I Am Making 100 Reed Diffusers of 120 ml Each — How Do I Calculate Base Requirements When the Carrier and Fragrance Oil Have Different Densities?

I Am Making 100 Reed Diffusers of 120 ml Each — How Do I Calculate Base Requirements When the Carrier and Fragrance Oil Have Different Densities?

 

Reed bases 500 ml ₹1,099.00 (₹2.20 a ml) Gold 120 ML ₹106.20 a bottle Fibre reeds ₹8.00 each from 50
100 × 120 ml · two densities · how much base
Grams per bottle = 120 ml × blend density; base to buy = 80% of the grams ÷ base density. Weigh, then count bottles.
★★★★★
"Nice product"
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML)
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
★★★★★
"Quality is good with good fragrance"
Avanthi CheeliVerified buyer · Nov 2025
Citrus Lemon Fragrance Oil
★★★★★
"Fresh and soothing"
Yashvi ShahVerified buyer · Jul 2025
Blue Ocean Fragrance Oil
★★★★☆
"Love the quality and scent notes. The lavender scent that I bought is selling fast"
Renam DhoundiyalVerified buyer · Apr 2026
Woody Oud Fragrance Oil
★★★★☆
"Good product and I fully satisfaction with my end result"
Urvashi PatelVerified buyer · Aug 2026
Sacred Sandal Ember Fragrance Oil
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. They are general reviews of the products named on each card, not assessments of the advice set out below. Wording is unedited.
✓ Prices verified 7 October 2026, stock checked per size ✓ GST invoice; MSDS and IFRA documentation for oils on request ✓ We do not sell DPG, DPM, IPM or Augeo-type solvents
CSI Reed Diffusers · Density Maths
A 120 ml fill is a volume; your formula is a weight. Convert with the density of the finished blend, split oil and base by weight, then turn the base back into 500 ml bottles with its own density.
21 × 500 ml
of base for 100 × 120 ml at 20% with a 3% allowance, at worked densities (oil 1.05, base 0.95 g/ml) · ₹23,079.00 · CSI live pricing, October 2026
Quick answers — read this first
How do I calculate base for 100 reed diffusers of 120 ml when the oil and base have different densities? Convert the fill to grams with the blend's density, then split by weight. With worked densities of 1.05 g/ml for the oil and 0.95 for the base, a 20% blend is about 0.968 g/ml, so one 120 ml fill is 116.21 g: 23.24 g oil + 92.97 g base, which is 97.86 ml of base.

How much base for all 100? 11,621.4 g of blend without losses; with a worked 3% allowance, 11,970 g: 2,394 g of oil and 9,576 g of base. At 0.95 g/ml that base is 10,080 ml, so 21 bottles of 500 ml.

Why not just take 20% of 120 ml? By volume you'd get 21.6% by weight, not 20%. Treating 1 g as 1 ml instead overfills each bottle to 123.9 ml.

