I Want to Make 100 Jasmine, 100 Rose and 100 Lavender Reed Diffusers — Should I Test Each Fragrance with the Same Base Before Ordering Bulk Oils?
Share
What is the test? Eighteen bottles: each oil at 15% and 20%, three bottles each, 21 days, weighed every 3 days, sniffed blind, with sealed clarity samples. Any oil that fails goes to a second base for 21 more days; the others go straight to a bulk order and a pilot.
What does testing cost? ₹9,170.62 with three 115 g oil packs, four bottles of Lift Base, reeds and bottles; ₹4,774.62 if you test in your own base. Both stages together come to ₹40.71 per eventual diffuser.
How much oil do 300 diffusers need? It depends on the loads you approve. Worked example at 20% jasmine, 15% rose and 15% lavender with a 3% allowance: 2,060 g, 1,545 g and 1,545 g, bought as 15 gm + 50 gm + 4 × 500 gm (₹8,177.00), 50 gm + 500 gm + 1 kg (₹4,873.40) and 50 gm + 500 gm + 1 kg (₹8,111.00).
- Straight answer: test all three first?
- Why one base and one load won’t fit three florals
- The cause table: oil, load, base, reeds, bottle, room, nose
- Stage 1: eighteen bottles in the planned base
- Stage 2: a second base for any oil that fails
- Quantity maths at the tested loads
- Pack selection per oil, and the full order
- What to buy
- Frequently asked questions
Why one base and one load won’t fit three florals
Your plan, restated: 100 jasmine, 100 rose and 100 lavender reed diffusers, 300 bottles, made with one base. The title gives no load, bottle, reed count or base, so this page uses the series default (100 g fill by weight in a 120 ml bottle, six fibre reeds) and Lift Base as the worked shared base; substitute your own and keep it identical across the three oils.
Three oils, three behaviours
Lavender accords tend to lean on lighter, brighter materials that leave a reed early; many jasmine accords lean on denser floral materials that release slowly; roses sit somewhere between and can be the most colour- and haze-prone of the three in some carriers. Odour strength per gram also differs widely, so 20% of one can read louder than 20% of another. These are tendencies, not facts about CSI’s oils, whose compositions we don’t publish. The same-base question in general, across very different families, is covered in CSI’s live guide on using one base for lavender, jasmine, vanilla and coffee; this page owns the three-floral run and the buy that follows.
Why two loads, not one
A single 20% screen tells you pass or fail. Two loads tell you where each oil sits: if 15% ties with 20%, you save a quarter of that oil across 100 bottles; if only 20% passes, you know the floor. That decides the bulk quantity, which is the point of testing first. Whether to standardise one load across a range or set one per oil is the standard-versus-individual load post; this page assumes per-oil loads are acceptable to you.
What the page ranges do and don’t tell you
All three CSI oil pages give a 10-30% reed-diffuser range. That is the supplier’s usage guidance, the same span for all three, and it cannot tell you which oil needs which load in your base. It is a reason to stay inside 10-30%, not a substitute for the test.
The cause table: oil, load, base, reeds, bottle, room, nose
What makes one of the three fail Stage 1, and how to tell which. "What you’d see" is what makers commonly report, not CSI test data.
| Cause | What you’d see | Discriminating test | Fix |
|---|---|---|---|
| Oil · slow, dense accord | Pleasant at the tip, faint at 3 m; slow weight loss | 15% vs 20% both weak, other oils fine | Different accord (accord versus load) |
| Oil · low strength per gram | Weak everywhere; 20% clearly beats 15% | Load step changes the score | Higher approved load, if clear and costed |
| Oil · haze or colour | Sealed sample hazy or darker by day 21 | Room vs cool vs light-exposed retained jars | Lower load or second base (rose cloudy at 25%) |
| Oil · lot or supplier | Bulk lot reads differently from the test pack | Pilot from the bulk lot vs retained test sample | Approve each lot before filling |
| Load · past the plateau | 20% no better than 15% | Load pair inside one base | Approve 15% (the floral load-ceiling post) |
| Base · suits two oils, not the third | Two pass; one fails at both loads | Stage 2: failing oil in a second base | Separate base for that SKU |
| Reeds | Mixed reed batches between oils | One reed type, fresh, every bottle | Same reeds everywhere |
| Bottle and fill | Different fills or bottles per oil | Same bottle, 100 g by weight | Identical bottles |
| Room and season | Oils tested in different rooms or weeks | All 18 bottles on one shelf, interleaved | One room, temperature logged |
| Nose · fatigue and order | Lavender always sniffed first | Coded bottles, random order, fresh noses | Blind panel only |
Stage 1: eighteen bottles in the planned base
| Arm | Oil | Oil g | Base g | What it answers |
|---|---|---|---|---|
| J15 / J20 | Jasmine | 15 / 20 | 85 / 80 | Where jasmine passes, if at all |
| R15 / R20 | British Rose | 15 / 20 | 85 / 80 | Where rose passes; haze and colour watch |
| V15 / V20 | Lavender | 15 / 20 | 85 / 80 | Where lavender passes; early-fade watch |
Materials: 108.5 g of each oil (six bottles plus two 10 g screen samples), 1,534.5 g of base (4 × 500 ml of Lift at a worked 1.0 g/ml, about 465.5 g spare), 108 reeds and 18 identical bottles. A 100 g + 15 g pack of each oil leaves 6.5 g spare.
