I Mixed IPM with a Floral Fragrance Oil, but the Diffuser Has Poor Room Throw — Should I Investigate Carrier Volatility Before Increasing Fragrance Load?

I Mixed IPM with a Floral Fragrance Oil, but the Diffuser Has Poor Room Throw — Should I Investigate Carrier Volatility Before Increasing Fragrance Load?

 

Lift Base 500 ml ₹1,099.00 Japanese Cherry Blossom 100 gm ₹500.00 Black fibre reeds 100 ₹800.00
IPM + floral · faint room
Find out whether the IPM is holding your floral back before you pay for more oil.
★★★★★
"Happy with the product ✨️"
Judy RoyVerified buyer · Dec 2025
Lavender Fragrance Oil
★★★★☆
"Fragrances are pretty decent , quite versatile."
Tina RahaVerified buyer · Jun 2025
Lavender Fragrance Oil
★★★★★
"I am really happy with this fragrance.Its absolutely overwhelming fragrance. I used it in champagne candle and received a very positive review from my customer."
Ranjita RAOVerified buyer · Feb 2026
Orchard Pear
★★★★★
"I like it."
AshwiniSep 2025
British Rose Fragrance Oil
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
★★★★☆
"I just tried it out , it's absolutely stunning. Super easy to use and such a life saver."
ThenirvaofficialVerified buyer · Mar 2026
Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g)
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. They are general reviews of the products named on each card, not assessments of the advice set out below. Wording is unedited.
✓ Prices verified 7 October 2026, stock checked per variant ✓ GST invoice; MSDS and IFRA documentation for oils on request ✓ CSI does not sell IPM or DPG, and says so
CSI Reed Diffusers · IPM
A faint floral in an IPM blend is usually a slow carrier, not a weak oil. Weigh it, fix release at the same load, and test more oil only where it can leave the reed.
₹22.70
extra per bottle for 25% in the same IPM formula (worked), with the slow carrier unchanged · CSI live pricing, October 2026
Quick answers — read this first
I mixed IPM with a floral oil and the diffuser has poor room throw. Should I check the carrier before raising the fragrance? Yes. IPM is an oily, very low-volatility ester that tends to slow evaporation, so the first suspect is release, not load. Weigh the bottle: if it loses far less than your product life needs (worked: 0.9 g a day against a 2.00–3.00 g band), more oil in the same slow carrier usually means a dearer bottle that is still faint.

What is the test? Four arms at the same 20% floral, three bottles each: your formula (30 g IPM), IPM cut to 10 g, no IPM, and a ready-made floral-positioned base. Weigh every 2–3 days for 14–30 days; blind sniffs on days 7, 14 and 21.

When do I raise the load? Only if the best carrier arm reaches your band and is still faint. Then test 20% against 25% in that carrier.

