I Want to Buy Fibre Reeds for Summer Reed Diffuser Manufacturing — How Do I Compare Different Reed Diameters and Quantities for Evaporation Control?
शेयर करना
I Want to Buy Fibre Reeds for Summer Reed Diffuser Manufacturing — How Do I Compare Different Reed Diameters and Quantities for Evaporation Control?
So how many reed types am I actually choosing between? One. Fibre reeds in black and white, same stated length, same stated pore description, four identical pack rungs. The difference you can prove is ₹1.16 a reed at the 25-pack and ₹1.00 a reed above it. No rattan reed is listed at all.
Then what replaces the diameter spec? A soak-and-weigh. Weigh ten dry reeds, stand them in your base for a fixed time, lift them, let them drip for a fixed count, weigh them again. Grams gained ÷ reed count is a real number about the reed you can actually buy, measured in the base you actually use. It is the figure a diameter would only have been a proxy for.
And the quantity half? That is your control. CSI's reed pages state 6–8 reeds for a 50–100 ml bottle and say "use 10+ for maximum throw in larger rooms — the base will evaporate faster at higher reed counts". At the black-reed rate of ₹8.00 each, the span from six reeds to twelve is ₹48.00 to ₹96.00 a bottle. Buy the Pack of 50 at minimum: it is where the per-reed price stops falling.
That is less limiting than it sounds, because diameter was only ever a proxy for the thing you care about — how much liquid a reed holds and carries. You can measure that directly. Weigh ten dry reeds on a ₹354 scale, stand them in the base you actually use for a soak time you write down, lift them, let them drip for a fixed count, weigh them again, and divide: grams gained ÷ 10 = grams per reed. Do it for both colours under identical rules and you have the only comparison between them that is not a price. Then set the count, which is the lever that genuinely exists: at the black-reed rate of ₹8.00 each, six reeds is ₹48.00 a bottle and twelve is ₹96.00, and CSI's own reed page says plainly that "the base will evaporate faster at higher reed counts". Buy at the Pack of 50 (₹400) or above — that is where the per-reed price stops falling and the Pack of 500 adds nothing but fewer orders.
There is no diameter to compare — one reed, two colours
Start with what the two reed pages actually say, because the gap between what a maker expects to find there and what is printed there is the whole of this problem. Both listings describe the same object. They state a length of 20.3 cm. They describe the material as having a "uniform pore structure — no swelling, no clogging, no splitting". They claim "consistent diffusion from day 1 to day 30". They give a usage band — 6–8 reeds for a 50–100 ml bottle — and a second sentence that is unusually useful: "use 10+ for maximum throw in larger rooms — the base will evaporate faster at higher reed counts". They also carry the one piece of environmental guidance CSI publishes anywhere in the range: "avoid placing in direct sunlight or near heat sources which accelerate evaporation".
What they do not state is the number you came looking for. There is no diameter in millimetres. There is no pore size. There is no fibre count, no density, no stated uptake, no evaporation rate and no product life. That absence is not a gap in this guide — it is the specification. And because the catalogue holds one fibre reed in two colours and no rattan reed at all, there is no second diameter sitting on an adjacent page to compare the first one against even if one were printed.
