I Have Two Commercial Reed Diffuser Bases with Different Solvent Compositions — How Do I Compare Their Performance Without Knowing Every Proprietary Ingredient?
शेयर करना
Why not work it out from the ingredients? Because you won't get them all, and if you did, ratios and grades would still decide the result. Performance data answers the question your customer asks.
What is the test? Two oils from different families × two bases × three 100 g bottles = 12 bottles, weighed every 2–3 days for 14–30 days, sniffed blind, after a 7-day jar check.
What does CSI supply? One of the two bases, if you want ours as base Y, plus test oils, reeds and bottles. Our pages don't publish composition either: ₹3,611.54 for the CSI side with your own bottles.
- Straight answer: test the box, not the recipe
- Why ingredient guessing misleads
- The cause table: what really separates two bases
- The black-box protocol, stage by stage
- Documents to request, and what ours say
- Deciding, costing and the purchase step
- What to buy for the comparison, and what to skip
- Frequently asked questions
Why ingredient guessing misleads
It is natural to want the ingredient list: if you knew base X was mostly one glycol ether and base Y mostly a glycerol-ketal solvent, you could predict which throws harder. In practice you rarely get the full list, and even a full list leaves out what decides the result: the ratios, the grades, the minor components and how they interact with your oil. Two bases that look alike on paper can release fragrance at very different rates; two that look different can perform almost the same.
| The guess | Why it misleads | Measure instead |
|---|---|---|
| "Both list the same solvent, so they'll perform the same" | Grades, ratios and other components differ; the same name can sit in very different blends | Grams a day and blind throw, same oil, same bottle |
| "This one has more of a fast solvent, so it throws better" | Faster loss is not stronger throw; the carrier can leave ahead of the fragrance | Throw at 1 m against grams a day, both bases |
| "The SDS shows everything in it" | An SDS is written around hazards; it is not generally a full recipe | Treat it as a safety document, not a formula |
| "Clear means compatible" | Clear means dissolved today at this temperature | Cool jars for 7 days, then bottles for 14–30 days |
| "The dearer one must be better" | Price per ml says nothing about release, and density changes price per gram | Cost per bottle at measured density, against measured throw |
None of this means documents don't matter. They matter for safety, transport, labelling and claims, and they warn you when a base will need care. They just can't rank performance. For the list of specifications worth asking for before you even order samples, see the specs-before-samples post. If your real plan is to replace a proprietary base with a blend of your own, that comparison has its own risks and its own post: replacing a proprietary base with your own blend.
The cause table: what really separates two bases
This describes what makers commonly report, not CSI test data. The matrix design in the protocol below exists to separate the third row from the first two.
| Cause | What you would see | Discriminating check | Fix |
|---|---|---|---|
| Solvent system: release rate | One base loses weight much faster with both oils | Median grams a day per base, three bottles, both oils | Choose on band and throw together, not on speed |
| Solvent system: solubility | One base hazes with one oil only | Stage 1 jars, room and cool, 7 days | That base is out for that oil family, not necessarily for all |
| Fragrance load and oil character | Base X wins with the citrus oil, base Y with the spiced one | The 2 × 2 matrix: two oils × two bases | You may need one base per family (see the several-fragrances post) |
| Reed, bottle and fill | Bottles in one cell disagree; fills poured by ml | Fill by weight; same reed pack; same bottle model | Re-run the cell; don't read it |
| Environment | All bottles jump on hot days | Room log; all bottles on one shelf, rotated | Compare on the same day only |
| Process and lot | One base rested less, or a new lot arrived mid-test | Batch log: rest time, lot numbers | Same rest for both; one lot per base per run |
| Measurement error | Scores favour the base you already like | Blind codes; helper holds the key | Fix the method before reading results |
The black-box protocol, stage by stage
| Base X (your current base) | Base Y (e.g. Pure Performance) | |
|---|---|---|
| Bergamot Amber | 20 g oil + 80 g base X · ×3 | 20 g oil + 80 g base Y · ×3 |
| Apple Cinnamon | 20 g oil + 80 g base X · ×3 | 20 g oil + 80 g base Y · ×3 |
Why two oils? Because a base that wins with a citrus top note can lose with a spiced gourmand, and you sell more than one scent. If the ranking holds for both oils, you have a general answer; if it flips, you have a family answer, and the question becomes whether to run one base or two, which is the several-fragrances post. The general method for a fair two-arm comparison is in the DPG-versus-base comparison post; the carrier-odour screen for stage 0 is the low-odour post. Our live guide on testing a new base supplier before switching covers the supplier-switch side.