What does CSI supply? Not IPM or DPG. For the arms: Lift Base 500 ml ₹1,099.00, Black fibre reeds 100 ₹800.00, Gold 120 ML bottles; ₹4,023.00 with your own floral.
The short answer
Your formula: 20 g floral + 30 g IPM + 50 g DPG (37.5% of the carrier is IPM), 6 fibre reeds, 120 ml bottle. Worked example.
The number that decides: 0.9 g a day lasts about 100 days. Far slower than a 30–45 day product needs, so the carrier is holding the scent back.
Volatility first: cut IPM, remove IPM, try a base, all at 20%. The cheapest arm that reaches the band and smells stronger wins.
The wrong fix: 25% in the same formula costs ₹22.70 more a bottle (worked) and leaves the slow carrier in place.
IPM + floral, faint room: volatility before load Worked formula 20 g floral + 30 g IPM + 50 g DPG · every arm 3 bottles, 6 reeds, same room Gate 0 · weigh the bottle you have 0.9 g a day against a 2.00–3.00 g band: release is too slow, so suspect the carrier first Stage 1 · same 20% floral, four carriers A · as made 30 g IPM + 50 g DPG B · IPM cut 10 g IPM + 70 g DPG D · no IPM 0 g IPM + 80 g DPG C · base arm 80 g Lift Base Gate 1 · any arm in band AND stronger at the door on days 14 and 21? Yes: the carrier was the limit. Stop here and keep the cheapest passing arm. only if the best arm is in band but still faint Stage 2 · the load, in the winning carrier only 20% against 25%, three bottles each, 14–30 days Liquid cost per 100 g bottle · worked example Japanese Cherry Blossom at the 1 kg price; IPM ₹600.00 and DPG ₹300.00 a kg are placeholders: use your invoices A ₹129.80 B ₹123.80 D ₹120.80 C ₹272.64 A at 25% ₹152.50 "A at 25%" is the fix makers try first: ₹22.70 more a bottle, with the slow carrier unchanged. Excludes reeds, bottle, labour, freight, packaging and GST. Pass or fail is your test, not CSI data.
Weigh first. If the bottle is releasing far below the band your product life needs, change the carrier at the same 20% load, in four arms. Raise the load only if the best carrier arm reaches the band and is still faint, and only in that carrier. The cost strip shows what the usual first fix, more oil in the same formula, adds to every bottle without touching release.
Straight answer
I mixed IPM with a floral fragrance oil, but the diffuser has poor room throw. Should I investigate carrier volatility before increasing fragrance load?
Yes, and in that order. Worked formula: 20 g floral oil + 30 g IPM + 50 g DPG per 100 g (20% oil), in a 120 ml bottle with 6 fibre reeds; weighed from day 7 to day 21 it loses 0.9 g a day. Your title gives no figures, so use yours. IPM is an oily, very low-volatility ester; it dissolves many fragrance materials but tends to slow evaporation, and DPG is slow too. A floral that can't leave the reed tips can't reach the room, whatever the percentage. So first compare the release you have with the release your product needs: about 2.00–3.00 g a day for 90 g over 30–45 days. At 0.9 g a day the bottle would last about 100 days, which says the carrier is the bottleneck. Then test carriers at the same 20%: your formula, IPM cut to 10 g, no IPM, and a ready-made base positioned for florals, three bottles each, 14–30 days, blind sniffs on days 7, 14 and 21. Raise the load only if the best carrier arm reaches the band and still smells faint, and then only in that carrier. CSI doesn't sell IPM or DPG; Lift Base is one arm, not a promised fix.
One line: a faint IPM floral is usually a slow carrier, not a weak oil; weigh it, fix release at the same 20%, and test 25% only in a carrier that already releases at the rate you need.
Stage 1, priced: Lift Base ₹1,099.00 + Black fibre reeds 100 ₹800.00 + two Gold 120 ML packs = ₹4,023.00 with your own floral; ₹5,523.00 with three Japanese Cherry Blossom 100 gm. In stock on 7 October 2026. IPM and DPG are from your own supplier.
Lift Base — ₹1,099.00

Gate 0: weigh before you add anything

"Poor throw" is a smell. "0.9 g a day" is a diagnosis.

Your situation, restated: a reed diffuser where you have mixed IPM into the carrier with a floral fragrance oil, and the room barely smells of it. Our worked formula is 20 g floral + 30 g IPM + 50 g DPG per 100 g, so IPM is 37.5% of the carrier; the bottle is a 120 ml Gold bottle with a weighed 100 g and 6 fibre reeds of 20.3 cm. If your IPM share is lower, the logic is the same, with a smaller expected effect.

Before any new mix, put a number on "poor". Weigh the whole diffuser now and again every 2–3 days for a week or two, on the same scale, at the same time of day. Grams a day = weight lost ÷ days, taken from day 7 onwards so the reeds' initial soak doesn't count. Then compare it with what your product needs. With about 90 g usable in a 100 g fill, a 30-day product needs about 3.00 g a day and a 45-day product about 2.00. A bottle releasing 0.9 g a day would take about 100 days to empty. That is not a long-lasting diffuser; it is a slow one.

Gate 0 · what the weight tells you before you touch the load
Worked band 90 g over 30–45 days · in-house reading, not a standard
Your grams a day What it suggests First move
Well below 2.00 (e.g. 0.9) Release is the bottleneck: carrier too slow Stage 1: carrier arms at the same 20%
Inside 2.00–3.00 Release is adequate; the scent may be light Stage 1 still, then stage 2 if the best arm is faint
Above 3.00 Fast but faint: not an IPM-speed problem See the faster-but-not-stronger diagnosis (link below)

If your bottle is fast and faint rather than slow and faint, the IPM is probably not the issue; the faster-but-not-stronger post covers that pattern. If you are still deciding whether IPM belongs in the formula at all, the full four-stage evaluation is the IPM compatibility and wicking post.

