I Want to Make a Reed Diffuser Without Ethanol — Which Technical Properties Should I Look for When Comparing DPM and Alcohol-Free Ready-Made Bases?

I Want to Make a Reed Diffuser Without Ethanol — Which Technical Properties Should I Look for When Comparing DPM and Alcohol-Free Ready-Made Bases?

 

Pure Performance 100g ₹325.00 British Rose 100 gm ₹342.20 Fibre reeds 100 ₹800.00
Documents first · then 30 days of weights
Choose a no-ethanol carrier on evidence, not on the label.
★★★★★
"In past five years of testing and searching for the best candle fragrance I would say I found what am looking for strong fragrance in cold throw and hot throw and you can go for the minimum percentage in candle still it will give amazing smell well done and all the best"
Emma BecharaJun 2026
British Rose Fragrance Oil
★★★★★
"Fragrance oil is sooo good smell so good we love it a lot"
Arshad ShaikhVerified buyer · Mar 2026
British Rose Fragrance Oil
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
★★★★★
"Nice product"
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML)
★★★★☆
"I just tried it out , it's absolutely stunning. Super easy to use and such a life saver."
ThenirvaofficialVerified buyer · Mar 2026
Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g)
★★★★★
"I like it."
AshwiniSep 2025
British Rose Fragrance Oil
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. They are general reviews of the products named on each card, not assessments of the advice set out below. Wording is unedited.
✓ Prices verified 7 October 2026, stock checked per variant ✓ GST invoice; MSDS and IFRA documentation for oils on request ✓ CSI does not sell DPM, and says so
CSI Reed Diffusers · No ethanol · DPM
"No ethanol" is a fact you prove with an SDS and a written statement. "Works without ethanol" is a fact you prove with blanks, jars and 30 days of weights.
₹2,671.80
CSI side of a three-arm no-ethanol test with your own bottles (rose, base arm, 100 reeds) · CSI live pricing, October 2026
Quick answers — read this first
I want no ethanol in my reed diffuser. Which properties do I compare between DPM and an "alcohol-free" ready-made base? Nine: volatility, viscosity, solvency for your oil, carrier odour, flash point and hazard class, alcohol content, skin and eye handling, cap and plug contact, and cost. Four come from documents, four from your bench, one from both.

Does "no ethanol" mean "not flammable"? No. DPM and most diffuser solvents still carry a flammability classification on their SDS. Removing ethanol changes the hazard picture; it doesn't remove it. Read section 2 and section 9 of each SDS.

How do I verify an "alcohol-free" claim? In writing. Ask the supplier for the SDS and a signed statement of whether the base contains ethanol or other alcohols. Smell and appearance can't prove absence. CSI's base pages don't state alcohol content, so ask us before you make any claim.

