I Am Making 100 Reed Diffusers of 120 ml Each — How Do I Calculate Base Requirements When the Carrier and Fragrance Oil Have Different Densities?
Share
How much base for all 100? 11,621.4 g of blend without losses; with a worked 3% allowance, 11,970 g: 2,394 g of oil and 9,576 g of base. At 0.95 g/ml that base is 10,080 ml, so 21 bottles of 500 ml.
Why not just take 20% of 120 ml? By volume you'd get 21.6% by weight, not 20%. Treating 1 g as 1 ml instead overfills each bottle to 123.9 ml.
What does the run cost at CSI? 21 × 500 ml of Pure Performance or Lift (₹23,079.00), 2,500 g of Bergamot Amber as five 500 gm (₹13,590.00), 100 Gold 120 ML bottles (₹10,620.00) and 600 reeds (₹4,800.00): ₹52,089.00, ₹520.89 a diffuser in materials.
- Straight answer: 21 bottles of base, and why it isn't 20
- One 120 ml fill, three ways to count it
- From one bottle to 100: the batch sheet
- Measuring the three densities you actually need
- Why a 100-bottle run comes up short: the cause table
- The test before the run
- The purchase: packs, rupees and what's left
- The CSI items for this run
- Frequently asked questions
One 120 ml fill, three ways to count it
Your run, restated exactly: 100 reed diffusers, 120 ml each, a carrier and a fragrance oil that don't weigh the same per millilitre, and a 20% fragrance formula (this series' default, by weight; use your own percentage in the same steps). Before any rupee is spent, settle what "120 ml" means. If it is the liquid you promise on the label, the bottle must hold 120 ml plus room for six reeds and some headspace. The Gold 120 ML page states no brim capacity (it also says "Size: 50 and 100ml"), so fill one bottle with water by weight to the shoulder and check. If it can't take 120 ml with reeds in, your real fill is less, and every number below scales down with it.
Now count one fill three ways. The densities are worked examples: oil 1.05 g/ml and base 0.95 g/ml. Fragrance oils vary, some above and some below 1 g/ml, and no CSI oil or base page in our data states one.
| Method | Oil | Base | Volume in the bottle | Load by weight | Base ml for 100 bottles (no loss) |
|---|---|---|---|---|---|
| A · 20% by volume | 24 ml = 25.2 g | 96 ml = 91.2 g | 120 ml | 21.6% | 9,600 |
| B · "1 g = 1 ml" | 24 g = 22.86 ml | 96 g = 101.05 ml | 123.9 ml (+3.9) | 20.0% | 10,105 |
| C · blend density | 23.24 g = 22.14 ml | 92.97 g = 97.86 ml | 120.0 ml | 20.0% | 9,786.4 |
Method A gets the volume right and the formula wrong: with a dense oil it puts 21.6% into a product your batch sheet calls 20%, and a light oil would push it the other way. Method B gets the formula right and the volume wrong: 3.9 ml too much per bottle, which is the headspace you needed for the reeds, and about 319 ml more base over the run than method C needs. Method C is the only one that hits both. It rests on one estimate, the blend density: 1 ÷ (0.2 ÷ 1.05 + 0.8 ÷ 0.95) = 0.9684 g/ml. That formula assumes the two liquids' volumes simply add. Real blends can shrink or swell slightly on mixing, which is why you weigh a real blend. The general case for formulating by weight, and how to compare bases fairly when their densities differ, is the fair-formulas-by-weight post; this page is the production arithmetic.
From one bottle to 100: the batch sheet
A hundred fills of 116.21 g is 11,621.4 g of blend. Production always loses some: liquid left in the mixing vessel and funnel, the bottle you overfill and correct, and the retained samples you should keep from every batch. A worked 3% allowance covers that for a run this size; measure your own losses on the first run and adjust.
