Can I Use IPM as the Only Carrier in a Reed Diffuser, or Should I Compare It Against Bases Specifically Designed for Passive Diffusion?

Can I Use IPM as the Only Carrier in a Reed Diffuser, or Should I Compare It Against Bases Specifically Designed for Passive Diffusion?

 

Pure Performance 500 ML ₹1,099.00 Citrus Lemon 100 gm ₹300.00 Fibre reeds from ₹8.00 a reed
IPM alone · or a base
Find out whether IPM earns a place in your diffuser before you build a product around it.
★★★★★
"Quality is good with good fragrance"
Avanthi CheeliVerified buyer · Nov 2025
Citrus Lemon Fragrance Oil
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
★★★★★
"Nice product"
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML)
★★★★☆
"I just tried it out , it's absolutely stunning. Super easy to use and such a life saver."
ThenirvaofficialVerified buyer · Mar 2026
Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g)
★★★★★
"Good fragrance 👍"
Sooraj RVerified buyer · Aug 2026
Blue Ocean Fragrance Oil
★★★★★
"The products are great and of premium quality. I am a permanent customer and will be … but the delivery charges are very high which is restricting me to purchase more…"
Manasa GNVerified buyer · Feb 2025
Premium Coconut Soy Wax
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. They are general reviews of the products named on each card, not assessments of the advice set out below. Wording is unedited.
✓ Prices verified 7 October 2026, stock checked per variant ✓ GST invoice; MSDS and IFRA documentation for oils on request ✓ CSI does not sell IPM, and says so
CSI Reed Diffusers · IPM
IPM dissolves fragrance well and then tends to keep it. Put an IPM-only formula beside a base sold for passive diffusion, add a minor-IPM arm, and let three bottles per arm decide what role IPM keeps.
₹2,335.00
CSI side of the three-arm IPM test, with your own bottles · CSI live pricing, October 2026
Quick answers — read this first
Can I use IPM as the only carrier in a reed diffuser? You can mix one, but it is rarely a good product. IPM (isopropyl myristate) is an oily ester with very low volatility: it tends to dissolve your fragrance well and then hold it in the bottle and on the reed, so the room stays faint. Treat IPM alone as a hypothesis to test, not a formula to sell.

Should I compare it against a base designed for passive diffusion? Yes. Run your IPM-only formula (20 g oil + 80 g IPM) beside the same oil in a ready-made reed base, and beside the base with a minor IPM share (10 g IPM + 70 g base). Three bottles per arm, weighed every 2–3 days for 14–30 days, blind sniffs on fixed days.

When does IPM belong in the formula at all? Only as a minor modifier, and only if the modifier arm matches or beats the base arm on your own rule. If it doesn't earn its place, leave it out.