Then what? A three-arm test: 20 g British Rose + 80 g carrier in DPM, in your alcohol-free base, and in a CSI base, three bottles each, plus carrier-only blanks, for 30 days. CSI side: ₹2,671.80 with your own bottles.
The short answer
Your plan: a reed diffuser with no ethanol, choosing between DPM (your supplier) and a ready-made base sold as alcohol-free. Worked formula: 20 g oil + 80 g carrier per 100 g (20%), 120 ml bottle, six fibre reeds.
Documents first: SDS for both carriers (hazard class, flash point, composition section), plus a written alcohol statement for the ready-made base.
Bench second: blank bottles for volatility, 24-hour reed uptake for viscosity, clarity jars for solvency, blotters for odour, then three bottles per arm for 30 days.
Your rule: pass clarity, the 30–45-day band (2–3 g a day), blind throw and documents; labelled as your in-house rule.
No ethanol: where does each answer come from? Nine properties to compare · DPM vs an "alcohol-free" ready-made base SDS Written Your bench statement / TDS jars, bottles, blotters Volatility (how fast it leaves the tip) Viscosity (how fast it climbs) Solvency for YOUR oil at YOUR load Odour of the carrier alone Flash point and hazard class Alcohol / ethanol content Skin and eye handling Cap, plug and bottle contact Cost per bottle and supply main source partial: a clue, not the answer not found there Read across each row: a property with no black dot in "Your bench" must still be documented before you sell. CSI base pages state no alcohol content, composition, flash point or SDS data; ask CSI on WhatsApp for documents.
Nine properties, three sources of evidence. Fire and handling facts live on the SDS; an alcohol claim needs a written statement; solvency, odour, uptake, release and packaging contact are settled only by your own jars and bottles. A filled dot is the main source; a half dot is a clue.
Straight answer
I want to make a reed diffuser without ethanol. Which technical properties should I look for when comparing DPM and alcohol-free ready-made bases?
Your situation, as stated: no ethanol in the formula, and two routes on the table: DPM bought as a solvent, or a ready-made base sold as alcohol-free. Worked here as 20 g of oil + 80 g of carrier per 100 g (20% by weight), a 120 ml bottle with a labelled 100 g fill and six fibre reeds. Compare nine properties. Volatility and viscosity decide whether the liquid climbs the reed and leaves it at a useful rate, which is the job ethanol used to help with. Solvency decides whether your oil stays dissolved. Odour decides whether the carrier competes with the scent. Flash point and hazard class, skin and eye handling, and alcohol content are documents, not smells: they come from each SDS and a written supplier statement. Cap and plug contact and cost per bottle finish the list. Verify the claim in writing, because a nose can't prove ethanol is absent. CSI's base pages don't state alcohol content, composition or flash point, so treat a CSI base as a performance arm and ask us for documents. Then test: three arms, three bottles each, carrier-only blanks, 30 days, weighed every 2–3 days. If DPM wins and its paperwork suits you, keep DPM; CSI doesn't sell it.
One line: "no ethanol" is a composition fact you prove with documents; "works without ethanol" is a performance fact you prove with blanks, jars and 30 days of weights.
The CSI side of the no-ethanol test: British Rose 2 × 100 gm + 50 gm ₹896.80 + Pure Performance 100g ×3 ₹975.00 + fibre reeds 100 ₹800.00 = ₹2,671.80 with your own bottles; ₹4,795.80 with two packs of Gold 120 ML bottles. Your DPM and your alcohol-free base come from your own suppliers. In stock on 7 October 2026.
Pure Performance 100g — ₹325.00

What ethanol was doing, and what replaces it

Take ethanol out and the carrier has to do the lifting on its own.

In many older reed formulas, ethanol is the fast part of the carrier. It thins the liquid, so it climbs the reed readily, and it evaporates quickly from the tips, pulling fragrance into the air with it. The price is a faster-emptying bottle and a higher flammability. That is why makers want it out: shipping, labelling, customer homes, and the sharp opening note some people dislike.

Removing ethanol leaves two jobs to the rest of the carrier: climbing the reed and releasing the fragrance at the tip. DPM is a glycol ether that is generally more volatile and thinner than DPG, which is why it is a common ethanol replacement. A ready-made "alcohol-free" base is a blend whose maker has made those choices for you. Neither is right or wrong by name. The properties below tell you which one suits your oil, your bottle and the product life you sell.

"Alcohol" is a broad word
Chemically, glycols and glycol ethers are alcohols too: DPG and DPM both carry hydroxyl groups. When a supplier says "alcohol-free", they usually mean "no ethanol" (and often no isopropanol). Ask what they mean in writing; it matters if you put the phrase on your own label, which is covered in the post on alcohol-free claims for sale.

If you are comparing DPM against DPG rather than against a ready-made base, the measurement list for that swap is in the DPM-instead-of-DPG post. Here the question is narrower: no ethanol, two candidate carriers, and how to compare them without being steered by a label.

The nine properties and where each answer comes from

Four live in documents, four on your bench, and volatility needs both.

