I Made a 100 g Reed Diffuser Trial That Stayed Clear for Two Days but Became Cloudy After a Week — How Long Should I Test Stability Before Selling?

I Made a 100 g Reed Diffuser Trial That Stayed Clear for Two Days but Became Cloudy After a Week — How Long Should I Test Stability Before Selling?

 

Gold 50 ML pack of 10 ₹826.00 Gold 120 ML pack of 10 ₹1,062.00 Comparison base 500 ML ₹1,099.00
Clear for two days, cloudy after a week
Test four weeks, open and sealed, at three temperatures, before a formula goes on sale.
★★★★★
"Nice product"
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML)
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
★★★★★
"Absolutely loved it!! Smells so perfect!! Go for itt! Packing is done very carefully and happy for that!❤️"
Kavitha murthyOct 2025
Fresh Strawberries
★★★★★
"Really nice fragrance, we continue our shopping going forward."
Uchu OmoideVerified buyer · Sep 2025
Fresh Strawberries
★★★☆☆
"Warm comforting fragrance"
M AVerified buyer · Sep 2025
Autumn
★★★★★
"I like it."
AshwiniSep 2025
British Rose Fragrance Oil
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. They are general reviews of the products named on each card, not assessments of the advice set out below. Wording is unedited.
✓ Prices verified 7 October 2026, stock checked per size ✓ GST invoice; MSDS and IFRA documentation for oils on request ✓ We sell bases, reeds, bottles and oils — not DPG, DPM or IPM
CSI Reed Diffusers · Stability
Clear on day 2 only means it passed day 2. Before you sell, watch three in-use bottles and three sealed retains at room, warm and cool spots for at least four weeks, and restart whenever anything changes.
28 days
our working minimum (judgement) with no visible change in every bottle before selling; longer for stock that sits · CSI live pricing, October 2026
Quick answers — read this first
My 100 g reed diffuser trial was clear for two days and cloudy after a week. How long should I test before selling? Long enough to see past the point where it failed, at more than one temperature. Our working minimum (judgement, not a standard) is four weeks with no visible change in every bottle: three in-use bottles with reeds, and sealed retains at room, warm and cool spots. Run six to eight weeks if stock will sit in shops.

Is two weeks enough? Not for this formula. Yours failed at day 7, so a two-week pass on the next version has only looked at twice the window in which the first one failed. And "clear for two days" told you nothing about week one.

What do I change first? One thing. Repeat the failed formula as arm A and change only the load, the base or the oil in arm B. Same 100 g batches by weight, same schedule: days 0, 1, 2, 3, 7, 14, 21 and 28.

