I Want to Replace Part of the DPG in My Reed Diffuser Formula — Should I Test DPM, an Augeo-Type Solvent or a Commercial Ready-Made Base?

I Want to Replace Part of the DPG in My Reed Diffuser Formula — Should I Test DPM, an Augeo-Type Solvent or a Commercial Ready-Made Base?

 

Pure Performance 100g ₹325.00 Lift 500 ml ₹1,099.00 · Longevity ₹1,296.00 Fibre reeds ₹8.00 a reed from 50
Replacing part of the DPG
Test DPM and an Augeo-type solvent at the same swap beside one CSI base, three bottles each.
★★★★★
"Fragrance is great but May be my formula for reed diffuser is 60% dpg 20% isopropyl myristate 10% perfume oil and 10% ethanol perfume grade. But throw of scent is low. Can you fix this formula."
Pradeep Kumar DahiyaVerified buyer · May 2026
Solar Bloom Fragrance Oil
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
★★★★★
"Nice product"
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML)
★★★★☆
"I just tried it out , it's absolutely stunning. Super easy to use and such a life saver."
ThenirvaofficialVerified buyer · Mar 2026
Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g)
★★★★★
"The products are great and of premium quality. I am a permanent customer and will be … but the delivery charges are very high which is restricting me to purchase more…"
Manasa GNVerified buyer · Feb 2025
Premium Coconut Soy Wax
★★★★☆
"Your products are real money valued and genuine, enhanced the candle making experience."
T.S.May 2024
Complete Candle Making Course Kit for Beginners
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. They are general reviews of the products named on each card, not assessments of the advice set out below. Wording is unedited.
✓ Prices verified 7 October 2026, stock checked per variant ✓ GST invoice; MSDS and IFRA documentation for oils on request ✓ CSI does not sell DPG, DPM or Augeo-type solvents, and says so
CSI Reed Diffusers · DPG
DPM and Augeo-type solvents keep your DPG and your formula; a ready-made base replaces both. Choose what to test on paperwork, odour, cost and effort, and choose what to keep only on a same-oil, same-reed, three-bottle test.
56 g + 24 g
DPG kept + co-solvent per 100 g bottle in the swap arms · CSI side (arm D + reeds) from ₹1,611.00, CSI live pricing, October 2026
Quick answers — read this first
I want to replace part of the DPG in my reed diffuser. Should I test DPM, an Augeo-type solvent or a ready-made base? Test two of them, or all three. They answer different questions. DPM and an Augeo-type solvent let you keep most of your DPG and your own formula; a ready-made base replaces the DPG entirely with a liquid someone else designed.

How do I choose which to test first? On what you can actually get with an SDS, its odour neat, your cost per bottle and the effort to qualify it. Throw you can only learn from a test. The matrix below is judgement, not performance data.

What does the test look like? Oil fixed at 20 g per 100 g. A: your DPG formula; B: 56 g DPG + 24 g DPM; C: 56 g DPG + 24 g Augeo-type; D: 80 g of a CSI base. Three bottles each, weighed every 2–3 days for 14–30 days, blind sniffs.

