Can Too Much Liquid Candle Dye Combined with a High Fragrance Load Contribute to an Oily or Unstable Candle Surface?

Can Too Much Liquid Candle Dye Combined with a High Fragrance Load Contribute to an Oily or Unstable Candle Surface?

 

Red liquid dye 15 gm ₹236.00 · in stock Red dye chips ₹250.00 · in stock CSI 468: ₹650.00 per kg · up to 13%
Oily coloured candles · dye, load or both?
Test your dose against an undyed twin before you change anything.
★★★★★
"Its concentrated color so a little amount gives the candle good pastel shade."
Shanu ShahVerified buyer · Sep 2025
Candle Dye Liquid
★★★★★
"Very good quality liquid dyes. Good vibrant colours in both luxury soy wax and coconut soy wax. I’m very happy with it."
Antara Srinivas IyerVerified buyer · Jun 2025
Candle Dye Liquid
★★★★★
"Candles dyes are very good quality and I loved the way they work with all kinds of waxes. Very good"
Antara Srinivas IyerVerified buyer · May 2025
Candle Dye Liquid
★★★★★
"It mixes very well and give you various shades like light to dark depending upon the amount of dye you add."
AshwiniSep 2025
Candle Dye Liquid
★★★★★
"Frangance is sooo good"
Sneha TamangVerified buyer · May 2025
Cinnamon Vanilla
★★★★☆
"Will buy more.. wonderful"
Punam SarmaVerified buyer · Dec 2024
Cinnamon Vanilla
★★★★★
"Its concentrated color so a little amount gives the candle good pastel shade."
Shanu ShahVerified buyer · Sep 2025
Candle Dye Liquid
★★★★★
"Very good quality liquid dyes. Good vibrant colours in both luxury soy wax and coconut soy wax. I’m very happy with it."
Antara Srinivas IyerVerified buyer · Jun 2025
Candle Dye Liquid
★★★★★
"Candles dyes are very good quality and I loved the way they work with all kinds of waxes. Very good"
Antara Srinivas IyerVerified buyer · May 2025
Candle Dye Liquid
★★★★★
"It mixes very well and give you various shades like light to dark depending upon the amount of dye you add."
AshwiniSep 2025
Candle Dye Liquid
★★★★★
"Frangance is sooo good"
Sneha TamangVerified buyer · May 2025
Cinnamon Vanilla
★★★★☆
"Will buy more.. wonderful"
Punam SarmaVerified buyer · Dec 2024
Cinnamon Vanilla
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. They are general reviews of the products named on each card, not assessments of the advice set out below. Wording is unedited.
✓ Prices verified 26 September 2026, stock checked per size ✓ MSDS and IFRA documentation on request on WhatsApp ✓ Raw materials only — CSI does not sell finished candles
CSI Diagnostics · Sweating · Dye and Load
A wax near its fragrance limit has little room for anything else, and no CSI dye page gives a dosage. So test your own dose: undyed and dyed, at 8% and 10%, side by side.
2×2
undyed/dyed × 8%/10%, two candles per cell, eight in all · CSI live pricing, September 2026
Quick answers — read this first
Can liquid dye plus a high fragrance load make a candle oily? It can plausibly contribute. A liquid dye adds something extra to a wax that is already carrying a lot of fragrance, and makers report dyed versions of a formula misbehaving where undyed ones don't. But it is a tendency, dose-dependent, and CSI's dye pages don't say what the dyes contain or how much to use, so the only honest answer for your candle is a test.

What's the test? A 2×2: undyed and dyed at your dose, each at 8% and 10% of total, two candles per cell, eight in all, surfaces scored on day 1, 3, 7 and 14. It separates a load effect, a dye effect and the two together.

How much dye is too much? No CSI dye page states a dosage, so there is no page figure to be over. Weigh your dose, test it, and don't raise it to chase a deep shade in opaque soy.