Supplier documents tell you what a carrier is. Your bench tells you what it does with your oil, your reeds and your room. You need both, and you need to know which is which, because no SDS knows your fragrance and no bench test tells you a flash point. This post quotes no numeric flash points, viscosities or evaporation rates for any material; read them from your own suppliers' SDS and TDS.

The nine properties
Property → why it matters for reeds → where the document evidence is → your bench check
Property Why it matters Document evidence Your bench check
Volatility Without ethanol, the carrier alone carries scent off the reed tip. Too slow: weak room. Too fast: short life. TDS (relative evaporation rate, if given); SDS section 9 Carrier-only blank bottles, g/day
Viscosity Thicker liquids climb a reed more slowly. TDS; SDS section 9 (often blank) 24-hour reed uptake by weight
Solvency for your oil The oil must stay dissolved at your load, warm and cool. Nowhere: no sheet knows your oil Clarity jars at three temperatures, 14+ days
Odour of the carrier A carrier note competes with the fragrance. Sometimes "low odour" on a TDS Blind blotters at 1 h and 24 h
Flash point and hazard class Fire safety, storage, courier and labelling. SDS sections 2, 9 and 14 Not a bench test; read and compare
Alcohol content Your reason for switching, and any claim you make. Written supplier statement; SDS section 3 (partial) Not reliably testable by smell or eye
Skin and eye handling Gloves, goggles, spill and customer warnings. SDS sections 2, 4, 8 and 11 Not a bench test
Cap, plug and bottle contact Some solvents attack plastics and liners. Rarely documented 30-day contact with your cap and plug
Cost and supply A formula you can't rebuy is a hobby. Price list, pack sizes, lot documents Cost per bottle from your own weights

Reading the documents. A GHS-format SDS has 16 sections. Section 2 gives the hazard classification and pictograms; section 3 lists hazardous ingredients; section 9 gives physical properties such as flash point and, sometimes, vapour pressure or viscosity; section 14 covers transport. A technical data sheet (TDS), when a supplier has one, is where relative evaporation rate and viscosity usually appear. Compare evaporation figures only if both are measured against the same reference; otherwise compare your blanks instead.

Reading your bench. Volatility is the carrier-only blank: three bottles of plain carrier, six reeds, weighed every 2–3 days. Viscosity is a 24-hour reed uptake test by weight. Solvency is clarity jars warm, cool and at room temperature. Odour is blind blotters, the method in the carrier-odour post. Packaging contact is a cap and plug left in the liquid for 30 days and checked for swelling, softening or stains.

DPM against two kinds of ready-made base
What you know before testing, and what you still have to prove
DPM (your supplier) "Alcohol-free" base (your supplier) CSI base (page wording)
What it is One named substance; its SDS gives a CAS number A blend; composition usually partly disclosed A blend; page states no composition
Alcohol content Not an alcohol in the ethanol sense; check its SDS Only what the supplier puts in writing Not stated on the page; ask on WhatsApp
Flash point, hazard class On its SDS (section 9 and 2) On the blend SDS, if one exists Not in the text we captured; ask
Who tunes it You: carrier ratio, co-solvents, load The supplier; you choose the load CSI; you choose the load (page: 10-30%)
What you must prove Clarity, uptake, g/day, throw, stability The same five, plus the claim The same five; claims need documents
Where it can fail Your oil may not stay dissolved; odour Hidden co-solvents; lot changes Same as any blend: test before you sell
Don't do this: pick the carrier whose label sounds safest. "No ethanol" on a base and "low odour" on a solvent are both marketing until a document backs the first and a blotter backs the second. And don't read "no ethanol" as "not flammable": check each carrier's own hazard classification.

Checking an "alcohol-free" claim before you rely on it

You can't smell an absence. Ask for it on paper.