What does CSI sell? Only arm D. We don't sell DPG, DPM or Augeo-type solvents. With your own bottles, the CSI side is ₹1,611.00 (three Pure Performance 100g and 75 fibre reeds).
The short answer
DPM: a glycol ether that is generally more volatile and lower in viscosity than DPG. Keep 70% of your DPG and replace 30% of the carrier. Check its odour and SDS.
Augeo-type: glycerol-ketal solvents marketed for diffusers (Augeo is another company's trademark). Same 30% swap, same checks. Sourcing and paperwork vary by supplier.
Ready-made base: a replacement for all of the DPG, not part of it. Simplest to run, least control. CSI pages publish no composition or SDS; ask us.
The rule (yours): the arm that beats your formula on blind sniffs and lands in your life band with all three bottles, stays clear warm and cool, and passes your SDS and label review. If two pass, keep the cheaper and more documented one.
Three ways to replace part of the DPG, side by side Judgement on availability, paperwork and effort, not performance data. Throw is the test's job. DPM Augeo-type CSI ready-made Who sells it your chemical supplier your chemical supplier CSI, in stock Documents ask supplier: SDS, TDS ask supplier: SDS, TDS page: none; ask CSI Odour alone sniff neat on a strip sniff neat on a strip sniff neat on a strip Flammability read its SDS read its SDS ask; not on page Cost per bottle 24 g × your price 24 g × your price ₹175.84 (80 ml) Effort to qualify blend + stability blend + stability one liquid, black box Control you set the ratio you set the ratio CSI sets it Uses your DPG yes, 70% kept yes, 70% kept no: replaces it all Not on the list: IPM (oily, slow: tends to slow release further) and ethanol (fast, flammable, gone first). Only the third column is something CSI sells. Augeo is a trademark of another company.
Decision matrix: judgement on availability, documents, odour, flammability, cost, effort and control, not performance data. Arms B and C keep 56 g of DPG and add 24 g of co-solvent per 100 g bottle, so their cost is your own price per gram × 24 g plus 56 g of your DPG; we don't quote market prices for solvents we don't sell. The CSI base cost is 80 ml at the 500 ML price (₹2.20 a ml), treated as 80 g only if your weighed density is near 1.0 g/ml.
Straight answer
I want to replace part of the DPG in my reed diffuser formula. Should I test DPM, an Augeo-type solvent or a commercial ready-made base?
If you can source them with an SDS, test DPM and an Augeo-type solvent as partial replacements, and add one ready-made base as an outside reference. DPM and Augeo-type solvents keep your formula yours: you keep 70% of the DPG, swap 30% of the carrier (24 g in an 80 g carrier) and control the ratio, the sourcing and the paperwork. A ready-made base isn't a partial replacement. It replaces all the DPG with a liquid whose composition you may not know; CSI's base pages publish none. It is the simplest arm to run and the one you control least. Choose what to test on availability, documentation, odour, flammability, cost per bottle and effort to qualify. Choose what to keep only on the test: same oil at 20 g per 100 g, same reeds, bottles and room, three bottles per arm, weighed for 14–30 days, blind sniffs and warm/cool stability. Read each solvent's SDS before mixing. Only the ready-made arm is something CSI sells, and it is a comparison, not a promised fix.
One line: DPM and Augeo-type keep your DPG and your control; a ready-made base replaces both. Test 56 g DPG + 24 g of each against your formula and one CSI base, three bottles each, and keep what wins with paperwork.
Arm D, priced: Pure Performance 100g × 3 ₹975.00 + fibre reeds 50 + 25 ₹636.00 = ₹1,611.00 with your own bottles; ₹3,735.00 with two Gold 120 ML packs. Your DPG, DPM and Augeo-type solvent come from your own suppliers. In stock on 7 October 2026.
Pure Performance 100g — ₹325.00

Three routes that answer different questions

A partial swap asks "what should sit beside my DPG?". A ready-made base asks "should I stop making my own carrier?".

Your situation, restated: you have a reed diffuser formula built on DPG, and you want to replace part of the DPG to improve how it performs, most often to lift weak throw. You haven't given the formula, so this page uses a labelled worked example: 20 g oil + 80 g DPG per 100 g, a 120 ml Gold bottle, 5 fibre reeds. "Part" here means 30% of the carrier: 56 g DPG stays, 24 g of a co-solvent goes in, which is 24% of the whole bottle.

DPM (dipropylene glycol methyl ether) is a glycol ether that is generally more volatile and lower in viscosity than DPG. That is why it is a common partner: it speeds release and thins the liquid. Augeo-type solvents are glycerol-ketal solvents marketed for diffusers and fragrance work. Augeo is a brand name of another company, Solvay, so we say "Augeo-type". CSI sells neither, and we quote no flash points, viscosities or evaporation rates for any of them; your supplier's SDS and TDS are the source. A ready-made base is a finished carrier sold for diffusers. CSI sells several, and their pages say "Blend with 10-30% fragrance oil". They are designed to be used as sold.

