I Used the Same Reed Diffuser Base with Jasmine and Oud, but Only the Oud Formula Produced Sediment — How Do I Investigate Fragrance Compatibility?
शेयर करना
What is the first test? Look at the deposit first (magnifier, a warm-water sample, swirl and wait). Then run four sealed arms, three bottles each, 100 g batches by weight: oud at 20% in your base (repeat), oud at 15% in your base, oud at 20% in a base positioned for woody oils, and jasmine at 20% in your base as the control.
Can I just filter it? As a diagnosis, yes; as a fix, no. If the deposit re-forms after filtering, the formula is unstable. Filtering may also remove fragrance material.
What does CSI have for this? Longevity Base ₹1,296.00, whose page positions it for "oriental, woody, resinous, and balsamic" oils, as arm C; Woody Oud from ₹93.22; Gold 120 ML bottles ₹1,062.00 a pack. CSI does not sell DPG, DPM, IPM or Augeo-type solvents, and the Longevity page's positioning is a reason to test it, not a result.
- Straight answer: how to investigate the oud
- Your two formulas, and what the clear jasmine proves
- Look at the deposit before you test anything
- The cause table
- The compatibility screen: four arms, twelve bottles
- The filter test and the lot check
- The CSI route, the record and the purchase step
- Frequently asked questions
Your two formulas, and what the clear jasmine proves
Your situation, restated: the same reed diffuser base, two fragrances, jasmine and oud, made the same way. The jasmine stayed clear. The oud formed a deposit at the bottom of the bottle. The title gives no percentages, so the series default applies, labelled as a worked example: 20 g oil + 80 g base by weight for each, about 100 g in a 120 ML Gold bottle. Your base might be a DPG, DPM or IPM blend, an Augeo-type solvent blend (Augeo is a Solvay trademark), or a ready-made base. Where this page names oils, it uses CSI's Woody Oud and Jasmine as examples; if yours came from elsewhere, the method is the same.
The jasmine bottle is evidence. It tells you that your scale, your mixing and your bottles can produce a stable diffuser in this base, and that the base isn't separating on its own. It doesn't tell you the base suits every oil. Jasmine-type florals and oud-type woods are built from quite different materials, and a carrier that holds one well may not hold the other. The CSI pages make the same point in their own way: our Lift and Softness pages position those bases for florals, the Longevity page for "oriental, woody, resinous, and balsamic" families. That is product positioning, not proof. But it tells you the oud deserves its own test rather than inheriting the jasmine's pass.
This page is about sediment: a deposit of particles or gum that settles. If your oud was hazy rather than sedimented, and clear in DPM but hazy in a ready-made base, that is 8332. If it separated into two liquid layers overnight, the screen is 8362. If an oud formula that used to be clear changed when a new oud lot arrived, start at 8369.
Look at the deposit before you test anything
Five minutes with the bottle you already have narrows the investigation. You are trying to tell four things apart: a component coming out of solution (crystals or fine particles), a heavy material the base won't hold (gummy, often brownish flakes), separation (droplets, which is a different problem), and debris (fibres, grit, specks that have nothing to do with the fragrance).
| Check | How | If you see | It suggests |
|---|---|---|---|
| Magnifier or phone macro | Tip the bottle gently, let the deposit settle, look through the glass against a dark card and then a white one | Fine needles or glittering crystals | A solid component coming out of solution (some aroma materials are solids dissolved in the oil) |
| Soft, gummy or sticky flakes, often brownish | Resinous or heavy material that the base doesn't hold | ||
| Round droplets rather than particles | Separation, not sediment: see 8362 | ||
| Fibres, grit or dark specks | Debris: bottle, beaker, reeds or dust | ||
| Gentle warm-water check | Pour a 20 g sample into a small sealed glass container and stand it in a bowl of hand-warm tap water for 30 minutes. No flame, no stove, no microwave | Deposit redissolves, returns after a night in a cool place | Temperature-dependent solubility: a borderline formula |
| Deposit does not change | Material that this base doesn't dissolve at any room temperature; or debris | ||
| Swirl and wait | Swirl the bottle, then check at 1 hour and 24 hours | Settles again within hours | Real particles; denser than the liquid |
| Stays suspended as a haze | Finer particles or a haze problem: 8332 covers oud haze in a ready-made base |
Keep the warm-water check gentle: hand-warm tap water, a sealed small glass container, no flame, no stove, no microwave. Diffuser liquids can be flammable, and heat is only a diagnostic here. If warmth clears the deposit and a cool night brings it back, your formula is borderline at room temperature, and an Indian winter night or an air-conditioned bedroom will show it to your customer. Treat "clears when warm" as a fail.
