | Price | Left over |
|---|---|---|---|---|
| Pure Performance Base | 3,533 g | 8 × 500 ml | ₹8,792.00 | about 467 ml at 1.00 g/ml |
| Cucumber Green Tea | 883 g | 1 × 500 g + 4 × 100 g | ₹3,075.08 | 17 g |
| Gold Reed Diffuser Bottle 50 ml | 100 bottles | 10 × pack of 10 | ₹8,260.00 | 0 bottles |
| Fiber Diffuser Reeds (Black) | 600 reeds (6 per bottle) | 1 × pack of 500 + 1 × pack of 100 | ₹4,800.00 | 0 reeds |
| CSI materials | ₹24,927.08 |
The oil line is 1 × 500 g + 4 × 100 g — ₹3,075.08, the cheapest listed combination that covers 883 g, and slightly less than a single 1 kg pack at ₹3,327.60. Cucumber Green Tea costs ₹3.33 per gram at 500 g, ₹3.33 at 1 kg and ₹3.53 at 100 g, so for this quantity the 1 kg pack buys convenience and 117 g of spare oil, not a lower rate. On the listed catalogue most oils cost about the same per gram from 100 g upwards; the one reliable price step is from 15 g to 50 g or 100 g. The bottles come in packs of ten, so a dropped bottle means buying another pack — if your hands are new to filling, an eleventh pack is cheap insurance. Bases are listed only as 500 ml bottles (and Pure Performance also as 100 g); larger quantities are quoted on WhatsApp, with no published volume discount.
What the allowances cost per bottle
| Line | Quantity | Cost |
|---|---|---|
| Fragrance oil | 9 g | ₹28.62 |
| Base | 34 g | ₹75.61 |
| Share of filling loss (measured case) | 0.66 g | ₹1.61 |
| Gold bottle 50 ml | 1 | ₹82.60 |
| Black fibre reeds | 6 | ₹48.00 |
| CSI materials per diffuser | ₹236.43 |
The loss line is small — ₹1.61 a bottle at the measured 1.5%, ₹5.55 at the assumed 5% — next to the bottle at ₹82.60 and the reeds at ₹48.00. In a 50 ml product the glass and reeds dominate the cost; the liquid is the smaller part. That is worth knowing before you spend effort squeezing the last gram of base: reducing loss matters more for running short than for margin. The exact cost of a 120 ml bottle builds the full ledger for the larger bottle.
The decision rule
| If this is true | It means | Do this |
|---|---|---|
| You have not chosen a fill in ml | Grams per bottle are unknown | Buy nothing yet. Fix the fill — 8282 |
| You have not measured any loss | Your allowance is a guess | Buy for 5% (8 × 500 ml) or rehearse first |
| Rehearsal loss measured | You know your allowance | Buy for it: 8 × 500 ml at the light case |
| Base density weighed | You know your bottles | Recalculate; order exactly, with no density margin |
| One filling method loses less and fills tighter | Better method | Use it for all 100; record it on the SOP |
| Rehearsal bottles differ from the trial control | The lot or process changed | Stop. Diagnose before mixing the rest — 8288 |
The rule never asks you to over-buy to be safe, and never lets you order without a fill. Once you have a measured loss and a weighed density for your base, the second order is pure arithmetic and the allowance can shrink to the measured figure. If your order is growing towards monthly volumes, whether to buy 1 kg, 5 kg or 25 kg of base and 25 kg versus 5 kg at a time take over.