The general 30-day method (weighing, logging, reed condition) is in CSI’s live guide on testing reed diffuser performance over 30 days; this page shortens it to 21 days because the decision here is pass or fail per oil, and pilots follow.
Stage 2: a second base for any oil that fails
Take the failing oil at its better Stage 1 load and run 6 bottles for 21 days: three in the shared base and three in a second base, here Softness Base as the worked example. Worked case, lavender at 20%: 120 g of lavender, 240 g of Softness and 240 g of Lift from the Stage 1 spare, 36 reeds. The CSI items for that case cost ₹3,042.02. Lavender is the worked example only because Softness’s page names lavender and Lift’s doesn’t; in your test any of the three could be the one that fails, or none.
| Result | What it means | What to buy |
|---|---|---|
| Second base passes, shared base fails | That oil needs its own base | Second base for that SKU only; size it separately |
| Both fail | The oil is the limit in either base | A different accord, tested before bulk (the accord post) |
| Both pass now | Stage 1 result was noise or a process slip | Retest once in the shared base; keep one base if it passes |
| Second base clearer but weaker | A trade-off, not a pass | Decide on your customer bar; don’t average |
Quantity maths at the tested loads
Worked example only: suppose Stage 1 approves jasmine at 20%, rose at 15% and lavender at 15%. At a 100 g fill, 100 bottles of each need 2,000 g of jasmine, 1,500 g of rose and 1,500 g of lavender, and 25,000 g of base across all 300. Add an allowance for spills, beaker residue, retained samples and the pilot; 3% is used here as a worked figure (measure your own on the pilot). Weigh, don’t measure by volume; the live guide on quantities for 100 bottles with density and filling losses covers the conversion if your bottles are labelled in ml.
| Line | Load | At fill | With 3% | Notes |
|---|---|---|---|---|
| Jasmine | 20% | 2,000 g | 2,060 g | worked approved load |
| British Rose | 15% | 1,500 g | 1,545 g | worked approved load |
| Lavender | 15% | 1,500 g | 1,545 g | worked approved load |
| Base (all three) | — | 25,000 g | 25,750 g | 52 × 500 ml of Lift at a worked 1.0 g/ml |
| Reeds | 6 each | 1,800 | — | add spares for customer replacement if you offer it |
| Bottles | — | 300 | — | 30 packs of 120 ML |
If your approved loads differ, change only the load column: oil = 100 × load in grams × 1.03; base = 100 g × 100 − oil, × 1.03. The same arithmetic for a four-oil range, with waste and retains per oil, is the four-oil purchase calculation; for five fragrances across 500 bottles, the 1 kg-each-versus-calculated post.
Pack selection per oil, and the full order
Each oil’s cheapest in-stock pack mix that covers the allowance, at CSI live pricing on 7 October 2026. The three oils do not price their packs the same way, so the mix differs per oil.
| Oil | Need | Buy | Grams | ₹ | Oil per bottle |
|---|---|---|---|---|---|
| Jasmine | 2,060 g | 15 gm + 50 gm + 4 × 500 gm | 2065 | ₹8,177.00 | ₹81.77 |
| British Rose | 1,545 g | 50 gm + 500 gm + 1 kg | 1550 | ₹4,873.40 | ₹48.73 |
| Lavender | 1,545 g | 50 gm + 500 gm + 1 kg | 1550 | ₹8,111.00 | ₹81.11 |
| Bulk oil total | ₹21,161.40 |
Why the mixes differ. Jasmine’s 1 kg costs ₹1.00 more than two 500 g packs, so its 2 kg is four 500 g packs; the same grams with two 1 kg packs cost ₹8,179.00, ₹2.00 more. Lavender’s 1 kg is ₹19.00 less than two 500 g packs, so it leans on the 1 kg; 50 g + three 500 g packs would cost ₹8,130.00, ₹19.00 more. British Rose’s 1 kg is the cheapest per gram of its sizes. Small packs (50 g, 15 g) top up the last few grams more cheaply than an extra 500 g.