The cause table
Eight causes can leave sediment with one oil and not another in the same base. They fall into five groups: the carrier (solvent choice), the fragrance (load, oil character, lot), reeds/bottle/fill, the room, and process or measurement. The screen below tests the first three groups at once. The free checks above and good bench habits deal with the rest.
| Cause | What you'd see | Discriminating check | Fix |
|---|---|---|---|
| Solvent choice: your base dissolves jasmine-type materials well but not some of oud's heavier, resinous or woody components | Deposit in oud bottles at 20% and 15%; jasmine clear | Arm C: Woody Oud at 20% in Longevity Base stays clear | Use a different base for woody and resinous oils; keep yours for florals |
| Fragrance load: 20% oud is above what your base holds; 15% might not be | Deposit at 20% only | Arm B: 15% in your base stays clear | Lower the oud load in this base (then weight-test throw) |
| Oil character: a component that comes out of solution in many carriers | Deposit in every base and at every load; warm water may redissolve it | Arms A, B and C all deposit; D clear | Choose a different oud for diffusers; ask the supplier which of their ouds suit diffusers |
| Oil lot: this bottle of oud differs from the lot that worked before | A formula that was clear with an earlier oud lot now deposits | Old lot vs new lot in the same base, same day (if you kept any) | Ask the supplier for lot details; see 8369 |
| Reeds, bottle, fill: debris or water in the oud bottles only | Specks or fibres, not crystals or gum; only in some bottles | A plain-base bottle filled the same way; the filter test (deposit doesn't re-form) | Clean, fully dry bottles; dust-free filling |
| Room: the oud bottles stood somewhere cooler | Deposit after cool nights, redissolves when warmed | Warm-water check; all arms on one shelf | Test at a cool spot too; a pass must hold there |
| Process: oud residue in a shared beaker, or under-mixing a thicker oil | Streaks at the bottom, or deposit in the first bottle filled | Separate beaker per oil; mix each 100 g batch two minutes; fill in a recorded order | One vessel per oil; mix by time, not by look |
| Measurement: the real oud load was higher than written | Oud is often thicker and clings to the beaker; poured by volume, the % drifts | Re-weigh a fresh batch: 20 g oil, 80 g base, by weight | Weigh into the base, not into a cup first |
The jasmine control has already made some rows less likely: a base that separates on its own, a scale that is badly off, or a dirty process across the board. "Less likely" is not "ruled out", though, because the jasmine and oud may have been mixed on different days, in different beakers, from bottles of different ages. That is why the control is repeated in the screen rather than taken from memory.
The compatibility screen: four arms, twelve bottles
| Arm | Per bottle | Bottles | Question it answers |
|---|---|---|---|
| A · the failure, repeated | 20 g Woody Oud + 80 g your base | 3 | Does the deposit come back under clean conditions? |
| B · lower load | 15 g Woody Oud + 85 g your base | 3 | Is 20% simply too much oud for this base? |
| C · other base | 20 g Woody Oud + 80 g Longevity Base | 3 | Can a base positioned for woody oils carry it at 20%? |
| D · control | 20 g Jasmine + 80 g your base | 3 | Are your process and base still producing a clean bottle? |
| E · optional | 20 g Woody Oud + 80 g Pure Performance | 3 | Is it Longevity specifically, or any second base? |
Arm A matters even though you've "already seen it": a fresh, carefully made repeat tells you whether the original failure was the formula or something about that one batch. Arm D is there in case the problem isn't the oud at all. If the jasmine deposits this time, look at your beakers, bottles and water before you look at any oil. Keep the arms on one shelf, so room conditions are shared, until 72 hours, then move one bottle from each arm to a cooler spot.
The money in this screen is mostly oud. At ₹4.53 a gram, a 100 g bottle at 20% carries ₹90.60 of Woody Oud, against ₹78.40 of Jasmine at its 500 gm rate. At 15% the oud is ₹67.95, a 25.0% cut in oil. That is worth having only if the 15% bottle still smells like the product you want to sell.
The filter test and the lot check
The filter test: a diagnosis, never a fix
Filtering separates a one-off deposit from an ongoing one. Pass 20 g of the sedimented liquid once through a fresh paper coffee filter into a clean, dry glass container, cap it, and watch it for seven days beside an unfiltered 20 g. If the deposit re-forms in the filtered sample, material is still coming out of solution: the formula is unstable and filtering fixed nothing. If it doesn't re-form, the deposit may have been debris or a small amount of material that came out once, so check your bottles, beakers and oil lot.