An SDS lists hazardous ingredients above reporting thresholds, not the full formula, so a short section 3 doesn't prove there is no ethanol. A written composition statement does: a dated note from the supplier on letterhead that says whether the base contains ethanol, isopropanol or other low-molecular-weight alcohols, and which lot it covers. Ask for both, and keep them with your batch records.

1
Ask for the SDS of each carrierDPM from your solvent supplier; the ready-made base from its maker. Check the product name and revision date match what you are buying.
2
Ask for a written alcohol statementFor the ready-made base: does it contain ethanol, isopropanol or any other alcohol, intentionally or as a carry-over? Ask for it per lot if lots change.
3
Compare hazard sections side by sideSection 2 pictograms and statements, section 9 flash point, section 14 transport. You're comparing classes, not choosing the bigger or smaller number on instinct.
4
Note what is missingNo SDS, no statement, or a statement that dodges the question: record it. A carrier you can't document is a carrier you can't sell with confidence.
5
Only then run the bench testDocuments settle what the carrier is; the three-arm test settles what it does. Both are needed before you scale.

About CSI's bases, plainly. In the text we captured, no CSI base page mentions alcohol or ethanol at all, and none states composition, density, flash point, SDS or IFRA information. Every in-stock page says "Blend with 10-30% fragrance oil". So we don't describe any CSI base as alcohol-free, and you shouldn't either on the strength of our page. Message us on WhatsApp for the SDS and a written answer for the base you are testing. If we can't give you the document you need, use a supplier who can. Comparing two blends without knowing every ingredient is the subject of the black-box comparison post.

"A label tells you what a supplier wants you to believe. A document tells you what they will stand behind."
— CandleMakingSuppliesIndia

If the no-ethanol diffuser is weak: the cause table

Weak throw after dropping ethanol is usually the carrier. Usually is not always.

This is what makers commonly report, not CSI test data. The table separates carrier choice, the oil and its load, reeds and bottle, the room and the measurement, so you change one thing at a time.

Cause table · no-ethanol diffuser, weak or short-lived
Cause → what you would see → discriminating check → fix
Cause What you would see Discriminating check Fix
Solvent choice: carrier too slow without ethanol Bottle loses little weight; reeds wet; room faint Carrier-only blank loses almost nothing too Test a more volatile carrier at the same load; don't raise the oil first
Solvent choice: carrier too fast Strong for a week, then thin; life short Blank loses weight much faster than your band A slower carrier or blend; fewer reeds as a second test
Fragrance load or oil character Carrier blank fine, the scented bottle weak Same carrier with a second, fresher oil Try 15/20/25% as a separate test, one carrier
Solubility Haze, layers or sediment after rest Clarity jars warm and cool; reverse mixing order Lower load or another carrier; never sell hazy
Reeds, bottle and fill One bottle weak, the others fine; old reeds dark Fresh-reed swap; check fill weight and reed depth Same reeds, same fill, same neck in every arm
Environment Results change with the weather or the AC Temperature and humidity logged at each weighing Compare arms on the same shelf on the same days
Measurement error "Weak" judged by one nose on one day Three bottles per arm; blind sniffs at fixed distance Fix the method before you judge the carrier

The two carrier rows point in opposite directions, which is why the carrier-only blank matters. If the blank barely loses weight, the carrier is slow and raising the oil won't fix it. If the blank empties far faster than your band, the bottle will die early whatever oil you use. Our live guide on fixing a weak reed diffuser systematically covers the reed and bottle rows in more depth.

Don't do this: drop the ethanol, raise the oil from 20% to 30% "to make up for it", and switch to a new base in the same batch. Three changes, one result, no answer. Worse, extra oil in a slow carrier often gives wet, saturated reeds and a faint room at a higher cost per bottle.

The three-arm test, by weight

Same oil, same load, same bottle, same reeds, same shelf. Only the carrier changes.

