I Am Making Luxury Car Perfume Sprays and Hanging Fresheners — Can I Use the Same Designer-Inspired Fragrance Oil in Both After Separate Testing?
शेयर करना
I Am Making Luxury Car Perfume Sprays and Hanging Fresheners — Can I Use the Same Designer-Inspired Fragrance Oil in Both After Separate Testing?
8 ml sprayer ₹120 per 5 · ₹24.00 each, pump included12 ml hanging bottle ₹600 per 12 · ₹50.00 eachStocked in India · ships nationwide
CSI formulation guides · two formats, one oil
One oil, two formats, two published load windows. The spray base stops at 15% and the car base works at 25% — so the same oil means two formulas, not one recipe in two containers.
★★★★★
"I just tried it out , it's absolutely stunning. Super easy to use and such a life saver."
ThenirvaofficialVerified buyer · Mar 2026
Room & Linen Spray Base
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base for Reed & Candle
★★★★★
"Nice product"
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle
★★★★★
"Good quality wood fragrance oil with a warm, long-lasting scent and strong performance in candles."
Payal PatelVerified buyer · Mar 2026
Woody Oud Fragrance Oil
★★★★★
"…M obsessed with the vanilla fragrance💕 I ll definitely shop again☺️"
SUMAN BISHTJul 2025
Dark Vanilla Oud
★★★★★
"Good fragrance…"
Sooraj RVerified buyer · Aug 2026
Blue Ocean Fragrance Oil
★★★★★
"A very calming fragrance"
AnonymousVerified buyer · Jul 2025
Lavender Fragrance Oil
★★★★★
"…Gilli Mitti and Pumpkin Spice scents are amazing and authentic.…"
RenuVerified buyer · Jul 2026
Gilli Mitti (Patchouli)
★★★★★
"This needle is very helpful as it doesn’t damage the mould and there is no leakage of wax while pouring.. I would definitely recommend this .."
LJAug 2024
Premium Candle Wicking Needle
★★★★★
"…Good vibrant colours in both luxury soy wax and coconut soy wax.…"
Antara Srinivas IyerVerified buyer · Jun 2025
Candle Dye Liquid
★★★★★
"I just tried it out , it's absolutely stunning. Super easy to use and such a life saver."
ThenirvaofficialVerified buyer · Mar 2026
Room & Linen Spray Base
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base for Reed & Candle
★★★★★
"Nice product"
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle
★★★★★
"Good quality wood fragrance oil with a warm, long-lasting scent and strong performance in candles."
Payal PatelVerified buyer · Mar 2026
Woody Oud Fragrance Oil
★★★★★
"…M obsessed with the vanilla fragrance💕 I ll definitely shop again☺️"
SUMAN BISHTJul 2025
Dark Vanilla Oud
★★★★★
"Good fragrance…"
Sooraj RVerified buyer · Aug 2026
Blue Ocean Fragrance Oil
★★★★★
"A very calming fragrance"
AnonymousVerified buyer · Jul 2025
Lavender Fragrance Oil
★★★★★
"…Gilli Mitti and Pumpkin Spice scents are amazing and authentic.…"
RenuVerified buyer · Jul 2026
Gilli Mitti (Patchouli)
★★★★★
"This needle is very helpful as it doesn’t damage the mould and there is no leakage of wax while pouring.. I would definitely recommend this .."
LJAug 2024
Premium Candle Wicking Needle
★★★★★
"…Good vibrant colours in both luxury soy wax and coconut soy wax.…"
Antara Srinivas IyerVerified buyer · Jun 2025
Candle Dye Liquid
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. Wording is unedited.
✓ Each base's own published load window, never interchanged✓ Page conflicts named, not resolved✓ Bulk pricing & GST invoicing on WhatsApp
Luxury Car Perfume Guides · Spray and Hanging
I Am Making Luxury Car Perfume Sprays and Hanging Fresheners — Can I Use the Same Designer-Inspired Fragrance Oil in Both After Separate Testing?
Yes — and the phrase "after separate testing" is the entire answer, because the two formats do not share a load, a rest time, a delivery mechanism or a failure mode. CSI's spray base publishes 8–15% with 10% recommended and a 12–24 hour rest. The reed and car base publishes 10–30% with a 25–30% working ratio and a 24–48 hour rest. Carry the 25% habit into a spray and you are ten points above a stated maximum. The unit that makes the difference visible is one press of a pump.
0.012 ml
Fragrance oil delivered by one actuation at the spray base's recommended 10% and the 8 ml bottle's published 0.12 ml upper output — against 3.0 g sitting permanently in a 12 ml hanging bottle · CSI live pricing, October 2026
Quick answers — read this first
Can the same oil go in both? Yes. Nothing published anywhere says a fragrance oil belongs to one format. What changes is everything around it.
What load for each? The Room & Linen Spray Base page publishes 8–15% fragrance, 10% recommended, 15% maximum, 12–24 hour rest. The reed and car bases publish 10–30%, a 25–30% working ratio, 24–48 hour rest. Use each page's own figures and never the other's.
How much oil does one spray actually deliver? The 8 ml bottle publishes 0.1–0.12 ml per actuation and 65–80 sprays per fill. At 10% that is 0.010 to 0.012 ml of fragrance oil per press. A 12 ml hanging bottle holds 3.0 g and releases it without anyone pressing anything.