The CSI products in this order
| Size | Price | Per unit | Stock (15 Oct 2026) |
|---|---|---|---|
| 100 g | ₹325.00 | ₹3.25 per g | In stock |
| 500 ml | ₹1,099.00 | ₹2.20 per ml · ₹2.20 per g at an example 1.00 g/ml | In stock |
| CSI HyperDiffusion Base™ (different product) | ₹1,499.00 | — | Out of stock — not offered |
| Pack | Price | Per gram | Bottles at 8.6 g oil |
|---|---|---|---|
| 15 g | ₹93.22 | ₹6.21 | 1.7 |
| 50 g | ₹176.41 | ₹3.53 | 5.8 |
| 100 g | ₹352.82 | ₹3.53 | 11.6 |
| 500 g | ₹1,663.80 | ₹3.33 | 58.1 |
| 1 kg | ₹3,327.60 | ₹3.33 | 116.3 |
| Variant | Price | Per bottle | Stock (15 Oct 2026) |
|---|---|---|---|
| 50 ml · pack of 10 | ₹826.00 | ₹82.60 | In stock |
| 120 ml · pack of 10 | ₹1,062.00 | ₹106.20 | In stock |
| Pack | Price | Per reed | Bottles covered |
|---|---|---|---|
| Pack of 25 | ₹236.00 | ₹9.44 | 4 bottles at 6 reeds |
| Pack of 50 | ₹400.00 | ₹8.00 | 8 bottles at 6 reeds |
| Pack of 100 | ₹800.00 | ₹8.00 | 16 bottles at 6 reeds |
| Pack of 500 | ₹4,000.00 | ₹8.00 | 83 bottles at 6 reeds |
| Item | Price | Note |
|---|---|---|
| Weighing Scale | ₹354.00 | Resolution not published — check the display steps |
| Silicon Measuring Beaker 250 ml | ₹600.00 | For batches above about 100 g |
| Silicon Measuring Beaker 100 ml | ₹300.00 | Mixing vessel; weigh, do not measure by its marks |
| CSI Pro Mixer (cordless handheld) | ₹349.00 | Optional; a clean glass rod or spoon also works |
Where to go from here
This page belongs to the scaling-up section. For the conversion from a millilitre label to a gram fill, see fifty 120 ml bottles by weight; for the order-size decision, 1 kg, 5 kg or 25 kg; for bottles that come out different from one another, mixing and filling consistency. The section capstone pulls it into a commercial product.
CANDLEMAKINGSUPPLIESINDIA supplies raw materials, not finished diffusers. The easy answer is "add 10% and order plenty". This page tells you to measure your loss on the first ten bottles and buy for that, shows exactly what an untested allowance over-buys, and says plainly that we publish no density, shelf life, evaporation or longevity data for any base or oil.
Diffuser bases, fibre reeds, Gold bottles, beakers, scale and mixer are CSI live pricing, re-checked 15 October 2026. Fragrance oils are CSI live pricing, pulled 24 September 2026, stock re-checked 14 October 2026. Every gram split, ml-to-g conversion, per-bottle cost and kit total on this page is computed and shown to two decimals so you can check it; densities are labelled examples, never CSI specifications.
Bottle counts per arm, clarity checkpoints, weighing schedules, room-scoring scales and loss allowances are labelled working practices, not industry standards — none exists for reed diffuser performance. The 43 ml fill, the 1.00 g/ml blend and 1.00 g/ml base densities with ±5%, the 50 g retained sample, the 1.5% measured and 5% assumed losses and the 9 g cling reading are labelled examples you replace. For help building a test kit, bulk quotes, GST invoicing, MSDS or IFRA documents, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Successfully Made a 100 g Reed Diffuser Trial Batch — How Do I Scale the Formula to 5 kg Without Changing Fragrance Strength or Clarity?
- I Want to Make 50 Reed Diffusers of 120 ml Each — How Do I Calculate Base and Fragrance Quantities by Weight When My Bottles Are Labelled by Volume?
- I Have Finalised My Lavender Reed Diffuser Formula — Should I Buy 1 kg, 5 kg or 25 kg of Base for My First Commercial Production Run?
- I Made 20 Reed Diffusers by Hand, but the Fragrance Strength Varies Between Bottles — How Do I Improve Mixing and Filling Consistency?
- I Want to Make 500 Reed Diffusers for Diwali Gifting — How Do I Plan the Base, Fragrance Oil, Fibre Reeds, Bottles and Packaging Quantities?
- I Made a Reed Diffuser Formula with 22% Fragrance Oil — How Do I Calculate the Exact Raw-Material Cost of a 120 ml Bottle?
- I Am Making 1,000 Reed Diffusers per Month — How Do I Decide Whether Buying Base in 25 kg Quantities Is More Economical than Buying 5 kg at a Time?
- I Want to Turn My Successful Homemade Reed Diffuser Formula into a Commercial Product — How Do I Finalise the Base, Fragrance Percentage, Fibre Reeds, Stability Testing, Costing and Wholesale Raw-Material Purchase?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Eco Candle Wicks, Premium Candle Wicking Needle and Bamboo Wick Holder. They are general product reviews, not assessments of the guidance set out here. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on the three reviews Judge.me recorded as verified — Monika Deep, Subhankar Roy and Sneha Tamang; the reviews from Ashwini, LJ and Lalitha Jagan are published but not recorded as verified, and carry no badge.