What does CSI have for this? The bottles for both sets and a comparison base: Gold 120 ML and 50 ML packs ₹1,062.00 and ₹826.00, Black fibre reeds 50 ₹400.00, Pure Performance 500 ML ₹1,099.00: ₹3,387.00. CSI does not sell DPG, DPM, IPM or Augeo-type solvents, and our bases publish no stability data. They are a test arm, not a promised fix.
The short answer
Minimum before selling (judgement): 28 days, every bottle unchanged; 42–56 days for shop or courier stock.
Where: 3 in-use bottles with reeds at room temperature, plus sealed retains at room, warm and cool spots, per arm.
When: day 0, 1, 2, 3, 7, 14, 21, 28; same card, same light, same words; weigh the in-use bottles.
Restart rule: any change to oil, base, load or lot restarts the clock.
Four weeks, four places, one rule Check days for a 100 g trial that clouded at day 7 (schedule is judgement, not a standard). Day 0 1 2 3 7 14 21 28 42 56 In use, reeds in 3 bottles · room Sealed · room 1 retain, 50 ML Sealed · warm 1 retain, labelled spot Sealed · cool 1 retain, labelled spot first trial clouded Before selling: every bottle unchanged to day 28 shop or courier stock At each dot: clarity, layers, sediment, colour, odour, photo; weigh the in-use bottles. Filled dot: check. Dashed dot: optional longer check. Not CSI test data. Warm and cool spots are labelled places in your home; log their temperatures.
Observation calendar for one test arm. Filled dots are checks; dashed dots are optional longer checks for stock that will sit. The dashed frame marks day 7, where the first trial failed. Judgement, not a standard; not CSI test data.
Straight answer
I made a 100 g reed diffuser trial that stayed clear for two days but became cloudy after a week. How long should I test stability before selling?
There is no single official figure for handmade diffusers, so you set one and write it down. Our judgement: at least four weeks with no visible change in every bottle, and six to eight weeks if your bottles will sit in shops, warehouses or couriers. "Every bottle" means two kinds. In-use bottles: three per formula, reeds in, at room temperature, because evaporation changes the liquid. Sealed retains: one each at room temperature, in a warm spot and in a cool spot, because temperature changes what stays dissolved. Check on days 0, 1, 2, 3, 7, 14, 21 and 28 under the same light. Your trial failed at day 7, so the formula as it stands is not for sale. Repeat it beside one changed version (lower load, another base or another oil) and run both through the full schedule. Any change to the oil, base, load or a raw-material lot restarts the four weeks.
One line: four weeks clear in every bottle, open and sealed, at room, warm and cool, before you sell; longer for stock that sits; restart the clock with every change.
The four-week kit, CSI side: Gold 120 ML 10 ₹1,062.00 + Gold 50 ML 10 ₹826.00 + Black reeds 50 ₹400.00 + Pure Performance 500 ML ₹1,099.00 = ₹3,387.00. Without a CSI base arm: ₹2,288.00. In stock on 7 October 2026.
Gold bottles — from ₹826.00

Your trial, restated, and why day 2 told you nothing

A formula that is clear on day 2 has passed the day-2 test. That is all it has passed.

Your situation: you made a 100 g trial, it was clear for two days, and by about day 7 it was cloudy. Now you want to know how long to watch the next version before you sell it. The title gives the 100 g and the timeline; the rest is the series default, labelled as a worked example: 20 g fragrance oil + 80 g base by weight, rested, then about 100 g in a 120 ML Gold bottle with five fibre reeds at room temperature. The base might be your own DPG, DPM or IPM blend, an Augeo-type solvent blend (Augeo is a Solvay trademark), or a ready-made base.

Two days told you the oil and base mixed and didn't separate at once. They told you nothing about the slow processes: a fragrance near the base's limit slowly coming out of solution, the liquid in an open bottle changing as part of it evaporates, moisture from humid air, cooler nights, light. All of these play out over weeks. So the length of the test isn't a formality. It is the only way to see the failures a customer would see.

You also learned something useful. One bottle, at one temperature, failed at day 7. That gives you a minimum test window, tells you which processes are fast enough to matter, and rules out "a few days" as an answer. If the cloudiness had appeared overnight, the question would be the separation screen in 8362; if it had been milky the moment you mixed, the cluster hub 8361.

Don't do this: sell the next version after a two-week pass because Diwali is close. A formula that failed at day 7 needs to show it holds well beyond day 7, in more than one bottle and more than one spot. And don't raise the fragrance % to "cover" a weaker-smelling clear version. More oil in a base that was already struggling to hold it is the most common way to bring the cloud back.

What "cloudy after a week" can mean

"Cloudy" is several different observations, and each points somewhere different. Before you plan the next test, describe yours exactly. Is the haze even or patchy? Is there a line, specks at the bottom, a film on the glass? Is it in every bottle or one? If you kept a sealed sample, did that change too?