Which format uses less oil? The spray, by a long way. One 8 ml fill at 10% is 0.8 g; one 12 ml hanging bottle at 25% is 3.0 g. So 100 g of oil makes 33 hanging bottles or 125 spray fills.
Is there a contradiction to know about? Yes, and it is not resolved here. The spray base page recommends a sprayer delivering 0.3–0.5 ml per spray, while CSI's own 8 ml bottle delivers 0.1–0.12 ml — between 2.5 and 5 times less. Both figures are published. Pick your own and write down which.
The short answer
One oil, two formulas: the oil is the only shared component. Base, load, rest time, container, closure, release mechanism and failure mode all differ, so a pass in one format is not evidence about the other.
Never import the 25% working ratio into a spray: 25% is ten points above the spray base's published 15% maximum, and that page's own clouding remedy is "reduce percentage and retest" — so an over-loaded spray is the failure it tells you to expect.
Measure the formats on their own units: the spray's unit is the actuation (0.010–0.012 ml of oil at 10%), the hanging bottle's is grams lost per day. Comparing them directly is a category error.
Every figure in both boxes is published on a CSI page — the spray base's 8–15% window, 10% recommendation, 15% maximum and 12–24 hour rest; the 8 ml bottle's 0.1–0.12 ml actuation and 65–80 sprays; the reed and car bases' 10–30% load, 25–30% working ratio and 24–48 hour rest; the wooden lid's absorb-and-release wording. Nothing is carried across the middle except the oil itself. The 0.010–0.012 ml figure is arithmetic on two published numbers, not a measurement of any product.
Can I use the same designer-inspired fragrance oil in a car perfume spray and a hanging freshener?
Yes, and you should — one oil across two formats halves your sampling, your lot tracking and your retained references, and it gives a customer a coherent scent across two price points. What you must not do is treat it as one formula. The two bases publish different numbers and those numbers are not interchangeable. The Room & Linen Spray Base publishes 8–15% fragrance with 10% recommended, 15% as a maximum, and a 12–24 hour rest.The reed and car diffuser bases publish 10–30% with a 25–30% working ratio and a 24–48 hour rest. Twenty-five per cent in a spray is ten points above a stated maximum, and the spray base's own published remedy for a cloudy batch is to reduce percentage and retest — so an over-loaded spray is precisely the failure that page warns you about. Convert both to their natural units and the formats stop looking comparable at all. A 12 ml hanging bottle at 25% holds 3.0 g of oil and releases it continuously through a wooden cap with no action from the user. An 8 ml spray at 10% holds 0.8 g, and the bottle page publishes 0.1–0.12 ml per actuation and 65–80 sprays per fill, so one press delivers 0.010 to 0.012 ml of fragrance oil and the user decides when. That is a different product doing a different job with the same ingredient. So: two formulas, two rest times, two test programmes, two sets of notes — and one oil, one invoice and one retained reference bottle. And one contradiction to carry rather than resolve: the spray base recommends a sprayer at 0.3–0.5 ml per spray while CSI's own 8 ml bottle delivers 0.1–0.12 ml. Both numbers are published, they disagree by 2.5 to 5 times, and your batch sheet should record which one you built to.
One line: same oil, yes — but 10% and a 12–24 hour rest in the spray, 25% and a 24–48 hour rest in the hanging bottle, and never the other way round.
The two-format trial in one cart: 8 ml sprayers ₹120 for five, Room & Linen Spray Base 500 g ₹999, 12 ml wooden-cap bottles ₹600 for twelve and Delina inspired 100 g ₹1,195. Around ₹2,914 builds five sprays and twelve hanging bottles from one oil.
The 25% habit is the most expensive thing a reed maker carries into a spray bottle.
Almost everyone building both formats learns the car base first, because hanging bottles are the easier product. Twenty-five per cent becomes muscle memory, the spray bottle arrives, and the same ratio goes in. Then the batch clouds, and the maker starts looking for a solubiliser, a different oil or a filter — when the answer was printed on the base's own page before the batch was mixed.
Here is every published figure for both, from the two pages themselves. Nothing in this table is inferred, and nothing from one column has been allowed to leak into the other.
Published figures only · the spray base page and the reed-car base pages
Where the two formats agree, where they differ, and by how much
Published figure
Room & Linen Spray Base
Reed & Car Diffuser Base
Difference, and why it matters
Fragrance load window
8–15%
10–30%
The windows overlap only between 10 and 15%
Recommended load
10%
25–30% working ratio
15 to 20 points apart on the same bottle of oil
Stated maximum
15%
30%
A 25% spray is 10 points over a stated maximum
Rest before bottling or use
12–24 hours
24–48 hours
Two different production schedules in one workshop
Named failure and remedy
Clouding — "reduce percentage and retest", never add water, filter through fine mesh if particulate shows
No clouding remedy published
The spray page is the most method-rich in the range
Worked example on the page
90 g base + 10 g fragrance
Ratio only, no worked grams
The spray page hands you a mass build directly
Surface cautions
Avoid screens, polished wood, unfinished leather
Published on the car kit page: avoid polished, plastic or leather surfaces
Both go on your own care card, verbatim
Stated car application
"Car Interiors" is listed among its applications
The format is the car bottle itself
The best published justification for a car spray on this base
Read directly off the pages above: the overlap between 8–15% and 10–30% is the band from 10% to 15%, so if you genuinely want one number for both formats, it has to be 10–15% — and then your hanging bottle is running below its own published working ratio, which is a trade-off to make deliberately rather than by accident. The spray base's 90 g + 10 g worked example is a 10% mass build; scaled to an 8 g fill that is 7.2 g of base and 0.8 g of oil. No density is published for either base or for any oil, so a build quoted in millilitres and grams together is a hybrid and is labelled as such throughout this page.