What does the run cost at CSI? 21 × 500 ml of Pure Performance or Lift (₹23,079.00), 2,500 g of Bergamot Amber as five 500 gm (₹13,590.00), 100 Gold 120 ML bottles (₹10,620.00) and 600 reeds (₹4,800.00): ₹52,089.00, ₹520.89 a diffuser in materials.
The short answer
The rule: grams per bottle = fill ml × blend density. Oil = 20% of those grams, base = 80%, base ml = base grams ÷ base density.
The blend density: measure it. Weigh 50 ml of a real 100 g test blend. The formula 1 ÷ (0.2 ÷ oil density + 0.8 ÷ base density) is an estimate that assumes volumes simply add.
The run: 11,970 g of blend with a 3% allowance = 2,394 g oil + 9,576 g base = 10,080 ml = 21 × 500 ml at the worked densities.
The honesty: no CSI base or oil page in our data states a density, and CSI sells no DPG, DPM, IPM, Augeo-type solvent or perfumer's alcohol. Every density here is a worked example until you weigh yours.
One 120 ml fill, three ways to count it Worked densities: oil 1.05 g/ml, base 0.95 g/ml. Measure yours. the 120 ml fill line oil base A · 20% by volume 24 ml oil = 25.2 g 96 ml base = 91.2 g load by weight 21.6% oil base B · "1 g = 1 ml" 24 g oil = 22.86 ml 96 g base = 101.05 ml 123.9 ml: overfills oil base C · blend density 23.24 g oil = 22.14 ml 92.97 g base = 97.86 ml 120.0 ml at 20.0% 100 bottles with method C, plus a 3% allowance 11,970 g blend 2,394 g oil 9,576 g base 10,080 ml base ÷ 0.95 21 × 500 ml to buy Without the allowance the base is 9,786 ml: 20 bottles, with only about 2% to spare. Method C assumes volumes add. Weigh 50 ml of a real 100 g test blend to confirm.
One 120 ml fill counted three ways with worked densities (oil 1.05 g/ml, base 0.95 g/ml). A takes 20% by volume: it fills the line but the load by weight is 21.6%. B treats a gram as a millilitre: 20 : 80 by weight, but 123.9 ml that overfills the mark. C uses the blend density: 116.21 g per bottle, exactly 120 ml at exactly 20%. Below, method C for 100 bottles with a 3% allowance gives 21 bottles of 500 ml; without the allowance it is 20, with almost nothing to spare. Densities are worked examples, not CSI data.
Straight answer
I am making 100 reed diffusers of 120 ml each. How do I calculate base requirements when the carrier and fragrance oil have different densities?
Work in grams, and use the density of the finished blend to get there. A 120 ml fill weighs 120 × the blend's density; 20% of that weight is oil and 80% is base; and the base you buy in millilitres is its grams divided by its own density. With worked densities of 1.05 g/ml for the oil and 0.95 for the base, the blend comes out at about 0.968 g/ml, so each bottle holds 116.21 g: 23.24 g of oil and 92.97 g of base (97.86 ml). For 100 bottles plus a 3% allowance for filling losses and retains, mix 11,970 g: 2,394 g of oil and 9,576 g of base, which is 10,080 ml, or 21 bottles of 500 ml. Without the allowance it would be 20 bottles with about 213.6 ml spare, too tight to bet a run on. Don't trust the worked densities: mix one 100 g test blend, weigh 50 ml of it, and weigh 100 ml of the base. Those two numbers replace every assumption on this page.
One line: grams per bottle = 120 ml × blend density; base ml = 80% of the grams ÷ base density; at the worked figures that is 10,080 ml with 3% spare, 21 × 500 ml.
The base for 100 × 120 ml, priced at the worked densities: 21 × Pure Performance 500 ML or Lift Base = ₹23,079.00, or 21 × Longevity = ₹27,216.00. Re-count after you weigh 100 ml: at 1.00 g/ml it would be 20 bottles (₹21,980.00). In stock on 7 October 2026.
Shop reed diffuser bases

One 120 ml fill, three ways to count it

Volume is what the customer sees. Weight is what the formula is. Density is the exchange rate.

Your run, restated exactly: 100 reed diffusers, 120 ml each, a carrier and a fragrance oil that don't weigh the same per millilitre, and a 20% fragrance formula (this series' default, by weight; use your own percentage in the same steps). Before any rupee is spent, settle what "120 ml" means. If it is the liquid you promise on the label, the bottle must hold 120 ml plus room for six reeds and some headspace. The Gold 120 ML page states no brim capacity (it also says "Size: 50 and 100ml"), so fill one bottle with water by weight to the shoulder and check. If it can't take 120 ml with reeds in, your real fill is less, and every number below scales down with it.

Now count one fill three ways. The densities are worked examples: oil 1.05 g/ml and base 0.95 g/ml. Fragrance oils vary, some above and some below 1 g/ml, and no CSI oil or base page in our data states one.

One 120 ml fill at 20%, worked densities
Oil 1.05 g/ml, base 0.95 g/ml · illustrative · method C assumes volumes add
Method Oil Base Volume in the bottle Load by weight Base ml for 100 bottles (no loss)
A · 20% by volume 24 ml = 25.2 g 96 ml = 91.2 g 120 ml 21.6% 9,600
B · "1 g = 1 ml" 24 g = 22.86 ml 96 g = 101.05 ml 123.9 ml (+3.9) 20.0% 10,105
C · blend density 23.24 g = 22.14 ml 92.97 g = 97.86 ml 120.0 ml 20.0% 9,786.4

