How Do I Calculate Reed Diffuser Fragrance Oil Percentages Correctly by Weight, Convert Them into Bottle Filling Volumes and Avoid Common Formula Calculation Mistakes?
Aktie
How much oil for 1 kg of base at 20%? 250.00 g (Formula 2), not 200 g — that is 16.67%.
How do I convert to bottle volume? Grams per bottle = fill ml × the finished blend's measured density; then split at the load.
What are the common mistakes? Percent of base, ml as grams, averaging batches, 20% per oil. See the catalogue.
One definition that makes every calculation work
This series uses one definition of fragrance load, and so do CSI's base pages when they say a percentage "of total blend": load = fragrance oil ÷ (fragrance oil + base), by weight. Not oil ÷ base. Not oil millilitres ÷ bottle millilitres. Every formula below follows from that one line, and every mistake in the catalogue further down is a departure from it. Weight is used rather than volume for a practical reason: grams do not change with a liquid's density, with temperature or with how much clings to a jug, so a recipe written in grams can be repeated exactly, scaled exactly and checked against an IFRA limit exactly.
The second idea is just as important: decide which number is fixed before you choose a formula. Questions in this section start from four different places — a finished batch ("I want 500 g"), a fixed amount of base ("I have 2 kg of base"), a fixed amount of oil ("I have 250 g of rose"), or a mix that already exists ("I put 30 g into 100 g"). Each has its own formula. Using the right formula on the wrong starting number is the single most common error in reed diffuser maths, and it is invisible until you check the result with Formula 4.
The eleven formulas on one card
These are the canonical formulas of the 8701–8800 series, with the worked example each one is known by. Every post in this section uses them by name, so a sheet in one post can be checked against another. Copy the card; it is the whole section in one table.
| Formula | Use when | Formula | Worked example |
|---|---|---|---|
| 1 · Forward | The finished batch T is fixed | oil = T × L; base = T − oil |
100 g at 20% → 20.00 g oil + 80.00 g base |
| 2 · Fixed base | The base B is fixed | oil = B × L ÷ (1 − L); total = B ÷ (1 − L) |
1 kg base at 20% → 250.00 g oil, 1,250.00 g total (not 200 g) |
| 3 · Fixed oil | The oil O is fixed | total = O ÷ L; base = total − O |
100 g oil at 20% → 500.00 g blend, 400.00 g base |
| 4 · Actual load | You have a mix and want its % | L = O ÷ (O + B) |
30 g + 100 g = 23.08%; 200 g + 1 kg = 16.67% |
| 5 · Dilute | A blend is too strong | add base = T × L1 ÷ L2 − T |
800 g at 25% → 20%: add 200.00 g |
| 6 · Fortify | A blend is too weak | add oil = (L2 × T − O) ÷ (1 − L2) |
500 g at 15% → 20%: add 31.25 g |
| 7 · Mixing two batches | Two blends were combined | L = (T1·L1 + T2·L2) ÷ (T1 + T2) |
300 g at 15% + 700 g at 25% = 22.00% |
| 8 · Blends of oils | More than one oil | oil_i = total oil × share_i |
70:30 of 100 g oil = 70 g + 30 g |
| 9 · Volume ↔ weight | Bottles in ml, recipe in g | weight = volume × MEASURED density |
20 ml + 80 ml at 1.05 / 0.95 g/ml (examples) = 21.65% by weight |
| 10 · Losses | Allowances for loss and samples | gross = net ÷ (1 − loss) |
1,000 g net, 3% loss → 1,030.93 g |
| 11 · Scale resolution | How sure is the load? | worst-case ± (step ÷ 2) ÷ batch |
20 g + 80 g on a 1 g scale → 19.50%–20.50% |
Three groups are worth seeing. Formulas 1 to 3 are the same identity rearranged three ways, depending on whether the batch, the base or the oil is fixed: oil = total × L, base = total × (1 − L), so total = base ÷ (1 − L) = oil ÷ L. Formula 4 is the check that turns any pair of weights back into a load. Formulas 5, 6 and 7 are corrections — diluting, fortifying and combining — and each one exists because the intuitive shortcut gets it wrong: you cannot remove oil, adding oil also adds weight, and two percentages cannot be averaged unless the batches are the same size. Formulas 8 to 11 handle the real world: more than one oil, bottles measured in millilitres, losses and samples, and a scale that can only read so finely.