Why more oil rarely fixes a slow carrier

Adding fragrance to a carrier that won't let it go is paying for scent that stays in the bottle.

A reed diffuser works in three steps: the liquid climbs the reed, the liquid at the tip evaporates, and the vapour spreads through the room. IPM affects the middle step most. Being oily and very slow to evaporate, it tends to stay at the reed tip while lighter materials leave, and it can hold back some of the fragrance with it. Florals add their own difficulty: many floral accords rely on a fresh, light top and a soft heart that are pleasant up close but modest in projection, so they need a carrier that releases freely.

Raising the load from 20% to 25% changes how much fragrance is in the liquid, but not how fast the liquid leaves the reed. If release is the bottleneck, a 25% bottle in the same carrier tends to smell a little stronger at the bottle and only slightly stronger at the door, while costing more and carrying a higher share of a material that, for many oils, makes the blend heavier still. Our DPG cluster found the same pattern with lavender: raising the percentage didn't move the throw, as the 25% lavender post explains. IPM tends to make that pattern sharper, not milder.

Don't do this: go from 20% to 25% to 30% oil in the same IPM formula, a week at a time. Each step costs more oil per bottle, each is judged too early, and if the last one "works" you won't know whether it was the load, the season or the extra weeks of soaking. Fix release at the same load first; change one thing per round; give each round 14–30 days.

There is a cost side too. In our worked example, 25% in the same formula costs ₹152.50 a bottle in liquid against ₹129.80 for your 20% formula: ₹22.70 more, on every bottle, for a fix that leaves the bottleneck in place. On a 100-bottle run that is ₹2,270.00. IPM and DPG prices in that sum are placeholders (₹600.00 and ₹300.00 a kg); use your invoices.

The cause table

Two rows are about volatility. The rest are why a volatility test can mislead.

Rows are grouped, not ranked. "What you would see" is common bench experience and general solvent behaviour, hedged; it is not CSI data.

Cause table · 20 g floral + 30 g IPM + 50 g DPG, poor room throw
Cause → what you would see → discriminating check → fix
Cause What you would see Discriminating check Fix
Carrier volatility: too much IPM Grams a day well under your band (0.9 worked); reeds wet, room faint Arms B and D: same oil, less or no IPM Cut IPM; keep the cheapest arm that reaches the band
Carrier volatility: DPG as well Arm D (no IPM) still slow and faint Arm C (Lift Base) against arm D A different carrier, not more oil
Fragrance load Best carrier arm in band, smells clean but light Stage 2: 20% against 25% in that carrier Raise load only if 25% is clearly stronger
Floral character Soft florals read as "pleasant up close, gone at the door" Blind sniffs at the door and 1 m on days 7, 14, 21 A second floral as a confirmation arm
Solubility and stability A faint oily haze or film in the IPM arms 20 g in clear glass at room and cool, 7 days Settle clarity first (link below)
Reeds Glossy, slow tips after two weeks Fresh-reed swap in one bottle on day 14 Fresh reeds; never reuse IPM reeds in a new arm
Room and climate Faint in an air-conditioned room, better in a warm one Log temperature; all arms on one shelf Compare side by side, not across rooms
Measurement error Throw judged by one person walking past Coded bottles, closed room, 30 min, fresh nose Scores on paper before the code is revealed

If the IPM arms show haze or an oily film, settle that before reading throw: a blend that isn't fully mixed can hold fragrance back for reasons that have nothing to do with volatility. Testing the carriers without fragrance first is the IPM haze post. Our live guide on fixing a weak reed diffuser systematically covers reeds, bottle geometry and room conditions in more depth.

Stage 1: four carriers at the same load

Same floral, same 20%, four carriers. The weights and the noses decide.
Stage 1 arms · 100 g per bottle · three bottles each
12 bottles · floral 240 g · IPM 120 g · DPG 600 g · Lift Base 240 ml · 72 reeds
Arm Per 100 g bottle Changes Question it answers Liquid cost (worked)
A · as made 20 g floral + 30 g IPM + 50 g DPG nothing Your baseline, measured ₹129.80
B · IPM cut 20 g floral + 10 g IPM + 70 g DPG IPM down two-thirds Does less IPM release more? ₹123.80
D · no IPM 20 g floral + 80 g DPG IPM removed Is IPM the bottleneck, or DPG too? ₹120.80
C · base arm 20 g floral + 80 g Lift Base carrier type Does a floral-positioned base release better? ₹272.64

Arm D is the one makers skip and shouldn't. If B and D both release more than A and smell stronger, IPM was the brake. If D is still slow and faint, DPG is a second brake, and only arm C (or a faster carrier of your own, which is a different post) can tell you what a freer-releasing carrier does for this floral. Liquid costs use the Japanese Cherry Blossom 1 kg price and the placeholder solvent prices; base cost treats 80 ml as 80 g only if your weighed density is near 1.0 g/ml.