What the change means
The same "it went cloudy" can be five different things. Note which bottle changed, where it was kept and when; the pattern points to the cause.
You see Where and when Most likely meaning What to do
Even haze through the whole liquid All bottles, including the sealed room retain, by day 7 The oil is at or past what the base holds; it is slowly coming out of solution Lower load or other base (one change), then restart the 4 weeks
Haze only in the cool retain Cool spot; may clear when warmed Solubility drops as it cools: a borderline formula Treat as a fail for a product that will meet AC rooms or winter nights
Haze only in the open, in-use bottles Reeds in; sealed retains stay clear The liquid changes as it evaporates: a faster-evaporating part of the carrier leaves first, or the liquid takes up moisture from humid air Test a carrier with fewer components, or a ready-made base arm; check in humid months
A line or two layers Any bottle, often from the bottom up Separation: the overnight problem in slow motion See 8362; never sell a layered formula
Sediment or specks at the bottom Settles over days; liquid above may be clear Something in the oil or the mix is not staying dissolved; or debris from the bottle Check a plain-base bottle; ask the oil supplier; see 8364 for one-oil sediment
Colour darkening Mostly warm or sunny spots Some fragrance materials change colour with heat and light Cosmetic if clarity holds, but note it on the batch record, keep stock out of sun, and decide whether customers will accept it
New or "off" odour Any; sniff the retains blind beside a fresh batch A change in the oil or base during storage Stop; compare with a fresh 100 g; see 8370 for base odour

The row worth thinking hardest about is "haze only in the open bottles". A sealed liquid doesn't change much in composition. Put reeds in it and it starts to evaporate, and if your carrier is a blend, the parts don't necessarily leave at the same rate. A faster-evaporating part (DPM is generally more volatile than DPG; ethanol more so) can leave first and take some of the base's ability to hold fragrance with it. The same happens in reverse with moisture: some glycol-type solvents take up water from humid air, and many fragrance materials dislike water. This is why your plan needs both sealed and open bottles. Without the sealed retain, you can't tell "the formula is unstable" from "the formula changes as it is used". The fixes differ.

Make "cloudy" measurable
Keep a sealed bottle of plain base as your clarity reference. At each check, hold each test bottle and the reference against the same white card with a line of printed text behind them, in the same window light. Grade each bottle in words: clear (text sharp, matches reference), hazy (text soft), cloudy (text hard to read), plus line, layers or sediment. Photograph the row. Your own judgement on a dull evening is not a measurement.

The cause table

Seven causes produce "clear for two days, cloudy after a week". They fall into five groups: the carrier (solvent choice), the fragrance (load and oil character), reeds/bottle/fill, the room, and measurement. The test plan below tests most of these at once, which is why it has sealed and open bottles and three storage spots.

Cause table · clear for two days, cloudy after a week
Five groups kept apart: carrier (solvent choice), fragrance (load and oil character), reeds/bottle/fill, room and climate, and measurement. Each row has one check that tells it apart.
Cause What you'd see Discriminating check Fix
Solvent choice: a blended carrier whose faster-evaporating part leaves first, so the remaining liquid holds less fragrance In-use bottles haze; sealed retains stay clear Sealed retain vs open bottle of the same batch Simplify the carrier, or test a ready-made base arm on the same schedule
Solvent choice: moisture taken up from humid air (glycol-type solvents can do this; check your supplier's TDS) Haze in open bottles, worse in monsoon months or a bathroom Open bottle of plain base with reeds beside the formula: does the plain base haze too? Change the base, or keep the product for drier rooms and say so
Fragrance load: 20% is near the base's limit, so the oil comes out slowly Even haze in every bottle, sealed ones too Same oil at 15% on the same schedule Lower the load (weight-test throw) or change the base
Oil character: heavy, resinous or waxy components that drop out over days Haze turning to sediment; other oils stay clear in the same base A reference oil in the same base on the same schedule Choose another oil for diffusers; ask the supplier about the oil
Reeds, bottle, fill: water or cleaner left in a bottle; dust or debris Haze or specks in some bottles only; often a fine layer on the glass A bottle of plain base filled the same way Dry bottles fully; see 8366
Room and climate: cooler nights, an AC room, sun on one shelf Change in one storage spot only Compare the three sealed retains A product must pass at all three spots
Measurement: one bottle, judged by eye under different light "Cloudy" on a dull evening, "clear" next morning Same white card, same window, same time; a plain-base bottle as the clarity reference; photograph each check Three bottles per arm, fixed viewing method, written words for each grade

Two of these rows aren't formula problems at all: a wet bottle and a one-bottle judgement under bad light. Check those first, because they cost nothing to fix. The trap with residue is that it affects only the bottles that were rinsed. 8366 has the plain-base bottle test. If the haze turns into a deposit with one particular oil, 8364 covers how to investigate that oil.