Method A gets the volume right and the formula wrong: with a dense oil it puts 21.6% into a product your batch sheet calls 20%, and a light oil would push it the other way. Method B gets the formula right and the volume wrong: 3.9 ml too much per bottle, which is the headspace you needed for the reeds, and about 319 ml more base over the run than method C needs. Method C is the only one that hits both. It rests on one estimate, the blend density: 1 ÷ (0.2 ÷ 1.05 + 0.8 ÷ 0.95) = 0.9684 g/ml. That formula assumes the two liquids' volumes simply add. Real blends can shrink or swell slightly on mixing, which is why you weigh a real blend. The general case for formulating by weight, and how to compare bases fairly when their densities differ, is the fair-formulas-by-weight post; this page is the production arithmetic.

Don't do this. Don't fill by a mark on the glass and assume the formula takes care of itself. Don't use the oil's density for the whole blend, or the base's. And don't let a supplier's "500 ml" become "500 g" in your spreadsheet. Ours doesn't state a density, and neither do the pages we checked. Every one of those shortcuts moves either your load or your bottle count, and you won't see which until the run is mixed.

From one bottle to 100: the batch sheet

Multiply the bottle, then add what the bench always takes.

A hundred fills of 116.21 g is 11,621.4 g of blend. Production always loses some: liquid left in the mixing vessel and funnel, the bottle you overfill and correct, and the retained samples you should keep from every batch. A worked 3% allowance covers that for a run this size; measure your own losses on the first run and adjust.

Batch sheet · 100 × 120 ml at 20% · worked densities
Weights are the recipe · millilitres only for buying base · replace every density with your own measurement
Line Calculation Result
Blend per bottle 120 ml × 0.9684 g/ml 116.21 g
Blend for 100 100 × 116.21 g 11,621.4 g
With 3% allowance × 1.03 11,970 g
Oil (20%) 11,970 × 0.20 2,394 g
Base (80%) 11,970 × 0.80 9,576 g
Base to buy, in ml 9,576 ÷ 0.95 10,080 ml
500 ml bottles 10,080 ÷ 500, rounded up 21 (420 ml spare)
Without the allowance 9,786.4 ml ÷ 500 20 bottles, 213.6 ml spare (2.2% of need)

The last two rows are the decision. Twenty bottles cover the run only if your losses stay under about two per cent, and for a first run of 100 they probably won't. Buy 21. If your measured base density is higher than the worked 0.95, the count may drop back to 20; if lower, it may rise. The next table shows how far.

How base density moves the bottle count
Oil fixed at a worked 1.05 g/ml · 20% · 100 × 120 ml · 3% allowance · worked examples
Base density Blend to mix Base ml 500 ml bottles
0.90 g/ml 11,451 g 10,179 ml 21
0.95 g/ml 11,970 g 10,080 ml 21
1.00 g/ml 12,479 g 9,983 ml 20
1.05 g/ml 12,978 g 9,888 ml 20

Notice two things. Lighter bases need more millilitres for the same grams, but they also make the blend lighter, so a 120 ml fill weighs less; the two effects partly cancel, which is why the count only moves by a bottle across a wide range. And the total grams you mix change with density too, so the oil you need changes: always recompute the oil from the measured blend, never carry it over from a different base. A related live guide works the simpler case of 100 bottles of 100 ml at 20% (how much base for 100 bottles of 100 ml); use it to cross-check your own sheet.

Measuring the three densities you actually need

Three weighings, ten minutes, and the worked examples on this page become your numbers.

You need the base's density (to buy it), the oil's density (to check the estimate) and, most of all, the blend's density (to fill by weight). All three come from the same method: tare a beaker on your scale, pour a measured volume, weigh it, divide. CSI's Silicon Measuring Beaker 100 ML (₹300.00) has a printed scale, but check that scale once against 100 g of water at room temperature before trusting it. CSI's Candle Making Weighing Scale (₹354.00) states no capacity or resolution, so confirm yours reads to at least 0.1 g for this job.