What does CSI supply? Not IPM. For the test: a base arm, a light test oil and fibre reeds, ₹2,335.00 with your own bottles.
The short answer
IPM alone: possible, rarely good. It tends to slow release and can leave reeds greasy; a tendency your test confirms or overturns.
Compare: three arms, same oil at 20%: A IPM only, B a passive-diffusion base, C the base with 10% IPM. Three bottles each.
Measure: grams a day by weight, blind sniff scores at the door and at 1 m, clarity, and reed tips after a day-14 fresh-reed swap.
Your rule: written before mixing and labelled as yours; IPM stays only if arm C matches or beats arm B.
Three jobs of a reed carrier, and IPM alone Where an IPM-only formula tends to struggle, and the bench check for each job 1 2 3 100 g fill · 6 fibre reeds 1 · Dissolve, and stay dissolved IPM alone: dissolves many fragrance materials, so clarity is often not the first problem. Check: jar test, room and cool, 7 days. 2 · Climb the reed IPM is oily: reeds can feel greasy and tips can collect residue with some oils. Check: reed rise in 24 h; tips at day 14. 3 · Leave the tip at a useful rate IPM is very low in volatility: it tends to stay behind and slow the fragrance with it. Check: grams a day against a base, by weight. Job 3 is where IPM-only formulas usually fail. Solvency is not release. General tendencies, hedged; not CSI test data. IPM figures come from your supplier's SDS and TDS. CSI does not sell IPM.
A reed carrier has three jobs: keep the fragrance dissolved, climb the reed, and leave the tip at a useful rate. IPM alone often does the first well; the third is where it tends to fail, because it is very low in volatility. Each panel names the bench check that settles it for your oil. Tendencies, not CSI test data.
Straight answer
Can I use IPM as the only carrier in a reed diffuser, or should I compare it against bases specifically designed for passive diffusion?
Compare it, and expect the base to win, but let three bottles per arm decide. Your formula, as the question frames it: IPM as the only carrier, which in this series' default is 20 g fragrance oil + 80 g IPM per 100 g (20% oil, 80% IPM), in a 120 ml bottle with 6 fibre reeds. In tendency terms, which your IPM supplier's documents should confirm, IPM is an oily, very low-volatility ester. It dissolves many fragrance materials, so the bottle can look perfect, but on a reed it tends to stay put and slow the release of the fragrance it carries. Makers who try it alone commonly report long life, a faint room and greasy reed tips. A ready-made base sold for passive diffusion is the fair comparison, because it is what your customer's alternative diffuser probably uses. Run three arms with the same oil: A IPM only, B a base alone, C the base with 10 g IPM in place of 10 g of base. Weigh every 2–3 days, sniff blind on days 7, 14, 21 and 28, swap fresh reeds into one bottle per arm on day 14, and judge on a rule you wrote first. Use IPM only as a minor modifier, and only if arm C matches or beats arm B. CSI doesn't sell IPM; if your IPM arm wins, keep it.
One line: IPM alone is a test arm, not a product; compare it with a passive-diffusion base and a base-plus-10%-IPM arm, three bottles each, by weight, for 14–30 days.
The CSI side of the three-arm test: Citrus Lemon 100 gm ×2 ₹600.00 + Pure Performance 500 ML ₹1,099.00 + fibre reeds 50 + 25 ₹636.00 = ₹2,335.00 with your own bottles; ₹3,397.00 with a Gold 120 ML pack of 10. All in stock on 7 October 2026.
Pure Performance — from ₹325.00

Your IPM-only formula, and what each job asks of it

A clear bottle proves the oil dissolved. It doesn't prove the oil will leave.

Your question gives no figures, so we use the series default and hold it constant throughout: 20 g fragrance oil + 80 g IPM per 100 g, mixed by weight, in a 120 ml Gold bottle filled with a labelled 100 g, 6 black fibre reeds of 20.3 cm, a closed bedroom as the test room. If your own formula differs, say 25 g oil + 75 g IPM, substitute your numbers everywhere; the logic doesn't change. The oil for the worked example is Citrus Lemon, chosen because a light, top-heavy oil exposes a slow carrier fastest.

A passive reed diffuser asks three jobs of its carrier, and the diagram above sets them side by side. Job one: dissolve the fragrance and keep it dissolved at room temperature and in a cool night. Job two: be thin enough to climb the reed by capillary action, steadily, for weeks. Job three: be volatile enough to carry fragrance off the reed tips into the room, without emptying the bottle long before the life you sell.

IPM's reputation comes from job one. It is a common oily, low-odour solvent in cosmetics and perfumery, and it dissolves many fragrance materials. That is why an IPM-only diffuser often looks right in the bottle. The trouble is job three: as a very low-volatility ester, it tends to stay on the reed, and the fragrance it holds leaves with it slowly. Job two sits in between; IPM is oily, and with some oils the reed tips can turn greasy or collect residue over time. These are general tendencies, hedged; the figures for your lot are in your supplier's SDS and technical data sheet, and we quote no viscosities or evaporation rates here.

Where this page sits in the cluster
Whether IPM is compatible with a given oil at all, and how to read clarity, wicking time and residue, is the IPM compatibility post. If you have already mixed IPM with a floral and the room is faint, the IPM-and-floral post shows why you investigate volatility before raising the load. This page answers one question: alone, or compared with a base, and what role IPM keeps after the comparison. The cluster's short answer on DPG, DPM and IPM is the cluster hub.