What about mica? Mica is a decorative pigment. The mica page says it "won't clog your wick", but many makers still keep it out of container wax because particles can collect at the wick; use it on surfaces, and keep it out of this test.
The short answer
The rule: test dye and load together, because either can be the cause and they can act together. Change only one of them at a time in production.
The grid: U8, U10, D8, D10 (undyed/dyed × 8%/10% of total), two each. Dye goes into one pot of wax for all four dyed candles, at your dose, weighed.
The reading: both 10% cells oily = load; both dyed cells oily = dye; only D10 oily = the combination; none = look elsewhere; all four = formula or process.
The cost: ₹2,052.64 of materials for eight candles (Cinnamon Vanilla in CSI 468, 150 g jars, Eco C1), plus four doses of your dye; excluding labour, freight, packaging and GST.
Reading the dye × load grid: four patterns Day-14 surface score (0 none · 1 film · 2 droplets · 3 pooling), worst of the two candles in each cell. Illustration, not results. 1 · Load effect 0 1 2 3 8% 10% Both lines rise together. Dye adds nothing: set the load. 2 · Dye effect 0 1 2 3 8% 10% Dyed sits higher at both loads. Cut the dose, or try chips. 3 · Dye × load 0 1 2 3 8% 10% Only dyed at 10% is oily. Dye at 8%, or undyed at 10%. 4 · Neither 0 1 2 3 8% 10% All four cells dry. The cause is elsewhere (3233). Undyed (U8, U10) Dyed at your dose (D8, D10) The eight candles behind the plots U8 × 2 undyed · 8% 12 g oil + 138 g wax U10 × 2 undyed · 10% 15 g oil + 135 g wax D8 × 2 dyed · 8% 12 g oil + 138 g dyed wax D10 × 2 dyed · 10% 15 g oil + 135 g dyed wax Worked example: Cinnamon Vanilla in Premium Coconut Soy Wax CSI 468, 150 g candles; load is % of total weight. Your dose is weighed once into the dyed pot for all four dyed candles. No CSI dye page states a dosage.
Four ways the 2×2 can come out, drawn as interaction plots on a 0–3 surface score (where both lines share a score, the dyed point is drawn just above). Parallel lines that rise together mean load; a dyed line sitting above the undyed one means dye; a single high point at dyed and 10% means the combination; four dry cells send you elsewhere. The scores are an illustration of the patterns, not results.
Straight answer
Can too much liquid candle dye combined with a high fragrance load contribute to an oily or unstable candle surface?
It can plausibly contribute, and it is worth testing rather than assuming either way. A candle near the top of its fragrance range has less margin, and a liquid dye adds material the wax has to hold as well; makers do report dyed versions of a formula turning oily where undyed ones stay dry. We can't tell you how much dye is "too much": no CSI dye page states a dosage or a composition. So test your own dose. Pour a 2×2 in the wax your problem candles used: undyed and dyed, each at 8% and 10% of total candle weight (inside the stated ceilings on either reading: 10% in CSI 468 or Chunks, 9% as the high rung in CSI 464), two candles per cell, and score the surfaces on day 1, 3, 7 and 14. If only the dyed 10% cell turns oily, it is the combination; if both dyed cells do, it is the dye; if both 10% cells do, it is the load; if none do, the cause is somewhere else.
One line: plausibly yes; an undyed-versus-dyed, 8%-versus-10% grid of eight candles tells you whether it is the dye, the load or the two together.
If you coloured by eye and don't know your dose: start again with a weighed one. Candle Dye Liquid | Red 15 gm is ₹236.00; every red size is in stock on 26 September 2026. The green and yellow liquids are out of stock on that date.
Buy red liquid 15 gm — ₹236.00

Can dye tip a high load over? What's plausible, what isn't

A wax near its fragrance limit has little room for anything else. That's the whole theory, and it is only a theory until your candles test it.

Sweating and oily surfaces tend to appear when a wax is carrying about as much fragrance as it will hold for that oil in your conditions; more oil past that point tends to show up on the surface rather than in the throw. A liquid dye is a small addition by weight, but it is an addition, and nobody outside the dye maker knows what its carrier is. So the plausible story is simple: at 8% the candle has margin and a dose of dye makes no visible difference; at 10% the margin is thinner and the same dose may be enough to show. That is a tendency makers report, not a law, and it may not happen at all with your dose.