| Line | Calculation | Result |
|---|---|---|
| Blend per bottle | 120 ml × 0.9684 g/ml | 116.21 g |
| Blend for 100 | 100 × 116.21 g | 11,621.4 g |
| With 3% allowance | × 1.03 | 11,970 g |
| Oil (20%) | 11,970 × 0.20 | 2,394 g |
| Base (80%) | 11,970 × 0.80 | 9,576 g |
| Base to buy, in ml | 9,576 ÷ 0.95 | 10,080 ml |
| 500 ml bottles | 10,080 ÷ 500, rounded up | 21 (420 ml spare) |
| Without the allowance | 9,786.4 ml ÷ 500 | 20 bottles, 213.6 ml spare (2.2% of need) |
The last two rows are the decision. Twenty bottles cover the run only if your losses stay under about two per cent, and for a first run of 100 they probably won't. Buy 21. If your measured base density is higher than the worked 0.95, the count may drop back to 20; if lower, it may rise. The next table shows how far.
| Base density | Blend to mix | Base ml | 500 ml bottles |
|---|---|---|---|
| 0.90 g/ml | 11,451 g | 10,179 ml | 21 |
| 0.95 g/ml | 11,970 g | 10,080 ml | 21 |
| 1.00 g/ml | 12,479 g | 9,983 ml | 20 |
| 1.05 g/ml | 12,978 g | 9,888 ml | 20 |
Notice two things. Lighter bases need more millilitres for the same grams, but they also make the blend lighter, so a 120 ml fill weighs less; the two effects partly cancel, which is why the count only moves by a bottle across a wide range. And the total grams you mix change with density too, so the oil you need changes: always recompute the oil from the measured blend, never carry it over from a different base. A related live guide works the simpler case of 100 bottles of 100 ml at 20% (how much base for 100 bottles of 100 ml); use it to cross-check your own sheet.
Measuring the three densities you actually need
You need the base's density (to buy it), the oil's density (to check the estimate) and, most of all, the blend's density (to fill by weight). All three come from the same method: tare a beaker on your scale, pour a measured volume, weigh it, divide. CSI's Silicon Measuring Beaker 100 ML (₹300.00) has a printed scale, but check that scale once against 100 g of water at room temperature before trusting it. CSI's Candle Making Weighing Scale (₹354.00) states no capacity or resolution, so confirm yours reads to at least 0.1 g for this job.
If the measured blend density differs from the estimate, believe the measurement. If it differs a lot, that is also a signal: a blend that changes volume noticeably on mixing deserves a closer look for clarity and stability before you mix 12 kg of it. For checking a new base lot when it arrives, see incoming QC for a new lot.
Why a 100-bottle run comes up short: the cause table
| Cause | What you'd see | Discriminating check | Fix |
|---|---|---|---|
| Solvent / base choice | Base runs out early or bottles are left over after switching base | Weigh 100 ml of the base actually used vs the one you planned with | Recount bottles from the measured density of the base you'll mix |
| Oil character and load | Load "drifts" between oils; one oil fills more bottles than another | Measure each oil's blend density; check the batch sheet's basis (weight, not volume) | Recompute oil grams per oil; keep 20% by weight for every scent |
| Bottle and fill | Overflow when reeds go in; uneven levels on the shelf | Water test to the shoulder with six reeds inserted | Set the fill in grams from that test; fill on a scale, not to a line |
| Reeds | Level drops before the cap goes on; reeds soak up liquid in storage | Weigh a filled bottle before and after inserting dry reeds | Ship reeds separately, as many makers do, and count reed uptake in the fill |
| Environment | The same "120 ml" weighs differently on a hot afternoon | Measure density at two room temperatures | Fill by weight; record the room temperature on the batch sheet |
| Measurement error | Totals don't reconcile; base short by a few hundred ml | Check the beaker scale with water; check the scale with a known weight | Calibrate once; tare every container; one scale for the whole run |
| Process losses | Final bottles short; nothing left for retains | Weigh what's left in the vessel and funnel after the first run | Set your own allowance from that weight (worked: 3%) |
Three of these rows are about measuring, not formulating, and they are the commonest reason a careful spreadsheet runs short. The reed row matters for 120 ml in particular: a full bottle plus six reeds plus a cap is a tight fit, and a bottle that weeps in the courier box is a closure problem or a liquid one to diagnose, not a formula fault. If bottle-to-bottle levels vary across the run, checking mixing and filling consistency is the next read.
The test before the run
If the base and oil are already proven together in your product, skip to the purchase; the density step above is the only test you need. If not, run the series' controlled test first. Two arms, for example Pure Performance and Lift, or a CSI base against the carrier you use now; each arm three Gold 120 ml bottles, each filled from its own labelled 100 g batch at 20% by weight; six black fibre reeds per bottle; one shelf, one room; 30 days. CSI does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol, so a solvent arm is your own supplier's.
