I Am Making Leather Car Perfume Sprays — How Do I Test Fragrance Oil Compatibility With Plastic Bottles, Spray Pumps and Car Interior Surfaces?

I Am Making Leather Car Perfume Sprays — How Do I Test Fragrance Oil Compatibility With Plastic Bottles, Spray Pumps and Car Interior Surfaces?

 

8ml glass spray bottle ₹120 for 5 · ₹24.00 each Room & Linen Spray Base ₹999 for 500 g · ₹1.998/g Stocked in India · ships nationwide
CSI purchasing guides · car perfume sprays
Nobody publishes a compatibility table for your bottle, your pump and your customer's dashboard. Twenty filled bottles and thirty days will tell you more than any supplier can.
★★★★★
"I just tried it out , it's absolutely stunning. Super easy to use and such a life saver."
ThenirvaofficialVerified buyer · Mar 2026
Room & Linen Spray Base
★★★★★
"Good quality wood fragrance oil with a warm, long-lasting scent and strong performance in candles."
Payal PatelVerified buyer · Mar 2026
Woody Oud Fragrance Oil
★★★★★
"Nice product"
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base for Reed & Candle
★★★★★
"Thankyou so much candle supplier M happy with the smell of dark vanilla M obsessed with the vanilla fragrance💕 I ll definitely shop again☺️"
SUMAN BISHTJul 2025
Dark Vanilla Oud
★★★★★
"The jars were of good quality"
Soumili GopeVerified buyer · Mar 2026
Clear Glass Jar with Golden Lid
★★★★★
"Nice glass jars, they look cute. I like the packaging as well."
AshwiniSep 2025
Matte glass candle jars
★★★★★
"Fresh and soothing"
Yashvi ShahVerified buyer · Jul 2025
Blue Ocean Fragrance Oil
★★★★★
"Quality is good with good fragrance"
Avanthi CheeliVerified buyer · Nov 2025
Citrus Lemon Fragrance Oil
★★★★★
"all the materials are high quality and ultimate fragrance range"
Arminder KaurVerified buyer · Mar 2026
Coconut Soy CSI 468
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. Wording is unedited.
✓ Load figures quoted only from the page that publishes them ✓ Two spray bottles in the range, both glass ✓ Bulk pricing & GST invoicing on WhatsApp
Car Perfume Guides · Spray Compatibility

I Am Making Leather Car Perfume Sprays — How Do I Test Fragrance Oil Compatibility With Plastic Bottles, Spray Pumps and Car Interior Surfaces?

Start with the number that will ruin your batch before any plastic does. The Room & Linen Spray Base publishes a 15% maximum fragrance load. The reed and car diffuser bases publish a 25–30% working ratio. Those are different products with different published windows, and carrying the car-bottle habit into a spray puts you ten points over a stated ceiling. After that, everything in your question is a test you run — because CSI publishes no compatibility data for any oil against any plastic, any pump or any car surface, and neither does anyone else who has not tested your exact formula.
10 points
25% working ratio on the reed and car bases minus the 15% maximum published on the spray base — the one import that explains most clouded spray batches · 8ml bottle ₹24.00 each · spray base ₹1.998/g · CSI live pricing, October 2026
Quick answers — read this first
What load do I use in a spray? What the spray base page publishes: 8% to 15%, with 10% recommended and 15% stated as the maximum, then a 12–24 hour rest before bottling. Its worked example is 90 g base + 10 g fragrance oil = 100 g spray. Do not bring 25% across from a car diffuser bottle.

Which plastic do I test? Neither CSI spray bottle is plastic — both are glass, and the 8ml Glass Bottle with Spray and Cap page states why. The plastic you cannot design out is inside the pump, and no page states what it is made of.

Is there a leather oil to test? No. A live title search returns zero listings containing "leather" that are buyable — the single leather-direction listing, Tomford Ombre Leather Inspired Fragrance Oil, is at zero stock across its variants, and there is no suede, no musk and no amberwood oil in the range either. Your leather direction has to be built from the dark woody and tobacco oils CSI does list, under a scent name of your own.