Argued against our own interest: if your sealed retains stay clear, your open bottles are cloudy only in the bathroom you tested in, and your product will be sold for living rooms, a new base may be the wrong spend. Ours included. Test the same formula in a drier room first. And if your DPG blend passes four weeks at all three spots, keep it. We don't sell DPG, and we won't pretend our base always outperforms yours.

The observation schedule: four weeks, four places

The test is long because the failures are slow. Make every check identical so that the only thing changing is the liquid.

Each formula, or "arm", gets two sets of bottles. The in-use set is three 120 ML bottles, each its own 100 g batch by weight, with five fibre reeds each, together on one shelf at room temperature. The weight log gives you consumption (grams per day) and the reeds turn it into a real product. The sealed set is one 120 g batch split into three 50 ML bottles of about 40 g, capped tight and filled close to the top, kept at room temperature, in a warm spot and in a cool spot. That set shows the formula on its own, without evaporation.

The schedule, written out
Judgement, not a standard. Day 0 is the day you bottle, after the 24–48 hour rest the CSI base pages ask for.
Check In-use bottles (3 per arm, reeds in) Sealed retains (room, warm, cool) Why this day
Day 0 Weigh, photograph, note clarity; reeds in Weigh, photograph, cap tightly Your baseline
Days 1, 2, 3 Clarity; weigh on day 3 Clarity Catches mixing and overnight separation (8362)
Day 7 Clarity, weigh, blind sniff, reed tips Clarity, colour, odour Where your first trial failed
Day 14 Clarity, weigh, sniff; swap one bottle's reeds for fresh ones Clarity, colour, odour Halfway; reed swap separates reed clogging from liquid change
Day 21 Clarity, weigh, sniff Clarity, colour, odour Most slow changes are visible by now
Day 28 Clarity, weigh, sniff; compare with a freshly made bottle Clarity, colour, odour; weigh sealed bottles to check the seal Earliest point to decide to sell (judgement)
Days 42, 56 Optional Continue For stock that will sit in shops, warehouses or couriers

The schedule is dense in the first week because that is where your trial failed, and sparser after day 7 because slow changes don't need daily checks. If you have room for only one optional check, make it day 42 on the sealed set. For the weight log, use the method in the live guide testing reed diffuser performance over 30 days by weight rather than reinventing it: start and end weights, room temperature and humidity at each reading, fresh-reed swap at the midpoint.

1
Write down the failed trial. Oil and lot, base and lot, grams of each, mixing time, rest time, bottle, reeds, where it stood, and exactly what "cloudy" looked like on day 7: even haze, a cloud near the bottom, specks, or haze in only part of the liquid. Photograph it beside a bottle of plain base.
2
Decide on one change, or none. Arm A repeats the failed formula exactly, so you can see whether it fails again and when. Arm B changes one thing: a lower load (for example 15%), a different base, or a different oil. Not two things.
3
Make the bottles by weight. Each in-use bottle is its own 100 g batch (20 g oil + 80 g base for the 20% arms), three per arm in 120 ML bottles. Add one 120 g batch per arm split into three sealed 50 ML retains of about 40 g. For two arms at 20% that is 168 g of oil. Rest every batch 24–48 hours in a closed vessel before bottling.
4
Place them deliberately. In-use bottles together on one shelf at room temperature, away from sun and draughts. Sealed retains: one at room, one in a warm spot (for example a sunny windowsill or near a fridge vent, labelled), one in a cool spot (an air-conditioned room or a cool floor, labelled). If you can, put a cheap room thermometer at each spot and note the reading at every check.
5
Check on the days in the schedule. Same white card, same light, same time of day. Write one word per bottle: clear, hazy, line, layers, sediment. Weigh the in-use bottles: daily consumption = (start weight − end weight) ÷ days. Sniff blind on days 7, 14 and 28.
6
Swap reeds at day 14. In one in-use bottle per arm, replace the reeds with fresh ones. If throw recovers with fresh reeds, the reeds were clogging; if the liquid itself is hazy, fresh reeds won't change it.
7
Decide at day 28 against your rule. Sell only a formula that passes your written rule in every bottle and every spot. Keep its sealed retains going after launch.
Your sell rule (in-house — write it before day 0)
An example to adapt, not a standard. A formula may be sold only if, at every check to day 28: (1) all three in-use bottles and all three sealed retains are graded "clear" against your reference, with no line, layers, sediment or film; (2) colour change, if any, is no more than you would accept on a customer's shelf, judged against a fresh bottle; (3) no off-odour in a blind sniff against a fresh 100 g; (4) the in-use bottles' mean g/day sits inside the range you need for your stated bottle life, and no single bottle is far outside the other two; (5) the sealed retains have lost no measurable weight (the seal held). Fail any line in any bottle and the formula is not for sale.