Against the blind plan. Buying 2 kg of each oil on day 0 (jasmine as 4 × 500 g, rose and lavender as 2 × 1 kg) would cost ₹24,422.00; the tested plan at these worked loads costs ₹21,161.40, ₹3,260.60 less, and nothing is bought for an oil that might fail. The saving depends entirely on the loads your test approves; the protection against a stranded 2 kg does not.
| Line | Quantity | Buy | ₹ |
|---|---|---|---|
| Bulk oils | 2,060 + 1,545 + 1,545 g | per the table above | ₹21,161.40 |
| Lift Base | 25,750 g | 52 × 500 ml (worked 1.0 g/ml; weigh yours) | ₹57,148.00 |
| Reeds | 1,800 | 3 × 500 + 3 × 100 | ₹14,400.00 |
| Bottles | 300 | 30 packs of 120 ML | ₹31,860.00 |
| CSI side, Lift route | ₹415.23 a bottle | ₹1,24,569.40 | |
| CSI side in your own base | ₹224.74 a bottle | ₹67,421.40 |
CSI lists Lift only in 500 ml bottles; for about 52 of them, ask on WhatsApp for bulk pricing rather than paying list (₹57,148.00). CSI does not list a 25 kg base pack, and we won’t quote one here. The testing you did costs ₹12,212.64 in CSI items across both stages, ₹40.71 spread over 300 diffusers.
Before filling, write each approved oil into a one-page specification (oil, lot, load, base, reeds, fill, acceptance criteria, retained sample), as in the per-oil formula specification post. If lavender passes first and jasmine is still in Stage 2, the question of buying lavender now is the lavender-first purchase post.
What to buy
Chosen on page statements, price and stock on 7 October 2026, not on performance: CSI publishes no diffusion data. Each card says when not to buy. Bottles: Gold Reed Diffuser Bottle 120 ML, pack of 10 ₹1,062.00 (₹106.20 each).
| Size | Price | Per gram | 100 g bottles at 20% | Use |
|---|---|---|---|---|
| 15 gm | ₹103.00 | ₹6.87 | 0 | Stage 1, with a 100 g: ₹533.00 |
| 50 gm | ₹230.00 | ₹4.60 | 2 | part of the bulk mix |
| 100 gm | ₹430.00 | ₹4.30 | 5 | Stage 1 (50 + 50 + 15 g costs ₹563.00) |
| 500 gm | ₹1,961.00 | ₹3.92 | 25 | 4 of them for the run |
| 1 kg | ₹3,923.00 | ₹3.92 | 50 | ₹2.00 more than two 500 g |
| Size | Price | Per gram | 100 g bottles at 20% | Use |
|---|---|---|---|---|
| 15 gm | ₹94.40 | ₹6.29 | 0 | Stage 1, with a 100 g: ₹436.60 |
| 50 gm | ₹212.40 | ₹4.25 | 2 | part of the bulk mix |
| 100 gm | ₹342.20 | ₹3.42 | 5 | Stage 1 (50 + 50 + 15 g costs ₹519.20) |
| 500 gm | ₹1,593.00 | ₹3.19 | 25 | one for the run |
| 1 kg | ₹3,068.00 | ₹3.07 | 50 | cheapest per gram: one for the run |
| Size | Price | Per gram | 100 g bottles at 20% | Use |
|---|---|---|---|---|
| 15 gm | ₹105.02 | ₹7.00 | 0 | Stage 1, with a 100 g: ₹645.02 |
| 50 gm | ₹270.00 | ₹5.40 | 2 | same per gram as 100 g |
| 100 gm | ₹540.00 | ₹5.40 | 5 | Stage 1 |
| 500 gm | ₹2,620.00 | ₹5.24 | 25 | one for the run |
| 1 kg | ₹5,221.00 | ₹5.22 | 50 | ₹19.00 less than two 500 g |
| Size | Price | Per ml | Use |
|---|---|---|---|
| 500 ml | ₹1,099.00 | ₹2.20 a ml | Stage 1: 4 bottles; run: 52 at list price |
| Size | Price | Per ml | Use |
|---|---|---|---|
| 500 ml | ₹1,099.00 | ₹2.20 a ml | Stage 2 only: 240 g for the failing oil |
| Pack | Price | Per reed | Use |
|---|---|---|---|
| Pack of 25 | ₹236.00 | ₹9.44 | with a 100 for Stage 1 |
| Pack of 50 | ₹400.00 | ₹8.00 | — |
| Pack of 100 | ₹800.00 | ₹8.00 | Stage 1: 108 reeds from 100 + 25 |
| Pack of 500 | ₹4,000.00 | ₹8.00 | the run: same per reed as 50 and 100 |
CandleMakingSuppliesIndia sells the three oils, bases, reeds and bottles named here. This page still tells you to test before buying our bulk packs, that our 1 kg Jasmine costs more than two 500 g packs, that a cheaper base of your own may be the better buy, and that another supplier’s jasmine is fair game if it wins.