What does the whole test cost? Twenty filled 8 ml bottles at an oil charge of ₹7.18 each works out to ₹911.40 of materials — bottle, base and oil — for a thirty-day answer that no supplier can give you.
The short answer
Use the spray page's numbers, not the car page's: 8–15% load, 10% recommended, 15% maximum, 12–24 hour rest, add fragrance first then top up with base, stir to clear. If it clouds, the page's own instruction is to reduce the percentage and retest — and explicitly not to add water.
Compatibility is a contact pair, not a product: one component or surface, against one finished formula, for one fixed duration, with a written pass criterion. Six pairs cover a spray: glass body, pump assembly, dip tube, cap, label and carton.
The pump is the unknown, and it is also the only moving part: the 8 ml page publishes 0.1–0.12 ml per actuation and 65–80 sprays per fill, but states no material for the pump internals. The ₹42 bottle publishes no spray volume at all.
Never claim a car surface is safe: the spray base page says avoid direct spray on screens, polished wood or unfinished leather; the car freshener kit page says avoid direct contact with polished, plastic or leather surfaces. Those are cautions, not clearances. Print the caution, do not print an assurance.
Two different products, two published windows — percentage of fragrance oil by weight SPRAY BASE Room & Linen 8% – 15% published 10% recommended 15% max CAR / REED diffuser bases 10% – 30% blend range 25 – 30% working ratio 10 points 0% 5% 10% 15% 20% 25% 30% An 8 ml spray at 10% carries 0.8 g of oil. The same bottle at 25% would carry 2.0 g — ten points past the stated ceiling.
Both bars are copied from CSI product pages, not estimated. The upper bar is the Room & Linen Spray Base: 8–15% published, 10% marked recommended, 15% marked maximum. The lower bar is the reed and car diffuser base family: "Blend with 10-30% fragrance oil" with a 25–30% working ratio in the ratio panel. Nothing here says a spray cannot be loaded higher; it says the page selling you the spray base does not.
Straight answer
How do I test fragrance oil compatibility with plastic bottles, spray pumps and car interior surfaces?
You build the finished formula first, at the load the spray base page actually publishes — 8–15%, 10% recommended, 15% maximum, 12–24 hour rest — and then you put that exact formula in contact with every component it will touch for a duration you fix in advance. That is the whole method, and it is the only method available, because no CSI page publishes compatibility data for any oil against any plastic, any pump elastomer or any car surface, and a supplier who has not tested your formula cannot honestly give you one. Three things narrow the job. First, the bottle is not the plastic problem: both CSI spray bottles are glass, and the 8 ml page states that glass "does not react with alcohol, carrier oils, fragrance compounds, or essential oils" while PET and HDPE "can absorb fragrance compounds over time, leach plasticisers into the liquid". Second, the pump is the real unknown — it is the only component with moving parts, the only one with elastomer seals, and the only one whose material is not stated anywhere. Third, car surfaces are a caution, not a test you can pass: the spray base page tells you to avoid screens, polished wood and unfinished leather, and the car freshener kit page tells you to avoid polished, plastic and leather surfaces, so the honest instruction on your own label repeats those rather than contradicting them. And on the fragrance itself: there is no leather oil in the range to test. A live title search returns one leather listing, at zero stock across every variant. Build the direction from the dark woody and tobacco oils CSI does list, give it your own name, and keep every brand comparison out of your copy.
One line: the 15% ceiling is published, the glass is published, the pump material is not, and the car surface is a caution — so test the pair, record the duration, and print the caution.
The whole test rig: 8ml Glass Bottle with Spray and Cap ₹120 for 5 (₹24.00 a bottle, pump and cap included), Room & Linen Spray Base ₹999 for 500 g (₹1.998 a gram, so a mass-based costing is clean), and Isopropyl Alcohol Spray ₹383 for 150 ml to flush the pump between fills, as the bottle page itself instructs. Twenty filled test bottles cost ₹911.40 of material.
Shop spray accessories

Two load windows, ten points apart

The most expensive mistake in a spray batch is a number you imported from a different product's page.

If you have been making the 12 ml wooden-cap hanging bottles, 25% is burned into your hands: nine millilitres of base, three grams of oil, cap it, rest it, hang it. That ratio comes off the reed and car diffuser base pages — "Blend with 10-30% fragrance oil", a 25–30% working ratio, a 24–48 hour rest. It is the right number for that product.

It is not the number for a spray. The Room & Linen Spray Base publishes its own window and it is lower and narrower: 8% light, 10% recommended, 15% maximum, with a 12–24 hour rest rather than 24–48. Its own worked example is spelled out on the page as 90 g base plus 10 g fragrance oil equals a 100 g spray. And its clouding instruction is unusually direct for a product page: if the blend clouds, "the fragrance oil may not be fully compatible at that load — reduce percentage and retest", and do not add water.

Put the two windows side by side and the 25% habit lands ten points above a stated maximum — in an 8 ml bottle, 2.0 g of oil where the page recommends 0.8 g. If you have read that this base clouds, check the load before you blame the base. The first suspect is arithmetic imported from another page.

Published figures only · copied from CSI product pages, October 2026
What each page actually publishes — and the one figure none of them publish
Figure Room & Linen Spray Base Reed & car diffuser bases Car freshener making kit
Fragrance load range 8% to 15% "Blend with 10-30% fragrance oil" Not published as a percentage
Recommended load 10% 25–30% working ratio in the ratio panel Not published
Stated maximum 15%, with "test for clarity at this level" 30% Not published
Rest before bottling 12–24 hours 24–48 hours "24–48 hours before use"
Worked example on the page 90 g base + 10 g oil = 100 g Ratio panel only, no worked grams 3 bottles, 3 oils, 1 base
Clouding instruction Reduce percentage and retest; do not add water; filter through fine mesh if particulate shows Not published Not published
Surface caution Avoid screens, polished wood, unfinished leather; spot test unfamiliar fabrics Not published per surface Avoid direct contact with polished, plastic or leather surfaces
Compatibility with a named plastic Not published Not published Not published
Worked out above: 25% − 15% = 10 percentage points. In an 8 g blend, 10% is 0.8 g of oil and 7.2 g of base; 15% is 1.2 g and 6.8 g; 25% would be 2.0 g and 6.0 g. 2.0 ÷ 0.8 = 2.5×. The spray base is sold by weight — ₹999 ÷ 500 g = ₹1.998 per gram — so 7.2 g of base is ₹14.39 and 6.8 g is ₹13.59. Every figure in the three right-hand columns is quoted from the product page named at the top of that column; where a page publishes nothing, the cell says so rather than borrowing from a neighbour.

One cross-page agreement is worth noticing. The 8 ml bottle page states that "thin oil dilutions (jojoba, fractionated coconut at 5-15% fragrance oil) spray cleanly" and "thicker oil blends may spray less evenly". The spray base's 8–15% window sits inside that 5–15% band — two pages, written for different products, agreeing about where a fine-mist pump is comfortable, and both stopping well short of 25%.

The contact pair, and the six you own

"Is this oil compatible with plastic?" has no answer, because neither "this oil" nor "plastic" is a thing you can test. What you can test is a contact pair: one named component, against one finished formula at one stated load, for one fixed duration, judged against a pass criterion written down before you start. Change the load and it is a different pair. That is why no supplier can hand you a table — the table would have to be indexed by your formula.