| What the pages state | What it is | What you can use it for | What it cannot tell you |
|---|---|---|---|
| 20.3 cm length | A dimension, verifiable with a ruler | Checking the reed clears your bottle neck with enough exposed length to matter | Nothing about how much liquid the reed carries |
| "Uniform pore structure — no swelling, no clogging, no splitting" | A description of the material's behaviour, in words | Setting the expectation that reeds should not deform or block during a run — and a reason to inspect them at every checkpoint | A pore size, a diameter or a comparison against any other reed |
| "Consistent diffusion from day 1 to day 30" | A claim about steadiness, not a quantity | Nothing on its own — but it is the claim your own 30-day weighed log tests | How much is diffused, into what room, at what temperature |
| 6–8 reeds for a 50–100 ml bottle | A usage band, published by CSI | A defensible starting count for a 50 ml bottle | A count for the 120 ml bottle the same range sells — that size sits outside the band |
| "The base will evaporate faster at higher reed counts" | A directional statement, qualitative | Confirming which way the count lever points before you spend anything | How much faster — no rate, multiplier or percentage is published |
| "Avoid direct sunlight or near heat sources which accelerate evaporation" | Placement guidance, qualitative | Wording for your customer insert, in CSI's own words | Any figure for how much heat or sun costs you |
| Price: ₹236 / ₹400 / ₹800 / ₹4,000 black, ₹265 / ₹450 / ₹900 / ₹4,500 white | The only quantified difference between the two listings | Costing a reed count, a trial and a production run exactly | Whether the two colours behave differently in liquid — nothing published says they do or do not |
There is one page-copy contradiction in the range worth knowing about before you plan a purchase, and it is not on the reed pages. The Pure Performance Base page refers twice to "rattan reed sticks" — a reed type CSI does not list. That is page copy, not a product, and it is named here once so that you do not go looking for a rattan listing and conclude you have missed it. If you specifically want to trial rattan against fibre, that is a sourcing conversation rather than a basket: message us and we will tell you plainly what is and is not available.
Soak-and-weigh: the measurement that replaces the missing spec
A reed diameter, if it were printed, would be useful to you for exactly one reason: thicker fibre holds and moves more liquid, and the liquid that reaches the exposed length above the neck is what leaves into the room. So measure that directly. A soak-and-weigh gives you grams gained per reed — the mass of your own base that one reed takes up under rules you set — and unlike a diameter it already includes the base you actually use, which a catalogue figure never could.
The whole method is a scale, a beaker and ten minutes. It is not a performance test and it does not predict anything about product life; it is a characterisation of the reed, in the same spirit as weighing a jar before you fill it. Its value is that it turns an unavailable specification into a number in your own batch record, which means that when you change reed supplier, colour or pack, you can detect the change instead of arguing about it.
| Line | What goes in it | Whose number it is | Why it has to be written down |
|---|---|---|---|
| Reed listing and colour | Black or White, with the pack rung you took them from | CSI listing | Two listings, four rungs each — the record has to say which object you measured |
| D — ten dry reeds, grams | Your scale reading | Yours | The baseline every later figure is a difference from |
| Base used | The base, the pack, the date you opened it | CSI listing | Uptake is a property of the reed-and-base pair, not of the reed |
| Immersion depth | How far up the reed the liquid came | Yours | Changes the result more than anything except drip time |
| Soak time | The duration you chose | Yours | Arbitrary and therefore must be constant across every comparison |
| Drip count | The count you held the bundle for before weighing | Yours | The single largest source of scatter in this measurement |
| W — ten wet reeds, grams | Your scale reading | Yours | The other half of the subtraction |
| (W − D) ÷ 10 | Grams gained per reed | Yours, computed | The figure that stands in for the diameter nobody publishes |
| × your reed count | Grams of base committed to the bundle | Yours, computed | Explains part of what your day-0 to day-1 weighing shows |
| Room temperature and airflow | Thermometer reading, fan or AC on or off | Yours | Every condition in this series is the reader's own and has to be labelled as such |
Quantity is the lever that exists
Here is the part of your question that is fully answerable, cheap and reversible. Reed count sets how much reed surface is exposed above the bottle neck, and that surface is where both halves of your product live: fragrance reaches the room from it and liquid leaves from it. CSI's own reed page says which way the lever points — "the base will evaporate faster at higher reed counts" — and prices every step of it at ₹8.00 for black and ₹9.00 for white once you are at the Pack of 50 or above.