1
BasePour 100 ml of base into the tared beaker; grams ÷ 100 = g/ml. Do it for each base you might use. This is the number that turns grams into 500 ml bottles.
2
OilIf you have enough oil to spare, 50 ml of it the same way. You don't strictly need it, but it lets you check the estimate.
3
BlendMix a labelled 100 g test batch by weight (20 g oil + 80 g base), stir to clear and rest 24–48 hours as the base pages advise. Weigh 50 ml of it; grams ÷ 50 = the blend density. Use this, not the formula, for grams per bottle.
4
Same temperatureLiquids expand when warm. Measure all three at the room temperature you'll fill at, and note it. In a Pune summer and a Delhi winter, the same 120 ml can weigh slightly different amounts, which is another reason to fill by weight.
5
Record itWrite the three densities, the date, the temperature and the lot numbers on the batch sheet. When the next lot arrives, weigh 100 ml again before you order or mix. Checking a new lot properly is covered in incoming-lot QC.

If the measured blend density differs from the estimate, believe the measurement. If it differs a lot, that is also a signal: a blend that changes volume noticeably on mixing deserves a closer look for clarity and stability before you mix 12 kg of it. For checking a new base lot when it arrives, see incoming QC for a new lot.

Why a 100-bottle run comes up short: the cause table

The arithmetic is easy. These are the ways the run still ends short, overfilled or at the wrong strength.
Cause table · base runs out, bottles overfill, or the load drifts
Cause → what you'd see → discriminating check → fix · tendencies, not certainties
Cause What you'd see Discriminating check Fix
Solvent / base choice Base runs out early or bottles are left over after switching base Weigh 100 ml of the base actually used vs the one you planned with Recount bottles from the measured density of the base you'll mix
Oil character and load Load "drifts" between oils; one oil fills more bottles than another Measure each oil's blend density; check the batch sheet's basis (weight, not volume) Recompute oil grams per oil; keep 20% by weight for every scent
Bottle and fill Overflow when reeds go in; uneven levels on the shelf Water test to the shoulder with six reeds inserted Set the fill in grams from that test; fill on a scale, not to a line
Reeds Level drops before the cap goes on; reeds soak up liquid in storage Weigh a filled bottle before and after inserting dry reeds Ship reeds separately, as many makers do, and count reed uptake in the fill
Environment The same "120 ml" weighs differently on a hot afternoon Measure density at two room temperatures Fill by weight; record the room temperature on the batch sheet
Measurement error Totals don't reconcile; base short by a few hundred ml Check the beaker scale with water; check the scale with a known weight Calibrate once; tare every container; one scale for the whole run
Process losses Final bottles short; nothing left for retains Weigh what's left in the vessel and funnel after the first run Set your own allowance from that weight (worked: 3%)

Three of these rows are about measuring, not formulating, and they are the commonest reason a careful spreadsheet runs short. The reed row matters for 120 ml in particular: a full bottle plus six reeds plus a cap is a tight fit, and a bottle that weeps in the courier box is a closure problem or a liquid one to diagnose, not a formula fault. If bottle-to-bottle levels vary across the run, checking mixing and filling consistency is the next read.

The test before the run

One hundred bottles is too many to mix on an untested base. Three bottles per arm is enough to find out.

If the base and oil are already proven together in your product, skip to the purchase; the density step above is the only test you need. If not, run the series' controlled test first. Two arms, for example Pure Performance and Lift, or a CSI base against the carrier you use now; each arm three Gold 120 ml bottles, each filled from its own labelled 100 g batch at 20% by weight; six black fibre reeds per bottle; one shelf, one room; 30 days. CSI does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol, so a solvent arm is your own supplier's.

Test method and your pass rule (in-house, labelled)
Weigh each bottle on day 0 and every 2–3 days to day 30; consumption = (start − now) ÷ days. Keep one sealed, reedless bottle as a scale check. Sniff blind by bottle code at a fixed distance and time (2 m is a sensible in-house choice), scored 1–5. Stability: check each batch against a light after the 24–48 hour rest and at day 30. Then verify the fill: fill three bottles at 116.21 g each (348.6 g in all) and insert reeds; no overflow, no weeping when tilted. Example pass rule, to adapt: all bottles clear at day 30; mean consumption inside your target window (worked: 120 ml lasting 60–75 days); blind sniff at least equal to your current product; three bottles agreeing more closely than the difference claimed. Figures are illustrative, not CSI test data.