That last point changes the question. Mixing your DPG into a ready-made base of unpublished composition makes a third liquid that nobody has documented, not even the base's maker. So in this test the ready-made arm replaces all the DPG. If you want part-replacement, DPM and Augeo-type solvents are the candidates. The base answers a different question: is my own carrier worth the effort at all?

Why not IPM or more ethanol?
One real customer formula, left as a review on our Solar Bloom page by Pradeep Kumar Dahiya and quoted word for word: "Fragrance is great but May be my formula for reed diffuser is 60% dpg 20% isopropyl myristate 10% perfume oil and 10% ethanol perfume grade. But throw of scent is low. Can you fix this formula." In that formula 80% of the bottle is DPG plus IPM. IPM (isopropyl myristate) is an oily, very low-volatility ester: it dissolves many fragrance materials but tends to slow evaporation further, so it is rarely a good partner when throw is the problem. Ethanol is fast, but it leaves first and raises flammability, so throw comes as an early burst and then fades. Neither is on this page's shortlist for replacing DPG. IPM questions are the IPM cluster; the IPM-only post covers it as a sole carrier.

The decision matrix, row by row

You can't test what you can't buy with a document. Start there.
Decision matrix · what to test first
Judgement, not performance data · your suppliers and prices fill the blanks
Criterion DPM Augeo-type CSI ready-made base
Availability From chemical or fragrance-material suppliers; pack sizes vary Fewer suppliers; check it is the grade sold for fragrance use In stock at CSI on 7 October 2026: 100g sample and 500 ml
Documentation Ask for SDS and TDS before buying Ask for SDS and TDS before buying Pages publish no composition, density, flash point or SDS; ask us on WhatsApp what we can obtain
Odour Sniff neat on a strip at 10 min and 1 h Same Same
Flammability and label From its SDS; changes the mixture's classification From its SDS; same Not on the page; ask, then review your label
Cost per 100 g bottle 56 g DPG + 24 g DPM at your prices 56 g DPG + 24 g Augeo-type at your prices About ₹175.84 (80 ml at 500 ML price); ₹260.00 at the 100g price
Effort to qualify Blend, clarity with each oil, stability, SDS review Same One liquid; stability with each oil; fewer moving parts
Control and repeatability You set the ratio; lot changes are yours to track Same CSI sets the composition; CSI publishes no lot or reformulation notices
Your existing DPG Keeps 70% in use Keeps 70% in use Not used

Three practical readings. If you can get only one documented solvent, test that one. A partial swap with paperwork beats a theoretically better solvent you can't document. If you can't get either with an SDS, the ready-made route may be the honest one, but ask what technical data comes with the base too, including ours. If cost per bottle dominates, a DPG-majority blend will usually be cheaper than a ready-made base, because most of the liquid is your existing DPG. Put your own prices into the cost row before you assume otherwise.

Argued against our own interest: the matrix favours arms B and C on cost and control. If one of them wins your test, keep it: we don't sell DPG, DPM or Augeo-type solvents, and we won't pretend our base always outperforms a well-built blend. No base always outperforms another. What a ready-made base offers is fewer variables, and that is worth something only if it also wins on throw for your oils.

The cause table: what a replacement can and can't fix

Swapping the carrier fixes carrier problems. Check the problem is the carrier first.

Before you buy a co-solvent, make sure the weak throw is a carrier problem. Rows are grouped, not ranked; the evidence column is what you would commonly see, not CSI test data.