A finished 8 ml spray has six contact pairs and not one more. Five of them are things you bought; the sixth is the surface your customer points the bottle at. Listing them properly is most of the work, because the moment they are written down it becomes obvious which ones are already answered on a page and which ones only thirty days will answer.

The contact pair register · six pairs, one formula, one duration each
What CSI publishes about each component, and what is left for you to measure
Contact pair Material as published What the page states What you must test Pass criterion to write down
Glass body Clear glass, stated "chemically inert" "does not react with alcohol, carrier oils, fragrance compounds, or essential oils"; "no migration of materials between the bottle and its contents" Clarity of the blend over time, not the glass No cloud, no sediment, no colour shift at day 30
Pump mechanism Not published — "fine-mist atomiser spray pump" 0.1–0.12 ml per actuation; 65–80 sprays per fill Actuation force, mist pattern, dribble, seizing, at day 1 / 7 / 30 Same mist pattern and no dribble at day 30 as at day 1
Dip tube Not published Nothing stated Softening, swelling, discolouration, cloudiness of the tube itself Tube straight, clear and unswollen; pump still primes in two strokes
Friction-fit cap Not published "Leakproof — yes, when cap is fitted" Grip after repeated removal, and leakage inverted overnight No weight loss overnight inverted; cap still holds
Label and adhesive Yours, not CSI's Nothing stated Edge lift and ink bleed after a deliberate spill down the bottle Label legible and attached after three wiped spills
Car interior surface Your customer's, unknown to everyone Cautions only — see the surfaces section below Nothing you can clear. You print the caution instead There is no pass. The criterion is the warning on your label
Why six and not one: the glass body is answered by the page, so it costs nothing. The cap is a ten-second overnight check. The label is your own purchase. That leaves two genuine unknowns — the pump mechanism and the dip tube — and both live in one component, which is why the most useful thing you can do before ordering in volume is ask what that component is made of. At three checkpoints and two loads the pump pair is 6 cells, read off the same bottles as the dip tube; add a sealed reference at each load and the programme is 8 bottles minimum, 20 with duplicates.

The protocol below is written for the 8 ml bottle because at ₹24.00 it is the cheapest finished unit in the range, which makes duplicates affordable. Run the identical steps on the ₹42 fifty-millilitre bottle if that is your format; only the grams change.

1
Fix the formula and write it as grams, not percentagesPick one oil and one load. At the page's recommended 10% in an 8 g fill, that is 0.8 g of oil and 7.2 g of base; at the 15% maximum it is 1.2 g and 6.8 g. Weigh both legs on a ₹354 scale and record the actual weights, not the intended ones. The base is priced by weight and the bottle is described by volume, so pick mass as your convention for this whole test and never mix the two in one line of your log.
2
Blend in the order the page gives, then restThe page's order of addition is explicit: fragrance oil into a clean vessel first, then the base to make up the total weight, stirred gently until uniform and crystal clear. Then rest 12–24 hours before bottling — not 24–48, which is the reed figure. If particulate shows after the rest, the page says filter through fine mesh. A ₹300 Silicon Measuring Beaker 100 ML is enough vessel for a 100 g batch, which fills twelve 8 ml bottles with change.
3
Fill, cap, weigh and photograph every bottle on day zeroWeigh each filled bottle to the gram and write the number on the label. Photograph the mist pattern against a dark card from a fixed distance. Count ten actuations and weigh again — that gives you your own millilitre-per-spray figure to compare with the page's stated 0.1–0.12 ml, and it is the only way to know whether your blend sprays like the page expects. Keep one bottle per load sealed and unactuated as a reference; you cannot read a change without something unchanged to read it against.
4
Actuate the working bottles on a fixed scheduleFive actuations a day, same time, same hand. A pump that is never used will not show you the failure a customer's pump shows at week three. Log anything that is not a clean mist: a dribble, a spit, a change in force, a pump that stops priming. None of those appear in a static soak test.
5
Read day 1, day 7 and day 30 against the same four questionsIs the liquid still clear? Is the dip tube still straight, clear and unswollen? Does the pump deliver the same pattern and need the same force? Has the capped bottle lost weight? Four yes-or-no answers, three times, per bottle. Write them in a table before you start, so you are filling cells rather than forming impressions. Thirty days is a choice, not a standard, so state your duration whenever you quote the result.
6
Run a parallel car bottle and a parallel indoor bottleTwo identical bottles, one left in a parked car and one kept indoors, both weighed at the same checkpoints. A car cabin is hot, sealed and sunlit; that is a description you can give and a temperature figure is not, because nobody has measured yours. The paired weights are what turn "it behaved differently in the car" into a number of grams. Keep them capped and unactuated so that weight loss means leakage and nothing else.
7
Flush and inspect the pump at the end, then decideEmpty a test bottle, add a little isopropyl alcohol and pump it through several times — the bottle page gives this as its own cleaning method — then pull the pump and look at the dip tube and the collar in daylight. Swelling, tackiness or cloudiness of the plastic is your answer. If you see any of it, the next step is a lower load and a retest, exactly as the base page instructs for clouding, and a WhatsApp message asking what that component is made of before you order a thousand of them.
The mistake: treating a clear blend on day one as a compatibility result. Everything in a spray looks fine at day one. Clouding at a given load often appears after the rest rather than during the stir, plasticiser effects take weeks, and a pump that will fail does it after a few hundred actuations rather than the first ten. A single day-one photograph is a record, not a result. The fix is boring: fix the duration before you start, keep a sealed reference, actuate on a schedule, and do not report a conclusion from fewer than three checkpoints. And if the blend clouds at 15%, the page's own instruction is the fix — reduce the percentage and retest, and do not add water.