Figures re-checked 15 October 2026 and pulled 24 September 2026: Diffuser bases, reeds, bottles and tools — CSI live pricing, re-checked 15 October 2026: Pure Performance Base ₹325.00 / 100 g, ₹1,099.00 / 500 ml; Longevity Base ₹1,296.00 / 500 ml; Lift Base ₹1,099.00 / 500 ml; Depth Base ₹1,099.00 / 500 ml; Softness Base ₹1,099.00 / 500 ml; CSI HyperDiffusion Base™ ₹1,499.00 (out of stock); Fiber Diffuser Reeds (Black) ₹236.00 / 25, ₹400.00 / 50, ₹800.00 / 100, ₹4,000.00 / 500; Fiber Diffuser Reeds (White) ₹265.00 / 25, ₹450.00 / 50, ₹900.00 / 100, ₹4,500.00 / 500 (both 20.3 cm long); Gold Reed Diffuser Bottle 50 ml ₹826.00 / pack of 10, 120 ml ₹1,062.00 / pack of 10; Weighing Scale ₹354.00; Silicon Measuring Beaker 100 ml ₹300.00, 250 ml ₹600.00; CSI Pro Mixer ₹349.00. Fragrance oils — CSI live pricing, pulled 24 September 2026, stock re-checked 14 October 2026: Cucumber Green Tea Fragrance Oil ₹93.22 / 15 g, ₹176.41 / 50 g, ₹352.82 / 100 g, ₹1,663.80 / 500 g, ₹3,327.60 / 1 kg.
Non-price figures and assumptions: Fragrance load is a share of the total blend by weight (oil g = blend g × L; base g = blend g × (1 − L)). No density is published for any CSI base or oil: every ml-to-g conversion uses a labelled example density and shows ±5%; weigh 100 ml of your own blend to get yours. 100 × 43 ml fills at an example 1.00 g/ml (43 g each). Allowances: 50 g retained sample; loss 1.5% (example measured) or 5% (untested assumption, top of the commonly used 3–5%), applied as (net + sample) ÷ (1 − loss). Base bottles at example base densities 0.95/1.00/1.05 g/ml. Rehearsal: 5 + 5 bottles, example cling reading 9 g. Per-bottle cost uses Cucumber Green Tea at the 1 kg rate and Pure Performance 500 ml at the example density. What CSI's base pages state (quoted as claims to test, not CSI test results): every base is a "Professional … Reed & Car Diffuser Base", crystal clear per its page, used at 10–30% fragrance of the total blend with a 24–48 hour rest before bottling. Pure Performance — neutral, "no added fixatives, no complex enhancements", for all families, "start at 10% … up to a maximum of 30%", "20% recommended", a "typical working blend 75% base + 25% fragrance", the example "for a 100 ml finished diffuser at 25%: 75 ml base + 25 ml fragrance oil", and "flip reeds after the first hour". Longevity — oriental/amber, woody, resinous/balsamic, spicy and gourmand; "avoid light florals, fresh citrus, aquatics — use Lift Base"; slower "cold diffusion"; "if clouding occurs, reduce fragrance percentage and retest"; "allow 2–3 hours before the first flip". Lift — floral, citrus, green and fruity. Depth — chypre, leather, smoky and rich gourmand; "stabilises tricky sweet and spicy fragrance oils". Softness — soft florals, powdery/musky, light gourmand. Reed page — 20.3 cm long; "for a standard 50–100 ml diffuser bottle, 6–8 reeds gives a good balance". Bottle page — variants 50 ml and 120 ml (its text says "50 and 100ml"); neck diameter, fill line and any reducer are not stated. CSI publishes no composition, density, viscosity, evaporation rate, flash point or shelf life for any diffuser base; no throw, evaporation or longevity result for any base, oil or reed; no reed diameter; no bottle neck size or fill line; no IFRA percentage for any oil; and no bulk base price. The five bases are told apart only by what their pages say they are for — never by a measured result. IFRA: reed diffusers are listed under Category 10A in current IFRA amendments as commonly summarised in suppliers' guides; read the Category 10A limit on the certificate for your oil, which CSI provides on WhatsApp request. Material costs exclude labour, packaging, freight and GST. Diwali 2026 falls on Sunday 8 November, 24 days after this page was written on 15 October 2026.