Cause table · weak DPG diffuser, replacement planned
Cause → what you would see → discriminating check → fix · tendencies, not certainties
Cause What you would see Discriminating check Fix
Carrier volatility (DPG) Long life, weak room scent, wet reeds Any faster arm beats A on weight loss and sniffs Partial replacement (B, C) or a ready-made base (D)
Carrier viscosity Tips stay dry for hours Wet-front timing on white reeds (8309) A lower-viscosity partner; DPM is generally thinner than DPG
New solvent's own odour A sharp or chemical note under the fragrance Sniff each co-solvent neat on a strip at 10 min and 1 h Drop that solvent; try the other
Solubility / stability Haze or layers in the new blend Clear jar at room, warm and cool for 2–4 weeks Lower the swap, change solvent, or lower oil %
Fragrance load and character Weak in every arm, D included Same arms with a second, lighter oil The oil, not the carrier
Reeds and bottle All arms weak; old reeds or jammed neck Fresh reeds from one pack; one bottle type Hold constant; fix first
Room and climate Results flip between weeks Log temperature; all arms side by side Test in the room the product lives in
Process Blends made by volume; no rest Remake by weight, rest 24–48 h Weigh, stir until clear, rest
Measurement error Choice made on day-2 sniffs Weight log every 2–3 days; blind sniffs days 7–28 Decide at day 30

If reeds, bottle, room and process are already held steady (the usual pattern after the cluster hub’s first test), the carrier rows are the likely ones, and this test addresses them directly. If the tips stay dry for hours, measure rise first with the viscosity post.

The test: three candidates and your control

Same oil, same swap size, one variable per arm.

Fix the oil (same bottle of oil, 20 g per 100 g), the reed pack and count, the 120 ml bottle and the room. Make the swap the same size in both solvent arms, so you compare solvents, not doses. The full scoring protocol for a three-way comparison is the three-arm comparison post; what to measure specifically for DPM is the DPM measurement post. Here is the design.

Four arms × three bottles · one 300 g master per arm
Masters for B and C: 60 g oil + 168 g DPG + 72 g co-solvent
Arm Per 100 g bottle Source What it answers
A · control 20 g oil + 80 g DPG Yours Your formula, measured
B · DPM 20 g oil + 56 g DPG + 24 g DPM Your supplier Does a faster, thinner partner lift throw?
C · Augeo-type 20 g oil + 56 g DPG + 24 g Augeo-type Your supplier Same question, different solvent family
D · CSI base 20 g oil + 80 g Pure Performance (or Lift / Longevity by oil family) CSI Is a finished base better than your own carrier?

Totals: 12 bottles, 240 g of your oil, 576 g of DPG, 72 g each of DPM and the Augeo-type solvent, 240 g of base and 60 reeds. If you can source only one solvent, drop that arm and run three.

1
Paperwork and sniff before mixingRead both co-solvent SDSs (hazards, handling, storage, transport). Sniff each solvent neat on a paper strip at 10 minutes and 1 hour, and the CSI base too. A solvent you can smell under your fragrance fails here.
2
Clarity jarsIn small clear jars, make 20 g of each arm's liquid with your oil: 4 g oil + the carrier in the same proportions. Check at 1 hour and 24 hours, then keep one set warm and one cool (labelled) for 2–4 weeks.
3
Masters by weight, restedOne 300 g master per arm: carriers first, then oil, stir until clear, same time for each. Rest 24–48 hours covered; the CSI base pages ask for this before bottling.
4
Fill, reed, weigh day 0Three bottles per arm, 100 g each by weight, 5 fresh reeds from one pack. Weigh each assembled diffuser; code bottles 1–12.
5
Weigh and sniff on a scheduleWeigh every 2–3 days at the same time; log temperature. Blind sniffs on days 7, 14, 21 and 28: a helper places one coded bottle at a time in a closed room; score at the door and at 1 m, 0–5.
6
Decide at day 30Rates settle after the first week. Use the full run; check the late-life scent of the winner by letting it run on.
Your decision rule (in-house, labelled)
(1) Throw: beats A on at least three of four blind sniff days. (2) Life: all three bottles' projected life (usable fill ÷ g/day) inside the band you sell, each within about ±20% of the arm average. (3) Stability: clear at room, warm and cool for 2–4 weeks with your oil. (4) Paperwork: SDS in hand and a label you can write. (5) Tie-break: if B and C both pass, keep the cheaper, better-documented one; if a solvent arm and D tie, keep the solvent arm, because it is yours. Thresholds are suggestions; set your own.
Don't do this: test DPM at 30% against an Augeo-type solvent at 50% and a base, then pick the "strongest". Different swap sizes make the solvent comparison meaningless. And don't judge on day 2, when the reeds are still saturating. Same swap, same oil, 30 days.