Three decision arms of three bottles each: A DPM, B your alcohol-free base, C a CSI base (Pure Performance; its alcohol content unstated). Every bottle is 20 g British Rose + 80 g carrier, mixed by weight in a tared beaker, rested 24–48 hours, filled to a labelled 100 g in a 120 ml bottle with six fibre reeds from one pack. Add carrier-only blanks of A and B, three bottles each, so you can see each carrier's own speed. That is 15 bottles and 90 reeds.

Arms and quantities
British Rose 216 g · Pure Performance 288 g · 15 bottles · 90 reeds
Arm Per bottle Bottles What it tells you
A · DPM 20 g rose + 80 g DPM 3 How DPM performs with your oil
B · your alcohol-free base 20 g rose + 80 g base B 3 How the documented ready-made base performs
C · CSI base 20 g rose + 80 g Pure Performance 3 A third reference; documents still to request
A0 · DPM blank 100 g DPM, no oil 3 DPM's own release rate and odour
B0 · base B blank 100 g base B, no oil 3 Base B's own release rate and odour
Stability jars 4 g rose + 16 g carrier, A/B/C 9 jars Room, warm shelf, cool shelf; 14+ days
1
Write your rule before day 0Labelled as your in-house rule, dated: clear in all three jar conditions at day 14 (extend to 28 before selling); bottle release inside 2–3 g a day (90 g usable over 30–45 days); the three bottles of an arm within about ±20% of their mean; blind throw at 1 m at least your chosen score on days 7, 14 and 28; documents complete.
2
Mix, rest, fill by weightTare the beaker, add 20 g oil, then 80 g carrier, stir the same way every time. Rest 24–48 hours. Fill each bottle to 100 g on the scale; write the start weight on its base.
3
Code the bottlesNumbers only on the shelf; a helper keeps the key. Rotate positions at every reading so no arm always sits by the window.
4
Weigh every 2–3 days for 30 daysSame time of day, same scale, reeds left in. Log room temperature and humidity. g/day = (start − today) ÷ days.
5
Sniff blind on days 3, 7, 14, 21 and 28Step in from fresh air, stand 1 m from each bottle, score 0–5. At least two noses if you can; nose fatigue is real.
6
Check jars and capsClarity, layers, sediment and colour in the stability jars at each sniff day; caps and plugs from the packaging test at day 30.
7
Decide on the whole recordAn arm must pass every gate. If two pass, choose on documents and cost per bottle; if none passes, the cause table tells you what to change next.

Thirty days is the minimum for a product you plan to sell; the full logging method is in our live guide on testing reed diffuser performance over 30 days. If an arm turns hazy, our live guide on cloudy mixing helps you tell process from formula. For a wider four-carrier comparison with a weighted scorecard, see the selection system post.

Why the blanks earn their place
If arm A releases at 2.5 g a day and its DPM blank at 2.4 g, almost all the weight loss is carrier, and the oil may be lagging behind. Whether faster evaporation is buying real throw is the question in the faster-but-not-stronger post. The blanks also give you a clean odour check: sniff A0 and B0 blind before you judge A and B.

After a pass: the purchase step

Buy for the arm that passed, and only after its documents are on file.

Money per bottle, for context. At British Rose's 1 kg price (₹3.07 a gram), 20 g of oil costs ₹61.40 a bottle (₹68.40 at the 100 gm price). A CSI 500 ml base at ₹2.20 a ml adds ₹175.84 for 80 ml, so the CSI-arm liquid is about ₹237.24 a bottle if your weighed density is near 1.0 g/ml. Your DPM and base B costs come from your own quotes. Material costs exclude labour, freight, packaging and GST. Whether a dearer base pays for itself is worked through in the cost-per-bottle post.

A first run of 50 bottles. Oil: 1,000 g of British Rose. The 1 kg (₹3,068.00) is ₹118.00 cheaper than two 500 gm (₹3,186.00), so buy the 1 kg; your 34 g test spare covers spills. Reeds: 300, as three packs of 100 (₹2,400.00). Bottles: five Gold 120 ML packs (₹5,310.00). If DPM or your base B won, the CSI side is ₹10,778.00. If the CSI base won and its documents satisfied you, 50 × 80 = 4,000 ml, about eight 500 ML (₹8,792.00) once you have weighed 100 ml: ₹19,570.00. CSI lists no 25 kg base; ask on WhatsApp for larger volumes.