The mistake: diagnosing a cloudy spray as an oil problem. A spray clouds, the maker concludes the oil is "not soluble", and switches to a different oil — which clouds too, because the load never changed. The spray base page gives the diagnostic sequence in its own words: reduce the percentage and retest, do not add water, and filter through a fine mesh if particulate is showing. Work down from 15% in two-point steps, rest each one the published 12–24 hours before judging it, and record where it goes clear. That number is your maximum for that oil in that base, and it may be below the page's own 15%. Only after you have found it is "the oil" a defensible explanation. The same oil at 25% in a car base can be perfectly clear, which is exactly why the two formats need separate testing.
Write the convention on the batch sheet, every time
The spray base is sold by weight — 500 g at ₹999 = ₹1.998 a gram — which makes a mass build natural: 7.2 g + 0.8 g for an 8 g fill. The reed and car bases are sold by volume at 500 ml, which makes 9 ml + 3.0 g natural and mixes units. No density is published for any base or oil in the range, so these two conventions cannot be reconciled arithmetically. Pick one per product, write it at the top of the sheet, and never compare a mass-built batch with a volume-built one.
The actuation: what one spray actually delivers
The spray's natural unit is not the bottle, it is the press. That is the only point in the product where fragrance reaches the air, and CSI's 8 ml bottle is the one piece of hardware in the range that publishes enough to compute it: approximately 0.1–0.12 ml per spray and approximately 65–80 sprays per fill. Those two figures are arithmetically consistent with each other — 8 ÷ 0.12 = 67 and 8 ÷ 0.1 = 80 — which is a good sign that somebody measured rather than guessed.
Multiply the actuation volume by the load and you get the only per-use fragrance figure available anywhere in this catalogue. The table runs it across the spray base's whole published window.
Per actuation · the 8 ml bottle's published output across the spray base's published window
What one press delivers at each load, and what a fill costs in oil
Load
Oil in one 8 ml fill
Oil per actuation at 0.1 ml
Oil per actuation at 0.12 ml
Oil cost per press
8% — published minimum
0.64 g
0.0080 ml
0.0096 ml
₹0.10 to ₹0.11
10% — published recommendation
0.80 g
0.0100 ml
0.0120 ml
₹0.12 to ₹0.14
12%
0.96 g
0.0120 ml
0.0144 ml
₹0.14 to ₹0.17
15% — published maximum
1.20 g
0.0150 ml
0.0180 ml
₹0.18 to ₹0.22
25% — the car base's ratio
2.00 g
0.0250 ml
0.0300 ml
Above the stated maximum. Do not.
Sprays per fill, published
65 to 80, at any load
80 at 0.1 ml
67 at 0.12 ml
Load does not change the count
Worked out above: oil per fill = 8 g × load, on the mass convention the spray base's own 90 g + 10 g example uses. Oil per actuation = actuation volume × load, using the bottle page's published 0.1 ml and 0.12 ml. Cost per press = oil per actuation × the oil's gram price, shown at Parfums De Marly Delina inspired's cheapest gram of ₹11.95, treating 1 ml as 1 g because no density is published — a hybrid, flagged. Cross-check: 0.80 g ÷ 80 sprays = 0.010 and 0.80 ÷ 67 = 0.012, which matches the per-actuation column. The 25% row is shown to make the gap visible and is ten points above the page's stated maximum.
Two things fall out of that table that change how you price and describe a spray. First, the oil cost per press is between twelve and fourteen paise at the recommended load on a premium inspired oil — the fragrance is nearly free per use, and the bottle and base are the cost. Second, the published 65–80 sprays is a figure about the pump, not about the formula, so it does not move when you change the load. A customer who gets "about 70 sprays" gets about 70 sprays at 8% and at 15%; what changes is how much fragrance each one carries.
The sprayer contradiction, named and not resolved
There is a genuine disagreement between two CSI pages, and you should know about it before you build a spray range rather than after. The spray base page recommends a sprayer that delivers 0.3–0.5 ml per spray. CSI's own 8 ml glass bottle publishes 0.1–0.12 ml per actuation. Those are not close: the base page's recommendation is between 2.5 and 5 times the output of the bottle the same shop sells.
This page does not resolve it, because resolving it would mean asserting which figure is right, and neither page gives grounds for that. What it does instead is show you what each assumption implies, so that whichever you build to, you know what you have built.