After the test: choosing, safety and the purchase step

The winner still has to pass the label. Then you buy for it.

Safety, plainly. Replacing part of a slow, low-odour solvent with a faster one can change the flammability and hazard classification of the finished liquid. The classification depends on the whole formula, fragrance oil included. Read every SDS, keep stock solvents closed and away from heat and flames, mix in a ventilated room with gloves and eye protection, and keep finished diffusers away from candles and heaters and out of reach of children and pets. Tell customers to avoid skin and eye contact and to wipe spills from polished surfaces. CSI shares MSDS and IFRA documentation for its fragrance oils on request; for our bases, ask what we can obtain. Labelling rules depend on where you sell; this is not legal advice.

If this arm wins · what you buy next
Worked example: 100 bottles at 100 g, 5 reeds each · costs exclude oil, labour, freight, packaging and GST
Winner From your suppliers From CSI CSI total
B · DPM 5,600 g DPG + 2,400 g DPM 500 reeds (5 × 100) ₹4,000.00, ten Gold 120 ML packs ₹10,620.00 ₹14,620.00 (₹146.20 a bottle)
C · Augeo-type 5,600 g DPG + 2,400 g Augeo-type Same reeds and bottles ₹14,620.00 (₹146.20 a bottle)
D · CSI base Oil only 8,000 g base: sixteen 500 ML ₹17,584.00 at about 1.0 g/ml; reeds and bottles as above ₹32,204.00 (₹322.04 a bottle)
None beats A Nothing new Nothing new Look at oil, reeds and room

Weigh 100 ml of any base before you size an order: CSI sells by volume and publishes no density. Before the full run, make the first production batch and weigh three bottles for two weeks against your test numbers. A new lot of DPM or an Augeo-type solvent deserves the same check. For larger base quantities, see whether to buy 1 kg, 5 kg or 25 kg of base when starting; CSI lists no 25 kg pack, so ask on WhatsApp. When you write to any supplier, the request list (composition class, density, SDS, recommended load, lot information) is the specification post.

Diwali is 8 November 2026. Sourcing two solvents with paperwork, a 24–48 hour rest and a 30-day test leaves little room before festive dispatch. If it won't fit, ship your current formula honestly and switch after the test, or narrow to the one arm you can source today. Message us your counts for reeds, bottles or base to confirm stock and dispatch, with a GST invoice.
WhatsApp a festive stock check

What to buy for this test, and what to skip

Chosen on page statements, price and stock on 7 October 2026, not performance data. CSI publishes none for its bases or reeds. Pick one base for arm D. Each card says when not to buy.