1
Write your rule firstDated and on paper: the band (2.00–3.00 g a day in our example), how much stronger at the door counts as "better" on days 14 and 21, and clarity at room and cool. Labelled as your in-house rule.
2
Mix four masters by weightCarrier first, then oil, same stir time. For A and B weigh IPM and DPG separately into the beaker before adding oil. Label each with the lots. Rest 24–48 hours; the Lift page asks for a rest before bottling, so all arms get the same.
3
Fill, reed and weigh day 0Three bottles per arm, 100 g each by weight. 6 fresh reeds per bottle from one pack. Weigh each whole diffuser and code bottles 1–12.
4
Weigh every 2–3 daysSame scale, same time; rotate shelf positions; log temperature and humidity. Steady grams a day from day 7.
5
Sniff blind on days 7, 14 and 21One coded bottle at a time in a closed room for 30 minutes; score 0–5 at the door and at one metre; describe the floral. Write it down before the code is revealed.
6
Check clarity weekly; swap reeds onceHaze, film or a ring fails the arm. On day 14, put fresh reeds in one bottle per arm and note whether release and smell jump.
Your decision rule (in-house, labelled)
(1) Release: median steady grams a day inside your band. (2) Throw: at least one point (of 5) above arm A at the door on days 14 and 21. (3) Clarity: clear at room and cool throughout. (4) Agreement: three bottles within about ±20% of their average. (5) Cheapest passing arm wins; if none passes on throw but one passes on release, go to stage 2 in that carrier. Thresholds are suggestions; date and own yours.

For a printable 30-day log with reed-condition and room columns, use our live guide on testing reed diffuser performance over 30 days; this page only sets the arms and the order.

Safety, plainly. IPM, DPG and fragrance oils each have their own SDS; read them for hazard class and handling. Mix in a ventilated room away from flames, wear gloves and eye protection, wash skin contact off with soap and water, and wipe oily spills from floors and furniture at once. Keep bottles away from children, pets, candles and heaters. A higher fragrance load changes the finished formula, and hazard labelling depends on the full formula; take advice on the rules for what you sell. This page is not legal advice.

Stage 2: the load, only if it earns a test

Load is the last lever, pulled in the carrier that already works.

Run stage 2 only if one carrier arm passed on release but not on throw: it lets the floral leave at the right rate, and the room is still light. Then the load is a fair question. Two arms in that carrier, three bottles each: 20 g and 25 g of the floral per 100 g, everything else identical. Oil needed: 135 g; reeds: 36; the spare Gold bottles from stage 1 cover the 6 bottles. If Lift Base was the winner, note that one 500 ml bottle leaves only 260 ml after stage 1, so stage 2 needs a second bottle.

Stage 2 · load in the winning carrier
Oil at the Japanese Cherry Blossom 1 kg price · liquid only
Arm Per 100 g bottle Oil cost Passes if…
20% (control) 20 g floral + 80 g winning carrier ₹96.80 baseline
25% 25 g floral + 75 g winning carrier ₹121.00 at least one point stronger at the door on days 14 and 21, still clear

If 25% is not clearly stronger in a carrier that releases properly, the oil is at its natural level for passive diffusion, and a different floral is the next test, not 30%. Both 20% and 25% sit inside the "10-30% for reed diffusers" range stated on the Japanese Cherry Blossom page; that range is a supplier range, not a performance promise.

Don't do this: run stage 2 in your original IPM formula "to save time". The result would tell you how a slow carrier responds to more oil, which you already suspect. Stage 2 belongs only in a carrier that passed release in stage 1.