The plastic question CSI answers with glass

Your question assumes a plastic bottle. CSI does not sell one for this job. Both spray listings in the range are glass: the 8ml Glass Bottle with Spray and Cap (Pack of 5) at ₹120 the pack, and the 50ml Room Spray Bottle with Golden Spray at ₹42. So the first useful thing to know is that the compatibility question you were about to spend a month on has partly been decided for you by what is on the shelf.

The 8 ml page is unusually explicit about why, and because it is the store's own published position it is worth quoting rather than paraphrasing. Glass, it says, "does not react with alcohol, carrier oils, fragrance compounds, or essential oils", with "no migration of materials between the bottle and its contents". Of plastics it says that PET and HDPE "can absorb fragrance compounds over time, leach plasticisers into the liquid, and alter the character of sensitive aromatic materials". It adds that "certain fragrance compounds — particularly citrus terpenes and light top notes — are sensitive to container materials".

Treat that as a reason to choose glass, not as a test result for your formula: it names no load, no duration and no oil, and it is written to sell a glass bottle. What it does tell you is where to point your month — not at the bottle wall, but at the one component that is unavoidably plastic and unavoidably in contact. The pump.

Both CSI spray bottles · live prices and stock, October 2026
What each bottle costs to fill at the published 10%, by mass
Bottle Pack price Per bottle Fill at 10% by mass Base cost Hardware + carrier Per gram of finished spray
8ml Glass Bottle with Spray and Cap (Pack of 5) ₹120.00 ₹24.00 7.2 g base + 0.8 g oil ₹14.39 ₹38.39 ₹4.80 before oil
50ml Room Spray Bottle with Golden Spray ₹42.00 ₹42.00 45 g base + 5 g oil ₹89.91 ₹131.91 ₹2.64 before oil
8 ml at the 15% maximum ₹120.00 ₹24.00 6.8 g base + 1.2 g oil ₹13.59 ₹37.59 ₹4.70 before oil
8 ml at the 8% light load ₹120.00 ₹24.00 7.36 g base + 0.64 g oil ₹14.71 ₹38.71 ₹4.84 before oil
50 ml at the 15% maximum ₹42.00 ₹42.00 42.5 g base + 7.5 g oil ₹84.92 ₹126.92 ₹2.54 before oil
Worked out above: spray base ₹999 ÷ 500 g = ₹1.998/g. 8 ml bottle ₹120 ÷ 5 = ₹24.00. At 10% in an 8 g fill: 8 × 0.9 = 7.2 g base × 1.998 = ₹14.3856 → ₹14.39; + ₹24.00 = ₹38.39; ÷ 8 g = ₹4.80 a gram. At 15%: 8 × 0.85 = 6.8 g × 1.998 = ₹13.59; + ₹24 = ₹37.59. At 8%: 7.36 × 1.998 = ₹14.705 → ₹14.71. For the 50 ml bottle a 50 g fill is assumed: 45 × 1.998 = ₹89.91, + ₹42 = ₹131.91, ÷ 50 = ₹2.64. A fill weight is an assumption, not a published figure — neither bottle page states a fill weight, only a volume, and no density is published for the base, so these grams are the convention this page has chosen and stated.
The bottle is 57% of your 8 ml unit
At the recommended 10% with a woody oil at ₹8.98 a gram, a finished 8 ml spray costs ₹45.57 in materials — ₹24.00 bottle, ₹14.39 base, ₹7.18 oil. The bottle alone is 52.7% of that, and the bottle plus base is 84.2%. The oil you have been agonising over is 15.8% of the unit. The same arithmetic on the 50 ml bottle gives ₹176.81 a unit, of which the bottle is 23.8%. If your margin is tight, the format decision moves far more money than the fragrance decision: ₹5.70 against ₹3.54 per gram of finished product, a 61% difference driven almost entirely by glass.

What the pump publishes and what it hides

The pump is the most documented component in this build and still the least known. The 8 ml page publishes a genuine specification table: capacity 8 ml, pump type "fine-mist atomiser spray pump", pump output approximately 0.1–0.12 ml per spray, sprays per fill approximately 65–80, a friction-fit cap, refillable with the pump removable, and "compatible with alcohol-based perfumes, oil-diluted fragrances, water-based sprays". For a packaging component in this range, that is a lot.

What it does not publish is the one thing a compatibility question needs: what the pump and dip tube are made of. There is no polymer named, no gasket material, no elastomer. So the page can tell you how much liquid leaves the nozzle and cannot tell you what happens to the parts that moved it. That is the gap your thirty days is for, and it is also a short WhatsApp message.

Then there is a contradiction between two CSI pages that you should know about before you promise a customer anything. The spray base page's recommended sprayer is "a fine-mist, high-output trigger sprayer (approximately 0.3-0.5ml per spray)", which it says "maximises room fill and even fabric coverage". The 8 ml bottle delivers 0.1–0.12 ml. The bottle CSI sells for small sprays is therefore two and a half to five times below the spray volume the base page recommends, and the ₹42 bottle publishes no spray volume at all, so it cannot settle the question either way. Neither page is wrong for its own purpose, but you cannot quote both at once, and you cannot derive a spray count for the ₹42 bottle from the base page's recommendation and call it published.

