I Have Two Different Wax Batch Numbers in Inventory — Can I Combine Them in One Production Batch or Should I Keep Them Separate for Traceability?
Share
Why not just mix them to make stock uniform? Because a blended batch has two parent lots. If a problem appears, both lots become suspects and every batch they fed must be checked.
When does combining make sense? Usually to use up the tail end of an older lot, when there is not enough left for a full batch on its own.
What do I write on the batch sheet? Both batch references, the weight from each, and the percentage split, for example 3.5 kg from one and 5.7 kg from the other.
Why separate is the default
Traceability is simplest when the relationship is one to one: one wax batch feeds a known set of production batches, and each production batch draws from one wax batch. If a customer later reports a problem, you look up the production batch, find the wax batch, and know precisely which other candles share it.
Combining two wax batches turns that line into a branch. The production batch now has two wax parents. If a complaint arrives, both parent batches become suspects, and every other production batch either of them fed must be considered. Your investigation doubles in size before it has started.
There is also a quality reason. Two batches of the same wax can differ slightly, which is why they are recorded separately in the first place. A melt that combines them in an unknown ratio produces candles whose behaviour sits somewhere between the two, and a second melt with a different unknown ratio sits somewhere else. That is a source of batch-to-batch variation you created yourself.
So the default rule for the production floor is short: one production batch, one wax batch. Everything else on this page is about the narrow situation where breaking that rule is sensible, and how to do it without losing control.
When combining is reasonable
The common real-world case is the remainder. You are scenting 10 kg batches, and the older wax batch has 3.5 kg left. That is not enough for a full batch on its own, and making a small one-off batch of about 3.8 kg scented wax disrupts the schedule and may not match your melter's usual behaviour. Finishing the remainder inside a normal batch, together with some of the newer wax, is a practical choice.
Combining is reasonable when all of these are true:
The alternative: a small separate batch
Combining is not the only way to use a remainder, and sometimes it is not the best. You can instead scent the remainder on its own as a short batch. With 3.5 kg of wax at 8% of total weight, the scented batch is 3.5 ÷ 0.92 ≈ 3.8 kg, which fills about 19 candles of 200 g. Those 19 candles stay traceable to a single wax batch, which is cleaner.
The cost is practical. A short batch takes nearly as much set-up and cleaning time as a full one, and a smaller mass of wax heats and cools faster than your usual batch, so its pour behaviour may differ slightly from the rest of the run. If you have a small melter for short batches and the 19 candles can go to general stock, the separate route is often worth it. If you are mid-way through an order that needs every batch to behave identically, a full-size combined charge may be the steadier option.
Either choice is defensible. What is not defensible is making the choice differently each time depending on who is on shift, so decide which route your workshop prefers and write it into the procedure.
Worked example: finishing a remainder
Your standard batch is 10 kg of scented wax at 8% fragrance load of total weight, which is 9.2 kg of wax and 0.8 kg of oil, and it fills 50 candles of 200 g. The older wax batch, which you record as W-07, has 3.5 kg remaining. The newer batch, W-08, is validated and ready.
Weigh 3.5 kg of W-07 and 5.7 kg of W-08, making the full 9.2 kg. As proportions of the wax, that is 3.5 ÷ 9.2 ≈ 38% from W-07 and 5.7 ÷ 9.2 ≈ 62% from W-08. Record both, along with the production batch code. The fifty candles from this batch are now traceable to both parents, and every other batch remains traceable to one.
| Field | Entry | Why it matters |
|---|---|---|
| Production batch code | Your code for this batch | Links candles to the sheet |
| Wax batch 1 | W-07, 3.5 kg (38%) | Older remainder, fully used |
| Wax batch 2 | W-08, 5.7 kg (62%) | Newer batch, remainder stays on its shelf |
| Total wax | 9.2 kg | Must match the recipe |
| Fragrance oil | 0.8 kg, oil batch reference | 8% of 10 kg total |
| Mixing note | Fully melted and stirred before scenting | Confirms even distribution |
| W-07 status | Closed, final use this batch | Stops anyone looking for it later |
Close W-07 on your raw-material record the same day, noting that its final use was this batch. If a question about W-07 ever arises, you can list every batch it fed, and this combined batch is clearly marked as the last.
When not to combine
An unvalidated batch
If one of the batches has not passed its comparison test, it is not approved material, and adding it to approved wax only hides an unknown. Test it first, on its own.
A batch you are investigating
If either batch is on hold because of a suspected difference, such as extra frosting or weaker adhesion, keep it out of production entirely until the investigation ends. Combining it would dilute the evidence and spread the problem.
A customer order that must match exactly
If a client approved a sample and expects every candle to match it, produce the whole order from one wax batch where you can. A combined batch is traceable, but it is still a slightly different material from its neighbours.