Reading the result, and the purchase step

The cheapest arm that passes both release and throw is the answer.
Outcome patterns · median of three bottles per arm
Assumes every arm stayed clear
Pattern What you see What it means What to do
1 B passes Too much IPM; a little is tolerable Use 10 g IPM; it also saves ₹6.00 a bottle (worked)
2 D passes, B doesn't IPM itself was the brake Drop IPM from this floral
3 Only C passes Your DPG-based carrier is slow for this floral Confirm C with a second floral, then switch
4 B, C or D in band but faint Release fixed; the load is now the question Stage 2 in that carrier
5 Nothing reaches the band Room, reeds or a very slow set-up Fresh reeds, warmer room check; rerun
6 Bottles disagree widely Process or measurement Check fills, reeds, positions; rerun

Argued against our own interest: patterns 1 and 2 mean you buy nothing from us for the carrier, and that is a good outcome. We don't sell IPM or DPG, and if cutting IPM in your own blend fixes the throw, keep it; it is cheaper than Lift Base by ₹142.84 a bottle at our worked prices. Lift Base earns its place only in pattern 3, after a confirmation round with a second floral. We won't pretend a base always beats a tested blend.

The purchase step after a pass

Worked example, 100 bottles at 20%: 2,000 g of floral. For Japanese Cherry Blossom, two 1 kg packs (₹9,684.00) are cheaper than four 500 gm (₹10,000.00) by ₹316.00, because only the 1 kg drops below ₹5.00 a gram. Reeds: 600 at six a bottle, six Black packs of 100 (₹4,800.00), flat per reed. Bottles: ten Gold 120 ML packs (₹10,620.00). Carrier: from your supplier for patterns 1 and 2; for pattern 3, sixteen Lift Base 500 ml for 8,000 ml, and since CSI lists no larger base pack, ask on WhatsApp before a run that size and weigh 100 ml first to confirm your density. Materials exclude labour, freight, packaging and GST.

Valentine's Day is 14 February 2027. Florals are the natural gift scent, and a two-stage test plus a second-floral confirmation takes eight to ten weeks, so a test started in October or November is ready for a January production run. Message us your counts for stock and dispatch, with a GST invoice.
WhatsApp a stock check

What to buy for this test, and what to skip

Chosen on page statements, price and stock on 7 October 2026, not performance data; CSI publishes none for its bases or reeds. Each card says when not to buy.