Documents to request, and what ours say
Ask both suppliers the same questions, in writing, and keep the answers with your test records:
| Ask for | Why |
|---|---|
| Current SDS | Hazard classification, handling, storage and transport information for the base; your finished-product assessment starts here |
| TDS or product sheet | Appearance, density, recommended fragrance load, any stated compatibility limits |
| Lot or batch number | On every pack you test, so a later lot can be checked against your retained sample |
| Storage and shelf life | Temperature, container and cap advice; how long an opened pack stays usable |
| Change notification | Will they tell you before the formula or a raw material changes? A black box that changes silently breaks your tests |
| Support for any claim you print | If you plan to print a no-alcohol or similar claim, you need written support from the supplier, not a guess |
What our pages say, and don't. Every in-stock CSI base page says "Blend with 10-30% fragrance oil"; the Pure Performance page adds "smooth even wicking", "No added fixatives" and to "rest for 24-48 hours before bottling". None states its composition, density, flash point, SDS or IFRA information in the text we captured. So if base Y is ours, it is as much a black box as base X, and the test treats it that way. Ask us on WhatsApp what technical data we can share; we will say plainly when the page is all there is. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol, and never claims a CSI base contains or excludes any of them. Larger-pack documentation (25 kg and above) is the 25 kg documentation post.
Deciding, costing and the purchase step
Here is how a finished sheet might look. The numbers are illustrative, made up to show the method, not CSI test data and not a prediction for any base. Grams a day are medians of three bottles; throw is the mean blind score at 1 m across four sniff days.
| Cell | Clear (jars + bottles) | g/day | Spread | Throw at 1 m | Gates |
|---|---|---|---|---|---|
| Bergamot Amber · base X | yes | 2.6 | ±9% | 3.1 | pass |
| Bergamot Amber · base Y | yes | 2.2 | ±12% | 2.9 | pass |
| Apple Cinnamon · base X | cool haze from day 4 | 2.4 | ±10% | 2.8 | fail (clarity) |
| Apple Cinnamon · base Y | yes | 2.1 | ±11% | 2.7 | pass |
Reading the example: with the citrus-led oil, base X edges ahead on throw, within a margin small enough that cost per bottle should break the tie. With the spiced oil, base X hazes in the cool jar from day 4 and is out, whatever its throw, while base Y holds. So the made-up answer is not "X is better" or "Y is better" but "X for this citrus, Y for this spiced oil, or Y for both if one base is simpler to run". Neither result needed a single ingredient name. Your real sheet may rank them the other way round; the reading method stays the same.
Cost per bottle needs your density. Pure Performance 500 ML is ₹2.20 a ml. At a worked density of 1.00 g/ml, 80 g of base is ₹175.84; at 1.05 g/ml it is ₹167.47: ₹8.37 a bottle from density alone, before any difference in performance. Do the same for base X with its price and your measured density, then add oil: ₹112.00 for 20 g of Bergamot Amber and ₹94.80 for 20 g of Apple Cinnamon at their 100 gm prices. The full per-kg comparison method is in our live guide on comparing base prices per kg with density.
The purchase step after a pass. Say the winning base goes into a first run of 50 bottles, 25 of each oil: 500 g of each oil, so one 500 gm of each (₹2,718.00 and ₹2,371.80). Reeds: 300, as three packs of 100 (₹2,400.00). Bottles: five Gold 120 ML packs (₹5,310.00). If base X won, the CSI side is ₹12,799.80 and base X comes from its supplier. If Pure Performance won, add eight 500 ML (₹8,792.00, 4,000 ml for 4,000 ml if your weighed density is near 1.0): ₹21,591.80. Material costs exclude labour, freight, packaging and GST. Keep a sealed retained sample of the winning lot.
Safety, plainly. Treat both bases as flammable until their SDS says otherwise, and don't assume two bases share a hazard profile because they look alike. Mix and store away from flames and heaters; keep test bottles away from candles. Wear gloves and eye protection; wash skin contact off with soap and water. Keep raw materials and bottles out of reach of children and pets, and wipe drips from varnished shelves at once. Labelling and courier rules depend on the full formula and where you sell; read every SDS and take advice. This is not legal advice.
What to buy for the comparison, and what to skip
Chosen on page statements, price and stock on 7 October 2026, not on performance data; CSI publishes none for its bases, reeds or bottles. Each card says when not to buy.
| Size | Price | Unit price | For this test |
|---|---|---|---|
| 100g | ₹325.00 | ₹3.25 a gram | stage 0 density and stage 1 jars (64 g); 36 g left |
| 500 ML | ₹1,099.00 | ₹2.20 a ml | stage 2: supplies 444 g if your weighed density is at least 0.89 g/ml |
| Size | Price | Per gram | For this test |
|---|---|---|---|
| 15 gm | ₹105.02 | ₹7.00 | smell check |
| 50 gm | ₹280.00 | ₹5.60 | with the 100 gm |
| 100 gm | ₹560.00 | ₹5.60 | with the 50: 136 g needed, 14 g spare |
| 500 gm | ₹2,718.00 | ₹5.44 | production |
| 1 kg | ₹5,437.00 | ₹5.44 | production |
| Size | Price | Per gram | For this test |
|---|---|---|---|
| 15 gm | ₹93.22 | ₹6.21 | smell check |
| 50 gm | ₹237.18 | ₹4.74 | with the 100 gm |
| 100 gm | ₹474.36 | ₹4.74 | with the 50: 136 g needed, 14 g spare |
| 500 gm | ₹2,371.80 | ₹4.74 | same per gram |
| 1 kg | ₹4,743.60 | ₹4.74 | same per gram |
| Pack | Price | Per reed | For this test |
|---|---|---|---|
| Pack of 25 | ₹236.00 | ₹9.44 | with the 50 |
| Pack of 50 | ₹400.00 | ₹8.00 | with the 25: 72 needed, 3 spare |
| Pack of 100 | ₹800.00 | ₹8.00 | same per reed as the 50 |
| Pack of 500 | ₹4,000.00 | ₹8.00 | production only |
| Size | Price | Units | Use |
|---|---|---|---|
| 100 ML | ₹300.00 | one | tare, pour 100 ml to the mark, weigh: your density |
| 250 ML | ₹600.00 | one | not needed here |
Skip for now: a second CSI base in the same run (two boxes are a comparison; three need 12 more bottles to stay fair); the 500 ML until the jars pass; the CSI HyperDiffusion Base™, out of stock on 7 October 2026; the Room & Linen Spray Base and the Ultrasonic Diffusion Concentrate Base™, which are not reed diffuser bases. Stages 0 and 1 alone cost ₹1,659.36 on the CSI side, a cheap way to see whether a full run is worth it.