Temperatures, honestly. You don't need a laboratory oven. You need three places that are reliably different and a thermometer reading at each check. A windowsill that gets afternoon sun and an air-conditioned bedroom are a sensible pair in most Indian homes. Note the readings, because "warm" in July and "warm" in December are different tests. Keep test bottles away from flames, stoves and heaters. And don't put a diffuser liquid in a freezer as a shortcut: a freeze–thaw result won't mean much for a product that never freezes.

The selling decision, and when to restart the clock

At day 28 there are three outcomes. Everything passed: the formula can be sold. Keep its sealed retains going and look at them again at day 42 and 56, and when the first production batch is a month old. Arm B passed and arm A failed again: the one thing you changed was the fix. Before you scale it, check that the change didn't cost you throw, using the in-use weights and sniff scores. Both failed: go back to the cause table, look at which bottles failed and where, and pick a different single change.

What restarts the clock

A stability pass belongs to one exact combination: this oil, this base, this % by weight, this mixing and rest routine, and these lots. Change any one and you are testing a new formula. That includes a new lot of the same oil or base. Lots differ, and a lot that clouds an existing formula is the subject of 8369. In practice: keep a sealed retain of every approved formula, and whenever a new lot comes in, make a 100 g batch with it and run it on the same schedule beside the retain before it goes into production.

Selling isn't the end of the test

Production bottles sit in packaging, in courier vans and on shop shelves, often warmer or cooler than your test spots. Keep two or three sealed bottles from every production batch, labelled with the batch number, and check them monthly. If a retain changes, you know before the complaints arrive and you know which batch it was. The documentation and finished-product checks to review before selling a self-formulated carrier are in 8359; the longer-term method for solvents that look compatible but separate later is 8350.

Don't do this: judge on day 2, test one bottle, change three things between versions, or count a pass in one spot as a pass. And don't buy 25 kg of base or a kilo of oil for a formula still in week two. The cost of 30 cloudy bottles sold and returned, in this worked example, is at least ₹5,310.00 in oil and bottles alone (20 g of Fresh Strawberries at the 500 gm rate and one Gold 120 ML bottle each), before base, reeds, labour or your reputation.

The CSI route and the batch after it passes

To be plain about what we sell: CSI does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol. The Isopropyl Alcohol Spray we list is a jar cleaner, never a diffuser ingredient. Our reed diffuser bases say "Blend with 10-30% fragrance oil" and to rest the blend 24–48 hours before bottling. In the text we captured they publish no composition, density, flash point, SDS, IFRA data, shelf life or stability data. So a CSI base in arm B runs the same four weeks as yours, and passes or fails on the same rule. For technical data and SDS, ask on WhatsApp; MSDS and IFRA documentation for our fragrance oils is available on request there too.

What we can supply for the test: both bottle sets, reeds for the in-use bottles, a comparison base, and a reference oil if you want to separate method from oil. Choose the base by your oil's family, matched only to each page's own positioning: Pure Performance (neutral), Softness (soft florals, powdery musks, light gourmand), Lift (floral, citrus, green, fruity) or Longevity (oriental, woody, resinous). Our HyperDiffusion Base is out of stock on 7 October 2026.