The same 8 ml fill, under two published sprayer outputs
What each assumption does to sprays per fill and oil per press
Sprayer output
Where it is published
Sprays from an 8 ml fill
Oil per press at 10%
What it implies for your product
0.10 ml
8 ml bottle page, lower figure
80
0.0100 ml
Matches the page's own 65–80 claim
0.12 ml
8 ml bottle page, upper figure
67
0.0120 ml
Also matches the 65–80 claim
0.30 ml
Spray base page, lower recommendation
27
0.0300 ml
A fill lasts a quarter as long; 2.5× the oil per press
0.50 ml
Spray base page, upper recommendation
16
0.0500 ml
A fill lasts a fifth as long; 5× the oil per press
The ₹42.00 50 ml bottle
Publishes no spray volume at all
Unknown
Unknown
The two pages cannot confirm each other through it
What you should do
Measure your own
Count presses to empty, twice
Divide the fill by the count
Your measured number beats both published ones
Worked out above: sprays per fill = 8 ml ÷ output; oil per press = output × 10% load. The ₹42.00 50 ml room spray bottle publishes no spray volume, so it cannot adjudicate between the two figures either. The measurement that settles it for your product takes one bottle and an afternoon: fill 8 g, count presses until it stops atomising, and divide. Do it twice on two bottles from the same pack, because a pump is a mechanical part and two samples tell you whether the count is stable.
Why this matters commercially rather than pedantically: the number of sprays per bottle is the single most quoted figure in car and personal spray marketing, and it is the one your customer will test without meaning to. If your label says 70 sprays and the pump gives 20, that is a refund conversation. Count your own presses before you print anything. And note that the bottle page also carries a usage duration — "2–3 weeks of daily use at 3–4 sprays" — which is consistent with its own 65–80 figure but is still a claim about somebody's habits rather than a specification. Do not reprint it as one.
Oil consumption and cost, per format
Here is where running both formats from one oil earns its keep. The spray uses roughly a quarter of the oil per unit, which means the same pack of oil stretches nearly four times as far — and the spray's finished material cost is less than half the hanging bottle's. That makes the pair a natural good-better ladder rather than two competing products.
Per finished unit · one oil, two formats, at each base's own published load
Where the money goes, and how far one 100 g pack of oil stretches
Line
8 ml spray at 10%
12 ml hanging at 25%
Ratio
Container
₹24.00 (₹120 per pack of 5, pump included)
₹50.00 (₹600 per pack of 12)
2.08×
Base in one unit
7.2 g at ₹1.998 = ₹14.39
9 ml at ₹2.198 = ₹19.78
1.37×
Oil in one unit
0.8 g = ₹9.56
3.0 g = ₹35.85
3.75×
Material cost per unit
₹47.95
₹105.63
2.20×
Units from one 100 g pack of oil
125 fills
33 bottles
3.79×
Oil as a share of the unit
19.9%
33.9%
—
1,000 units of materials
₹48,545
₹107,131(1,008 units)
2.21×
Worked out above, with Parfums De Marly Delina inspired at its cheapest gram of ₹11.95 (100 g rung). Spray: 8 g fill at 10% = 7.2 g base + 0.8 g oil; base 7.2 × 1.998 = ₹14.39; oil 0.8 × 11.95 = ₹9.56; bottle ₹120 ÷ 5 = ₹24.00; total ₹47.95. Hanging: 9 ml base × ₹2.198 = ₹19.78; oil 3.0 × 11.95 = ₹35.85; bottle ₹600 ÷ 12 = ₹50.00; total ₹105.63. At 1,000 units: sprays need 200 packs of five (₹24,000), 7,200 g of base = 15 packs of 500 g (₹14,985) and 800 g of oil (₹9,560) = ₹48,545; hanging needs 84 packs of twelve for 1,008 bottles (₹50,400), 9,072 ml of base = 19 packs (₹20,881) and 3,024 g of oil (₹36,137) = ₹107,418, shown as ₹107,131 at exactly 3,000 g. Base conventions differ by page and no density is published for either.
The strategic reading: the spray is the cheap entry product and the hanging bottle is the one that carries the scent experience without the customer doing anything. Price them accordingly, and note that your oil order is dominated by the hanging line — a thousand of each needs 3,024 g for the bottles and 800 g for the sprays, so the hanging format is 79% of your oil purchase and nearly all of your stock risk.
1
The only sprayer in the range with a published spec table
8ml Glass Bottle with Spray and Cap (Pack of 5)
₹120 for five = ₹24.00 a bottle with the pump included, 1,000 packs in stock. It is the most thoroughly documented container in the catalogue and the reason this page can compute anything per press: it publishes 0.1–0.12 ml per actuation, 65–80 sprays per fill, a fine-mist atomiser pump, a friction-fit cap stated leakproof when fitted, refillability by removing the pump collar, and an isopropyl alcohol flush as its named cleaning method between fragrances. It also states that glass is chemically inert while PET and HDPE absorb fragrance compounds and leach plasticisers, and notes that thin dilutions at 5–15% fragrance spray cleanly. Two cautions: that 5–15% note is written about jojoba and fractionated-coconut dilutions rather than about CSI's own spray base, and the page's own order button links to a different domain and a handle that does not resolve — use the product page itself.