Three things are less plausible than they sound. "Dye repels fragrance": there's no evidence we can point to for that as a general rule. "Any dye will do it": a few drops of a concentrated dye in a large pot is a very different dose from a heavy dose chasing a deep shade. "Mica is safer than dye": mica is a surface pigment, not a dye, and belongs in a different conversation. What is plausible, and worth testing, is dose × load.

Why the high rung is 10% here, not your old number
The grid must stay inside every stated ceiling on both readings. In Premium Coconut Soy Wax CSI 468 ("Up to 13%") or Luxury Soy Wax Chunks ("up to 13%"), 10% of total is 11.11% of wax, inside either way. In Luxury Soy Wax CSI 464 ("Up to 10%"), 10% of total is at the ceiling on one reading and past it on the other, so use 9% as the high rung. And never above the oil page's maximum: Cinnamon Vanilla states "Up to 13% load for candles". Basis maths: the load-basis hub.

What CSI's dye pages say, and what they don't

No CSI dye page states a dosage. That gap is the reason this test uses your dose.

We checked every dye and mica listing in the text we captured. None states a dosage, a usage rate or a maximum per kilo of wax, and none states what the dye is made of. What they do say is useful in other ways.

Dye and pigment pages · what is and isn't stated
As captured on 26 September 2026
Product Stated on the page Not stated Stock
Candle Dye Liquid | Red "Red dye in soy wax tends to produce lighter to medium shades of red. This is because soy wax is naturally opaque" Dosage, composition 15 gm, 50 ml, 100 gm in stock
Red Candle Dye Chips "dissolve evenly in wax"; "precise control over color intensity" Dosage, pack weight, composition In stock
White Mica (and the other micas) A shimmer pigment; the page says it "won't clog your wick" Dosage; whether it is meant to be mixed into container wax White in stock; some colours out
Liquid dyes, green and yellow Listed Dosage Out of stock on 26 September 2026

The red page's line about soy is the one to take seriously. In an opaque wax, colour reads lighter, so makers who want a deep red tend to add more, and dose creep is how a dye becomes a variable. One customer review of the purple liquid puts it the other way round: "Its concentrated color so a little amount gives the candle good pastel shade." That is one maker's experience with one colour, not a dosage, but it points the right way: find the smallest dose that gives the shade you'll accept, and record it by weight.

On mica, honestly: the mica page says it "won't clog your wick". Many makers still keep mica out of container wax, because fine particles can collect at the wick as the pool is drawn in (a tendency, and it varies). Use mica on surfaces and outside decoration, and if you have been mixing it into container wax, treat that as its own suspect: pour one undyed, mica-free candle beside your usual one. It has no place in the dye × load grid.

Oily coloured candles: pattern, suspect, check

Ranked in the order we would suspect them, most likely first. The ranking is editorial judgement; CSI publishes no failure statistics.

Differential table · coloured candles with an oily or unstable surface
Ranked most likely first (judgement) · each rule-in and rule-out is an observation
# Pattern Likely cause Rules it in Rules it out
1 Oily at your high load whether coloured or not The load, not the dye Undyed twins at the same load are oily too Undyed twins stay dry
2 Only the deep shades are oily; pastels of the same scent are fine Dose × load Oily only at high dose and high load Pastels oily as well
3 Only coloured candles are oily, at every load The dye or its dose Dyed cells oily at 8% and 10% Dyed 8% stays dry
4 Specks, uneven colour, a gritty surface Dye not fully dissolved, or mica mixed in Undissolved chips or particles visible in a sliced twin Uniform colour through the wax
5 Colour changing as well as oiliness Two problems: an oil that discolours, and a surface one The undyed twin changes colour too Only the dyed candle changes
6 Oily coloured and uncoloured, other scents too Method or storage Several scents and colours affected together One scent only

Rows 1 to 3 are what the grid separates. Row 6 is the non-load checklist; row 5 needs two separate answers, and the colour half is which oils tend to discolour. If you want the general droplet diagnosis before any of this, start at the cluster hub.

The dye × load 2×2, pot by pot

Two pots of wax, two loads each, two candles per cell. One variable per axis.

The grid pours four kinds of candle: U8 (undyed, 8%), U10 (undyed, 10%), D8 (dyed, 8%) and D10 (dyed, 10%), two of each. The worked example uses Cinnamon Vanilla in Premium Coconut Soy Wax CSI 468 and the 150 g jar; use your own oil, wax and jar, with the high rung adjusted to your wax's ceiling as above.