The purchase step, after day 28

Only once a formula passes, make the production batch with the same lots where possible. For 30 bottles at 100 g, that is 600 g of oil and 2,400 g of base at 20%. With Fresh Strawberries and a ₹1,099.00 CSI base, the liquid is about ₹246.64 a bottle (20 g at ₹3.54 a gram plus 80 g of base at a labelled 1.00 g/ml), materials only, excluding labour, freight, packaging and GST. The 30 bottles are three Gold 120 ML packs, ₹3,186.00, and 150 reeds at five each are one pack of 100 plus one of 50, ₹1,200.00. Keep one 50 ML pack back for batch retains.

Argued against our own interest: a test started on 7 October 2026 reaches day 28 on 4 November 2026, four days before Diwali (8 November). That is not enough time to make, rest, fill, label and ship a batch safely. Don't plan Diwali sales on a formula you are only now testing, with our base or anyone's. Christmas, 25 December 2026, is 79 days away: a 28-day test plus two weeks to produce still leaves 37 days.
Christmas 25 December 2026 is 79 days from 7 October 2026. Start the four-week test this week and you have a tested formula by early November and time to produce. Ask on WhatsApp to confirm stock of bottles, reeds and base for your production run, with a GST invoice.
WhatsApp a Christmas run

What to buy for the four weeks, and what to skip

Chosen on page statements, price and stock on 7 October 2026, not on performance. CSI publishes no stability or diffusion data, and nor do we.

1
bottles · the in-use set
Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML)
The in-use bottles should be the bottle you will sell in, because the glass, the cap and the size of the opening all affect what the liquid goes through in a week. The page describes clear glass with a gold-tone screw cap that "fits securely to prevent spills". It gives no neck size and says "Size: 50 and 100ml" beside a 120 ML listing, so measure your sample. It says nothing about washing. Dry the bottles fully before filling: water left from rinsing is a cause of haze that has nothing to do with your formula.
Pack Price Per bottle Use
120 ML Pack of 10 ₹1,062.00 ₹106.20 6 in-use bottles (3 per arm), 4 spare
50 ML Pack of 10 ₹826.00 ₹82.60 see card 2: sealed retains
In-use set: one 120 ML pack, ₹1,062.00. Buy 120 ML 10 — ₹1,062.00
2
bottles · sealed retains at three temperatures
Gold Reed Diffuser Bottle 50 ML (Pack of 10)
The sealed retains are where you see the formula alone, with no reeds and no evaporation. A small bottle filled close to the top leaves little air above the liquid. One 120 g batch per arm fills three 50 ML bottles at about 40 g each: one for room, one for a warm spot, one for a cool spot. The four left over become retains for the first production lot. Limitation: a screw cap is not a laboratory seal. Weigh the sealed bottles on day 0 and day 28; a sealed bottle that has lost weight was not sealed.
Pack Price Per bottle Use
50 ML Pack of 10 ₹826.00 ₹82.60 6 sealed retains of about 40 g, 4 spare for later lots
Retains for both arms: ₹826.00. Buy 50 ML 10 — ₹826.00
3
base · comparison arm B · neutral
Pure Performance Reed Base Oil
If your trial clouded in your own base, the most useful second arm is the same oil and % in a different base, on the same schedule. The page says "Blend with 10-30% fragrance oil", describes "stable blending" and "No added fixatives", and asks for a 24–48 hour rest before bottling. It publishes no stability data, shelf life, composition, density or SDS in the text we captured, so it runs the same four weeks as your base. Limitation: the 100g is one bottle; arm B needs the 500 ML.
Size Price Unit price Use
100g ₹325.00 ₹3.25 a gram too small: one arm needs 336 g of base
500 ML ₹1,099.00 ₹2.20 a ml arm B (336 g) with about 164 ml spare
Arm B: ₹1,099.00; base about ₹175.84 a bottle (labelled density). Buy 500 ML — ₹1,099.00
4
bases · if your oil fits a page's positioning
Softness, Lift or Longevity Base (500 ml)
Choose one only if your oil clearly fits a page's positioning: Softness for "soft florals, powdery musks, and light gourmand", Lift for "floral, citrus, green, and fruity", Longevity for "oriental, woody, resinous, and balsamic" (it also calls itself "Crystal clear and stable"). Those are the pages' descriptions, not stability results. The HyperDiffusion Base is out of stock on 7 October 2026. Two listings carry an old "ships 20th July" note in their web address, so confirm dispatch on WhatsApp.
Base Price Unit price Page positioning
Softness 500 ml ₹1,099.00 ₹2.20 a ml page: soft florals, powdery musks, light gourmand
Lift 500 ml ₹1,099.00 ₹2.20 a ml page: floral, citrus, green, fruity
Longevity 500 ml ₹1,296.00 ₹2.59 a ml page: oriental, woody, resinous, balsamic
Each is one arm; never three at once on a stability question. Buy Softness — ₹1,099.00
5
oil · a reference oil for the method
Fresh Strawberries
If you want to know whether your method or your oil is the issue, run a second oil through the same schedule. Fresh Strawberries' page gives "For reed diffusers, use 10-30%" and describes ripe strawberry and citrus zest, a sweet rose and honeydew melon heart, and a vanilla sugar base. That range is the supplier's, not a stability promise in your base. Argued against our own interest: an arm needs 84 g, so buy one 100 gm (₹377.60) or two 50 gm (₹424.80), not the 500 gm, until the four weeks are over.
Size Price Per gram 100 g bottles at 20% Use
15 gm ₹113.28 ₹7.55 0 too small
50 gm ₹212.40 ₹4.25 2 two packs = one arm
100 gm ₹377.60 ₹3.78 5 one arm (84 g)
500 gm ₹1,770.00 ₹3.54 25 after the formula passes
1 kg ₹3,540.00 ₹3.54 50 production; same per gram as 500 gm
One arm: 100 gm, ₹377.60. Buy 100 gm — ₹377.60
6
reeds · the in-use bottles only
Fiber Diffuser Reeds (Black)
Five reeds per in-use bottle, the same in every arm. The reeds turn a sealed liquid into an open one: the carrier evaporates, the remaining mix changes, and that is often when haze appears. CSI sells fibre reeds, not rattan; 20.3 cm, diameter not stated. The page claims "no swelling, no clogging", but your week-2 reed swap is the check. Argued against our own interest: above 50 the price per reed is flat at ₹8.00, so don't buy 500 to "save".
Pack Price Per reed Use
Pack of 25 ₹236.00 ₹9.44 too few for 6 bottles x 5
Pack of 50 ₹400.00 ₹8.00 30 reeds, 20 spare for a mid-test swap
Pack of 100 / 500 ₹800.00 / ₹4,000.00 ₹8.00 same per reed as 50: production only
Both arms: one pack of 50, ₹400.00. Buy 50 — ₹400.00