Every CSI price was checked on the live store on 7 October 2026, with stock checked per size; every item offered here is in stock on that date. Page wording is quoted and attributed.
Fragrance behaviour is described as general tendencies, never as the composition of a CSI oil; no flash point, density or evaporation figure is given. The approved loads, 3% allowance, 1.0 g/ml density, 12 October start date and the lavender failure are worked examples; the sniff scale, spacing and decision rule are in-house methods. For bulk pricing, GST invoicing, and MSDS and IFRA documentation on request, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Made a Jasmine Reed Diffuser with 20% Fragrance Oil and Six Fibre Reeds, but the Room Has Almost No Smell — What Should I Test First?
- I Made a Rose Reed Diffuser with 25% Fragrance Oil, but the Liquid Turned Cloudy — Should I Test a Lower Load or Different Rose Oil?
- My Lavender Reed Diffuser Smells Strong Initially but Becomes Weak After Ten Days — Should I Investigate the Fragrance Composition or Reed Performance?
- My Lavender Fragrance Oil Works Well at 15%, but Jasmine Is Weak at 20% — Should I Choose a Different Jasmine Accord Instead of Increasing the Load?
- I Made a Floral Reed Diffuser with 30% Fragrance Oil, but It Doesn’t Smell Stronger Than My 20% Version — Could the Higher Load Be Reducing Wicking?
- My Mogra Reed Diffuser Develops Sediment After a Week — Should I Investigate the Fragrance Oil’s Compatibility with the Carrier?
- I Have Two Jasmine Fragrance Oils from Different Suppliers — How Do I Compare Their Throw, Clarity, Wicking and Stability in a 100 g Trial?
- How Do I Make Strong Floral Reed Diffusers with Jasmine, Mogra, Rose, Lavender and Tuberose Without Assuming One Base and Fragrance Percentage Will Work for Every Oil?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — British Rose Fragrance Oil, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Jasmine Fragrance Oil, Lavender Fragrance Oil, Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml). They are general product reviews, not assessments of the reed-diffuser fragrance advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Priyanka Purohit, Sooraj R, snehal Chaudhary, Akansha. The reviews from Emma Bechara, S.A. are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.
Figures verified 7 October 2026, CSI live pricing: Jasmine Fragrance Oil 15 gm ₹103.00, 50 gm ₹230.00, 100 gm ₹430.00, 500 gm ₹1,961.00, 1 kg ₹3,923.00 (₹3.92 a gram at 500 g and 1 kg); British Rose Fragrance Oil 15 gm ₹94.40, 50 gm ₹212.40, 100 gm ₹342.20, 500 gm ₹1,593.00 (₹3.19 a gram), 1 kg ₹3,068.00 (₹3.07 a gram); Lavender Fragrance Oil 15 gm ₹105.02, 50 gm ₹270.00, 100 gm ₹540.00 (₹5.40 a gram at 50 g and 100 g), 500 gm ₹2,620.00, 1 kg ₹5,221.00; Lift Base and Softness Base 500 ml ₹1,099.00 each (₹2.20 a ml); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed); Gold Reed Diffuser Bottle Pack of 10, 120 ML ₹1,062.00 (₹106.20 each). Per unit = pack price ÷ units; per ml = price ÷ 500 because the base pages state no density. Totals exclude labour, freight, packaging and GST.
Non-price figures: 100 of each fragrance is the reader’s (title). The 100 g fill, six reeds, 15% and 20% screen loads, 3 bottles per arm and 21 days are this page’s test design within the series defaults. The approved loads (20% jasmine, 15% rose and lavender), 3% allowance, 1.0 g/ml density, the 12 October 2026 start date and lavender as the failing oil are worked examples. The sniff scale, spacing and decision rule are in-house methods, not CSI test data. "10-30%", "24-48 hours" and every quoted line are CSI page wording. Diwali (8 November 2026) and Christmas (25 December 2026) are calendar facts.