Spray volume · published figures against arithmetic, clearly separated
What a spray count is and is not confirmed for
Source Spray volume Sprays from an 8 ml fill Sprays from a 50 ml fill Status of the figure
8 ml bottle page, stated output 0.10 ml 80 500 Published for the 8 ml bottle only
8 ml bottle page, stated output 0.12 ml 67 417 Published for the 8 ml bottle only
8 ml bottle page, stated sprays per fill Not restated 65–80 Not stated Published, and consistent with the output figure
Spray base page, recommended sprayer 0.30 ml 27 167 A recommendation for a trigger sprayer, not a measurement of either CSI bottle
Spray base page, recommended sprayer 0.50 ml 16 100 A recommendation for a trigger sprayer, not a measurement of either CSI bottle
50 ml bottle page Not published — No confirmed count Measure it yourself: weigh ten actuations
Worked out above: 8 ÷ 0.10 = 80; 8 ÷ 0.12 = 66.7 → 67; 50 ÷ 0.10 = 500; 50 ÷ 0.12 = 417; 8 ÷ 0.30 = 26.7 → 27; 8 ÷ 0.50 = 16; 50 ÷ 0.30 = 167; 50 ÷ 0.50 = 100. The page's own 65–80 sprays agrees with its 0.1–0.12 ml output, which is a good sign that both were measured rather than guessed. Only the top three rows are published figures for a CSI product. The 0.3–0.5 ml rows are arithmetic on a recommendation written for trigger sprayers, and the bottom row is the honest blank: the ₹42 bottle publishes no spray volume, so no spray count is confirmed for it. Cost per spray on the 8 ml unit at ₹45.57 of materials: ₹0.57 at 80 sprays, ₹0.70 at 65.
Do not print a spray count you have not weighed. "Approximately 150 sprays" on a 50 ml label is the single easiest claim to make and one of the easiest to be caught on, because a customer with a kitchen scale can check it. The measurement takes four minutes: weigh the filled bottle, actuate ten times into a tissue, weigh again, divide by ten. That gives grams per spray for your blend in your bottle — which is better than either CSI figure, because a thicker oil blend genuinely sprays differently and the bottle page says so. Then divide your fill weight by it and print a conservative round number with the fill weight stated beside it.

Car interiors: two cautions, no clearance

A caution is a published fact. A clearance is a promise, and nobody in this supply chain has earned the right to make one about somebody's dashboard.

This is the part of your question with no technical answer and a clear commercial one. CSI publishes no compatibility data for any surface — no paint, no clear coat, no dashboard polymer, no upholstery, no screen coating. What it publishes is cautions, in two places, and those tell you what to write on your own label.

The spray base page's usage notes say: external use only; avoid direct spray on screens, polished wood, or unfinished leather; spot test on unfamiliar fabrics before full application. The car freshener making kit page, which is the only surface-contact guidance anywhere in the car range, says: for car use only; avoid direct contact with polished, plastic, or leather surfaces; keep away from children and pets; 24–48 hours before use. Note that the same kit page also carries longevity language — "long-lasting (weeks, not days)" — that nothing else in the range supports. Treat the cautions as guidance and the duration as marketing copy; this page quotes neither as a specification.

Notice the overlap. A modern car cabin is mostly the things both pages tell you to avoid: a screen, plastic trim, and either leather or something trying to look like it. So the honest instruction is not "test until it is safe for interiors". It is spray into the air, not at the surfaces, and print that. On the one surface you can reasonably test — a fabric seat or mat — use the spot test the page already prescribes, on an offcut you own.

Car cabin surface classes · what is published, what is not, and what to print
Four surface classes and the only defensible position on each
Surface class Published CSI guidance Published compatibility data What you can test honestly What goes on your label
Screens and glossy trim Spray base: "avoid direct spray on screens" None Nothing. Do not test on a car you do not own "Do not spray towards screens or glossy surfaces"
Plastic and polished trim Kit page: "avoid direct contact with polished, plastic, or leather surfaces" None An offcut of similar plastic, if you can get one, with the duration stated "Avoid direct contact with interior surfaces"
Leather and leather-look Both pages name leather; the spray base specifies unfinished leather None Only a sample you own. Finished and unfinished behave differently and neither is characterised "Not for application to leather or upholstery"
Fabric seats and mats Spray base: "spot test on unfamiliar fabrics before full application"; "zero-residue finish on most fabrics" Qualitative only — "most fabrics", no list Your own offcut, spot test, dried and inspected in daylight "Spot test fabrics first" — repeating the supplier's own instruction
Cabin air Spray base lists "Car Interiors" among its applications None Weight loss of a capped bottle in a parked car against one kept indoors Directions for use, with the paired-bottle caveat kept out of the claim
One published fact worth having: the Room & Linen Spray Base page lists "Car Interiors" among the applications in its "Where It Shines" panel, alongside living rooms, bedrooms, bed linen and wardrobe mists. So CSI does name the car as an application for this base — which is why it is the right base to build a car spray on — while separately telling you to keep it off screens, polished wood and unfinished leather. Those two statements are consistent: it is an air-and-fabric product, not a surface treatment. Nothing on that page or anywhere else in the range characterises a specific interior material, so no surface claim is available to you at any price, and the label wording in the last column is the whole of what this section can give you.
The leather in your product name is not a material you can buy here. A live title search for "leather" returns exactly one listing, Tomford Ombre Leather Inspired Fragrance Oil, and it is at zero stock across its variants — so it is not linked anywhere on this page and should not be designed around. "Suede" returns nothing. "Musk" returns nothing. "Amberwood" and "cashmere" return nothing. That means a leather-musk brief has no first material, let alone a second. What CSI does list in the dark, dry, woody direction a leather brief usually wants: Coffee Vanilla Tobacco Fragrance Oil (423 packs listed, 50 g ₹449), MAHOGANY TEAKWOOD Bath and Body Works Inspired Fragrance Oil (its 50 g holds 5 packs and its 100 g just 1, so check the rung before you plan), Gilli Mitti (Patchouli) and Dark Vanilla Oud. Build your accord from those, name it yourself, and keep another brand's name off your bottle and your marketing; what you may legally print is a question for a qualified adviser.