Skip for now: a 500-reed pack, a 500 gm or 1 kg of oil, more than one comparison base per arm, and the out-of-stock HyperDiffusion Base. Safety, plainly: fragrance oils and diffuser carriers can irritate skin and eyes, and flammability depends on the full formula. Keep test bottles away from flames, heat, children and pets, wear gloves when handling, and take hazard and labelling information from the SDS for each raw material. We give no legal advice.

The CSI principle
A stability pass is earned in weeks, not days.
Open and sealed bottles, three temperatures, one change per arm, four weeks minimum, and a fresh start whenever anything changes.
"Day 2 tells you the oil mixed. Day 28 tells you it will still be mixed on your customer's shelf."
— CandleMakingSuppliesIndia
Why trust this guide

CandleMakingSuppliesIndia sells ready-made reed diffuser bases, fibre reeds, bottles and fragrance oils, not DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol. This page still tells you that our base pages publish no stability data, that a CSI base runs the same four weeks as yours, and that a formula you start testing today shouldn't be sold at Diwali.

Every price was checked on the live store on 7 October 2026, with stock checked per size: the CSI HyperDiffusion Base is out of stock and is not offered; every item priced on this page is in stock on that date. Page wording is quoted and attributed.

The four-week minimum, the schedule, the storage spots and the sell rule are judgement and worked examples, labelled as such; no standard sets them for handmade diffusers. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our oils on request, message us on WhatsApp at +91 7397976926.