1
Weigh your dose once, for the whole dyed potWork out your usual dose per gram of wax from your batch sheet. The dyed pot feeds four candles and holds 546 g of wax; weigh four candles' worth of dye into it, not drops into each jar. A dose that is too small to weigh for one candle is often weighable for four. Write the dose down as grams of dye per kilo of wax so the result means something next time.
2
Melt two pots: undyed and dyedSame wax, same bag, same temperature. In CSI 468 the page states a pour temperature of 58–60°C; follow your own wax page's figure. Dissolve the dye fully in the dyed pot and check there are no specks before any oil goes in.
3
Split each pot into two loadsPer 150 g candle: 8% = 12 g of oil + 138 g of wax; 10% = 15 g of oil + 135 g of wax. Weigh each candle's wax from its pot into a pouring vessel, add its oil, stir the same way and for the same time for all eight.
4
Pour, code, store togetherPour all eight in one session in a mixed order, code the bases, and store them side by side on the shelf where your oily candles were kept, lids as you normally keep them.
5
Score on day 1, 3, 7 and 14Low-angle light, a fresh blotting-paper square pressed on each surface, and the cluster's 0–3 score: 0 none, 1 film, 2 droplets, 3 pooling (defined in the cycling protocol). Record the worse of the two candles in each cell. Score oil, not colour: a red candle hides a film better than a pale one, so blot every one.
6
Photograph at day 14, then burn one of eachPhotograph all eight together in daylight. Then, only if you plan to sell dyed candles at the high load, burn one candle per cell to the end of a full first burn and note flame and pool; heavy dye with heavy fragrance can affect a burn as a tendency, and that is a separate check (whether oily candles burn differently).
Bill of materials · dye × load grid · worked example
Cinnamon Vanilla · CSI 468 · Clear Glass Jar with Golden Lid (150 gram) · Eco C1 · Red liquid dye · CSI live pricing, 26 September 2026
Item Bought Used Cost of what is used
Cinnamon Vanilla 100 g ₹483.80 + 15 g ₹106.20 108 g (7 g left) ₹540.44
Premium Coconut Soy Wax CSI 468 1 kg + 500 g, ₹975.00 1,092 g (408 g left) ₹709.80
Clear Glass Jar with Golden Lid (150 gram) Pack of 10, ₹944.00 8 jars ₹755.20
Eco Candle Wicks, Thin (C1) 10 wicks, ₹59.00 8 wicks (or your own) ₹47.20
Candle Dye Liquid | Red 15 gm, ₹236.00 Four candles' worth of your dose Weigh it; depends on your dose
Eight candles, excluding dye ₹2,052.64

Costs exclude labour, freight, packaging and GST. The 100 g bottle alone is 8 g short of the grid, which is why the table adds a 15 g. Starting from nothing, the outlay is ₹2,804.00 including a 15 gm red; in practice you already own the oil, wax and dye that made the oily candles, and the new spend is jars and wicks at most. In the 150 g jar, CSI 468's 58–60°C pour sits well under the jar page's "Safe for hot pour up to 85°C".

Dye, load or both: reading the grid

Compare down the columns for dye, across the rows for load. The corner cell is where they meet.
Decision rule · dye × load grid at day 14
"Oily" = either candle in the cell scores 1 or more · read with the day-14 photographs
Oily cells What it points to What to change Purchase
None Neither dye nor this load, in this session Compare with how the oily batch was made and stored (3233, 3235) Nothing
U10 and D10 Load for this oil in this wax; dye adds nothing visible Lower the load; set it per oil (3231, 3224) Nothing
D8 and D10 The dye or its dose, at both loads Halve the dose and re-test the dyed pair, or try chips as a follow-up pair Chips ₹250.00, only for the follow-up
D10 only The combination: dose × load Pour coloured candles at 8% and keep 10% for undyed, or lower the dose at 10% Nothing
All four Formula or process, not dye The non-load checklist (3233); a lower-load pair Nothing yet
Cells disagree within a pair Noise near the edge Repeat that cell with two more candles Nothing
Any other pattern (D8 only, U10 only, three cells) No single reading Repeat the odd cells with two more candles each before changing dose or load Nothing

What does D10-only cost you to fix? If you drop coloured candles from 10% to 8%, each 150 g candle takes 3 g less oil: ₹14.51 of Cinnamon Vanilla at the 100 g price, ₹13.66 at the 1 kg price. Whether 8% still throws well enough for the product is a burn question for your own candles, not something the grid measures.