What the test costs and what to buy

A twenty-bottle programme — two loads, three checkpoints, duplicates, two sealed references and two paired car-and-indoor bottles — costs ₹911.40 in materials at ₹45.57 a unit. That is the price of knowing rather than hoping. The four cards below are what goes in the cart.

1
The test vessel and the production vessel in one
8ml Glass Bottle with Spray and Cap (Pack of 5)
₹120.00 a pack of five, ₹24.00 a bottle with pump and cap included, 1,000 packs listed. This is the cheapest finished unit you can build in the CSI range and the most documented spray component on the site: it publishes 0.1–0.12 ml per actuation, 65–80 sprays per fill, a friction-fit cap stated leakproof when fitted, and a removable pump for refilling. Its own cleaning instruction is isopropyl alcohol pumped through and air-dried. What it does not publish is the material of the pump and dip tube — the two components your compatibility test exists to judge. Buy four packs to run the twenty-bottle programme; buy one to settle a single question.
Size Price Per bottle Filled at 10%
Pack of 5 ₹120.00 ₹24.00 ₹45.57 a unit
4 packs (the 20-bottle programme) ₹480.00 ₹24.00 ₹911.40 total
₹24.00 a bottle · the only CSI spray component with a published output figure Buy the 8ml spray bottles
2
The only published spray load window in the range
Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g)
₹999 for 500 g, 74 packs listed, ₹1.998 a gram — and because it is the only base in the range priced purely by weight, it is the only one that gives you a clean mass-based costing with no volume-to-weight guesswork. It publishes more method than any other page in the range: the 8–15% window with 10% recommended and 15% maximum, the order of addition, the 12–24 hour rest, the 90 g + 10 g worked example, the clouding remedy, the surface cautions, and "Car Interiors" among its listed applications. One pack at 10% makes about 555 g of blend — 69 bottles of 8 ml or 11 of 50 ml.
Size Price Per gram Blend at 10%
500 g ₹999.00 ₹1.998 555.6 g → 69 × 8 ml
₹1.998/g · 8–15% published, 10% recommended, 15% maximum Buy the spray base
3
The larger format, with one figure missing
50ml Room Spray Bottle with Golden Spray
₹42.00 each with its pump included, 90 listed. Per gram of finished product this is the cheaper format by a wide margin — ₹2.64 of hardware and carrier per gram against ₹4.80 on the 8 ml — because the glass cost spreads over six times as much liquid. The trade is that its page publishes no spray volume and no sprays-per-fill figure, so you cannot print a spray count for it from CSI data and you cannot borrow the base page's 0.3–0.5 ml recommendation as if it were a measurement of this pump. Weigh ten actuations of your own blend and you will have a better number than either page could give you. Run the same seven-step protocol on it if 50 ml is your production format.
Size Price Per bottle Filled at 10%
Single bottle ₹42.00 ₹42.00 ₹176.81 a unit
₹42.00 · cheapest per gram of finished spray, no published spray volume Buy the 50ml spray bottle
4
The step the bottle page tells you to take
Isopropyl Alcohol Spray 150 ML and 1 Litre packs
₹383 for 150 ml or ₹520 for 1 litre, 74 packs listed across the two. The 8 ml bottle page prescribes this by name: "add a small amount of isopropyl alcohol (IPA) to the empty bottle, pump several times to flush the spray mechanism, then allow to air dry completely before refilling." In a compatibility programme it does two jobs: it lets you reuse a test bottle for a second cell, and the flush is when you finally get to look at a pump that has sat in your blend for thirty days. The per-millilitre arithmetic is stark: ₹2.553 a millilitre at 150 ml against ₹0.52 at a litre, a 4.9× difference, so if you are running more than a handful of cells the litre is the only sensible rung.
Size Price Per ml Against the litre
150 ML ₹383.00 ₹2.553 4.9× dearer per ml
1 Litre ₹520.00 ₹0.520 The cheaper rung by far
₹0.52/ml at a litre against ₹2.553 at 150 ml Buy isopropyl alcohol spray
Priced above, CSI live pricing October 2026: 8ml Glass Bottle with Spray and Cap (Pack of 5) ₹120.00, 1,000 packs listed, so ₹24.00 a bottle; Room & Linen Spray Base 500 g ₹999.00, 74 listed, ₹1.998/g; 50ml Room Spray Bottle with Golden Spray ₹42.00, 90 listed; Isopropyl Alcohol Spray 150 ML ₹383.00 and 1 Litre ₹520.00, 74 listed across both variants; Silicon Measuring Beaker 100 ML ₹300.00; Candle Making Weighing Scale ₹354.00. The ₹45.57 unit assumes 0.8 g of a woody oil at the 50 g rung of Coffee Vanilla Tobacco, ₹449 ÷ 50 = ₹8.98/g, so 0.8 × 8.98 = ₹7.18. Twenty units = ₹911.40. One 500 g base pack at 10% yields 500 ÷ 0.9 = 555.6 g of blend; ÷ 8 g = 69 bottles, ÷ 50 g = 11 bottles. Every variant above was checked for availableForSale before it was linked.
The CSI principle
A compatibility claim is indexed by your formula, your component and your duration. Drop any one of the three and it stops being a claim and becomes a hope.
CSI publishes a load window, a rest time, a pump output and a set of cautions, and it publishes no compatibility data at all — because compatibility is not a property of an oil or a bottle. It is a property of a pair. The pair is cheap to test and it is yours, and twenty bottles at ₹45.57 is a smaller number than one recalled batch.
Moving to production? One 500 g spray base pack at ₹999 fills about 69 of the 8 ml bottles, which is 14 packs at ₹1,680, and the two together plus 55.6 g of oil come to roughly ₹3,178 for 69 saleable units. Before you commit, ask us what the pump and dip tube are made of — it is the one figure no page states, and it is the figure your compatibility test is really about.
Ask about bulk spray bottles
You cannot buy a compatibility table. You can buy twenty bottles, and thirty days later you will own one.
— CandleMakingSuppliesIndia
Why trust this guide