The canonical examples are chosen to make the traps visible. 1 kg of base at 20% takes 250 g of oil, not 200 g, because 200 g in 1,200 g is only 16.67%. 100 g of oil at 20% makes 500 g of blend with 400 g of base, not 500 g of base. 30 g of oil in 100 g of base is 23.08%, not 30%. Taking 800 g at 25% down to 20% needs 200 g of base; taking 500 g at 15% up to 20% needs 31.25 g of oil, not 25 g. If you can reproduce those five numbers from the card, you can do every calculation in the section. The posts that own each one are 1 kg of base to a final 20%, 100 g of jasmine at 20%, 30 g in 100 g, 800 g at 25% to 20% and 500 g at 15% to 20%.
Which formula? Start from what you already have
Read down the first column until it describes your bench. Each row names the formula and the section post that works it through on real numbers.
| You have or want | Fixed quantity | Formula | Worked through in |
|---|---|---|---|
| One bottle or batch of a stated size | the batch | 1 | 8701 · 8709 · 8717 |
| A stock of base to use up | the base | 2 | 8706 · 8710 · 8716 |
| A jar of oil to use up | the oil | 3 | 8703 · 8713 |
| A mix already made | both weights | 4 | 8705 · 8711 |
| A batch that is too strong | the batch and its load | 5 | 8787 · 8781 |
| A batch that is too weak | the batch and its load | 6 | 8783 |
| Two batches poured together | both batches | 7 | 8788 |
| Two or more oils | the total load | 8 | 8714 · 8715 |
| Bottles in millilitres | the fill volume | 9 | 8704 · 8712 · 8718 |
| A production run with losses | the net need | 10 | 8718 · 8771 |
| A small trial on a coarse scale | the scale step | 11 | 8719 |
Most real questions use two or three formulas in sequence. A ten-bottle order is Formula 9 (bottles to grams) then Formula 10 (allowances) then Formula 1 (split). A two-oil batch is Formula 1 then Formula 8. A rescue is Formula 4 (what did I make?) then Formula 5 or 6 (how do I fix it?). The order matters: convert units first, add allowances second, split third, round last.
From weight percentages to bottle filling volumes
Bottles are sold by volume — CSI's Gold Reed Diffuser Bottle as 50 ml and 120 ml — and filled to a line, but the formula is by weight. Formula 9 (volume to weight) connects them: grams in a bottle = fill volume × the finished blend's measured density. Then Formula 1 splits those grams at the load. CSI publishes no density for any base or oil and no fill line for its bottles; the 120 ml is the listing size and many makers fill a 120 ml bottle to 100–110 ml so the reeds do not push the liquid to the neck. The table shows grams per bottle and the oil in it at 20%, at three example densities.
| Bottle and fill | at 0.95 g/ml | at 1.00 g/ml | at 1.05 g/ml |
|---|---|---|---|
| Gold 50 ml · fill 45 ml | 42.75 g → 8.55 g oil | 45.00 g → 9.00 g oil | 47.25 g → 9.45 g oil |
| Gold 50 ml · fill 50 ml | 47.50 g → 9.50 g oil | 50.00 g → 10.00 g oil | 52.50 g → 10.50 g oil |
| Gold 120 ml · fill 100 ml | 95.00 g → 19.00 g oil | 100.00 g → 20.00 g oil | 105.00 g → 21.00 g oil |
| Gold 120 ml · fill 110 ml | 104.50 g → 20.90 g oil | 110.00 g → 22.00 g oil | 115.50 g → 23.10 g oil |
| Gold 120 ml · fill 120 ml | 114.00 g → 22.80 g oil | 120.00 g → 24.00 g oil | 126.00 g → 25.20 g oil |
The reverse conversion — a weight recipe turned into volumes, for anyone who must use a measuring jug — needs each liquid's own density, not the blend's. At example densities of 0.94 g/ml for the oil and 1.04 g/ml for the base, the 20 g + 80 g recipe is 21.28 ml of oil + 76.92 ml of base: neither 20 ml nor 80 ml. That is why mixing by volume drifts and weighing does not. Before mixing you can estimate a blend's density with the mixing rule 1 ÷ ρ = L ÷ ρoil + (1 − L) ÷ ρbase — at those examples about 1.0183 g/ml — but a real blend can differ a little, so measure it before filling a run.