Safety for the run, stated plainly: keep diffusers and bulk liquids away from flames and heat; avoid skin and eye contact; keep finished products away from children and pets. Flammability, storage and labelling depend on the full formula. Get the SDS for your oil and for any solvent you supply yourself; CSI base pages publish no SDS in the text we captured, so ask us on WhatsApp for whatever technical data exists. None of this is legal advice.
The purchase: packs, rupees and what's left
| Line | Need | Buy | ₹ | Left |
|---|---|---|---|---|
| Base (Pure Performance or Lift) | 10,080 ml | 500 ml × 21 | ₹23,079.00 | 420 ml |
| Oil (Bergamot Amber, worked) | 2,394 g | 500 gm × 5 | ₹13,590.00 | 106 g |
| Gold 120 ML bottles | 100 | Pack of 10 × 10 | ₹10,620.00 | 0 (11 packs for spares: ₹11,682.00) |
| Fibre reeds (Black) | 600 | 500 + 100 | ₹4,800.00 | 0 |
| Total | ₹52,089.00 | ₹520.89 a diffuser |
Three notes on the packs. Base: Longevity instead would be ₹27,216.00 for the same 21 bottles. Oil: on this oil, as on several in our range, the 1 kg costs a little more than two 500 gm, so 2,500 g is cheapest as five 500 gm. Reeds: white reeds for the same 600 are ₹5,400.00. What a dearer base adds per bottle, and whether it earns it, is the extra cost per 120 ml diffuser. If you're scaling a formula that worked at 100 g, mixing order, vessel and retained samples are covered in scaling a 100 g formula to 10 kg; for a run built around a fixed quantity of oil instead of a fixed bottle count, the 1 kg of Jasmine calculation.
CSI publishes no lead times and lists no base size above 500 ml, and promises no lot continuity. For 21 bottles, ask on WhatsApp whether they can come from one lot; if not, weigh 100 ml from each lot and keep lots separate in the batch record.
The CSI items for this run
Chosen on page statements, price, pack sizes and stock on 7 October 2026, not on performance: CSI publishes no diffusion or density data. Family positioning is each page's own description. Each card says when not to buy.
| Size | Price | Unit price | For 100 × 120 ml |
|---|---|---|---|
| 100g | ₹325.00 | ₹3.25 | the 100 g test batch that measures your blend |
| 500 ML | ₹1,099.00 | ₹2.20 | 21 for the run at the worked densities |
| Size | Price | Per ml | For 100 × 120 ml |
|---|---|---|---|
| 500 ml | ₹1,099.00 | ₹2.20 | same count: 21 bottles = ₹23,079.00 |
| Size | Price | Per ml | For 100 × 120 ml |
|---|---|---|---|
| 500 ml | ₹1,296.00 | ₹2.59 | 21 bottles = ₹27,216.00 |
| Size | Price | Per gram | For 100 × 120 ml |
|---|---|---|---|
| 15 gm | ₹105.02 | ₹7.00 | too small for the run |
| 50 gm | ₹280.00 | ₹5.60 | too small for the run |
| 100 gm | ₹560.00 | ₹5.60 | the 100 g test batch needs 20 g |
| 500 gm | ₹2,718.00 | ₹5.44 | five = 2,500 g for the run (106 g spare) |
| 1 kg | ₹5,437.00 | ₹5.44 | two + one 500 gm costs ₹2.00 more than five 500 gm |
| Pack | Price | Per unit | For 100 × 120 ml |
|---|---|---|---|
| 50 ML Pack of 10 | ₹826.00 | ₹82.60 | not this run |
| 120 ML Pack of 10 | ₹1,062.00 | ₹106.20 | 10 packs = 100 (₹10,620.00); 11 for spares (₹11,682.00) |
| Pack of 100 | ₹800.00 | ₹8.00 | with the 500: 600 reeds |
| Pack of 500 | ₹4,000.00 | ₹8.00 | same per reed as the 100 |
Not for this run: CSI HyperDiffusion Base (out of stock on 7 October 2026); Room & Linen Spray Base and Perfume Base, which are not reed bases; and Isopropyl Alcohol Spray, a cleaner that is never a diffuser ingredient. For buying the trial before the run, see the 20-sample, three-base purchase sheet or the first comparison buy.