The published band is 6–8 reeds for a 50–100 ml bottle, and it is worth noticing exactly what that band does and does not cover, because the same range sells a 120 ml bottle. A Gold Reed Diffuser Bottle comes in 50 ML and 120 ML variants only. The 50 ML sits inside the published band. The 120 ML sits above it — there is no published count for a 120 ml reed bottle anywhere in the range, which means that if you are making 120 ml diffusers your reed count is your own decision and your own test, not a specification you can cite.
| Reeds in the bottle | Black at ₹8.00 | White at ₹9.00 | Colour premium | Against the published 6–8 band |
|---|---|---|---|---|
| 4 | ₹32.00 | ₹36.00 | ₹4.00 | Below the band — your own decision |
| 5 | ₹40.00 | ₹45.00 | ₹5.00 | Below the band |
| 6 | ₹48.00 | ₹54.00 | ₹6.00 | Bottom of the published band for a 50–100 ml bottle |
| 7 | ₹56.00 | ₹63.00 | ₹7.00 | Inside the band |
| 8 | ₹64.00 | ₹72.00 | ₹8.00 | Top of the published band |
| 10 | ₹80.00 | ₹90.00 | ₹10.00 | Above the band — the page's own "10+ for maximum throw in larger rooms" |
| 12 | ₹96.00 | ₹108.00 | ₹12.00 | Above the band, no published guidance at all |
Two things follow from that table that are worth holding on to. First, the whole decision is small money per bottle and large money per run. Going from eight reeds to six saves ₹16.00 a bottle in black; across a 240-bottle run — which happens to be the current stock ceiling at the 120 ML bottle variant, 24 packs of ten — that is ₹3,840. Second, the colour premium is trivial per bottle and real per run: ₹8.00 a bottle at eight reeds, ₹1,920 across those same 240 bottles. Neither of those is a reason to choose a reed on its own. Both are reasons to make the decision once, deliberately, and write it into the specification rather than letting the warehouse pick whichever box is open.
What the count cannot do is be set from a table. Which count is right for your bottle, your base, your oil and the rooms your customers live in is a measurement, and the measurement is weight: weigh the filled bottle with its reeds in and its cap off on day 0 and at fixed checkpoints, record grams lost per day beside a fragrance-intensity note, the room's temperature and whether a fan or an air-conditioner was running. That log is the only evidence that exists about your product. If you want the full version of that comparison, the reduce-the-reed-count post works through it from the other end, and the throw-against-longevity post sets out why a count is a trade and not an optimum.
What a reed-count trial actually consumes
If the count is the lever, the question becomes how much a trial of the count costs to buy — and the answer is reassuring, because the reeds are the cheapest thing in it. A reed-count trial is five counts, built in identical bottles, with everything except the count frozen. The reed arithmetic lines up with the pack rungs almost exactly, which makes the purchase decision unusually clean.
Five counts of 4, 6, 8, 10 and 12 reeds consume 4 + 6 + 8 + 10 + 12 = 40 reeds for one bottle each. Add ten reeds for the soak-and-weigh and you need 50 — one Pack of 50 at ₹400, exactly. Two replicates of each count is 80 reeds plus the soak sample, which is 90 — one Pack of 100 at ₹800, with ten spare. Three replicates is 130, which is a Pack of 100 plus a Pack of 50 at ₹1,200 for 150 reeds. Beyond that you are buying a Pack of 500 at ₹4,000, which costs the same ₹8.00 a reed and exists to save you order lines rather than money.