The hedges matter. Filter paper can hold back or absorb some fragrance material, so a filtered liquid may smell different from the formula you designed, and paper can shed fibres. It is a home diagnosis, not a laboratory method. Do it with gloves, in a ventilated room, away from any flame, and throw away the used paper safely. Never sell a filtered batch as a fix. If filtering is the only thing that makes a formula look right, the formula needs to change.
The lot check
Fragrance oils are made in lots, and lots can differ. Find the lot or batch number for your oud (bottle label or invoice) and ask your supplier for the lot details and documentation. For CSI oils, ask on WhatsApp, where the MSDS and IFRA documentation are also available on request. If you kept any of an earlier oud lot that worked in this base, run it beside the new one: same base, same 20%, three bottles each. If only the new lot deposits, the lot is your cause. That situation, and how to set up an incoming check for every new lot, belongs to 8369.
The CSI route, the record and the purchase step
To be plain about what we sell: CSI does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol, and the Isopropyl Alcohol Spray we list is a jar cleaner, never a diffuser ingredient. Our reed diffuser bases say "Blend with 10-30% fragrance oil" and to rest the blend 24–48 hours before bottling. In the text we captured they publish no composition, density, flash point, SDS or IFRA data. The Longevity Base is in this screen because its page positions it for woody and resinous oils, and our Depth Base page sends oud and resins to it. Both are descriptions to test. For SDS and technical data, ask on WhatsApp.
Keep a compatibility record
The best result of this investigation is a record you can reuse, not a single passing bottle. One line per combination: oil, supplier, lot; base and lot; load by weight; date mixed; result at 24 h, 72 h, day 7 and day 14 (clean / haze / specks / crystals / gum / layer); g/day to day 30; sniff score; decision. After a few oils a pattern usually appears, for example that florals hold in one base and woods need another. The live guide on one base or several for a five-fragrance range covers the buying decision that follows. Record-keeping for multi-solvent trials is set out in 8356.
The purchase step
Only after a combination passes. If it is Woody Oud at 20% in the Longevity Base, the liquid in a 100 g bottle costs about ₹297.96: ₹90.60 of oud plus ₹207.36 of base at a labelled 1.00 g/ml (weigh 100 ml of the base yourself). That is materials only, excluding labour, freight, packaging and GST. For a 20-bottle run you need 400 g of oud: four 100 gm packs or the 500 gm cost the same per gram, so buy whichever leaves the stock you want. The base is four 500 ml bottles at 80 g per bottle and a labelled 1.00 g/ml, ₹5,184.00. Keep jasmine in the base that holds it. Two bases for two families is a normal outcome, not a failure.
What to buy for the screen, and what to skip
Chosen on page statements, price and stock on 7 October 2026, not on performance. CSI publishes no compatibility or diffusion data, and nor do we.
| Size | Price | Per gram | 100 g bottles at 20% | Use |
|---|---|---|---|---|
| 15 gm | ₹93.22 | ₹6.21 | 0 | top-up only |
| 50 gm | ₹271.40 | ₹5.43 | 2 | one arm needs 60 g |
| 100 gm | ₹453.12 | ₹4.53 | 5 | two packs cover the 165 g oud arms |
| 500 gm | ₹2,265.60 | ₹4.53 | 25 | same per gram as 100 gm |
| 1 kg | ₹4,531.20 | ₹4.53 | 50 | same per gram as 100 gm |
| Size | Price | Per gram | 100 g bottles at 20% | Use |
|---|---|---|---|---|
| 15 gm | ₹103.00 | ₹6.87 | 0 | with 50 gm = 65 g control |
| 50 gm | ₹230.00 | ₹4.60 | 2 | with 15 gm = 65 g control |
| 100 gm | ₹430.00 | ₹4.30 | 5 | control arm plus spare |
| 500 gm | ₹1,961.00 | ₹3.92 | 25 | production |
| 1 kg | ₹3,923.00 | ₹3.92 | 50 | same per gram as 500 gm |
| Size | Price | Unit price | Use |
|---|---|---|---|
| 500 ml | ₹1,296.00 | ₹2.59 a ml | arm C (240 g) with about 260 ml spare for a repeat |
| Size | Price | Unit price | Use |
|---|---|---|---|
| 100g | ₹325.00 | ₹3.25 a gram | single-bottle check only |
| 500 ML | ₹1,099.00 | ₹2.20 a ml | optional neutral arm E |
| Pack | Price | Per bottle | Use |
|---|---|---|---|
| 120 ML Pack of 10 | ₹1,062.00 | ₹106.20 | 12 bottles = two packs (₹2,124.00), 8 spare |
| 50 ML Pack of 10 | ₹826.00 | ₹82.60 | sealed retains of the passing formula |
| Size | Price | — | Use |
|---|---|---|---|
| 100 ML | ₹300.00 | — | warm-water check and filter-test samples |
| 250 ML | ₹600.00 | — | mixing each 100 g batch |
Skip for now: 500 gm or 1 kg of either oil, a 500-reed pack, and the CSI HyperDiffusion Base (out of stock on 7 October 2026). The 60 reeds for stage 2 are a pack of 50 plus a pack of 25 (₹636.00, 15 spare); above 50 the price per reed is flat. Safety, plainly: fragrance oils and diffuser carriers can irritate skin and eyes, and flammability depends on the full formula. Wear gloves when sampling and filtering, keep everything away from flames, heat, children and pets, and take hazard and labelling information from each raw material's SDS. We give no legal advice.