CandleMakingSuppliesIndia sells the base, oils, reeds, beaker and bottles named here. Our base pages don't publish composition, and this page says so and tests our base as a black box like any other; it also tells you to keep your current base if it wins.
Every CSI price was checked on 7 October 2026, with stock checked per variant; everything priced here was in stock on that date, and the CSI HyperDiffusion Base™ is out of stock and not offered. Page wording is quoted and attributed to the page.
Solvent behaviour is described as general, hedged tendencies with no numeric flash points, viscosities, densities or evaporation rates for any material; the densities used in costing are worked examples for you to replace with your own weighings. The band, matrix and 50-bottle run are worked examples; nothing here is CSI test data. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Have DPG, DPM and IPM in My Workshop — Which One Should I Test First as a Reed Diffuser Carrier, and What Properties Should Guide the Choice?
- I Made Three Reed Diffusers Using DPG, DPM and an Augeo-Type Base at 20% Fragrance — How Do I Compare Them Using the Same Bottle and Reeds?
- My Oud Fragrance Is Clear in DPM but Hazy in My Ready-Made Base — Does This Mean DPM Will Necessarily Give Better Diffusion?
- I Made a Reed Diffuser with 20% Sandalwood Fragrance Oil and an Augeo-Type Base, but the Reeds Wick Slowly — What Should I Investigate?
- I Want to Make a Low-Odour Reed Diffuser — How Do I Compare the Carrier Odour of DPG, DPM, IPM and Commercial Bases Before Adding Fragrance?
- My Reed Diffuser Formula Works with DPM but Not with IPM — How Do I Determine Whether Solubility, Viscosity or Evaporation Is Responsible?
- I Want to Make a Reed Diffuser Without Ethanol — Which Technical Properties Should I Look for When Comparing DPM and Alcohol-Free Ready-Made Bases?
- How Do I Choose Between DPG, DPM, IPM and an Augeo-Type Reed Diffuser Base Using Controlled Tests for Solubility, Wicking, Throw, Evaporation, Stability and Cost?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Apple Cinnamon Fragrance Oil, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g). They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — PREETHI PRASATH, Shivalik Manak, Sooraj R, snehal Chaudhary, Thenirvaofficial. The reviews from Lalitha Jagan are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.
Figures verified 7 October 2026, CSI live pricing: Pure Performance Reed Base Oil 100g ₹325.00, 500 ML ₹1,099.00 (₹2.20 a ml); Bergamot Amber Fragrance Oil 15 gm ₹105.02 (₹7.00 a gram), 50 gm ₹280.00, 100 gm ₹560.00 (₹5.60 a gram), 500 gm ₹2,718.00, 1 kg ₹5,437.00 (₹5.44 a gram); Apple Cinnamon Fragrance Oil 15 gm ₹93.22 (₹6.21 a gram), 50 gm ₹237.18, 100 gm ₹474.36, 500 gm ₹2,371.80, 1 kg ₹4,743.60 (₹4.74 a gram from 50 gm up); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed from 50 up); Gold Reed Diffuser Bottle Pack of 10, 120 ML ₹1,062.00 (₹106.20 each); Silicon Measuring Beaker 100 ML ₹300.00, 250 ML ₹600.00; CSI HyperDiffusion Base™ ₹1,499.00 (out of stock). Per unit = pack price ÷ units, two decimals. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol.
Non-price figures: the reader's two bases are unnamed; 20 g + 80 g per 100 g, the 2 × 2 matrix, densities of 1.00 and 1.05 g/ml, the 0.89 g/ml threshold, the band and the 50-bottle run are worked examples, not data about any base. Solvent behaviour is general and hedged; no numeric flash points, viscosities or evaporation rates are quoted. "Blend with 10-30% fragrance oil", "smooth even wicking", "No added fixatives", "rest for 24-48 hours before bottling", "10-30% for reed diffusers", "Superior capillary action", "Consistent diffusion from day 1 to day 30" and both oils' notes are page wording. Costs exclude labour, freight, packaging and GST. Diwali 8 November 2026 and Christmas 25 December 2026 are calendar facts.