Three posts take this further: converting a 25% weight formula to a 120 ml bottle volume for one bottle, the 150 ml coffee diffuser for the estimate-then-measure method, and ten 120 ml bottles from a measured density for a batch.
The mistakes catalogue: what people do and how far off it is
Each row is a calculation mistake that turns up again and again on real workbenches, with the canonical example, what it actually produces, the size of the error, the formula that fixes it, and the post that works it through. The errors are arithmetic, not opinions; the density examples are labelled.
| Mistake | Typical example | What it really gives | How far off | Fix | Post |
|---|---|---|---|---|---|
| Treating 20 ml : 80 ml as 25% | 20 ÷ 80 = 25% | 20.00% by volume | +5.00 points (a ratio, not a load) | Formula 4 | 8705 |
| Mixing by millilitres | 20 ml + 80 ml = "20%" | 21.65% by weight at example densities 1.05 / 0.95 | +1.65 points | Formula 9 | 8711 |
| Taking L of the base when the base is fixed | 1 kg base + 200 g oil | 16.67% | -3.33 points; 50.00 g of oil missing | Formula 2 | 8710 |
| Multiplying the oil by 1 ÷ L for base | 100 g oil + 500 g base | 16.67% | -3.33 points | Formula 3 | 8703 |
| Weighing the batch figure as base | 750 g base + 135 g oil (meant 750 g at 18%) | 15.25% | -2.75 points | Formula 1 | 8717 |
| Giving each of two oils the full load | 20% lavender + 20% vanilla | 33.33% | +13.33 points — over the pages' 30% | Formula 8 | 8714 |
| Checking IFRA against the blend's total | "20% vs the jasmine limit" | jasmine is really 14% of a 70:30 bottle | wrong comparison either way | Formula 8 | 8715 |
| Adding the percentage difference as oil | 500 g at 15% + 25 g oil "for 5% more" | 19.05% | -0.95 points (Formula 6 says 31.25 g) | Formula 6 | 8783 |
| Averaging two batches' percentages | 300 g at 15% + 700 g at 25% = "20%" | 22.00% | +2.00 points | Formula 7 | 8788 |
| Assuming 1 ml = 1 g for bottles | 10 × 120 ml = 1,200 g | depends on the measured density | a few per cent — often bigger than the loss allowance | Formula 9 | 8718 |
| Adding loss by multiplying | 1,000 g × 1.03 | 1,030.00 g vs 1,030.93 g | 0.93 g short | Formula 10 | 8771 |
| Trusting a whole-gram scale for 50 g trials | 10 g + 40 g on a 1 g scale | 19.00%–21.00% | ± 1.00 point | Formula 11 | 8719 |
Four patterns cover almost all of them. Percentage of the wrong total: of the base instead of the blend, of each oil instead of the fragrance, of a batch figure treated as base. Units: millilitres treated as grams, ratios treated as loads. Corrections done by intuition: adding the percentage difference, averaging percentages, multiplying for loss. And precision: a scale step that is large next to the oil portion. The fix in every case is to go back to oil ÷ total by weight and use the formula that matches what is fixed.
One complete worked example, start to fill
Here is every step on one order, so you can see the formulas working together. Twelve bottles of lavender reed diffuser in CSI's 120 ml Gold bottle, filled to 110 ml, at 20% in Softness Base — the base whose page names lavender. The finished blend's density was measured on a small pilot at an example 0.985 g/ml. Allowances are a labelled 20 g retained sample and a labelled 2% transfer and filling loss.