CandleMakingSuppliesIndia sells ready-made reed diffuser bases, fibre reeds, bottles and fragrance oils, including the Woody Oud and Jasmine used as examples here, but not DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol. This page still tells you that the Woody Oud page states no diffuser percentage, that our dearest base may not be the one you need, and that a lower load in your own base may be the whole answer.
Every price was checked on the live store on 7 October 2026, with stock checked per size: the CSI HyperDiffusion Base is out of stock and is not offered; every other item priced on this page is in stock on that date. Page wording is quoted and attributed.
The 20% formula, the 15% arm, the checks, the filter test and the compatibility rule are worked examples and judgement, labelled as such. For lot details, bulk pricing, GST invoicing, and MSDS and IFRA documentation for our oils on request, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Mixed 20 g Fragrance Oil with 80 g Reed Diffuser Base, but the Liquid Turned Milky Immediately — How Do I Determine Whether Mixing Order or Solubility Is Responsible?
- My Reed Diffuser Formula Looks Clear Immediately After Mixing but Develops Two Layers Overnight — Should I Change the Base Before Making a Larger Batch?
- I Made a 100 g Reed Diffuser Trial That Stayed Clear for Two Days but Became Cloudy After a Week — How Long Should I Test Stability Before Selling?
- I Made a Reed Diffuser with 25% Fragrance Oil, and the Reeds Became Sticky Within Ten Days — Should I Test a Lower Load or a Different Base?
- My Reed Diffuser Liquid Is Clear in the Mixing Beaker but Turns Cloudy After Filling the Glass Bottle — Could Container Residue or Temperature Be Responsible?
- I Used a Different Fragrance Oil Lot in My Existing Reed Diffuser Formula, and It Turned Cloudy — Should I Repeat Compatibility Testing?
- My Reed Diffuser Base Has Developed an Unusual Odour During Storage — How Do I Decide Whether the Raw Material Is Still Suitable for Manufacturing?
- How Do I Build a Reed Diffuser Batch-Testing Checklist Covering Mixing, Clarity, Separation, Wicking, Evaporation, Fragrance Throw, Packaging and Storage Stability?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Dark Vanilla Oud, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Jasmine Fragrance Oil, Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Woody Oud Fragrance Oil. They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Renam Dhoundiyal, Payal Patel, snehal Chaudhary, Sooraj R. The reviews from S.A., SUMAN BISHT are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.
Figures verified 7 October 2026, CSI live pricing: Woody Oud Fragrance Oil 15 gm ₹93.22 (₹6.21 a gram), 50 gm ₹271.40 (₹5.43 a gram), 100 gm ₹453.12, 500 gm ₹2,265.60, 1 kg ₹4,531.20 (₹4.53 a gram at all three); Jasmine Fragrance Oil 15 gm ₹103.00, 50 gm ₹230.00, 100 gm ₹430.00, 500 gm ₹1,961.00, 1 kg ₹3,923.00 (₹3.92 a gram at 500 gm and 1 kg); Longevity Base 500 ml ₹1,296.00 (₹2.59 a ml); Pure Performance Reed Base Oil 100g ₹325.00, 500 ML ₹1,099.00 (₹2.20 a ml); CSI HyperDiffusion Base ₹1,499.00 (out of stock); Gold Reed Diffuser Bottle 50 ML pack of 10 ₹826.00 (₹82.60 each), 120 ML pack of 10 ₹1,062.00 (₹106.20 each); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00 (₹8.00 a reed); Silicon Measuring Beaker 100 ML ₹300.00, 250 ML ₹600.00. Per unit = price ÷ units, grams or ml, two decimals.
Non-price figures: the title gives no percentages; the 20 g + 80 g formula, the 15% arm, three bottles per arm, five reeds, 72 hours, day 14 and day 30 are labelled worked examples and judgement; 1.00 g/ml is a labelled worked density (CSI base pages state no density). The reading key and the filter test are diagnostic logic, not laboratory methods or CSI test data. Costs are materials only and exclude labour, freight, packaging and GST.