1
ready-made base · arm D, the neutral choice
Pure Performance Reed Base Oil (100g / 500 ML)
The only one of the three candidates CSI sells. Lift's page describes Pure Performance as "a neutral, no-additive base designed for full-spectrum fragrance compatibility"; its own page claims "smooth even wicking" and "No added fixatives" and says "Blend with 10-30% fragrance oil". No composition, density, flash point or SDS is published in the text we captured, so we can't say whether it contains DPG, DPM, an Augeo-type solvent or anything else. Argued against our own interest: per bottle it costs more than your own blend is likely to. If arm B or C wins, keep it and buy only reeds and bottles from us.
Size Price Unit price For this test
100g ₹325.00 ₹3.25 a gram arm D: 240 g = three packs (₹975.00); ₹260.00 a bottle at this size
500 ML ₹1,099.00 ₹2.20 a ml about ₹175.84 a bottle (80 ml); only after arm D passes
Arm D: ₹975.00. Buy 100g — ₹325.00
2
ready-made base · arm D for floral and fresh oils
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
If your oil is floral, citrus, green or fruity, Lift's page positions it for those families and talks about oils that "bloom, diffuse further". Use it instead of Pure Performance as arm D, not as a fifth arm. Page positioning, not a test result; no composition or SDS published. Limitation: 500 ml only, about twice what arm D needs.
Size Price Per ml For this test
500 ml ₹1,099.00 ₹2.20 a ml arm D for floral, citrus, green, fruity oils; ₹124.00 more than three PP 100g, with about 260 ml left
One base per test. Buy Lift — ₹1,099.00
3
ready-made base · arm D for woody and oriental oils
Longevity Base – Professional Grade Reed & Car Diffuser Base (500 ml)
For oud, sandalwood, amber or resinous oils, Longevity's page claims fit ("oriental, woody, resinous, and balsamic") and "long-lasting cold scent diffusion". If you are replacing DPG because throw is weak, notice that "long-lasting" points towards slower release; it has to earn its place in your test. Limitation: the dearest base per ml here.
Size Price Per ml For this test
500 ml ₹1,296.00 ₹2.59 a ml arm D for woody, oriental, resinous oils; about ₹207.36 a bottle (80 ml)
4
fibre reeds · identical across arms
Fiber Diffuser Reeds (Black)
Same pack, same count (5) in every bottle, so reeds cancel out of the comparison. 20.3 cm long, no diameter stated; the page's "no swelling, no clogging" is a claim, not a result. CSI sells fibre reeds, not rattan. Limitation: flat ₹8.00 a reed from 50 up.
Pack Price Per reed For this test
Pack of 25 ₹236.00 ₹9.44 with the 50: 75 reeds
Pack of 50 ₹400.00 ₹8.00 60 reeds for 12 bottles (₹636.00)
Pack of 100 ₹800.00 ₹8.00 production
Pack of 500 ₹4,000.00 ₹8.00 same per reed as 50: no saving
60 reeds: ₹636.00. Buy 50 — ₹400.00
5
tool · masters by weight
Silicon Measuring Beaker 250 ML
Arms B and C are 60 g oil + 168 g DPG + 72 g co-solvent per 300 g master: weigh them, don't pour to marks. The page lists "reed diffuser making" among its uses. Limitation: one beaker per solvent arm, or wash and dry thoroughly: DPM residue in the Augeo-type arm is a contamination you then measure.
Listing Price — Use
250 ML ₹600.00 — one 300 g master per arm, by weight
100 ML (separate listing) ₹300.00 — odour and clarity jars
With the kit: ₹2,211.00. Buy 250 ML — ₹600.00

Skip for now: Depth and Softness as arm D for a weak-throw problem (Depth's page says "Slows evaporation"; Softness's page describes a gentle presence); more than one CSI base in the same test; the CSI HyperDiffusion Base™, out of stock on 7 October 2026; and the Isopropyl Alcohol Spray CSI sells, which is a cleaning product and never a substitute for perfumer's alcohol or a diffuser co-solvent.

The CSI principle
Choose what to test on paperwork and practicality. Choose what to keep on the test.
Replacing part of the DPG: DPM or an Augeo-type solvent at the same 30% swap (56 g DPG + 24 g), against your formula and one CSI base, three bottles each, 30 days. Only arm D is ours: ₹1,611.00 with your own bottles.
"A partial swap keeps the formula yours. A ready-made base hands it to someone else. Both are fine, if you choose on purpose."
— CandleMakingSuppliesIndia
Why trust this guide

CandleMakingSuppliesIndia sells the bases, fibre reeds, bottles and beakers named here. It does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol, and this page says so in the matrix itself. Our base pages publish no composition, density, flash point or SDS in the text we captured, so we can't tell you what solvent our bases contain, and we don't.

Every CSI price was checked on 7 October 2026, with stock checked per variant; everything priced here is in stock on that date, and the CSI HyperDiffusion Base™ is out of stock and not offered. Page wording is quoted and attributed; the review is quoted verbatim.

The matrix is judgement, not performance data; the swap size, arms, bottle counts and thresholds are labelled worked examples. Solvent descriptions are general tendencies with no numeric flash points, viscosities or evaporation rates. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.