| Step | Formula | Working | Result |
|---|---|---|---|
| Grams per bottle | 9 | 110 ml × 0.985 | 108.35 g |
| Net for twelve | — | 12 × 108.35 g | 1,300.20 g |
| Gross batch | 10 | (1,300.20 g + 20.00 g) ÷ 0.98 | 1,347.14 g |
| Lavender oil | 1 | 1,347.14 g × 0.20 | 269.43 g |
| Softness Base | 1 | 1,347.14 g × 0.80 | 1,077.71 g |
| Rounded to a 0.1 g scale | 11 | 269.4 g + 1,077.7 g | load 20.00%, band 19.99%–20.00% |
| Check before pouring | 4 | 269.4 g ÷ 1,347.1 g | 20.00% |
| Ingredient | Formula | Target | Actual (g) | Tare checked | Initials |
|---|---|---|---|---|---|
| Softness Base | batch × 0.80, batch 1,347.14 g | 1,077.7 g | ______ | ☐ | ____ |
| Lavender Fragrance Oil | base actual × 0.25 (Formula 2 on the actual) | 269.4 g | ______ | ☐ | ____ |
| Check: actual load | Formula 4 | 20.00% ± scale band | ______ | ☐ | ____ |
| Fill weight per bottle | 110 ml × measured density | 108.35 g | ______ | ☐ | ____ |
| Retained sample | sealed clear vial, labelled | 20.00 g | ______ | ☐ | ____ |
| Left after filling | compare with the 2% allowance | about 26.94 g | ______ | ☐ | ____ |
Rest it 24–48 hours, run the clarity hold, then fill by weight. The purchase follows the batch: 1,077.71 g of base is 3 × 500 ml if the base is as light as an example 0.95 g/ml (the base's own density is not published), and 269.43 g of lavender plus a small allowance is 2 × 100 g + 1 × 50 g + 2 × 15 g — the cheapest listed way to cover it. The bottle-count purchasing section runs this at 50 to 1,000 bottles.
A calculated percentage is arithmetic, not proof
Everything above makes a load exact. None of it makes a load right. CSI's base pages give 10–30% fragrance of the total blend, call 20% "recommended" (Pure Performance) and suggest a "typical working blend" of 25%; those are the pages' guidance, and 15, 20, 25 and 30% are TEST loads. Three checks decide whether a formula is finished. First, the 24–48 hour rest every base page asks for. Second, a clarity hold, a labelled working practice: the blend in clear glass against a white card and a black card immediately, at 24 and 48 hours, at 7 days and after one cool-room night; a passing blend stays clear and single-phase, and a hazy one is stepped down five points or moved to the base whose page names the oil's family — never cleared with water, alcohol or heat. Third, the oil's IFRA limit: reed diffusers are listed under IFRA Category 10A in current IFRA amendments as commonly summarised in suppliers' guides, and the lower of the oil's 10A limit and the base page's 30% wins. With two or more oils, each oil's own share of the bottle is checked against its own certificate. CSI publishes no IFRA percentage for any oil — ask on WhatsApp for the certificate.
Then the formula meets a room. The measurement spine for any test is the same in every post of this series: weigh the bottle with its reeds at the same time each day for grams per day; days of life = fill grams ÷ grams per day; a blind room score on a house scale you write down first; reed photographs; the room's minimum and maximum temperature. CSI publishes no throw, evaporation or longevity data for any base, oil or reed. Finding the best load by throw, wicking, clarity and cost is the next section's capstone.
| Bottles | Formula | Purpose |
|---|---|---|
| C1, C2 (control) | your current or the page's recommended 20% | the reference every result is compared with |
| V1, V2 | the one change — a load, a base, an oil, a split, a reed count | the only difference from the control |
| Everything else | same base lot, oil pack, reeds, fill weight, room and schedule | keeps the comparison fair |
| If a bottle loses | Days to empty | Weeks |
|---|---|---|
| 1.5 g per day | 72.2 | 10.3 |
| 2.0 g per day | 54.2 | 7.7 |
| 2.5 g per day | 43.3 | 6.2 |
| 3.0 g per day | 36.1 | 5.2 |
The cost formula, by weight
Because the recipe is by weight, the liquid cost per bottle is one line: fill g × (L × oil ₹/g + (1 − L) × base ₹/g). CSI sells bases by the millilitre, so base ₹/g = price ÷ (500 × the base's density) — another place where a measured density matters. For the 108.35 g fill above, at 20% in Softness at an example 1.00 g/ml base density and the 100 g oil rates:
| Oil | Oil ₹/g | Oil per bottle | Base per bottle | Liquid per bottle |
|---|---|---|---|---|
| Citrus Lemon | ₹3.00 | ₹65.01 | ₹190.52 | ₹255.53 |
| Lavender | ₹5.40 | ₹117.02 | ₹190.52 | ₹307.54 |
| Dark Vanilla | ₹7.90 | ₹171.19 | ₹190.52 | ₹361.72 |
With lavender at the 500 g rate (₹5.24 per g against ₹5.40 at 100 g) the twelve-bottle example's liquid is ₹304.07 per bottle and ₹466.27 with the ₹106.20 bottle and 7 black reeds at ₹8.00. On CSI's catalogue per-gram breaks above 100 g are rare — most oils are priced about linearly from 100 g up and the reliable step is from 15 g to 50 g or 100 g — so buying bigger mostly buys convenience and stock security. Costing a formula at reader prices and comparing 15%, 20% and 25% carry the costing on.