Safety for the run, stated plainly: keep diffusers and bulk liquids away from flames and heat; avoid skin and eye contact; keep finished products away from children and pets. Flammability, storage and labelling depend on the full formula. Get the SDS for your oil and for any solvent you supply yourself; CSI base pages publish no SDS in the text we captured, so ask us on WhatsApp for whatever technical data exists. None of this is legal advice.

Argued against our own interest: if your current carrier passes this test and ours doesn't beat it, buy only bottles and reeds from us. And if your base is already proven, don't buy a 100g Pure Performance sample just to measure density: 100 ml from the bottle you already have does the job for free.

The purchase: packs, rupees and what's left

Count base in 500 ml bottles, oil in packs, bottles in tens, reeds in hundreds.
Purchase sheet · 100 × 120 ml at 20% · CSI live pricing, October 2026
Worked densities · excludes labour, freight, packaging, labels and GST · all lines in stock on 7 October 2026
Line Need Buy ₹ Left
Base (Pure Performance or Lift) 10,080 ml 500 ml × 21 ₹23,079.00 420 ml
Oil (Bergamot Amber, worked) 2,394 g 500 gm × 5 ₹13,590.00 106 g
Gold 120 ML bottles 100 Pack of 10 × 10 ₹10,620.00 0 (11 packs for spares: ₹11,682.00)
Fibre reeds (Black) 600 500 + 100 ₹4,800.00 0
Total ₹52,089.00 ₹520.89 a diffuser

Three notes on the packs. Base: Longevity instead would be ₹27,216.00 for the same 21 bottles. Oil: on this oil, as on several in our range, the 1 kg costs a little more than two 500 gm, so 2,500 g is cheapest as five 500 gm. Reeds: white reeds for the same 600 are ₹5,400.00. What a dearer base adds per bottle, and whether it earns it, is the extra cost per 120 ml diffuser. If you're scaling a formula that worked at 100 g, mixing order, vessel and retained samples are covered in scaling a 100 g formula to 10 kg; for a run built around a fixed quantity of oil instead of a fixed bottle count, the 1 kg of Jasmine calculation.

CSI publishes no lead times and lists no base size above 500 ml, and promises no lot continuity. For 21 bottles, ask on WhatsApp whether they can come from one lot; if not, weigh 100 ml from each lot and keep lots separate in the batch record.

Diwali is 8 November 2026, 32 days from 7 October 2026. A proven formula can make a 100-bottle festive run in that window if the materials arrive early: measure densities the day they land, mix, rest 24–48 hours and fill by weight. An unproven one can't fit a 30-day test in as well, so aim that run at Christmas (25 December 2026) instead. Message us your counts for stock and dispatch, with a GST invoice.
WhatsApp the 100-bottle order

The CSI items for this run

Chosen on page statements, price, pack sizes and stock on 7 October 2026, not on performance: CSI publishes no diffusion or density data. Family positioning is each page's own description. Each card says when not to buy.