Against our own interest: if DPM passes every gate and its SDS suits your shipping and labels, keep DPM; we don't sell it and won't pretend our base is always better. If you need a written alcohol statement and we can't provide one for the base you tested, don't buy eight 500 ML on hope. And don't buy our 500 gm rose for this test: the 100 + 100 + 50 route is ₹696.20 cheaper.
Diwali is 8 November 2026. A 30-day test started in the second week of October ends after Diwali, so a no-ethanol range for Diwali gifting is already late; plan it for Christmas (25 December 2026) instead. Message us your run size to confirm stock, dispatch and a GST invoice.
WhatsApp a stock check

What we don't sell. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol. The only alcohol in our catalogue is an Isopropyl Alcohol Spray, a cleaner for tools and glass, never a diffuser ingredient. Our route is the base arm, oils, fibre reeds, bottles and beakers.

Safety, plainly. Treat every carrier and every finished formula as flammable until its SDS says otherwise; keep diffusers away from candles, burners and heaters. Wear gloves and eye protection when mixing; wash skin contact off with soap and water. Keep raw materials and finished diffusers out of reach of children and pets, and wipe spills from varnished furniture at once. Hazard labelling and courier rules depend on the full formula and where you sell; the documentation side is covered in the safety-documentation post. This is not legal advice.

What to buy for the test, and what to skip

Chosen on page statements, price and stock on 7 October 2026, not on performance data; CSI publishes none for its bases, reeds or bottles. Each card says when not to buy.