Frequently asked questions

How long should I test reed diffuser stability before selling?
A common working minimum, and our judgement, is about four weeks with no visible change in every bottle: in-use bottles with reeds at room temperature and sealed retains at room, warm and cool spots. If stock will sit in shops or couriers, or your first trial failed late, run six to eight weeks. There is no single official duration for handmade diffusers; set yours and write it down.
Why did my reed diffuser go cloudy after a week when it was clear at first?
Usually because the fragrance is near the limit of what the base holds and comes out slowly, or because the liquid changes as it evaporates or takes up moisture from humid air. Less often it is water in the bottle or the cool nights. Comparing sealed retains with open bottles, and warm with cool, tells these apart.
Is a cloudy reed diffuser still usable?
For your own use, maybe; for sale, treat it as a failed formula. Cloudiness means the liquid is no longer one stable solution, so the reeds may draw an uneven mix, and the customer sees a product that has changed. Make the next batch with one change and test it again.
Can I test reed diffuser stability faster by heating the bottles?
A warm spot is part of the test, not a shortcut. Warmth can speed some changes and slow others, such as haze that appears only when cool, so a hot-box result doesn't replace weeks of observation. Never heat diffuser liquid near a flame or on a stove.
Do I need to repeat stability testing for every fragrance?
Yes, for every oil–base–load combination you sell, and again when a new lot of oil or base arrives (8369 covers new oil lots). A pass with one oil says little about another, even in the same base.
Does CSI give a shelf life for its reed diffuser bases?
No shelf life or stability data appears on the base pages in the text we captured. Ask on WhatsApp for whatever technical data and SDS are available, and keep sealed retains of every lot you use so you can compare later stock against them.
Clear for two days, cloudy after a week
Four weeks, open and sealed bottles, room, warm and cool, one change per arm.
The CSI side of the test is ₹3,387.00: Gold 120 ML and 50 ML packs, a 50-pack of Black fibre reeds and Pure Performance 500 ML as the comparison arm. Send us a photo of the cloudy bottle on WhatsApp if you want help choosing the base.
Shop Gold bottles Ask which base to test
Editorial standards & sources
About this guide: part of CSI's cluster "Mixing, Resting, Filling and Testing Failures" (8361–8380) in the reed diffuser formulation series. It covers a 100 g trial that clouded after a week: what the change can mean, a cause table, an observation schedule with in-use and sealed bottles at three temperatures, a sell rule, when to restart the clock, and the CSI route.

Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Autumn, British Rose Fragrance Oil, Fresh Strawberries, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml). They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — snehal Chaudhary, Sooraj R, Uchu Omoide, M A. The reviews from Kavitha murthy, Ashwini are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.

Figures verified 7 October 2026, CSI live pricing: Gold Reed Diffuser Bottle 50 ML pack of 10 ₹826.00 (₹82.60 each), 120 ML pack of 10 ₹1,062.00 (₹106.20 each); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed); Pure Performance Reed Base Oil 100g ₹325.00 (₹3.25 a gram), 500 ML ₹1,099.00 (₹2.20 a ml); Softness and Lift Bases 500 ml ₹1,099.00; Longevity Base 500 ml ₹1,296.00 (₹2.59 a ml); CSI HyperDiffusion Base ₹1,499.00 (out of stock); Fresh Strawberries 15 gm ₹113.28, 50 gm ₹212.40 (₹4.25 a gram), 100 gm ₹377.60 (₹3.78 a gram), 500 gm ₹1,770.00 and 1 kg ₹3,540.00 (₹3.54 a gram). Per unit = price ÷ units, grams or ml, two decimals.

Non-price figures: the 100 g trial and the two-day and one-week timeline are the reader's (title). The 20 g + 80 g formula, five reeds, three in-use bottles and three sealed retains per arm, the check days, the 28-day minimum and the 42–56 day extension are judgement and worked examples; 1.00 g/ml is a labelled worked density. No official stability duration for handmade diffusers is implied. Diwali 8 November 2026 and Christmas 25 December 2026 are calendar facts. Costs are materials only and exclude labour, freight, packaging and GST.
Back to blog