1
ready-made base · arm C, positioned for florals
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
Lift is the CSI base whose page speaks to a floral that won't lift: "Best with floral, citrus, green, and fruity fragrance families", helping scents "bloom, diffuse further", with "rose, jasmine, orange, lemon" among its examples, and it says it "Performs beautifully in warm, humid Indian climates". That is the page's positioning, not a test result, and the text we captured gives no composition, density, flash point or SDS, so we can't tell you whether it contains IPM or anything else. Honest limitation: at ₹272.64 a bottle in liquid (worked), arm C is the dearest arm by ₹142.84 over your formula. It has to beat arms B and D, which use solvents you already own, to earn the money. The handle carries an old "ships-20th-july" note; it is in stock on 7 October 2026.
Size Price Unit price For this test
500 ml (only size) ₹1,099.00 ₹2.20 a ml arm C uses 240 ml; 260 ml left
2
fragrance oil · the worked floral, with stated diffuser use
Japanese Cherry Blossom Fragrance Oil
The worked floral: "sweet cherry and soft pink petals opening into a rose and jasmine heart, grounded by warm sandalwood and musk", with "10-30% for reed diffusers" on the page, so 20% and 25% are both inside its range. If your floral is another oil, keep yours in every arm. Honest pack maths: 100 gm and 500 gm are both ₹5.00 a gram, so the 500 gm costs ₹1,000.00 more than three 100 gm for 200 g you may not need yet; only the 1 kg is cheaper (₹4.84 a gram), which is a production decision, not a test one.
Size Price Per gram Bottles at 20 g Use
15 gm ₹104.00 ₹6.93 0 smell check only
50 gm ₹270.00 ₹5.40 2 two bottles
100 gm ₹500.00 ₹5.00 5 three cover stage 1 (240 g)
500 gm ₹2,500.00 ₹5.00 25 same per gram as 100 gm
1 kg ₹4,842.00 ₹4.84 50 cheapest per gram: production
Stage 1 oil: three 100 gm, ₹1,500.00; 60 g spare. Buy 100 gm — ₹500.00
3
fragrance oil · a second floral to confirm the carrier result
British Rose Fragrance Oil
Once a carrier passes with one floral, repeat the winning arm and your formula with a second floral before switching your range. British Rose is a lighter, greener rose: "fresh, dewy rose petals with subtle green undertones and a soft floral finish", with "reed diffusers (10-30%)" on its page. It is also one of the lower-priced florals per gram at CSI (₹3.07 at 1 kg), which matters if floral diffusers are a volume line. Skip it for stage 1: one oil at a time.
Size Price Per gram Bottles at 20 g Use
15 gm ₹94.40 ₹6.29 0 smell check only
50 gm ₹212.40 ₹4.25 2 confirmation arm
100 gm ₹342.20 ₹3.42 5 confirmation arm
500 gm ₹1,593.00 ₹3.19 25 after a pass
1 kg ₹3,068.00 ₹3.07 50 after a pass
For the confirmation round only. Buy 100 gm — ₹342.20
4
fibre reeds · identical in every arm
Fiber Diffuser Reeds (Black)
72 fresh reeds for stage 1 at 6 a bottle, from one pack; 36 more for stage 2 if you need it. Reeds that have sat in an IPM-rich liquid are not a fair start for a new arm, so don't reuse them. The page states 20.3 cm and no diameter; "Superior capillary action" and "no swelling, no clogging" are its claims. CSI sells fibre reeds, not rattan. Against our own interest: 50, 100 and 500 are all ₹8.00 a reed; the 500 saves nothing per reed.
Pack Price Per reed For this test
Pack of 25 ₹236.00 ₹9.44 stage 2 top-up
Pack of 50 ₹400.00 ₹8.00 too few for stage 1
Pack of 100 ₹800.00 ₹8.00 stage 1 needs 72, 28 spare
Pack of 500 ₹4,000.00 ₹8.00 no saving per reed
Stage 1 reeds: ₹800.00. Buy 100 — ₹800.00
5
bottles · same glass, neck and fill
Gold Reed Diffuser Bottle Pack of 10 (120 ML)
Twelve identical bottles for stage 1, with spares for stage 2. The page text says "Size: 50 and 100ml" although the variants are 50 ML and 120 ML, and states no neck size or cap material. Skip it if you already have twelve identical bottles of the size you sell.
Variant Price Each For this test
120 ML Pack of 10 ₹1,062.00 ₹106.20 each two packs for 12 bottles; 8 spare cover stage 2
50 ML Pack of 10 ₹826.00 ₹82.60 each not for this test
Two packs: ₹2,124.00. Buy 120 ML pack — ₹1,062.00

Skip for now: Softness Base as a second base arm (its page positions it for "soft florals, powdery musks, and light gourmand"; test it only if Lift fails and your floral is a soft, powdery one); Depth and Longevity, positioned for gourmand and woody families; the Room & Linen Spray Base (₹999.00), a spray base whose page says "Add 8-15%", not a reed base; the CSI HyperDiffusion Base™, out of stock on 7 October 2026; the Isopropyl Alcohol Spray, a cleaner, never a diffuser ingredient; and any oil above 100 gm before stage 1 is read.

The CSI principle
If the scent can't leave the reed, more scent in the bottle won't reach the room. Fix release, then judge the load.
Weigh first; four carriers at the same 20%; 25% only in a carrier that releases at the rate you need. CSI side: ₹4,023.00 with your own floral.
"A faint floral in an IPM blend is usually a carrier problem wearing a fragrance problem's clothes."
— CandleMakingSuppliesIndia
Why trust this guide

CandleMakingSuppliesIndia sells the base, oils, reeds and bottles named here. It does not sell IPM, DPG, DPM, Augeo-type solvents or perfumer's alcohol, and this page says so. Our base pages publish no composition, density, flash point or SDS in the text we captured, so Lift Base is one arm of your test, and the page tells you when cutting IPM in your own blend is the better buy.

Every CSI price was checked on 7 October 2026, with stock checked per variant; everything priced here is in stock on that date, and the CSI HyperDiffusion Base™ is out of stock and not offered. Page wording is quoted and attributed to the page.

IPM and DPG behaviour is general tendency, hedged, with no numeric viscosities, evaporation rates or flash points. The formula, 0.9 g a day, the band, the ₹600.00 and ₹300.00 a kg solvent placeholders, the arms, thresholds and 100-bottle run are labelled worked examples; nothing here is CSI test data. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.