CandleMakingSuppliesIndia sells the bases, oil, bottles and reeds named here. This page still tells you that none of our oil or base pages in the data we checked states a density, that we sell no DPG, DPM, IPM, Augeo-type solvent or perfumer's alcohol, that our base pages publish no composition or SDS in the text we captured, and that if your own carrier wins your test you should keep it.
Every price was checked on the live store on 7 October 2026, with stock checked per size: every item in the purchase sheet is in stock on that date, and CSI HyperDiffusion Base is out of stock and not offered. Page wording is quoted as the page's description.
All densities, the blend-density estimate, the 3% allowance, the target window and the pass rule are labelled worked examples or in-house choices; the diagram is illustrative. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Have Been Making Reed Diffusers with DPG but Want to Try a Ready-Made Base — Should I Buy 500 g or 1 Kg for My First Comparison Trials?
- I Want to Make 20 Reed Diffuser Samples Using Three Different Bases — How Much of Each Base and Fragrance Oil Should I Purchase?
- I Have 1 Kg of Jasmine Fragrance Oil — How Much Reed Diffuser Base Should I Buy to Make a 20% Fragrance Formula?
- My Current Base Costs ₹300 per Kg and a Ready-Made Base Costs ₹500 — How Do I Calculate the Extra Cost per 120 ml Diffuser?
- I Have Finalised a 100 g Reed Diffuser Formula — How Do I Scale It to 10 Kg While Maintaining the Same Fragrance and Carrier Percentages?
- My New Reed Diffuser Base Performs Better in Small Trials — What Pilot-Batch Size Should I Make Before Purchasing 25 Kg?
- I Am Switching Reed Diffuser Base Suppliers — What Incoming Quality-Control Checks Should I Perform Before Using a New Lot in Production?
- I Am Making 1,000 Reed Diffusers per Month — How Do I Calculate the Savings from a Base That Performs Well at 18% Fragrance Instead of 25%?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Blue Ocean Fragrance Oil, Citrus Lemon Fragrance Oil, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Sacred Sandal Ember Fragrance Oil, Woody Oud Fragrance Oil. They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — snehal Chaudhary, Sooraj R, Avanthi Cheeli, Yashvi Shah, Renam Dhoundiyal, Urvashi Patel. Reviews below five stars are included as published, not filtered out.
Figures verified 7 October 2026, CSI live pricing: Pure Performance Reed Base Oil 100g ₹325.00, 500 ML ₹1,099.00; Lift Base 500 ml ₹1,099.00 (₹2.20 a ml); Longevity Base 500 ml ₹1,296.00 (₹2.59 a ml); CSI HyperDiffusion Base ₹1,499.00 (out of stock); Bergamot Amber Fragrance Oil 15 gm ₹105.02, 50 gm ₹280.00, 100 gm ₹560.00, 500 gm ₹2,718.00, 1 kg ₹5,437.00; Gold Reed Diffuser Bottle Pack of 10, 50 ML ₹826.00, 120 ML ₹1,062.00 (₹106.20 each); Fiber Diffuser Reeds (Black) 100 ₹800.00, 500 ₹4,000.00 (₹8.00 each); (White) 100 ₹900.00, 500 ₹4,500.00; Silicon Measuring Beaker 100 ML ₹300.00, 250 ML ₹600.00; Candle Making Weighing Scale ₹354.00. Per unit = price ÷ quantity, two decimals.
Non-price figures: "100 diffusers" and "120 ml each" are the reader's figures (title); 20% by weight is this series' default. Oil 1.05 g/ml and base 0.95 g/ml (and 0.90–1.05 in the sensitivity table) are worked densities, not CSI data; no CSI page in our data states a density. The blend density formula assumes volumes add. The 3% allowance, six reeds per bottle, 60–75 day target window, 2 m sniff distance and 1–5 score are worked examples or in-house choices. Bergamot Amber prices the oil line as a worked example. No performance figure on this page is CSI test data. Costs are materials only and exclude labour, freight, packaging and GST. Festival dates are calendar facts.