CANDLEMAKINGSUPPLIESINDIA supplies raw materials and packaging, not finished car perfumes. That is why this page contains no statement about how any CSI oil smells, no claim that any oil is compatible with any plastic, and no assurance about car paint, dashboards or upholstery. We have not smelled your blend and we have not tested it against your pump. What we can do is quote what our own product pages publish, name the places where they publish nothing, and hand you a protocol that costs ₹911.40 to run.

Prices, pack sizes and per-variant availability here come from live CSI data in October 2026 and every linked product was checked as orderable before it was linked. Stated specifications are quoted only where the page publishes them, and the full inventory is in the citation strip below. Where two pages disagree — the base page's 0.3–0.5 ml recommendation against the 8 ml bottle's 0.1–0.12 ml output — we name the disagreement rather than resolving it. No CSI page publishes a flash point used as an add temperature, a heat-stability figure, a throw figure or a longevity figure, and none is stated or implied here. Load percentages are formulation figures from the product page, not regulatory limits.

For documentation, GST invoicing, bulk pricing or component material details, message us on WhatsApp at +91 7397976926. Safety, labelling and transport decisions belong with a qualified adviser.

Frequently asked questions

What fragrance load should I use in a car perfume spray?
Use what the Room & Linen Spray Base page publishes: 8% to 15% of the total blend, with 10% recommended and 15% stated as the maximum, stirred to clear and rested 12–24 hours before bottling. Its own worked example is 90 g base plus 10 g oil. Do not carry across the 25–30% working ratio from the reed and car diffuser bases — that is ten points above this base's stated ceiling, and the page's instruction when a blend clouds is to reduce the percentage and retest, never to add water.
Does CSI sell a plastic spray bottle, and will fragrance oil damage plastic?
No plastic spray bottle is listed — both CSI spray bottles are glass. On plastics generally, the 8 ml bottle page states that PET and HDPE "can absorb fragrance compounds over time, leach plasticisers into the liquid, and alter the character of sensitive aromatic materials", and that glass "does not react with alcohol, carrier oils, fragrance compounds, or essential oils". That is a materials argument on a product page, not a test result for your formula. No CSI page publishes compatibility data for any named plastic against any named oil, so if you are using a plastic bottle from elsewhere, the pair has to be soak-tested with the duration written down.
How many sprays will my bottle give?
For the 8 ml bottle, the page publishes approximately 0.1–0.12 ml per actuation and 65–80 sprays per fill, and those two figures agree with each other arithmetically. For the 50 ml bottle, nothing is published — no spray volume, no count — so no spray count is confirmed for it. The base page's "approximately 0.3-0.5ml per spray" is a recommendation for a high-output trigger sprayer, not a measurement of either CSI bottle. Weigh the filled bottle, actuate ten times, weigh again and divide by ten; that is your number, for your blend.
Can I say my car perfume spray is safe for dashboards and leather seats?
No, and nobody in this supply chain can. CSI publishes no compatibility data for any interior surface. What it publishes is cautions: the spray base page says avoid direct spray on screens, polished wood or unfinished leather and spot test unfamiliar fabrics; the car freshener kit page says avoid direct contact with polished, plastic or leather surfaces. The defensible label repeats those cautions and instructs the user to spray into the air rather than at surfaces. Any wording you intend to print is a matter for a qualified adviser in your market.
Which leather fragrance oil should I buy for a leather car perfume spray?
There is none to buy. A live title search of the catalogue returns one leather listing — Tomford Ombre Leather Inspired Fragrance Oil — and it is at zero stock across its variants, which is why it is not linked here. "Suede", "musk", "amberwood" and "cashmere" each return zero listings. The in-stock oils that sit in the dark, dry, woody and tobacco territory a leather brief usually describes are Coffee Vanilla Tobacco, MAHOGANY TEAKWOOD Bath and Body Works Inspired, Gilli Mitti (Patchouli) and Dark Vanilla Oud. Sample them, judge them blind, name the result yourself, and tell us by WhatsApp that you want a leather oil — a standing gap is worth more to us as a request than as a silent substitution.
My spray went cloudy after resting. What do I change first?
The load, before anything else, and the base page says so in its own words: if clouding occurs "the fragrance oil may not be fully compatible at that load - reduce percentage and retest", and "Do not add water to resolve clouding." If you were at 15%, step to 10% and rest it again for the full 12–24 hours. If particulate rather than haze has appeared, the page's next step is to filter through fine mesh before filling. Only once the load is inside the published window and it still clouds is it worth treating the oil itself as the variable — and then the test is the same oil at 8%, 10% and 15% in three bottles, read at the same checkpoint.
Buy the window, not the habit
Ten points separate the spray base's maximum from the car base's working ratio. Start at 10%, rest it twelve hours, and let twenty bottles answer the rest.
8ml Glass Bottle with Spray and Cap ₹120 for 5 (₹24.00 each, 0.1–0.12 ml a spray, 65–80 sprays a fill); Room & Linen Spray Base 500 g ₹999 (₹1.998/g, 8–15% with 10% recommended and 15% maximum, 12–24 hour rest); 50ml Room Spray Bottle with Golden Spray ₹42.00 with no published spray volume; Isopropyl Alcohol Spray ₹383 for 150 ml or ₹520 for a litre; Silicon Measuring Beaker 100 ML ₹300; Candle Making Weighing Scale ₹354. No leather, suede, musk, amberwood or cashmere oil is listed in stock. Message us for bulk pricing, GST invoicing and component details.
Shop spray bases & bottles Ask on WhatsApp
Editorial standards & sources
About this guide: Written by the CANDLEMAKINGSUPPLIESINDIA team. Product recommendations reflect the CSI range; the contact-pair method, the seven-step protocol and the label wording apply to any supplier's materials.