| Trial design | Bottles, including one cool-stored control | Reeds needed and pack bought | Glass, base and oil in whole packs | Total · reed share |
|---|---|---|---|---|
| One bottle per count (4, 6, 8, 10, 12) | 6 | 40 + 10 for the soak = 50 · Pack of 50 ₹400 | 1 bottle pack ₹1,062 · 2 base packs ₹2,198 · 2 × 100 gm Citrus Lemon ₹600 | ₹4,260 · reeds 9.4% |
| Two bottles per count | 11 | 80 + 10 = 90 · Pack of 100 ₹800 | 2 bottle packs ₹2,124 · 2 base packs ₹2,198 · 4 × 100 gm ₹1,200 | ₹6,322 · reeds 12.7% |
| Three bottles per count | 16 | 120 + 10 = 130 · Pack of 100 + Pack of 50 ₹1,200 | 2 bottle packs ₹2,124 · 3 base packs ₹3,297 · 1 × 500 gm ₹1,420 | ₹8,041 · reeds 14.9% |
| White reeds instead of black, two per count | 11 | 90 · Pack of 100 ₹900 | Unchanged at ₹5,522 | ₹6,422 · ₹100 more |
| The soak-and-weigh on its own | 0 | 10 of each colour, from Packs of 50 ₹850 | Scale ₹354 · beaker ₹300 · base you already have | ₹1,504 · and the reeds survive |
The number to take away from that table is the reed share. In a trial about reeds, the reeds are a tenth of the bill. Glass and base are the expensive parts, which has a practical consequence: if you are going to run a reed-count trial at all, run it at two replicates rather than one, because the second bottle at each count costs you ₹8.00 to ₹24.00 of reeds and buys you the only thing that makes a five-point comparison readable — an idea of how much two supposedly identical bottles differ from each other. A one-bottle-per-count trial produces five numbers and no way to tell a real difference from ordinary spread.
Black or white: ₹1.16, ₹1.00 and nothing else
The two listings have identical pack structures and identical published descriptions, so the ladder below is the complete numerical comparison available between them. Read it for two things: the colour gap, and the shape of the volume reward — which is unusual, because it happens once and then stops.
| Pack | Black | Per reed | White | Per reed | Gap per reed |
|---|---|---|---|---|---|
| Pack of 25 | ₹236 | ₹9.44 | ₹265 | ₹10.60 | ₹1.16 |
| Pack of 50 | ₹400 | ₹8.00 | ₹450 | ₹9.00 | ₹1.00 |
| Pack of 100 | ₹800 | ₹8.00 | ₹900 | ₹9.00 | ₹1.00 |
| Pack of 500 | ₹4,000 | ₹8.00 | ₹4,500 | ₹9.00 | ₹1.00 |
| Fall from the 25-pack to the 50-pack | −₹1.44 a reed | −15.25% | −₹1.60 a reed | −15.09% | The only volume reward in the range |
| Fall from the 50-pack to the 500-pack | ₹0 | 0% | ₹0 | 0% | Fewer order lines, not cheaper reeds |
So the purchasing rule is short. Never buy the Pack of 25 for production — it exists for a trial, and it costs you 18% more per reed than the next rung up. Buy the Pack of 50 as your floor. Move to the 100 or the 500 only when the number of bottles you are building makes the order line worth consolidating, because the per-reed price is identical across all three. At eight reeds a bottle, a Pack of 500 is 62 bottles' worth of black reeds for ₹4,000, and 50 bottles' worth if you ship two spares in the box.
On the colour itself: nothing published distinguishes black from white except price and appearance. Both pages give the same 20.3 cm, the same pore description, the same day-1-to-day-30 claim and the same reed-count guidance. CSI has not published an uptake figure for either, and this page will not invent one. If the colour matters to your product — and in a gold-necked bottle it visibly does — then choose on appearance, cost it at ₹1.00 a reed, and if you want to know whether the two differ in liquid at all, that is what the soak-and-weigh is for. It is the one comparison you can make that nobody has to take on trust.
What to buy, and in which pack
Four lines cover the whole of this. Two reed listings, because that is the entire reed range; the bottle, because the reed count question is meaningless without the vessel it sits in; and the scale, because without it the soak-and-weigh is an opinion. Everything is priced at the rung you would actually buy for a trial, with the production rung beside it.