Size
Price
Per bottle
Published output
Pack of 5
₹120.00
₹24.00
0.1–0.12 ml per spray, 65–80 per fill
₹24.00 a unit, pump included · the cheapest finished format in the rangeBuy 8 ml spray bottles
2
Its own load window · and the most method-rich page in the range
Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g)
₹999 for 500 g = ₹1.998 a gram, 74 packs in stock — and because it is sold by weight, a mass-based costing works cleanly, which the volume-priced reed bases do not allow. Its page publishes more usable method than anything else in the catalogue: the 8–15% window with 10% recommended and 15% maximum, a 12–24 hour rest, a 90 g + 10 g worked example, the order of addition, the clouding remedy in its own words, surface cautions against screens, polished wood and unfinished leather, and "Car Interiors" among its listed applications — which is the best published justification in the range for building a car spray on it. One caution for the owner rather than the maker: its description field carries raw structured data and a stylesheet dumped into the body copy, which makes the page hard to read even though the figures in it are the most useful you will find.
One oil, both formats · cheapest gram sits at the 100 g rung
Parfums De Marly Delina inspired fragrance oil
₹598 / 50 g, ₹1,195 / 100 g, ₹11,952 / 1 kg, with 1,199 units on the listing. Its cheapest gram is the 100 g rung at ₹11.95 — fractionally under the 50 g's ₹11.96 — and its kilo is ₹2 dearer than ten 100 g packs, so the big pack earns nothing but a bigger container. Like every listing on the brand-referencing shelf there is no 500 g rung, which makes the 100 g pack the natural unit for a two-format trial: 100 g is 33 hanging bottles or 125 spray fills, or any mix. Buy it by its exact listed title and sell your product under your own name — a supplier's catalogue line is not a retail product name. What it smells like in your base is for your panel; no CSI page publishes a scent description for any oil.
The passive format · and the one published MOQ in the range
Glass Car Hanging Freshener with Wooden Cap (12 ml) Pack of 12
₹600 per pack of twelve = ₹50.00 a bottle, 4,960 packs in stock, and it carries the only MOQ published anywhere in the CSI range: "Minimum Order: 12 pcs". Its mechanism is published and it is not a reed product — the page describes a wooden lid that absorbs oil and gently releases scent over time, with a braided hanging cord. No reed is supplied or needed, so treat it as a load-and-cap question rather than a reed question. One page conflict to name and not resolve: the title says 12 ml while both the handle and the body copy say 20 ml — two of the three say 20 — which changes your fill arithmetic materially, so confirm the fill volume on WhatsApp before you scale. A second, zero-stock duplicate listing of the same bottle also exists at ₹728 and should never be ordered from.
Priced above: 8 ml glass spray bottle ₹120 per pack of 5 = ₹24.00 each; Room & Linen Spray Base 500 g ₹999 = ₹1.998/g; Parfums De Marly Delina inspired 50 g ₹598, 100 g ₹1,195 (₹11.95/g, its cheapest), 1 kg ₹11,952, no 500 g rung; 12 ml wooden-cap bottle ₹600 per pack of 12 = ₹50.00 each. Yields: 100 g of oil = 125 spray fills at 0.8 g or 33 hanging bottles at 3.0 g; one 500 g base pack = 69 spray fills at 7.2 g. CSI live pricing and per-variant availability, 26 October 2026.
Two test programmes, run in one round
"Separate testing" does not mean testing twice as long. It means one round of work with two different checklists, because the things that can go wrong are different. The spray can cloud, clog, leak at the cap or mark a surface. The hanging bottle can seep at the cap, release too slowly, or empty in a fortnight. Neither test tells you anything about the other.
1
Build the spray arm at 10%, by weight, in the published order of additionWeigh 7.2 g of spray base and 0.8 g of oil for an 8 g fill — the mass-scaled version of the page's own 90 g + 10 g example — and follow the order of addition that page states rather than tipping both into the bottle together. Make three. Cap them, label them, and note the time. The spray base is weight-priced at ₹1.998 a gram, so a mass build is also the only way to cost it exactly.
2
Build the hanging arm at 25%, in the bottle you will sell3.0 g of oil in 9.0 g of base in the 12 ml wooden-cap bottle, which is the published working ratio for that base. Make three of these as well — six bottles in total is half a pack of twelve, the published minimum order. Because the bottle page's own stated fill volume is in conflict with its handle and body copy, weigh what actually goes in rather than trusting 12 ml, and write that weight down as your real fill.
3
Rest each arm for its own published period — 12 to 24 hours, and 24 to 48This is the step that makes the round efficient rather than slow: start both on the same evening and the spray arm is ready a day before the hanging arm. Judge nothing early. At the end of the spray's rest, hold each bottle to a light and look for haze, particulate or a separated film — the spray base names clouding as its failure mode and gives the remedy, so this is the moment that check belongs in.
4
Spray arm: count presses to empty, twice, and measure the patternFill one bottle, press until it stops atomising, and count. Divide 8 g by your count and you have your own actuation figure to put beside the published 0.1–0.12 ml — and beside the spray base page's 0.3–0.5 ml recommendation, which disagrees with it. Do it on a second bottle from the same pack to see whether the count is stable. Then spray onto a sheet of dark paper at arm's length and look at the pattern: a fine even mist against spitting or streaking tells you whether the viscosity suits the pump.
5
Spray arm: run the surface test the page tells you to respectThe spray base page names screens, polished wood and unfinished leather as surfaces to avoid, and the car kit page names polished, plastic and leather surfaces. So test on the actual materials, not on an assumption: a hidden patch of the trim, a scrap of the same plastic, one spray, wiped after a stated interval, checked at 24 hours and a week. CSI publishes no compatibility data for car interiors and neither does this page — the honest answer is a soak or spot test on your own components plus the vehicle manufacturer's own guidance, and never an assurance about dashboards, paint or upholstery.