1
base · neutral · the arm to measure first
Pure Performance Reed Base Oil (100g / 500 ML)
The page calls it "crystal-clear", made for "smooth even wicking", with "No added fixatives" and "Blend with 10-30% fragrance oil". It is the one CSI reed diffuser base sold in grams as well as millilitres, which makes the 100g size handy for the test batch that measures your blend's density. Limitation: no density is stated for either size, so the 21-bottle count is only as good as the worked 0.95 g/ml until you weigh it.
Size Price Unit price For 100 × 120 ml
100g ₹325.00 ₹3.25 the 100 g test batch that measures your blend
500 ML ₹1,099.00 ₹2.20 21 for the run at the worked densities
21 × 500 ML = ₹23,079.00 at the worked densities. Buy 500 ML — ₹1,099.00
2
base · floral, citrus, green and fruity positioning
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
Its page positions it for "floral, citrus, green, and fruity" families, which would include a bergamot-led oil: a hypothesis for your test, not a promise. Same price per ml as Pure Performance, so the bottle count, not the base, drives the bill. Limitation: 500 ml only; you cannot buy a small amount just to measure its density.
Size Price Per ml For 100 × 120 ml
500 ml ₹1,099.00 ₹2.20 same count: 21 bottles = ₹23,079.00
3
base · woody, amber and resinous positioning
Longevity Base – Professional Grade Reed & Car Diffuser Base (500 ml)
Its page positions it for "oriental, woody, resinous, and balsamic" families and "long-lasting cold scent diffusion". For an amber-heavy blend it is the obvious second arm. Argued against our own interest: at ₹1,296.00 it costs ₹197.00 more per bottle, ₹4,137.00 more over 21 bottles; buy it for the run only if it beats a ₹1,099.00 base in your own test.
Size Price Per ml For 100 × 120 ml
500 ml ₹1,296.00 ₹2.59 21 bottles = ₹27,216.00
4
oil · citrus amber · worked example for the run
Bergamot Amber Fragrance Oil
Page notes: "sparkling bergamot and citrus top notes, warm amber and soft floral heart, woody musk and smooth vanilla base"; usage "10-30% for reed diffusers", so 20% is inside the page's range. We use it to price the oil line; substitute your own. The page states no density, like every CSI oil page in our data. Pack quirk, stated plainly: five 500 gm cost ₹13,590.00 and two 1 kg plus one 500 gm cost ₹13,592.00, so the 1 kg route is ₹2.00 dearer for the same 2,500 g.
Size Price Per gram For 100 × 120 ml
15 gm ₹105.02 ₹7.00 too small for the run
50 gm ₹280.00 ₹5.60 too small for the run
100 gm ₹560.00 ₹5.60 the 100 g test batch needs 20 g
500 gm ₹2,718.00 ₹5.44 five = 2,500 g for the run (106 g spare)
1 kg ₹5,437.00 ₹5.44 two + one 500 gm costs ₹2.00 more than five 500 gm
Five 500 gm: ₹13,590.00. Buy 500 gm — ₹2,718.00
5
bottle and reeds · the run itself
Gold Reed Diffuser Bottle Pack of 10 + Fiber Diffuser Reeds (Black)
Ten 120 ML packs make your 100 bottles at ₹106.20 each. The page also says "Size: 50 and 100ml" and states no brim capacity or neck size, so confirm by weighing water before you promise 120 ml of liquid. Reeds are 20.3 cm fibre, not rattan; six per bottle is 600, bought as 500 + 100 (₹4,800.00). Limitation: reeds are flat at ₹8.00 from 50 up, so the 500-pack saves nothing per reed; it just saves you counting.
Pack Price Per unit For 100 × 120 ml
50 ML Pack of 10 ₹826.00 ₹82.60 not this run
120 ML Pack of 10 ₹1,062.00 ₹106.20 10 packs = 100 (₹10,620.00); 11 for spares (₹11,682.00)
Pack of 100 ₹800.00 ₹8.00 with the 500: 600 reeds
Pack of 500 ₹4,000.00 ₹8.00 same per reed as the 100
Bottles ₹10,620.00 + reeds ₹4,800.00. Buy 120 ML × 10 — ₹1,062.00

Not for this run: CSI HyperDiffusion Base (out of stock on 7 October 2026); Room & Linen Spray Base and Perfume Base, which are not reed bases; and Isopropyl Alcohol Spray, a cleaner that is never a diffuser ingredient. For buying the trial before the run, see the 20-sample, three-base purchase sheet or the first comparison buy.

The CSI principle
Sell in millilitres, formulate in grams, and convert with a density you weighed yourself, never one you assumed.
100 × 120 ml at 20%, worked densities: 11,970 g of blend, 2,394 g of oil, 9,576 g of base, 10,080 ml, 21 × 500 ml.
"A spreadsheet that says 500 ml is 500 g is a spreadsheet that runs out on bottle ninety-six."
— CandleMakingSuppliesIndia
Why trust this guide

CandleMakingSuppliesIndia sells the bases, oil, bottles and reeds named here. This page still tells you that none of our oil or base pages in the data we checked states a density, that we sell no DPG, DPM, IPM, Augeo-type solvent or perfumer's alcohol, that our base pages publish no composition or SDS in the text we captured, and that if your own carrier wins your test you should keep it.

Every price was checked on the live store on 7 October 2026, with stock checked per size: every item in the purchase sheet is in stock on that date, and CSI HyperDiffusion Base is out of stock and not offered. Page wording is quoted as the page's description.

All densities, the blend-density estimate, the 3% allowance, the target window and the pass rule are labelled worked examples or in-house choices; the diagram is illustrative. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.