| Pack | Price | Per reed | Bottles at 8 reeds |
|---|---|---|---|
| Pack of 25 | ₹236 | ₹9.44 | 3, with 1 spare |
| Pack of 50 | ₹400 | ₹8.00 | 6, with 2 spares |
| Pack of 100 | ₹800 | ₹8.00 | 12, with 4 spares |
| Pack of 500 | ₹4,000 | ₹8.00 | 62, with 4 spares |
| Pack | Price | Per reed | Premium over black |
|---|---|---|---|
| Pack of 25 | ₹265 | ₹10.60 | ₹1.16 a reed |
| Pack of 50 | ₹450 | ₹9.00 | ₹1.00 a reed |
| Pack of 100 | ₹900 | ₹9.00 | ₹1.00 a reed |
| Pack of 500 | ₹4,500 | ₹9.00 | ₹1.00 a reed |
| Variant | Price | Per bottle | Published reed band |
|---|---|---|---|
| 50 ML Pack of 10 | ₹826 | ₹82.60 | Inside the 6–8 band |
| 120 ML Pack of 10 | ₹1,062 | ₹106.20 | Above the band — no published count |
| Item | Price | What it does here |
|---|---|---|
| Candle Making Weighing Scale | ₹354 | D and W in the soak-and-weigh; every checkpoint weighing after |
| Silicon Measuring Beaker 100 ML | ₹300 | Holds the soak at a repeatable immersion depth |
| Silicon Measuring Beaker 250 ML | ₹600 | Mixing trial batches of base and oil |
| CSI Pro Mixer | ₹349 | Blending before the published 24–48 hour rest |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials, not finished diffusers. The commercially convenient answer to your question would have been a table of reed diameters with a recommendation attached. That table does not exist, because no reed diameter, pore size, fibre count, uptake figure or evaporation rate is published for either fibre reed in the range — and inventing one would make your specification worse, not better. What is published is quoted here word for word; what is not published is named as missing. The soak-and-weigh in the middle of this page costs ₹354 and ten reeds and gives you a figure that is yours, repeatable on the next delivery, and measured in your own base.
Stated specifications are quoted only where a page publishes them: both fibre reed pages state 20.3 cm length, "uniform pore structure — no swelling, no clogging, no splitting", "consistent diffusion from day 1 to day 30", 6–8 reeds for a 50–100 ml bottle, "use 10+ for maximum throw in larger rooms — the base will evaporate faster at higher reed counts", and "avoid placing in direct sunlight or near heat sources which accelerate evaporation". Those last two sentences are CSI's own wording about reeds and placement; neither is a rate and neither is a coverage figure, and no coverage figure exists anywhere in the range. The reed base pages state "Blend with 10-30% fragrance oil", a 25–30% working ratio and a 24–48 hour rest before bottling. The 120 ml bottle this page costs against sits outside the published 6–8 reed band, which is said plainly rather than smoothed over.
For bulk pricing, GST invoicing, reed quantities including spares for a production run, or documentation on any product, message us on WhatsApp at +91 7397976926. If you run a soak-and-weigh and want a second pair of eyes on the numbers before you write them into a specification, send them over.
Frequently asked questions
- Eight reeds and the liquid disappearing — should you reduce the reed count?
- Balancing throw against realistic longevity in non-air-conditioned homes
- How many fibre reeds to test in a 100 ml bottle
- Fibre reeds or natural rattan reeds with a ready-made base?
- Strong for three days then weak — base or reeds?
- Which raw materials to test first for a 100 ml summer diffuser
- Testing performance over 30 days on weight loss and reed condition
Customer reviews: The ten reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on their product pages. Names, star ratings, dates and products are as recorded by Judge.me; wording is unedited. They describe fragrance oils used in candles and hardware as supplied; none of them is a measurement of reed uptake, diffuser throw or product life, and the review pool holds no review for either fibre reed listing.