1
fragrance oil · the test oil
British Rose Fragrance Oil
One oil keeps the comparison about the carrier. The page describes "fresh, dewy rose petals with subtle green undertones and a soft floral finish" and lists "reed diffusers (10-30%)" among its uses; a light, fresh floral also shows quickly whether a carrier without ethanol can lift top notes off the reed. Buy by the test, not by the per-gram price: two 100 gm and one 50 gm give 250 g for a 216 g test at ₹896.80; the 500 gm would cost ₹696.20 more.
Size Price Per gram For this test
15 gm ₹94.40 ₹6.29 blotter checks only
50 gm ₹212.40 ₹4.25 with two 100 gm: 250 g for the 216 g test
100 gm ₹342.20 ₹3.42 buy two for the test
500 gm ₹1,593.00 ₹3.19 ₹696.20 more than the 100 + 100 + 50 route for this test
1 kg ₹3,068.00 ₹3.07 the first production run; ₹118.00 less than two 500 gm
Test oil: ₹896.80. Buy 100 gm — ₹342.20
2
ready-made base · arm C, alcohol content unstated
Pure Performance Reed Base Oil 100g
The CSI arm. The page says "No added fixatives", "smooth even wicking" and "Blend with 10-30% fragrance oil". It does not say whether the base contains ethanol or any alcohol, and it publishes no composition, density, flash point or SDS in the text we captured. So it enters your test as a performance arm only; it cannot carry an "alcohol-free" claim for you until CSI supplies documents on WhatsApp. If you want the floral-positioned base instead, the Lift Base page says "Best with floral, citrus, green, and fruity fragrance families" at ₹1,099.00 for 500 ml, with the same documentation gap.
Size Price Unit price For this test
100g ₹325.00 ₹3.25 a gram three: 288 g needed, 12 g spare
500 ML ₹1,099.00 ₹2.20 a ml ₹124.00 more than three 100g; more spare if you repeat the test
Arm C: ₹975.00. Buy 100g — ₹325.00
3
fibre reeds · same reeds in every bottle
Fiber Diffuser Reeds (Black)
Fifteen bottles at six reeds each need 90 reeds from one pack, so every arm draws on the same lot. The page gives the length as 20.3 cm, no diameter, and claims "Superior capillary action" and "no swelling, no clogging"; treat both as claims your blanks will test. CSI sells fibre reeds, not rattan. Packs of 50, 100 and 500 are all ₹8.00 a reed, so the 500 saves nothing per reed.
Pack Price Per reed For this test
Pack of 25 ₹236.00 ₹9.44 too few on its own
Pack of 50 ₹400.00 ₹8.00 too few on its own
Pack of 100 ₹800.00 ₹8.00 90 needed, 10 spare
Pack of 500 ₹4,000.00 ₹8.00 production only; same per reed
Reeds: ₹800.00. Buy 100 — ₹800.00
4
bottles · identical vessels
Gold Reed Diffuser Bottle Pack of 10
A fair test needs identical bottles: same neck, same height of liquid, same reed depth. Each 120 ML bottle holds a labelled 100 g fill. The page also says "Size: 50 and 100ml", which doesn't match the 120 ML variant name, and states no neck size, so check that your caps and reeds fit before day 0. If you already own fifteen identical bottles, use them.
Variant Price Per bottle For this test
120 ML · Pack of 10 ₹1,062.00 ₹106.20 two packs: 15 bottles needed, 5 spare
50 ML · Pack of 10 ₹826.00 ₹82.60 smaller product; not this test
Two packs: ₹2,124.00. Buy 120 ML — ₹1,062.00
5
tools · weigh, don't pour by eye
Silicon Measuring Beaker 100 ML
Each batch is mixed by weight on a tared beaker: 20 g oil, then 80 g carrier. The Candle Making Weighing Scale page says "grams or ounces" and states no capacity or resolution; weigh one bottle five times before day 0, and if readings wander by more than 0.1 g, use a jeweller's scale for the daily weights. Skip both if your bench already has a beaker and a scale that reads 0.1 g.
Item Price Units Use
100 ML beaker ₹300.00 one mix each 100 g batch
Weighing scale ₹354.00 one resolution not stated: check it reads 0.1 g
Tools: optional. Buy beaker — ₹300.00

Skip: the CSI HyperDiffusion Base™, out of stock on 7 October 2026; the Room & Linen Spray Base and the Ultrasonic Diffusion Concentrate Base™, which are not reed diffuser bases; the Isopropyl Alcohol Spray as an ingredient. With beaker and scale, the whole CSI side is ₹5,449.80.

The CSI principle
Prove "no ethanol" on paper and "works without ethanol" on the scale.
SDS and a written statement for each carrier; then three arms, three bottles each, blanks and 30 days of weights. CSI side: ₹2,671.80 with your own bottles.
Why trust this guide

CandleMakingSuppliesIndia sells the rose oil, base, reeds, bottles and tools named here. It does not sell DPM, DPG, IPM, Augeo-type solvents or perfumer's alcohol, and says so. It does not describe its own bases as alcohol-free, because its pages don't state alcohol content, and it tells you to keep DPM if DPM wins.

Every CSI price was checked on 7 October 2026, with stock checked per variant; the CSI HyperDiffusion Base™ is out of stock and is not offered. Page wording is quoted and attributed to the page.

Solvent behaviour is described as general, hedged tendencies with no numeric flash points, viscosities, densities or evaporation rates. The formula, arms, band and 50-bottle run are worked examples; nothing here is CSI test data. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.