The priced carts
Two carts, both priced with listed, in-stock CSI sizes. The first is the twelve-bottle worked example. The second is a starter calculation kit for anyone who wants to practise the method on small trials: two 100 g packs of Pure Performance Base (the one base sold by weight, ideal for trials), one oil at 15 g or 50 g, a pack of ten 50 ml Gold bottles, the scale and a 100 ml beaker.
| Item | Need | Buy | Price |
|---|---|---|---|
| Softness Base | 1,077.71 g | 3 × 500 ml | ₹3,297.00 |
| Lavender | 269.43 g + 5 g | 2 × 100 g + 1 × 50 g + 2 × 15 g | ₹1,560.04 |
| Gold Reed Diffuser Bottle 120 ml | 12 bottles | 2 × pack of 10 | ₹2,124.00 |
| Fiber Diffuser Reeds (Black) | 84 reeds | 1 × pack of 100 | ₹800.00 |
| CSI materials | ₹7,781.04 |
| Item | Why | Buy | Price |
|---|---|---|---|
| Pure Performance Base | trial base sold by weight | 2 × 100 g | ₹650.00 |
| Lavender | one oil for a 15% / 20% round | 1 × 50 g | ₹270.00 |
| Gold Reed Diffuser Bottle 50 ml | trial bottles | 1 × pack of 10 | ₹826.00 |
| Weighing Scale | resolution not published — check the display step | 1 | ₹354.00 |
| Silicon Measuring Beaker 100 ml | mixing and weighing vessel | 1 | ₹300.00 |
| Starter kit | ₹2,400.00 |
Notes. CSI does not list a reed diffuser starter kit, a sample pack or a calculator; the starter cart is built from single listed products. CSI does not sell DPG, Augeo, perfumer's alcohol, IPM, rattan reeds, reed stoppers or a 100, 150 or 200 ml diffuser bottle; base compositions and densities are not published. The reeds are fibre, 20.3 cm long, diameter not published; the reed page's 6–8 for a 50–100 ml bottle is guidance, not a result. Larger base quantities than 500 ml bottles are quoted on WhatsApp; no bulk price is published.
The decision rule
Stop at the first line that is true.
| If this is true | It means | Do this |
|---|---|---|
| Your recipe is in millilitres | Load unknown by weight | Buy nothing yet. Repeat the pours on a scale; Formula 4 |
| You are not sure which number is fixed | Formula choice is open | Batch → 1, base → 2, oil → 3, existing mix → 4 |
| Your two weights fail Formula 4 | A paper mistake | Find it in the catalogue before you pour |
| Bottles are in ml | Density needed | Measure the finished blend; Formula 9 |
| A run, not a trial | Allowances needed | Retained sample, then ÷ (1 − loss), once; round packs last |
| Weighing small portions on a coarse scale | Precision limit | Bigger trial, pre-blend, or a finer scale (Formula 11) |
| Formula is exact but untested | Arithmetic only | Rest, clarity hold to 7 days, IFRA 10A per oil, control round |
The rule ends where the next sections begin: fragrance load and performance for whether a load works, scaling a formula for moving it to production, bottle-count purchasing for orders and formula mistakes and corrections for rescues. The commercial pillars remain how much fragrance oil to add, which base to buy and how to make a 100 ml diffuser.