Frequently asked questions

Why does my reed diffuser with IPM not smell strong?
IPM is an oily, very low-volatility ester that tends to slow evaporation, so the fragrance may not leave the reed tips fast enough. Weigh the bottle every 2–3 days; if it loses far less than your product life needs, the carrier is the bottleneck.
Should I add more fragrance oil to a weak reed diffuser?
Not first. Check release by weight, then test carriers at the same load. Raise the load only if a carrier that releases at the rate you need still smells faint, and test 20% against 25% in that carrier.
How much IPM is too much in a reed diffuser?
It depends on your oil and main carrier. Test your current amount against a reduced amount and none at the same fragrance load; if less IPM releases faster and smells stronger, you had too much.
What is the best base for floral reed diffusers?
No base is best for every floral. CSI's Lift Base page positions it for floral, citrus, green and fruity families, but that is the page's description; test it as one arm against your own carrier.
How many grams a day should a reed diffuser lose?
Set it from the life you sell. With about 90 g usable in a 100 g fill, 30 days needs about 3.00 g a day and 45 days about 2.00. Measure from day 7 onwards.
Does CSI sell IPM or DPG?
No. CSI sells ready-made reed diffuser bases such as Lift Base (₹1,099.00 for 500 ml), fibre reeds, bottles and fragrance oils. Buy IPM and DPG from your own supplier and read their SDS.
IPM + floral, faint room
Fix the carrier at the same load first; test more oil only where it can leave the reed.
The CSI side of stage 1 is ₹4,023.00: Lift Base, 100 Black fibre reeds and two Gold 120 ML packs, with your own floral. If cutting IPM in your blend wins, keep it.
Shop Lift Base Check test stock on WhatsApp
Editorial standards & sources
About this guide: part of CSI's cluster "Comparing DPM, IPM and Augeo-Type Solvents" (8321–8340). It owns the order of investigation for an IPM floral with poor throw: weigh first, test carriers (IPM as made, IPM cut, no IPM, a base arm) at the same load, then a gated load test in the winning carrier, with the cost of the wrong fix. IPM evaluation as an ingredient is 8325; IPM as the only carrier is 8327; raising load in DPG is 8305; the DPM-versus-IPM decision tree is 8335.

Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — British Rose Fragrance Oil, Lavender Fragrance Oil, Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Orchard Pear, Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g). They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Judy Roy, Tina Raha, Ranjita RAO, Sooraj R, Thenirvaofficial. The reviews from Ashwini are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.

Figures verified 7 October 2026, CSI live pricing: Lift Base 500 ml ₹1,099.00 (₹2.20 a ml); Japanese Cherry Blossom Fragrance Oil 15 gm ₹104.00 (₹6.93 a gram), 50 gm ₹270.00 (₹5.40), 100 gm ₹500.00 (₹5.00), 500 gm ₹2,500.00 (₹5.00), 1 kg ₹4,842.00 (₹4.84); British Rose Fragrance Oil 15 gm ₹94.40, 50 gm ₹212.40, 100 gm ₹342.20 (₹3.42 a gram), 500 gm ₹1,593.00 (₹3.19), 1 kg ₹3,068.00 (₹3.07); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed from 50 up); Gold Reed Diffuser Bottle Pack of 10, 120 ML ₹1,062.00 (₹106.20 each), 50 ML ₹826.00 (₹82.60 each); Room & Linen Spray Base ₹999.00; CSI HyperDiffusion Base™ ₹1,499.00 (out of stock). Per unit = pack price ÷ units, two decimals. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol.

Non-price figures: the title gives no figures, so the 20 g + 30 g + 50 g formula, 0.9 g a day, the 90 g usable band, arms, thresholds and 100-bottle run are labelled worked examples. The ₹600.00 and ₹300.00 a kg prices are placeholders, not CSI or market prices. Base cost per bottle treats 80 ml as 80 g only if your weighed density is near 1.0 g/ml. IPM and DPG behaviour is general tendency; no numeric viscosities, flash points or evaporation rates are quoted. "Best with floral, citrus, green, and fruity fragrance families", "bloom, diffuse further", "10-30% for reed diffusers", "reed diffusers (10-30%)" and "Add 8-15%" are page wording. Costs exclude labour, freight, packaging and GST. Valentine's Day 14 February 2027 is a calendar fact.
ब्लॉग पर वापस जाएं