Frequently asked questions

Can I make a reed diffuser without alcohol?
Yes. Many diffusers use glycol-ether or other solvent carriers instead of ethanol. The carrier then has to climb the reed and release fragrance on its own, so test it with carrier-only blanks and 30 days of weights.
Is DPM better than an alcohol-free reed diffuser base?
Neither is better by name. Compare volatility, viscosity, solvency for your oil, odour, hazard class and cost, then run three bottles of each with the same oil and reeds for 30 days.
Is a reed diffuser without ethanol still flammable?
It can be. DPM and many diffuser solvents still have a flammability classification. Read section 2 and section 9 of each SDS and keep diffusers away from flames.
How do I know a reed diffuser base is really alcohol-free?
Ask the supplier for the SDS and a written, dated statement of whether it contains ethanol or other alcohols, per lot. An SDS alone lists only hazardous ingredients above thresholds.
Do CSI reed diffuser bases contain alcohol?
CSI's base pages don't state alcohol content, composition or SDS data in the text captured. Ask CSI on WhatsApp for the SDS and a written answer before making any claim.
What fragrance load should I use in a no-ethanol diffuser?
Start at 20% by weight (20 g oil + 80 g carrier) as your reference, and test lower or higher loads as a separate arm. CSI base pages say "Blend with 10-30% fragrance oil".
No ethanol, two carriers
Get the documents, then let 30 days of weights choose the carrier.
The CSI side is ₹2,671.80 with your own bottles: British Rose 2 × 100 gm + 50 gm, Pure Performance 100g ×3 and 100 fibre reeds. Ask us for the base SDS and an alcohol statement first. If DPM wins, keep it.
Shop Pure Performance 100g Check test-kit stock on WhatsApp
Editorial standards & sources
About this guide: part of CSI's cluster "Comparing DPM, IPM and Augeo-Type Solvents" (8321–8340). It owns the property list for choosing a no-ethanol carrier (DPM against ready-made bases sold as alcohol-free), where each property's evidence comes from, how to check an "alcohol-free" claim with documents, and a three-arm test with carrier-only blanks. Claims printed on products for sale are 8393; black-box base comparison is 8336.

Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — British Rose Fragrance Oil, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g). They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Arshad Shaikh, Sooraj R, snehal Chaudhary, Thenirvaofficial. The reviews from Emma Bechara, Ashwini are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.

Figures verified 7 October 2026, CSI live pricing: British Rose Fragrance Oil 15 gm ₹94.40, 50 gm ₹212.40 (₹4.25 a gram), 100 gm ₹342.20 (₹3.42 a gram), 500 gm ₹1,593.00 (₹3.19 a gram), 1 kg ₹3,068.00 (₹3.07 a gram); Pure Performance Reed Base Oil 100g ₹325.00, 500 ML ₹1,099.00 (₹2.20 a ml); Lift Base 500 ml ₹1,099.00; Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed from 50 up); Gold Reed Diffuser Bottle Pack of 10, 120 ML ₹1,062.00 (₹106.20 each), 50 ML ₹826.00 (₹82.60 each); Silicon Measuring Beaker 100 ML ₹300.00; Candle Making Weighing Scale ₹354.00; CSI HyperDiffusion Base™ ₹1,499.00 (out of stock). Per unit = pack price ÷ units, two decimals. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol; Isopropyl Alcohol Spray is a cleaner.

Non-price figures: the no-ethanol goal and the two carriers are the reader's; 20 g + 80 g, the 120 ml bottle with a 100 g fill, six reeds, the arms, the 30–45-day band, ±20%, the score scale and the 50-bottle run are worked examples. Base ml are treated as grams only after you weigh 100 ml. Solvent properties are general tendencies; no numeric flash points, viscosities, densities or evaporation rates are quoted, and SDS section numbers refer to the common 16-section GHS format. "Blend with 10-30% fragrance oil", "No added fixatives", "smooth even wicking", "Best with floral, citrus, green, and fruity fragrance families", "reed diffusers (10-30%)", "Superior capillary action", "no swelling, no clogging" and "Size: 50 and 100ml" are page wording. Augeo is a trademark of Solvay; "Augeo-type" describes a solvent class. Costs exclude labour, freight, packaging and GST. Diwali 8 November 2026 and Christmas 25 December 2026 are calendar facts.
Back to blog