The typical IPM-only problems, hedged

Long life, faint room, greasy tips: the three complaints arrive together.

What follows is what makers commonly report with IPM as the only carrier, not CSI test data. Each is a tendency your test either confirms or overturns for your oil, reeds and room.

1. Slow evaporation that looks like value

The bottle lasts and lasts. At first that looks like a selling point, until you notice the level is barely moving because very little is leaving the reeds, fragrance included. A diffuser that loses half a gram a day from a 100 g fill would run for months; if the room is faint for all of them, the long life is not a benefit, it is the symptom. The weighing log, not the calendar, tells you which you have.

2. A faint room with a strong bottle neck

Smell the neck of an IPM-only bottle and it can be strong, because the fragrance is all there. Walk into the room and it can be faint. That gap between neck and room is the signature of a carrier that holds the fragrance rather than lifting it, and it is why sniffing the bottle tells you almost nothing. Blind room sniffs at the door and at 1 m are the only throw readings that count.

3. Greasy, darkened or tacky reed tips

An oily carrier that doesn't evaporate stays in the reed. With some oils, makers see the tips darken, feel greasy or turn tacky over two to four weeks, and the release that was weak gets weaker. The fibre reed page claims "no swelling, no clogging"; an IPM-only arm is a hard test of that claim, so treat it as the page's statement, and check it with the day-14 fresh-reed swap in the plan below.

4. Residue where customers notice it

A reed flipped over a varnished shelf drips. With a carrier that doesn't evaporate, the drip stays as an oily mark. Customers notice marks on furniture faster than they notice throw. Put a white tile under one bottle per arm for the whole test and look at it on day 30.

Don't do this: answer a faint IPM-only diffuser by raising the oil from 20% to 30%. In a slow carrier more oil usually means a stronger bottle neck, the same faint room and a dearer bottle. Change the carrier at a fixed load first; only then is a load ladder worth running. The same mistake in a DPG formula is the subject of the 25% lavender in DPG post.

The cause table: carrier, oil, reeds, room, measurement

IPM is the first suspect, not the only one. One check per row separates them.

Rows are grouped by cause, not ranked. Each discriminating check changes one thing, so the result points at one row. The table describes what makers commonly report; it is not CSI test data.

Cause table · an IPM-only reed diffuser that disappoints
Cause → what you would see → discriminating check → fix · tendencies, not certainties
Cause What you would see Discriminating check Fix
Carrier volatility (IPM) IPM bottles barely lose weight; lemon faint at the door Grams a day, IPM-only vs base, same oil, reeds, shelf Move IPM out of the sole-carrier role
Solubility and stability Haze, droplets or a layer in one arm only Jar test per arm, room and cool, 7 days That arm is out at this load; lower the load or drop it
Viscosity and reed residue Greasy, darkened or tacky tips; rise slows after week 1 Day-14 fresh-reed swap in one bottle per arm If fresh reeds revive it, residue is part of the cause
Fragrance load and oil character All three arms faint, base included A heavier second oil in the best arm Change oil or load, not carrier
Reeds, bottle and fill Bottles within one arm disagree widely Reed count, depth, fill weight and neck check Standardise: 100 g by weight, six reeds, same pack
Room and environment Readings drift with the weather All arms on one shelf, rotated; log temperature and humidity Only compare arms run side by side
Process One arm mixed, stirred or rested differently Read your batch log One written procedure: carrier, then oil, same stir, same rest
Measurement error Judging by the liquid line; open sniffing; oily fingerprints on bottles Wipe and weigh; coded, blind sniffs Numbers and blind scores before conclusions

Two rows deserve a word. The fragrance row is the one that saves money: if the base arm is as faint as the IPM arm, the carrier is not the main problem, and no base will rescue that oil at that load. The measurement row is sharper with IPM than with glycols: an oily film on the outside of a bottle adds weight, and a fingerprint of IPM on the scale pan moves a 0.1 g reading. Wipe each bottle and the pan with a dry tissue before every weighing. (The Isopropyl Alcohol Spray we sell is a cleaner for tools; it is never a diffuser ingredient.)