Frequently asked questions

Is DPM better than DPG for reed diffusers?
Not automatically. DPM is generally more volatile and lower in viscosity than DPG, so it tends to speed release; whether that improves throw at a life you can sell depends on your oil. Test it as a partial swap against plain DPG.
What is an Augeo-type reed diffuser base?
A diffuser carrier based on glycerol-ketal solvents. Augeo is a trademark of another company, so "Augeo-type" describes the class. Ask your supplier for the SDS and TDS, and test it like any other carrier.
How much DPG should I replace with DPM?
Start with a fixed, moderate swap, for example 30% of the carrier (24 g in an 80 g carrier), with the oil unchanged. Finer ratio steps are a separate structured trial.
Can I mix DPG with a ready-made reed diffuser base?
You can, but you create an undocumented blend: most ready-made bases, including CSI's, publish no composition. Use a ready-made base as sold, as a whole replacement, and compare it with your own blend.
Does CSI sell DPM or Augeo-type solvents?
No. CSI sells ready-made reed diffuser bases (Pure Performance, Lift, Longevity, Depth, Softness), fibre reeds, bottles and fragrance oils. Our base pages do not publish composition; ask on WhatsApp for any technical data we can obtain.
Is IPM good for improving reed diffuser throw?
Usually not. IPM is an oily, very low-volatility ester that tends to slow evaporation further. It dissolves many fragrance materials, but it is rarely a good partner when weak throw is the problem.
Replacing part of the DPG
Test DPM and an Augeo-type solvent at the same swap, with one CSI base as the outside reference.
Only arm D is ours: ₹1,611.00 with your own bottles for three Pure Performance 100g and 75 fibre reeds. If a solvent arm wins, keep it and buy only reeds and bottles from us.
Shop Pure Performance 100g Check test-kit stock on WhatsApp
Editorial standards & sources
About this guide: part of CSI's cluster "DPG Reed Diffusers That Aren't Working" (8301–8320). It owns the choice of what to test when replacing part of the DPG: the decision matrix (availability, documentation, odour, flammability, cost, effort, control), why a ready-made base is a whole replacement, why IPM and ethanol are left off, and a three-candidate test design with a control. DPM measurement detail is 8322; the full three-arm protocol is 8328.

Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Complete Candle Making Course Kit for Beginners, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Premium Coconut Soy Wax, Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g), Solar Bloom Fragrance Oil. They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Pradeep Kumar Dahiya, Sooraj R, snehal Chaudhary, Thenirvaofficial, Manasa GN. The reviews from T.S. are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.

Figures verified 7 October 2026, CSI live pricing: Pure Performance Reed Base Oil 100g ₹325.00 (₹3.25 a gram), 500 ML ₹1,099.00 (₹2.20 a ml); Lift Base 500 ml ₹1,099.00; Longevity Base 500 ml ₹1,296.00 (₹2.59 a ml); Depth and Softness Base 500 ml ₹1,099.00; CSI HyperDiffusion Base™ ₹1,499.00 (out of stock); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed from 50 up); Gold Reed Diffuser Bottle Pack of 10, 120 ML ₹1,062.00 (₹106.20 each); Silicon Measuring Beaker 250 ML ₹600.00, 100 ML ₹300.00; Isopropyl Alcohol Spray 150 ML ₹383.00 (a cleaner, named only to rule it out). Per unit = pack price ÷ units, two decimals. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol.

Non-price figures: "replace part of the DPG", "DPM", "Augeo-type" and "ready-made base" are the reader's (title). The 20 g oil per 100 g, the 30% swap (56 g + 24 g), 5 reeds, arm and bottle counts and decision thresholds are labelled worked examples. The matrix is judgement, not test data. Review 85 is quoted verbatim; its percentages are the reviewer's. Solvent descriptions are general tendencies; no flash point, viscosity, density or evaporation figure is quoted. Augeo is a trademark of Solvay. "Blend with 10-30% fragrance oil", "neutral, no-additive base", "Slows evaporation" and the 24–48 hour rest are page wording. Base cost per bottle treats 80 ml as 80 g only at a weighed density near 1.0 g/ml. Costs exclude labour, freight, packaging and GST. Diwali 8 November 2026 is a calendar fact.
Back to blog