Mistake: reading the grid as "dye bad" because the red candles look worse. Why it misleads: colour changes how a surface reads in the light, and a dark candle can hide a film a pale one shows. Fix: judge by the blot and the score, not by eye, and read the undyed row first; if the undyed 10% is oily, the dye is not your first problem.

What not to buy for an oily coloured candle

Most of these fixes are a smaller dose, or a lower load, of things you already own.
What not to buy yet: a second colour of dye to "see if red is the problem": the grid tests your dose, not the colour. Dye chips (₹250.00) before the grid says the liquid is involved. Mica to replace dye in container wax: it is a surface pigment, and many makers keep it out of the melt. Vybar (₹156.00 for 50 g): its page says it "prevents mottling and sweating", but results vary by wax, it is more commonly associated with paraffin in our judgement, and adding it hides which variable caused the oil. A 100 gm dye bottle (₹900.00) before the dose is locked: cheaper per gram, but a test uses a tiny fraction of even the 15 gm.
When the right purchase is nothing: if you have undyed candles from the same formula and load on the same shelf, look at them before pouring anything. If they are oily too, the dye is not the first question; go to the load. And if the only oily candles were coloured with mica mixed into the wax, pour the next batch without it before testing anything else.

Dye, wax and oil for the grid

Four items: the liquid dye under test, the chip alternative for a follow-up, the wax that gives a genuine 10% cell, and the worked example's oil. Chosen on page statements, price and stock on 26 September 2026; CSI has no measured sweat or colour data, so nothing is ranked on performance. The oil table shows every size.