The three-arm test against a passive-diffusion base

Three arms, one oil, one shelf. Only the carrier changes.

The test answers three questions at once: does IPM alone work for your oil (arm A), does a base designed for passive diffusion work better (arm B), and does a minor IPM share help or harm that base (arm C). Each arm is three bottles of 100 g plus a 20 g jar, mixed by weight. The oil is held at 20% in every arm.

The three arms · 100 g per bottle · three bottles each
9 bottles · oil 192 g including jars · IPM 288 g · base 480 g · 72 reeds
Arm Per 100 g bottle Jar (20 g) What it answers
A · IPM only 20 g oil + 80 g IPM 4 g oil + 16 g IPM Your formula, measured properly
B · base only 20 g oil + 80 g Pure Performance 4 g oil + 16 g base What a passive-diffusion base does with the same oil
C · base + minor IPM 20 g oil + 10 g IPM + 70 g Pure Performance 4 g oil + 2 g IPM + 14 g base Does a minor IPM share earn its place?

Arm C is a mix of your IPM and a base whose composition is not published, so it is a genuine unknown: watch it hardest for haze or a layer. If it clouds in the jar, it has answered the question for this oil, and you stop it there. If you also have DPG, a fourth arm with 20 g oil + 80 g DPG is a useful control; the four-carrier version of this test, with DPG as the yardstick, is in the hub.

1
Write your rule before mixingDated and kept with the log: your grams-a-day band from the life you sell, your throw threshold, your clarity conditions, and the residue condition. The suggested rule is in the tip box below; your numbers replace ours.
2
Jar tests first, 7 daysThree 20 g jars as in the table, each split between room temperature and somewhere cool overnight. Haze, droplets or layering puts that arm out at this load before it costs you bottles.
3
Mix the three masters by weightTare a clean vessel per arm: carrier first (for C, IPM then base), then oil, the same gentle stir for every arm. Label each with arm, lot, date and grams. Rest 24–48 hours, as the base page asks, the same for all three.
4
Fill, reed and weigh day 0100 g per bottle by weight; 6 fresh reeds per bottle from one pack, handled by the dry end. Wipe each bottle, weigh it assembled, code it 1–9 so the sniffers don't know the arm. Put a white tile under bottle 1 of each arm.
5
Weigh every 2–3 days; sniff blind on days 7, 14, 21, 28Same scale, same time of day; grams a day = weight lost ÷ days. A helper places one coded bottle at a time in a closed room for 30 minutes; score 0–5 at the door and at 1 m before the code is revealed. Rotate shelf positions at each reading.
6
Day 14: the fresh-reed swapIn bottle 3 of each arm, take out the reeds, look at the tips (greasy, darkened, tacky?), and put in 6 fresh reeds. If that bottle's grams a day and sniff score jump while bottles 1 and 2 don't, residue on the reeds was holding release back.
7
Day 30: read, don't extendMedian of three bottles per arm for grams a day and each sniff day; clarity notes; tiles; tips. Apply the rule as written. If the arms are too close to call, run a second 30 days; don't stretch the first.
Your decision rule (in-house, labelled)
(1) Clarity: clear in both jars for 7 days and in the bottles throughout. (2) Release: median grams a day inside your band (for example 2–3 g a day if you sell 90 g usable over 30–45 days). (3) Throw: a blind score of 3 or more at 1 m on at least three of four sniff days. (4) Residue: no oily mark on the tile and no tacky tips at day 14. (5) Agreement: three bottles within about ±20% of the arm's average. (6) IPM's place: arm C keeps IPM only if it matches or beats arm B on (2) to (4). Thresholds are suggestions: set, date and keep yours.

The weighing method and a log template with room columns are in our live guide on testing reed diffuser performance over 30 days; if arm C clouds, the cloudy-mixing guide covers the diagnosis.