Customer reviews: The reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on their product pages. Names, star ratings, dates and products are as recorded by Judge.me; wording is unedited.

Figures verified October 2026 from live CSI data. Prices: 8ml Glass Bottle with Spray and Cap (Pack of 5) ₹120.00, 1,000 packs listed; Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g) ₹999.00, 74 listed; 50ml Room Spray Bottle with Golden Spray ₹42.00, 90 listed; Isopropyl Alcohol Spray 150 ML ₹383.00 and 1 Litre ₹520.00, 74 listed across both; Silicon Measuring Beaker 100 ML ₹300.00, 86 listed; Candle Making Weighing Scale ₹354.00, 98 listed; Coffee Vanilla Tobacco 50 g ₹449.00, 100 g ₹899.00, 500 g ₹4,399.00, 1 kg ₹8,599.00, 423 packs listed; MAHOGANY TEAKWOOD Bath and Body Works Inspired Fragrance Oil 50 g ₹440.00 (5 packs), 100 g ₹880.00 (1 pack), 500 g ₹4,400.00, 1 kg ₹8,800.00; Gilli Mitti (Patchouli) 15 g ₹140.00, 50 g ₹448.00, 100 g ₹896.00, 500 g ₹4,480.00, 1 kg ₹8,960.00; Dark Vanilla Oud 15 g ₹105.02, 50 g ₹320.00, 100 g ₹590.00, 500 g ₹2,845.00, 1 kg ₹5,691.00. Arithmetic: ₹999 ÷ 500 g = ₹1.998/g; ₹120 ÷ 5 = ₹24.00; 8 g at 10% = 7.2 g base (₹14.39) + 0.8 g oil; ₹449 ÷ 50 = ₹8.98/g so 0.8 g = ₹7.18; unit total ₹45.57 and 20 units ₹911.40; 8 g at 15% = 6.8 g base ₹13.59; 8 g at 8% = 7.36 g base ₹14.71; 50 g at 10% = 45 g base ₹89.91 + ₹42.00 bottle = ₹131.91, plus 5 g oil ₹44.90 = ₹176.81; per gram of finished spray ₹5.70 against ₹3.54; 500 g base ÷ 0.9 = 555.6 g of blend = 69 × 8 g or 11 × 50 g; 14 bottle packs = ₹1,680; ₹383 ÷ 150 = ₹2.553/ml and ₹520 ÷ 1,000 = ₹0.520/ml, a 4.91× ratio; 25% − 15% = 10 percentage points; 2.0 g ÷ 0.8 g = 2.5×; spray counts 8 ÷ 0.10 = 80, 8 ÷ 0.12 = 67, 50 ÷ 0.30 = 167, 50 ÷ 0.50 = 100. Stated specifications as published: Room & Linen Spray Base — 8–15% load, 10% recommended, 15% maximum, clear single-phase, 12–24 hour rest before bottling, 90 g base + 10 g oil = 100 g example, fragrance added first then base, "reduce percentage and retest" with no water added if clouding, fine-mesh filter if particulate shows, recommended sprayer approximately 0.3–0.5 ml per spray, external use only, avoid direct spray on screens, polished wood or unfinished leather, spot test unfamiliar fabrics, "Car Interiors" listed among applications. 8ml Glass Bottle with Spray and Cap — clear glass stated chemically inert, 8 ml capacity, fine-mist atomiser pump, output approximately 0.1–0.12 ml per spray, approximately 65–80 sprays per fill, friction-fit cap stated leakproof when fitted, refillable, PET and HDPE stated to absorb fragrance compounds and leach plasticisers, isopropyl alcohol flush as the stated cleaning method, thin dilutions at 5–15% fragrance stated to spray cleanly. Car Hanging Freshener Making Kit — for car use only, avoid direct contact with polished, plastic or leather surfaces, 24–48 hours before use. Not published anywhere and therefore not stated here: the material of the pump, dip tube or cap; any compatibility datum for any oil against any plastic, elastomer, paint, dashboard polymer, screen coating or upholstery; a spray volume or count for the 50 ml bottle; a fill weight for either bottle; a density for the spray base; any throw, longevity, heat-stability or evaporation figure; any fragrance-oil MOQ, lead time, lot code or batch-variation tolerance. The 12 ml wooden-cap car bottle carries a 12 ml title against a handle and body copy that both say 20 ml — named, not resolved, and routed to WhatsApp. A live title search in October 2026 returned zero buyable listings for leather, suede, musk, amberwood and cashmere; the single leather-direction listing is at zero stock and is not linked. No brand named in a reader's brief is associated with, endorsed by or licensed to CSI or to any oil here, no oil is described as a match, clone, copy or equivalent of any perfume, and nothing here advises marketing a product under another brand's name — trademark and labelling questions go to a qualified adviser. Prices and availability change; the linked product pages are always authoritative.
Back to blog