Figures verified October 2026: Reed ladders — black ₹236 / 25 = ₹9.44 a reed, ₹400 / 50 = ₹8.00, ₹800 / 100 = ₹8.00, ₹4,000 / 500 = ₹8.00; white ₹265 / 25 = ₹10.60, ₹450 / 50 = ₹9.00, ₹900 / 100 = ₹9.00, ₹4,500 / 500 = ₹9.00. Colour gap: ₹265 − ₹236 = ₹29 ÷ 25 = ₹1.16 a reed, and ₹50 ÷ 50 = ₹1.00 a reed at every rung above. Fall from the 25-pack to the 50-pack: black ₹1.44 a reed = 15.25%, white ₹1.60 = 15.09%; the 25-pack is 9.44 ÷ 8.00 = 1.18, so 18% dearer per reed than the 50-pack. Reeds per bottle at ₹8.00: 4 = ₹32.00, 5 = ₹40.00, 6 = ₹48.00, 7 = ₹56.00, 8 = ₹64.00, 10 = ₹80.00, 12 = ₹96.00; at ₹9.00: ₹36.00, ₹45.00, ₹54.00, ₹63.00, ₹72.00, ₹90.00, ₹108.00. Across 240 bottles at eight reeds: black ₹15,360, white ₹17,280, a ₹1,920 difference; eight reeds to six saves ₹16.00 a bottle and ₹3,840 across 240. Trial arithmetic: 4 + 6 + 8 + 10 + 12 = 40 reeds a replicate, plus 10 for the soak-and-weigh, so 50, 90 and 130 reeds at one, two and three replicates, bought as ₹400, ₹800 and ₹1,200 of black packs. Glass 120 ML Pack of 10 ₹1,062 = ₹106.20 each; 50 ML Pack of 10 ₹826 = ₹82.60 each; current stock 24 and 16 packs = 240 and 160 bottles, a stock ceiling rather than a listed-pack ceiling. Base Pure Performance ₹1,099 ÷ 500 ml = ₹2.198/ml, so 90 ml at the published 25% ratio = ₹197.82 and one pack fills 500 ÷ 90 = 5.56 bottles; the 100 g pack is ₹325 = ₹3.25/g and the two cannot be reduced to one per-unit price because no density is published for any base. Oil Citrus Lemon ₹300 / 100 gm = ₹3.00/g and ₹1,420 / 500 gm = ₹2.84/g, 30 g a bottle at 25%, so 180 g = ₹600, 330 g = ₹1,200 as four 100 gm packs and 480 g = ₹1,420 as one 500 gm pack. Trial totals ₹4,260, ₹6,322 and ₹8,041 with reed shares of 9.4%, 12.7% and 14.9%; the soak rig ₹400 + ₹450 + ₹354 + ₹300 = ₹1,504. Hardware per 120 ml bottle ₹106.20 + ₹64.00 = ₹170.20. No CSI reed, base, fragrance oil or bottle page publishes a reed diameter, a pore size, a fibre count, an uptake figure, an evaporation rate, a volatility figure, a viscosity, a density, a product life, a shelf life, a storage temperature or a coverage area, and none is stated, estimated or implied here. Grams gained per reed is the reader's own measurement under the reader's own soak time, immersion depth and drip count. Heat and airflow are described qualitatively only — no rate, percentage, multiplier or per-degree figure appears — and no short elevated-temperature observation is converted into real-time product life. Stated specifications as published: fibre reeds 20.3 cm, "uniform pore structure — no swelling, no clogging, no splitting", "consistent diffusion from day 1 to day 30", 6–8 reeds for a 50–100 ml bottle, "use 10+ for maximum throw in larger rooms — the base will evaporate faster at higher reed counts", "avoid placing in direct sunlight or near heat sources which accelerate evaporation"; reed bases "Blend with 10-30% fragrance oil", 25–30% working ratio, 24–48 hour rest before bottling. CSI lists fibre reeds only and no rattan reed; the Pure Performance page's twice-stated "rattan reed sticks" is page copy referring to a reed type CSI does not sell, and the bottle page's "Size: 50 and 100ml" sits against its own 50 ML and 120 ML variants — both named here and neither resolved. Blend ranges are formulation windows published by CSI, not safety limits; for anything certified or approved by IFRA, work from your supplier's own documentation and a qualified adviser. Prices and availability change — the linked product pages are always authoritative.