6
Hanging arm: weigh on fixed dates and watch the cap and cordWeigh each capped bottle after its rest and then on days 3, 7, 14, 21 and 30, logging grams lost and the weather. Keep one bottle indoors as the paired control. At every weighing, look at the cord and the shoulder of the bottle for seepage — the wooden cap is designed to absorb and release, which means the join is the place a leak shows up first, and a leak in a customer's car is the complaint that ends a stockist relationship. No throw or longevity figure is published for anything, so this log is your only diffusion data.
7
Panel both arms blind, but never against each otherCode the sprays and panel them as sprays; code the hanging bottles and panel them as hanging bottles. Asking someone to compare a 10% spray with a 25% diffusion bottle produces an answer about concentration and format, not about your oil. What you want from each panel is three accord words and an intensity score within its own format, at two checkpoints. If the same oil reads balanced in one format and thin in the other, that is a real and useful finding — and it is an argument for two different oils rather than for changing the load past a published maximum.
Do not clean a pump between fragrances with water, and do not skip cleaning it at all. The 8 ml bottle page names its own method: add a little isopropyl alcohol, pump several times to flush the mechanism, and air dry fully before refilling. Isopropyl Alcohol Spray is listed at ₹383 for 150 ML and ₹520 for 1 Litre, which is ₹2.553 against ₹0.520 a millilitre — a 4.91× drop that makes the litre the obvious buy if you are running a spray line at all. Skipping the flush is how your third fragrance tastes of your first, and water in an oil-bearing pump is how it clogs. The spray base page is explicit on the related point: do not add water to the formula either.
Running both at 1,000 units each? Sprays need 200 packs of 8 ml bottles (₹24,000) and fifteen 500 g base packs (₹14,985) — but that base listing holds 74 packs, so confirm before you plan a second scent. Hanging needs 84 bottle packs (₹50,400) and nineteen 500 ml base packs (₹20,881).
Pulling it into a cart. The point of one oil across two formats is that the expensive part of product development — finding an oil your panel approves — happens once. Everything else is two short checklists and two base packs.
The two-format trial, and then the two-format run
What to order at each stage, and what it yields in each format
Stage
What you buy
Cost
Yields
What it settles
Oil screen
50 g of two or three candidate oils
₹1,196 to ₹1,794
125–187 spray fills or 33–49 bottles
Which oil both formats will share
Two-format trial
One 8 ml pack, one spray base, one bottle pack, 100 g of oil
₹2,914
5 sprays + 12 hanging bottles
Clouding, press count, cap seep, 30-day log
Spray clouding ladder
Nothing extra — four fills from the same stock
₹0
4 test bottles at 8, 10, 12, 15%
Your own maximum for that oil in that base
Spray run, 1,000 units
200 bottle packs, 15 base packs, 800 g oil
₹48,545
1,000 finished sprays
₹48.55 a unit of materials
Hanging run, 1,000 units
84 bottle packs, 19 base packs, 3,024 g oil
₹107,418
1,008 finished bottles
₹106.57 a unit of materials
Worked out above, at Delina inspired's ₹11.95 a gram: the trial is ₹120 + ₹999 + ₹600 + ₹1,195 = ₹2,914, which covers five 8 g sprays (4 g of oil) and twelve 12 ml bottles (36 g of oil) with 60 g of oil to spare. The clouding ladder costs nothing because four more 8 g fills use 3.4 g of oil from stock you already have. Spray run: 1,000 ÷ 5 = 200 packs ₹24,000; 7,200 g of base = 15 packs ₹14,985; 800 g of oil ₹9,560. Hanging run: 84 packs ₹50,400; 9,072 ml = 19 packs ₹20,881; 3,024 g ₹36,137. Both use each base's own published load.
One stock note before you plan the spray line at volume: the spray base listing holds 74 packs and a thousand sprays needs fifteen of them, so a single scent is comfortable and four scents at that scale is most of the shelf. The hanging base is far deeper. Check the per-variant count and send one message rather than discovering it at the cart, and for the broader version of that habit, the samples-and-wholesale post works through reading rungs rather than product totals.
The CSI principle
The same oil, yes. The same formula, never. Each base's own published numbers, and a separate checklist for each format's own failure.
A spray base that publishes 8–15% with a 15% maximum and a 12–24 hour rest is telling you something different from a car base that publishes a 25–30% working ratio and a 24–48 hour rest. Those pages are not approximations of each other. Build to the page in front of you, write the convention on the batch sheet, and when two CSI pages disagree — as the 0.3–0.5 ml sprayer recommendation and the 0.1–0.12 ml bottle output do — record which one you built to rather than averaging them.
One oil is a sourcing decision. One formula is a mistake with two product lines attached to it.
— CandleMakingSuppliesIndia
Why trust this guide
CANDLEMAKINGSUPPLIESINDIA supplies raw materials, not finished car perfumes. Every load, rest time, actuation volume and spray count on this page is quoted from the specific CSI page that publishes it, and figures from one base are never applied to another. No oil here is described by how it smells beyond its own listed title and page wording, no two oils are ranked, and nobody at CSI has smelled your blend. Where a brand name appears it names a CSI listing by its exact published title — never an affiliation, an endorsement, a licence, a match or a replacement — and your own finished product should carry your own scent name rather than anyone else's.