The CSI products on this page
| Size | Price | Per unit | Stock (15 Oct 2026) |
|---|---|---|---|
| 500 ml | ₹1,099.00 | ₹2.20 per ml · ₹2.20 per g at an example 1.00 g/ml | In stock |
| CSI HyperDiffusion Base™ (different product) | ₹1,499.00 | — | Out of stock — not offered |
| Size | Price | Per unit | Stock (15 Oct 2026) |
|---|---|---|---|
| 100 g | ₹325.00 | ₹3.25 per g | In stock |
| 500 ml | ₹1,099.00 | ₹2.20 per ml · ₹2.20 per g at an example 1.00 g/ml | In stock |
| Pack | Price | Per gram | Bottles at 21.7 g oil |
|---|---|---|---|
| 15 g | ₹105.02 | ₹7.00 | 0.7 |
| 50 g | ₹270.00 | ₹5.40 | 2.3 |
| 100 g | ₹540.00 | ₹5.40 | 4.6 |
| 500 g | ₹2,620.00 | ₹5.24 | 23.1 |
| 1 kg | ₹5,221.00 | ₹5.22 | 46.1 |
| Variant | Price | Per bottle | Stock (15 Oct 2026) |
|---|---|---|---|
| 50 ml · pack of 10 | ₹826.00 | ₹82.60 | In stock |
| 120 ml · pack of 10 | ₹1,062.00 | ₹106.20 | In stock |
| Item | Price | Note |
|---|---|---|
| Weighing Scale | ₹354.00 | Resolution not published — check the display steps |
| Silicon Measuring Beaker 100 ml | ₹300.00 | Mixing vessel; weigh, do not measure by its marks |
| Silicon Measuring Beaker 250 ml | ₹600.00 | For batches above about 100 g |
| CSI Pro Mixer (cordless handheld) | ₹349.00 | Optional; a clean glass rod or spoon also works |
Every question in this section
This is the capstone of "How much fragrance oil and base should I use?", the first of five sections in the series. Every post starts from a reader's exact grams or millilitres:
| What you are asking | What the post settles | Post |
|---|---|---|
| 100 ml at 20% when densities differ | The grams for one bottle (section hub) | 8701 |
| First 100 g trial: 15 + 85 or 20 + 80? | Which load to test first | 8702 |
| 100 g jasmine oil at 20% — how much base? | Fixed oil → base to buy | 8703 |
| 120 ml at 25% — weight % to bottle volume | Weight formula → fill volume | 8704 |
| 30 g oil + 100 g base: 30% or 23%? | Actual load of a mix | 8705 |
| 500 g base + lavender for a final 20% | Fixed base → oil to add | 8706 |
| 200 ml oud — weights before filling | Weights for a bottle CSI does not sell | 8707 |
| 50 ml mini — same % as 120 ml? | Retest at mini size | 8708 |
| Three 100 g samples at 15/20/25% | A load ladder's exact weights | 8709 |
| 1 kg ready-made base to a final 20% | Base weight vs batch weight | 8710 |
| 80 ml base + 20 ml oil — 20% by weight? | Volume mixing → true weight % | 8711 |
| 150 ml coffee diffuser, different densities | Estimating and measuring blend density | 8712 |
| 250 g rose oil — how many 100 ml bottles? | Oil-limited bottle count | 8713 |
| Two oils at a 20% total | Splitting one load between oils | 8714 |
| Jasmine–sandalwood 70:30, 500 g batch | A blend batch, gram by gram | 8715 |
| 2 kg base, use all of it at 22% | Fixed base at an odd load | 8716 |
| 18% in a 750 g trial — exact base | Weigh-to-actual correction | 8717 |
| 10 × 120 ml from measured density | Bottle volume → batch weight | 8718 |
| Kitchen scale for 50 / 100 / 500 g | Scale step → load error | 8719 |
| Section | Starts from | Hub |
|---|---|---|
| How much fragrance oil and base should I use? | your exact grams or millilitres | 8701 |
| Fragrance load and performance | a load that does not perform | 8721 |
| Scaling a formula from trial to production | a trial to scale up | 8741 |
| Bottle-count purchasing calculations | a bottle count to buy for | 8761 |
| Formula mistakes and corrections | a formula that went wrong | 8781 |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials, not finished diffusers. The easy answer is a calculator that hides the method. This page gives you the eleven formulas, the size of every common mistake and the honest limits — that we publish no density for our bases or oils, no fill line for our bottles and no IFRA percentage for our oils — so you can check any formula, ours or anyone's, without buying anything.