Two different products
Different wax products are never “two batches”. Combining CSI 464 with CSI 468, for example, is a reformulation that changes melt behaviour and stated guidance, not a lot-management decision. It needs full testing as a new formula.
Making the rule work on the floor
Write the rule on the wall by the melter in a single line: one production batch, one wax batch, unless a supervisor approves a weighed and recorded combination. Keep a small form or a dedicated section of the batch sheet for combined charges, so recording the split is quick rather than an afterthought.
If you are unsure what batch information your supplier has provided for the wax in your inventory, ask. For CSI wax, message CSI on WhatsApp (+91 7397976926) with your order details and ask what batch information they can share. Record only what they confirm, and use your own internal references for everything else.
Check the rule in practice now and then. Pick a finished batch at random, look up its sheet, and confirm that the wax references and weights add up to the recipe. A few minutes of checking each month keeps the habit alive long after the first enthusiasm fades.
Where this page fits
CSI already has guides that cover parts of this question. This page takes the production-floor angle; these go deeper on the rest:
Three things to buy for this job
| Option | Price | Status on the September 2026 pull |
|---|---|---|
| 10 kg capacity | ₹21,240.00 | In stock |
| 20 kg capacity | ₹25,960.00 | In stock |
| Option | Price | Status on the September 2026 pull |
|---|---|---|
| Digital scale | ₹354.00 | In stock |
| Option | Price | Status on the September 2026 pull |
|---|---|---|
| Pack of 5 | ₹118.00 | In stock |
| Pack of 50 | ₹1,062.00 | In stock |
| Pack of 100 | ₹1,888.00 | In stock |
CANDLEMAKINGSUPPLIESINDIA supplies raw materials and production equipment, not finished candles. This guide separates what is general production practice from what CSI's own product pages state, and labels every suggested tolerance or timing as a starting point for your own validation.
Prices are live CSI prices from September 2026; product pages are authoritative. Where a spec is not published — such as the scale's capacity or the thermometer's range — this guide says so rather than filling the gap.
For bulk quotes, batch details on a specific delivery, GST invoicing, IFRA and MSDS, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Have Half a Drum of an Older Fragrance Batch and a New Drum Has Arrived — Should I Mix Them Together or Transition Between Batches Separately?
- My Fragrance Supplier Changed the Colour of an Oil but Says the Formula Is Unchanged — What Production Tests Should I Run Before Accepting It?
- My Candle Hot Throw Changes Slightly Between Raw-Material Batches — How Do I Determine Whether the Variation Comes From Wax, Fragrance or Wick?
- I Buy Candle Raw Materials in Bulk and Cannot Afford to Discover Quality Differences After Production — What Incoming Checks Should I Perform Before Releasing Materials for Use?
- Should I Keep a Retained Sample From Every Wax and Fragrance Batch Used in Commercial Candle Production?
- How Much Wax and Fragrance Should I Keep as a Retained Sample If I Need to Investigate Future Customer Complaints?
- I Have a Customer Complaint About a Candle Made Three Months Ago — How Can Batch Codes Help Me Identify Which Wax, Fragrance and Wick Were Used?
- I Produce the Same Candle Every Month — What Information Should Go on My Internal Batch Sheet so I Can Compare Production Runs Over Time?
- How to Maintain Raw Material Batch Records for Candle Production
- How to Create Batch Sheets for Candle Manufacturing
Customer reviews: The reviews at the top are genuine, published Judge.me reviews — Mohabatti Ki Dukaan (5★, verified); Mahak agarwal (5★, not recorded as verified); Dipali Sable (5★, verified); Arminder Kaur (5★, verified); Lalitha Jagan (5★, not recorded as verified). Names, ratings, dates and products as recorded by Judge.me.
Product facts (September 2026, CSI live store): Electric Wax Melter (Imported) 10 kg capacity ₹21,240.00, 20 kg capacity ₹25,960.00; its product page states 9.5 litres per melt, a 60–100°C display with ±10°C deviation, and about 30 minutes to melt 10 kg of soy at 100°C. Mini melter (1 litre) ₹2,360.00. Steel Pouring Pitcher 600 ml ₹708.00 (150 ml out of stock). Weighing scale ₹354.00 and pen thermometer ₹354.00, capacity/range not published. Luxury Soy Wax CSI 464 (flakes) ₹507.40/kg at every pack; Eco Candle Wicks ₹5.90 (C1) / ₹9.44 (C2) each. Published oil flashpoints include Roasted Coconut 93°C and Gardenia 98°C.
Assumptions: Fragrance load is a percentage of total candle weight (200 g = 184 g wax + 16 g oil at 8%); planning wastage 5%. Melted soy wax taken as roughly 0.9 g per ml for rough volume conversions. Tolerances, stir times, sampling plans, hold times and capacity rates on this page are suggested starting points to validate in your own production, not measured CSI data. Worked examples are illustrations. Prices and availability change — product pages are authoritative.