Reading the result: when IPM keeps a minor role

IPM earns a place by beating the arm without it. Being harmless is not enough.
Outcome patterns · median of three bottles per arm
Assumes every arm you read stayed clear; a cloudy arm fails whatever it scores
Pattern What it means What to do next Note
B passes, A fails IPM alone is too slow with this oil Keep IPM out of the sole-carrier role; a second run of B confirms The common pattern makers report
C matches or beats B A 10% IPM share did no harm here Keep it only if it earns its place: residue, clarity, cost A second run before production
C clearly worse than B Even a minor IPM share slows release here Drop IPM from this product Saves you the IPM and a step
A passes your rule Unexpected, but your test says so Repeat the run in a warmer and a cooler month Then keep it; you don't need our base
All three faint Oil or load, not carrier A heavier oil in arm B Buy nothing more yet
Bottles in one arm disagree Process or measurement Re-run that arm Read nothing until they agree

The first pattern is the one makers most often report, and it settles the headline question: IPM alone holds the fragrance back. The second and third answer the "minor modifier" question, and the bar is deliberately high. A 10% IPM share that merely matches the base adds a raw material, a weighing step, a supplier and a residue risk to every batch. Keep it only if it buys you something you can measure: a slower, more even release that still passes throw, or a clarity improvement with a difficult oil. If it doesn't, simplicity wins.

The fourth pattern, IPM alone passing, is unusual but possible with some oils and rooms. Don't argue with your own data; repeat it in a different month, because a warm April and a cool December can change grams a day, and then keep it. The same caution applies to a base win: one 30-day run in October is evidence, not proof. If you also want to know whether a slower carrier is costing you throw in summer, the summer evaporation guide covers the seasonal side.

Don't do this: change the carrier, the oil and the reed count in one go because the IPM bottle "obviously" failed. If the new bottle works you won't know why, and you can't repeat it with your next fragrance. One variable per arm, three bottles per arm, 14–30 days, then the next question.
"A carrier that dissolves your oil has done one job of three. Weigh it, sniff it blind, and let IPM keep only the role it earns."
— CandleMakingSuppliesIndia

Cost per bottle, and the purchase step

IPM's cost is on your invoice. The base's cost is on our page. Compare like for like.

IPM per bottle is 80 × your price per kg ÷ 1,000; we don't sell it and won't guess its price. The CSI side is published. Citrus Lemon at 20 g is ₹60.00 a bottle from the 100 gm and ₹56.64 at the 1 kg price. Pure Performance is ₹175.84 for 80 ml from the 500 ML, or ₹153.86 for arm C's 70 ml; from the 100g sample, 80 g costs ₹260.00. Six reeds are ₹48.00; a Gold 120 ML bottle is ₹106.20. On the base route, a bottle's CSI materials come to ₹386.68; on the IPM-only route the CSI side is ₹210.84 plus your IPM. Base millilitres equal grams only if your weighed density is near 1.0 g/ml: weigh 100 ml of the 500 ML on day 0 and correct the figures. Material costs exclude labour, freight, packaging and GST.

Say the winner goes into a first run of 40 bottles: 800 g of oil. Citrus Lemon 1 kg (₹2,832.00) covers it; two 500 gm would cost ₹8.00 more. Reeds: 240, as two packs of 100 and one of 50 (₹2,000.00). Bottles: four Gold 120 ML packs (₹4,248.00).

The 40-bottle run · CSI side by winning arm
Your IPM comes from your own supplier · base ml ≈ g only after you weigh 100 ml
Winner Carrier needed CSI items CSI side
B · base only 3,200 g base oil 1 kg, Pure Performance 500 ML ×7 (₹7,693.00), reeds, bottles ₹16,773.00
C · base + minor IPM 2,800 g base + 400 g IPM oil 1 kg, Pure Performance 500 ML ×6 (₹6,594.00), reeds, bottles ₹15,674.00
A · IPM only 3,200 g IPM oil 1 kg, reeds, bottles ₹9,080.00

Against our own interest: don't buy seven bottles of base on the strength of one run. Buy the 500 ML for the test, confirm with a second 30-day run, then order. The bases are sold by the 500 ml; CSI lists no 5 kg or 25 kg base pack, so for larger volumes ask on WhatsApp rather than assuming a tier. For working out how much base a run of 100 ml bottles needs, the 100-bottle base quantity guide does the arithmetic.