Diffuser bases, fibre reeds, Gold bottles, beakers, scale and mixer are CSI live pricing, re-checked 15 October 2026. Fragrance oils are CSI live pricing, pulled 24 September 2026, stock re-checked 14 October 2026. Every gram split, ml-to-g conversion, per-bottle cost and kit total on this page is computed and shown to two decimals so you can check it; densities are labelled examples, never CSI specifications.
Bottle counts per arm, clarity checkpoints, weighing schedules, room-scoring scales and loss allowances are labelled working practices, not industry standards — none exists for reed diffuser performance. The example densities (0.94, 0.95, 1.00, 1.04, 1.05 g/ml; measured 0.985 g/ml), the 45–120 ml fills, the 20 g retained sample, the 2% loss, the 0.1 g scale, the 7-reed count, two bottles per arm and the house scoring scale are labelled examples you replace with your own. For help building a test kit, bulk quotes, GST invoicing, MSDS or IFRA documents, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Want to Make a 100 ml Reed Diffuser with 20% Fragrance Oil — How Many Grams of Fragrance Oil and Reed Diffuser Base Do I Need When Their Densities Are Different?
- I Mixed 30 g Fragrance Oil with 100 g Reed Diffuser Base — Is My Fragrance Load 30% or Approximately 23%, and How Should I Calculate It Correctly?
- I Have 1 kg of Ready-Made Reed Diffuser Base — How Much Fragrance Oil Can I Add to Make a Final 20% Formula Without Confusing Base Weight with Total Batch Weight?
- I Made a Reed Diffuser Using 80 ml Base and 20 ml Fragrance Oil — Is This Equivalent to 20% Fragrance by Weight?
- I Have 250 g of Rose Fragrance Oil — How Many 100 ml Reed Diffusers Can I Make at a Tested 20% Fragrance Load?
- I Am Making Reed Diffusers with Two Fragrance Oils — How Do I Calculate the Individual Oil Weights While Keeping Total Fragrance Load at 20%?
- I Have 2 kg of Reed Diffuser Base and Want to Use All of It — How Much Fragrance Oil Should I Add to Produce a Final Formula with 22% Fragrance?
- I Want to Make 10 Bottles of 120 ml Reed Diffuser Liquid — How Do I Estimate the Total Batch Weight Using the Finished Formula's Measured Density?
- I Have Only a Digital Kitchen Scale — How Accurate Does It Need to Be for Making 50 g, 100 g and 500 g Reed Diffuser Trials?
- How Do I Find the Best Fragrance Oil Percentage for a Reed Diffuser by Comparing Throw, Wicking, Clarity, Stability, Evaporation and Raw-Material Cost?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Eco Candle Wicks, Premium Candle Wicking Needle and Bamboo Wick Holder. They are general product reviews, not assessments of the guidance set out here. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on the three reviews Judge.me recorded as verified — Monika Deep, Subhankar Roy and Sneha Tamang; the reviews from Ashwini, LJ and Lalitha Jagan are published but not recorded as verified, and carry no badge.