1
dye · liquid · the variable under test
Candle Dye Liquid | Red
The page describes how the colour reads: "Red dye in soy wax tends to produce lighter to medium shades of red. This is because soy wax is naturally opaque". It states no dosage anywhere in the text we captured, so the grid uses your dose, weighed. That line about soy matters here: chasing a deep red in an opaque soy wax is how doses creep up. Every size is in stock on 26 September 2026; the middle size is listed as 50 ml while the others are in grams, so confirm the fill on WhatsApp if the difference matters to you. Argued against our own interest: the 15 gm at ₹236.00 is the only size to buy for a test; the 100 gm is cheaper per gram (₹9.00 against ₹15.73) but a test uses a tiny fraction of either.
Size Price Per unit What it covers
15 gm ₹236.00 ₹15.73 per g the dyed pot for the grid; weigh how much of the bottle your dose uses
50 ml ₹472.00 listed in ml; confirm the fill on WhatsApp a colour line in production
100 gm ₹900.00 ₹9.00 per g the same colour at volume, once the dose is locked
Weigh the dose into the whole dyed pot, not drop by drop. Buy 15 gm — ₹236.00
2
dye · chips · the follow-up option
Red Candle Dye Chips
The page says the chips "dissolve evenly in wax" and give "precise control over color intensity". It doesn't state a dosage, the pack weight or what the chips are made of in the text we captured, so we won't claim a chip behaves differently from a liquid in your wax. That is exactly why it belongs in a follow-up pair and not in the first grid: if the grid says the liquid dye is involved, pour two 10% candles coloured with chips to a matching shade beside two with the liquid. In stock on 26 September 2026 at ₹250.00, ₹14.00 more than the 15 gm liquid. Limitation: matching a shade by eye is imprecise; photograph both in the same light.
Size Price Per unit What it covers
Single listing ₹250.00 pack size not stated in the text we captured a follow-up pair if the grid points at the liquid dye
One listing; buy only if the grid implicates the liquid. Buy chips — ₹250.00
3
wax · coconut-soy · room for a genuine 10%
Premium Coconut Soy Wax CSI 468 (Flakes Form) For Container Candles
The page states "Fragrance Load Up to 13%", "Melting Point 50°C – 53°C" and "Pour Temperature 58°C – 60°C", and claims "minimal frosting" and "excellent glass adhesion". It is the worked example's wax for one reason: 10% of total is 11.11% of wax, inside a 13% ceiling on either reading (11.50% of total if the 13% means wax weight), so the high-load cells are a fair test rather than a candle already at its limit. In CSI 464, whose page says "Up to 10%", use 9% as the high rung instead. Price is flat at ₹0.65 a gram at 500 g and 1 kg; the 5 kg and 10 kg are a little cheaper. Argued against our own interest: if your oily dyed candles were poured in another wax, run the grid in that wax; switching to CSI 468 for the test answers a different question.
Size Price Per unit What it covers
500 g ₹325.00 ₹0.65 per g with the 1 kg, the whole grid
1 kg ₹650.00 ₹0.65 per g most of the grid; it needs 1,092 g
5 kg ₹3,185.00 ₹0.64 per g production, a little cheaper per gram
10 kg ₹6,370.00 ₹0.64 per g production only
The grid: 1,092 g = ₹709.80. Buy 1 kg — ₹650.00
4
fragrance oil · spiced gourmand · the worked example
Cinnamon Vanilla
The page describes "cinnamon and clove top notes, vanilla bean and sugar middle notes, and cream and butter base" and states "Up to 13% load for candles" and "Vanillin content 2.5%". A red cinnamon candle is a natural place for a heavy dye and a high load to meet, which is why it is the worked example. The vanillin line matters for reading the grid: the undyed cells may yellow or brown over the 14 days, so score oil on the surface, not colour; colour is the discolouration question. Every size is in stock on 26 September 2026. The grid needs 108 g: the 100 g plus a 15 g (₹590.00) covers it with 7 g left. Limitation: its 13% page maximum doesn't lift any wax ceiling.
Size Price Per gram 150 g candles at 8% 150 g candles at 10%
15 g ₹106.20 ₹7.08 1 1
50 g ₹271.40 ₹5.43 4 3
100 g ₹483.80 ₹4.84 8 6
500 g ₹2,301.00 ₹4.60 41 33
1 kg ₹4,554.80 ₹4.55 83 66
The grid oil: 108 g = ₹540.44. Buy 100 g — ₹483.80
Christmas is 25 December 2026, 90 days from 26 September 2026. Red candles for the season can be tested now: a 14-day grid leaves 76 days to lock the dose and load and pour. Send us your grid result and candle count for a quote on wax, oil and dye with a GST invoice and a dispatch date.
WhatsApp a Christmas quote
The CSI principle
Weigh the dye as carefully as the oil. Then test the two together.
No page gives you a dye dosage, so your dose is the only one there is. Record it in grams, and let an undyed twin tell you whether it matters.
"A deep red in soy is usually bought with dose. Find out what that dose costs your surface before you pour a hundred."
— CandleMakingSuppliesIndia
Why trust this guide

CandleMakingSuppliesIndia sells the dyes, micas, wax and oil named here, and does not sell finished candles. This page still tells you that no CSI dye page states a dosage, that chips, mica, Vybar and bigger dye bottles are not the first purchase, and that the likeliest fix costs nothing but a smaller dose or a lower load.

Every price and per-gram figure was verified on CSI's live store on 26 September 2026; every size shown in a pick table is in stock on that date, and the tables are built to flag any size that is not. Dye, mica, wax and oil wording is quoted from the product pages; where a page is silent in the text we captured, we say so.

The cause ranking, the grid design, the decision rule and the 0–3 surface scale are editorial judgement; the interaction plots are an illustration of patterns, not results; CSI publishes no dye composition, dosage or sweat data. For bulk pricing, GST invoicing, and MSDS and IFRA documentation on request, message us on WhatsApp at +91 7397976926.