Frequently asked questions

How do I convert ml to grams for a reed diffuser formula?
Multiply the millilitres by the density of that liquid in g/ml. For a filled bottle, use the density of the finished blend, measured by weighing 50 ml of a real test batch.
How much base do I need for 100 reed diffusers of 120 ml?
At worked densities of 1.05 (oil) and 0.95 (base) and 20% oil: 9,576 g of base with a 3% allowance, which is 10,080 ml, 21 bottles of 500 ml. Recalculate with your measured densities.
Is 20% fragrance in a reed diffuser by weight or by volume?
Formulate by weight. With an oil denser than the base, 20% by volume becomes about 21.6% by weight; with a lighter oil it drops below 20%.
What is the density of reed diffuser base?
It depends on the base, and none of CSI's base pages states one. Weigh 100 ml in a tared beaker at room temperature and divide the grams by 100.
How much should I fill a 120 ml reed diffuser bottle?
Check the bottle's capacity with water to the shoulder, insert your reeds, and set the fill in grams from that test. A bottle sold as 120 ml may not take 120 ml of liquid plus reeds.
How much extra reed diffuser base should I buy for filling losses?
Measure your own losses on the first run. As a worked example, 3% turns 20 bottles of 500 ml into 21 for a 100-bottle run.
100 × 120 ml · two densities
Weigh 100 ml of base and 50 ml of blend, then buy 21 bottles of 500 ml, not a guess.
At the worked densities the run needs 2,394 g of oil and 10,080 ml of base. Materials at CSI come to ₹52,089.00, ₹520.89 a diffuser, excluding labour, freight and GST. Send us your measured densities and counts and we'll confirm stock and lot before you pay.
Shop reed diffuser bases Confirm the run on WhatsApp
Editorial standards & sources
About this guide: part of CSI's series on reed diffuser formulation with DPG, DPM, IPM and Augeo-type carriers, cluster "Buying the Right Materials and Scaling" (8381–8400). It owns the base calculation for a fixed run of 100 × 120 ml when the oil and base densities differ: blend density, grams per bottle, oil and base by weight, base in millilitres, filling losses, CSI packs and rupees. Augeo is a trademark of another company (Solvay); CSI does not sell Augeo-type solvents.

Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Blue Ocean Fragrance Oil, Citrus Lemon Fragrance Oil, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Sacred Sandal Ember Fragrance Oil, Woody Oud Fragrance Oil. They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — snehal Chaudhary, Sooraj R, Avanthi Cheeli, Yashvi Shah, Renam Dhoundiyal, Urvashi Patel. Reviews below five stars are included as published, not filtered out.

Figures verified 7 October 2026, CSI live pricing: Pure Performance Reed Base Oil 100g ₹325.00, 500 ML ₹1,099.00; Lift Base 500 ml ₹1,099.00 (₹2.20 a ml); Longevity Base 500 ml ₹1,296.00 (₹2.59 a ml); CSI HyperDiffusion Base ₹1,499.00 (out of stock); Bergamot Amber Fragrance Oil 15 gm ₹105.02, 50 gm ₹280.00, 100 gm ₹560.00, 500 gm ₹2,718.00, 1 kg ₹5,437.00; Gold Reed Diffuser Bottle Pack of 10, 50 ML ₹826.00, 120 ML ₹1,062.00 (₹106.20 each); Fiber Diffuser Reeds (Black) 100 ₹800.00, 500 ₹4,000.00 (₹8.00 each); (White) 100 ₹900.00, 500 ₹4,500.00; Silicon Measuring Beaker 100 ML ₹300.00, 250 ML ₹600.00; Candle Making Weighing Scale ₹354.00. Per unit = price ÷ quantity, two decimals.

Non-price figures: "100 diffusers" and "120 ml each" are the reader's figures (title); 20% by weight is this series' default. Oil 1.05 g/ml and base 0.95 g/ml (and 0.90–1.05 in the sensitivity table) are worked densities, not CSI data; no CSI page in our data states a density. The blend density formula assumes volumes add. The 3% allowance, six reeds per bottle, 60–75 day target window, 2 m sniff distance and 1–5 score are worked examples or in-house choices. Bergamot Amber prices the oil line as a worked example. No performance figure on this page is CSI test data. Costs are materials only and exclude labour, freight, packaging and GST. Festival dates are calendar facts.
ब्लॉग पर वापस जाएं