Figures re-checked 15 October 2026 and pulled 24 September 2026: Diffuser bases, reeds, bottles and tools — CSI live pricing, re-checked 15 October 2026: Pure Performance Base ₹325.00 / 100 g, ₹1,099.00 / 500 ml; Longevity Base ₹1,296.00 / 500 ml; Lift Base ₹1,099.00 / 500 ml; Depth Base ₹1,099.00 / 500 ml; Softness Base ₹1,099.00 / 500 ml; CSI HyperDiffusion Base™ ₹1,499.00 (out of stock); Fiber Diffuser Reeds (Black) ₹236.00 / 25, ₹400.00 / 50, ₹800.00 / 100, ₹4,000.00 / 500; Fiber Diffuser Reeds (White) ₹265.00 / 25, ₹450.00 / 50, ₹900.00 / 100, ₹4,500.00 / 500 (both 20.3 cm long); Gold Reed Diffuser Bottle 50 ml ₹826.00 / pack of 10, 120 ml ₹1,062.00 / pack of 10; Weighing Scale ₹354.00; Silicon Measuring Beaker 100 ml ₹300.00, 250 ml ₹600.00; CSI Pro Mixer ₹349.00. Fragrance oils — CSI live pricing, pulled 24 September 2026, stock re-checked 14 October 2026: Lavender Fragrance Oil ₹105.02 / 15 g, ₹270.00 / 50 g, ₹540.00 / 100 g, ₹2,620.00 / 500 g, ₹5,221.00 / 1 kg; Citrus Lemon Fragrance Oil ₹81.42 / 15 g, ₹170.00 / 50 g, ₹300.00 / 100 g, ₹1,420.00 / 500 g, ₹2,832.00 / 1 kg; Dark Vanilla Fragrance Oil ₹130.00 / 15 g, ₹410.00 / 50 g, ₹790.00 / 100 g, ₹3,840.00 / 500 g, ₹7,646.00 / 1 kg.
Non-price figures and assumptions: Fragrance load is a share of the total blend by weight (oil g = blend g × L; base g = blend g × (1 − L)). No density is published for any CSI base or oil: every ml-to-g conversion uses a labelled example density and shows ±5%; weigh 100 ml of your own blend to get yours. Canonical examples are the series addendum's (100 g at 20%; 1 kg base at 20%; 100 g oil at 20%; 30 g + 100 g; 200 g + 1 kg; 800 g 25%→20%; 500 g 15%→20%; 70:30; 20 + 80 ml at example densities 1.05/0.95). Example densities for the fill table 0.95, 1.00 and 1.05 g/ml; per-liquid examples 0.94 (oil) and 1.04 g/ml (base); worked example measured at an example 0.985 g/ml; water about 0.997 g/ml near 25 °C (general physical knowledge). Labelled working practices: 20 g retained sample, 2% loss, 0.1 g scale, 7 reeds, two bottles per arm, weighing on a fixed daily schedule, the house scale, clarity checks at 0, 24, 48 hours, 7 days and after a cool-room night. Costs use 100 g oil rates (lavender 500 g for the worked example) and Softness Base 500 ml at an example 1.00 g/ml. What CSI's base pages state (quoted as claims to test, not CSI test results): every base is a "Professional … Reed & Car Diffuser Base", crystal clear per its page, used at 10–30% fragrance of the total blend with a 24–48 hour rest before bottling. Pure Performance — neutral, "no added fixatives, no complex enhancements", for all families, "start at 10% … up to a maximum of 30%", "20% recommended", a "typical working blend 75% base + 25% fragrance", the example "for a 100 ml finished diffuser at 25%: 75 ml base + 25 ml fragrance oil", and "flip reeds after the first hour". Longevity — oriental/amber, woody, resinous/balsamic, spicy and gourmand; "avoid light florals, fresh citrus, aquatics — use Lift Base"; slower "cold diffusion"; "if clouding occurs, reduce fragrance percentage and retest"; "allow 2–3 hours before the first flip". Lift — floral, citrus, green and fruity. Depth — chypre, leather, smoky and rich gourmand; "stabilises tricky sweet and spicy fragrance oils". Softness — soft florals, powdery/musky, light gourmand. Reed page — 20.3 cm long; "for a standard 50–100 ml diffuser bottle, 6–8 reeds gives a good balance". Bottle page — variants 50 ml and 120 ml (its text says "50 and 100ml"); neck diameter, fill line and any reducer are not stated. CSI publishes no composition, density, viscosity, evaporation rate, flash point or shelf life for any diffuser base; no throw, evaporation or longevity result for any base, oil or reed; no reed diameter; no bottle neck size or fill line; no IFRA percentage for any oil; and no bulk base price. The five bases are told apart only by what their pages say they are for — never by a measured result. IFRA: reed diffusers are listed under Category 10A in current IFRA amendments as commonly summarised in suppliers' guides; read the Category 10A limit on the certificate for your oil, which CSI provides on WhatsApp request. Material costs exclude labour, packaging, freight and GST. Diwali 2026 falls on Sunday 8 November, 24 days after this page was written on 15 October 2026.