Frequently asked questions

Can candle dye cause sweating?
It can plausibly contribute, especially at a high fragrance load, and it depends on the dose. Test it: pour undyed and dyed candles at the same load side by side and compare the surfaces on day 1, 3, 7 and 14.
How much liquid dye should I use in soy wax?
No CSI dye page states a dosage. Use the smallest weighed dose that gives a shade you accept, recorded as grams of dye per kilo of wax. The red page notes that soy's opacity gives "lighter to medium shades", so don't raise the dose endlessly chasing depth.
Are dye chips better than liquid dye for container candles?
Not provably: neither CSI page states what the dye is made of or how much to use. If a test implicates your liquid dye, pour a follow-up pair coloured with chips to a matching shade and compare the surfaces.
Can I use mica powder in container candles?
The mica page says it "won't clog your wick", but many makers keep mica out of container wax because particles can collect at the wick. It is a decorative pigment; use it on surfaces and outside decoration rather than mixed into the melt.
Why is only my coloured candle oily when the uncoloured one is fine?
Either the dye dose or the dose combined with a high load. An undyed/dyed × 8%/10% grid of eight candles separates the two: if only the dyed high-load cell is oily, colour at the lower load or reduce the dose.
Does red candle dye look different in soy wax?
The red page says soy "tends to produce lighter to medium shades of red" because soy is opaque, while paraffin gives a wider range. Test your shade in your own wax before setting a dose.
Before you blame the dye
Eight candles: undyed and dyed, 8% and 10%.
Weigh your usual dose into one pot for four dyed candles, pour them beside four undyed ones at 8% and 10% of total, and score the surfaces on day 1, 3, 7 and 14. The pattern tells you whether to change the dose, the load or neither. Send us your result on WhatsApp if you want a second reading.
Buy red liquid dye — ₹236.00 Set up the grid on WhatsApp
Editorial standards & sources
About this guide: part of CSI's cluster on sweating, oil pooling and separation (3221–3240), for coloured candles that turn oily at a high fragrance load: what is plausible, what CSI's dye pages do and don't state, a ranked differential table labelled as judgement, a costed eight-candle dye × load grid with the dose weighed per pot, and a decision rule illustrated as interaction plots.

Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Candle Dye Liquid, Cinnamon Vanilla. They are general product reviews, not assessments of the diagnostic advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Shanu Shah, Antara Srinivas Iyer, Antara Srinivas Iyer, Sneha Tamang, Punam Sarma. The reviews from Ashwini are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.

Figures verified 26 September 2026, CSI live pricing: Candle Dye Liquid | Red 15 gm ₹236.00, 50 ml ₹472.00, 100 gm ₹900.00; Red Candle Dye Chips ₹250.00; White Mica 10 gm ₹57.82, 20 gm ₹115.64, 50 gm ₹270.22, 100 gm ₹529.82; Cinnamon Vanilla 15 g ₹106.20 (₹7.08/g), 50 g ₹271.40 (₹5.43/g), 100 g ₹483.80 (₹4.84/g), 500 g ₹2,301.00 (₹4.60/g), 1 kg ₹4,554.80 (₹4.55/g); Premium Coconut Soy Wax CSI 468 500 g ₹325.00, 1 kg ₹650.00, 5 kg ₹3,185.00, 10 kg ₹6,370.00; Clear Glass Jar with Golden Lid (150 gram) Pack of 10 ₹944.00; Eco Candle Wicks Thin (C1) 10 ₹59.00; Vybar 50 g ₹156.00. All in stock on 26 September 2026; the green and yellow liquid dyes, not used here, are out of stock on that date. Per gram = price ÷ grams; per jar or wick = pack price ÷ units; two decimals. Worked costs use the exact per-gram price, then round.

Non-price figures: load is a percentage of total candle weight (150 g at 8% = 12 g oil + 138 g wax; 10% = 15 g + 135 g); 10% of total is 11.11% of wax and 8% is 8.70%. Ceilings are as stated on the product pages (CSI 468 up to 13%, pour 58–60°C; Chunks up to 13%; CSI 464 up to 10%; Cinnamon Vanilla up to 13% for candles; 150 g jar hot pour up to 85°C) and are formulation limits, not regulatory limits. No CSI dye or mica page states a dosage. The grid design, cause ranking, decision rule, 0–3 surface scale and interaction plots are editorial judgement and illustration. Costs exclude labour, freight, packaging and GST. Christmas 25 December 2026 is a calendar fact.
Zurück zum Blog