Every price and per-variant availability flag was read from live CSI data on 26 October 2026. Stated specifications as published: spray base 8–15% load, 10% recommended, 15% maximum, 12–24 hour rest, a 90 g + 10 g worked example, the clouding remedy, the order of addition, surface cautions against screens, polished wood and unfinished leather, "Car Interiors" among its applications, and a recommended sprayer of 0.3–0.5 ml per spray; the 8 ml bottle 0.1–0.12 ml per actuation, 65–80 sprays per fill, fine-mist atomiser, leakproof when capped, refillable, an isopropyl-alcohol flush, glass inert against PET and HDPE, and a note that 5–15% dilutions spray cleanly; the reed and car bases 10–30% load, 25–30% working ratio, 24–48 hour rest; the 12 ml bottle "Minimum Order: 12 pcs" and its wooden-lid absorb-and-release wording.
Three page conflicts are named here and deliberately not resolved: the spray base's 0.3–0.5 ml sprayer recommendation against the 8 ml bottle's 0.1–0.12 ml output; the 12 ml bottle's title against its handle and body copy, which both say 20 ml; and the 8 ml page's order button, which points to a different domain and a handle that does not resolve. The ₹42.00 50 ml spray bottle publishes no spray volume at all, so it cannot confirm either figure. No throw, longevity, evaporation, heat-stability or density figure is published for any CSI oil or base, so no duration is stated here for either format and every volume-plus-mass figure is labelled a hybrid convention. Plastic and interior-surface compatibility is a test you run, never a claim: CSI publishes no compatibility data and neither does this page. For bulk pricing, GST invoicing or documentation, message us on WhatsApp at +91 7397976926; safety, labelling and transport decisions belong with a qualified adviser.
Frequently asked questions
What fragrance percentage should I use in a car perfume spray?
Use the spray base's own published figures, not the reed base's. The Room & Linen Spray Base page publishes 8–15% fragrance, with 10% recommended and 15% stated as the maximum, plus a 12–24 hour rest and a worked 90 g + 10 g example. The reed and car diffuser bases publish 10–30% and a 25–30% working ratio, which is a different product — 25% in a spray is ten points above a stated maximum and is very likely the cause when a batch clouds. Start at 10%, and if you want more, work up in two-point steps, resting each one before you judge it.
How many sprays does an 8 ml car perfume bottle give?
The 8 ml bottle page publishes approximately 65–80 sprays per fill at 0.1–0.12 ml per actuation, and those two figures are arithmetically consistent. But the spray base page recommends a sprayer delivering 0.3–0.5 ml, which would give only 16 to 27 sprays from the same 8 ml — a published disagreement of 2.5 to 5 times that neither page resolves. So measure your own: fill one bottle, press until it stops atomising, count, and repeat on a second bottle. Print your measured number, never a borrowed one, because a customer tests this figure without meaning to.
Why did my car perfume spray turn cloudy?
Most often because the load is too high, and the base page tells you so in its own words: the published remedy is to reduce the percentage and retest, to not add water, and to filter through a fine mesh if particulate is showing. Check your number against the page's 15% maximum first — a reed-base habit of 25% is the usual culprit. Then work down from 15% in two-point steps, resting each batch the published 12–24 hours before judging, and record where it goes clear. That is your maximum for that oil in that base, and it may sit below 15%. Only then is "the oil" a defensible explanation.
Does a spray use less fragrance oil than a hanging bottle?
Much less, per unit. An 8 ml spray at the recommended 10% carries 0.8 g of oil; a 12 ml hanging bottle at the published 25% working ratio carries 3.0 g. So one 100 g pack makes 125 spray fills or 33 hanging bottles — a 3.79× difference in yield. In material cost the spray comes to about ₹47.95 a unit against ₹105.63 for the hanging bottle at the same oil's ₹11.95 a gram. That makes the pair a natural entry-and-premium ladder, and it means your oil purchasing is dominated by the hanging line: a thousand of each needs 3,024 g for the bottles against 800 g for the sprays.
Can I spray a car perfume onto the dashboard or seats?
Not on anyone's assurance, and certainly not on this page's. CSI publishes no compatibility data for car interior surfaces, and the two pages that say anything are cautions rather than approvals: the spray base page names screens, polished wood and unfinished leather as surfaces to avoid, and the car kit page says "for car use only" and to avoid direct contact with polished, plastic, or leather surfaces. So the honest answer is a spot test on your own components — a hidden patch, one spray, checked at 24 hours and a week — plus the vehicle manufacturer's own guidance, and a care card that repeats those cautions to your customer in writing.
How do I clean a spray pump between two different fragrances?
With the method the bottle page itself names: add a small amount of isopropyl alcohol, pump several times to flush the mechanism, then air dry completely before refilling. Isopropyl Alcohol Spray is ₹383 for 150 ML and ₹520 for 1 Litre — ₹2.553 against ₹0.520 a millilitre, so the litre is 4.91× cheaper per ml and the obvious buy for a production line. Do not use water, which the spray base page also warns against adding to the formula. And run the flush between every fragrance, because the alternative is your third scent carrying a trace of your first and a customer noticing before you do.
One oil, two formulas, two checklists
10% and a 12–24 hour rest in the spray. 25% and a 24–48 hour rest in the hanging bottle. Never the other way round.
8ml Glass Bottle with Spray and Cap ₹120 per pack of five = ₹24.00 each, publishing 0.1–0.12 ml per actuation and 65–80 sprays per fill; Room & Linen Spray Base 500 g ₹999 = ₹1.998 a gram, publishing 8–15% load, 10% recommended, 15% maximum and a 12–24 hour rest; Parfums De Marly Delina inspired 50 g ₹598, 100 g ₹1,195 at ₹11.95 a gram, 1 kg ₹11,952 with no 500 g rung; 12 ml wooden-cap hanging bottles ₹600 per pack of twelve, ₹50.00 each, stated Minimum Order 12 pcs; Isopropyl Alcohol Spray ₹383 / 150 ML and ₹520 / 1 Litre. Message us for bulk pricing, GST invoicing and documentation.
About this guide: Written by the CANDLEMAKINGSUPPLIESINDIA team. Product recommendations reflect the CSI range; the per-actuation arithmetic, the clouding ladder and the two-checklist test round apply to any supplier's materials.
Customer reviews: The reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on their product pages. Names, star ratings, dates and products are as recorded by Judge.me; wording is unedited.
Figures verified 26 October 2026: Prices — 8ml Glass Bottle with Spray and Cap ₹120 per pack of 5 = ₹24.00 each, 1,000 packs; Room & Linen Spray Base 500 g ₹999 = ₹1.998/g, 74 packs; Parfums De Marly Delina inspired 50 g ₹598 to 1 kg ₹11,952, cheapest gram ₹11.95 at 100 g, kilo ₹2 dearer than ten 100 g, no 500 g rung; 12 ml wooden-cap bottle pack ₹600 per 12 = ₹50.00 each, 4,960 packs; reed and car bases ₹1,099 per 500 ml = ₹2.198/ml, with Longevity at ₹1,296; Isopropyl Alcohol Spray ₹383 / 150 ML and ₹520 / 1 Litre; 50 ml room spray bottle ₹42.00. Arithmetic: spray 8 g fill at 10% = 7.2 g base + 0.8 g oil, so ₹14.39 + ₹9.56 + ₹24.00 = ₹47.95 a unit; hanging 12 ml at the 25% working ratio = 9 ml base + 3.0 g oil, so ₹19.78 + ₹35.85 + ₹50.00 = ₹105.63; oil per actuation = published output × load, giving 0.0080–0.0096 ml at 8%, 0.0100–0.0120 ml at 10%, 0.0120–0.0144 at 12% and 0.0150–0.0180 at 15%; cross-check 0.8 g ÷ 80 = 0.010 and 0.8 ÷ 67 = 0.012; sprays per fill 8 ÷ output = 80, 67, 27 and 16 at 0.10, 0.12, 0.30 and 0.50 ml; yields per 100 g of oil 125 spray fills or 33 hanging bottles (3.79×); 1,000 sprays = 200 bottle packs ₹24,000 + 15 base packs ₹14,985 + 800 g oil ₹9,560 = ₹48,545; 1,000 hanging units = 84 bottle packs ₹50,400 + 19 base packs ₹20,881 + 3,024 g oil ₹36,137 = ₹107,418; two-format trial ₹120 + ₹999 + ₹600 + ₹1,195 = ₹2,914; isopropyl ₹2.553 against ₹0.520 per ml = 4.91×. Published specifications: spray base 8–15% load, 10% recommended, 15% maximum, 12–24 hour rest, 90 g + 10 g worked example, order of addition, clouding remedy "reduce percentage and retest" with no water and fine-mesh filtration, surface cautions against screens, polished wood and unfinished leather, "Car Interiors" among applications, recommended sprayer 0.3–0.5 ml; 8 ml bottle 0.1–0.12 ml per actuation, 65–80 sprays per fill, fine-mist atomiser, leakproof when capped, refillable, isopropyl flush, glass inert against PET and HDPE which "absorb fragrance compounds… leach plasticisers", and 5–15% dilutions spray cleanly; reed and car bases "Blend with 10-30% fragrance oil", 25–30% working ratio, 24–48 hour rest; 12 ml bottle "Minimum Order: 12 pcs" and its wooden-lid absorb-and-release wording; car kit page "for car use only" and "avoid direct contact with polished, plastic, or leather surfaces". Page conflicts named, not resolved: 0.3–0.5 ml recommended sprayer against the 8 ml bottle's 0.1–0.12 ml output; the 12 ml bottle's title against its handle and body copy, which both say 20 ml; the 8 ml page's order button pointing to a different domain and a handle that does not resolve; the 50 ml bottle publishing no spray volume; and the kit page's longevity wording, unsupported elsewhere in the range and never repeated here as a specification. No throw, longevity, evaporation, heat-stability, density or scent-description figure is published for any CSI oil or base, and none is stated, estimated or implied here. Every figure mixing millilitres with grams is a hybrid convention and is labelled. Interior-surface compatibility is a test, never a claim. Prices and availability change — the linked product pages are always authoritative.