Christmas is 25 December 2026. A three-arm test started in mid-October gives a 30-day read in mid-November and leaves time for one confirmation run before December gifting. Don't switch a formula you are already shipping for Diwali (8 November 2026) on a test that isn't finished. Message us your quantities to confirm stock and dispatch, with a GST invoice.
WhatsApp a stock check

What CSI sells for this, safety, and what we don't sell

What we don't sell: CSI does not list IPM, DPG, DPM, Augeo-type solvents or perfumer's alcohol. Your IPM comes from your own supplier, with that supplier's SDS and technical sheet. The only alcohol in our catalogue is the Isopropyl Alcohol Spray (150 ML ₹383.00, 1 Litre ₹520.00), a cleaner, and never a diffuser ingredient. What our base pages don't say: every in-stock CSI base page says "Blend with 10-30% fragrance oil", but none states its composition, density, flash point, SDS, IFRA or hazard information in the text we captured. So we don't claim Pure Performance contains or excludes IPM or any other solvent, we don't claim it is compatible with an IPM share (arm C tests that), and we don't claim any base always outperforms IPM. Ask us on WhatsApp what technical data we can obtain.

What we do sell for this work: ready-made bases as comparison arms (Pure Performance in 100g and 500 ML; Lift, Depth, Softness and Longevity in 500 ml; the CSI HyperDiffusion Base™ was out of stock on 7 October 2026 and isn't offered), fibre reeds (not rattan), Gold bottles, beakers and fragrance oils. Argued against our own interest: if your IPM-only arm passes your rule twice, keep it. We would rather you sell a formula your data supports than one with our base in it.

Safety, plainly. Fragrance oils and many diffuser carriers are flammable; treat every formula as flammable until the SDS of each component, and advice on the full formula, says otherwise. Mix and store away from flames, hobs and heaters, and keep finished diffusers away from candles. Wear gloves and eye protection: IPM and fragrance oil on skin should be washed off with soap and water, and splashes in the eye rinsed with water and medical advice sought. IPM is slippery: wipe spills from the floor and the bench at once, and from varnished furniture before it marks. Keep raw materials and finished diffusers out of reach of children and pets. Hazard labelling, storage and courier rules depend on the full formula and where you sell; read every SDS and take advice. This page is not legal advice.

What to buy for the test, and what to skip

Chosen on page statements, price and stock on 7 October 2026, not on performance data; CSI publishes none for its bases or reeds. Each card says when not to buy.

1
ready-made base · the comparison arm
Pure Performance Reed Base Oil (100g / 500 ML)
This is the "base designed for passive diffusion" your question asks about, in its plainest form. The page says "smooth even wicking", "No added fixatives" and "Blend with 10-30% fragrance oil"; it publishes no composition, density, flash point or SDS in the text we captured, so it is a black box you judge by results. It carries two arms here: B (base alone) and C (base with a 10% IPM share). Against our own interest: if the IPM-only arm passes your rule, you don't need this base at all, and we never claim it contains or excludes IPM, DPG or any other solvent.
Size Price Unit price For this test
100g ₹325.00 ₹3.25 a gram five would cost ₹1,625.00: ₹526.00 more than one 500 ML
500 ML ₹1,099.00 ₹2.20 a ml covers the 480 g both base arms need if your weighed density is near 1.0 g/ml
Both base arms: the 500 ML, ₹1,099.00. Buy 500 ML — ₹1,099.00
2
fragrance oil · a light test oil that shows a slow carrier up
Citrus Lemon Fragrance Oil
A light, top-heavy oil is the hardest test for a slow carrier: if IPM holds lemon back, you will smell it at the door. The page lists "zesty lemon and lime top notes, bright grapefruit and orange heart, and a tangy mandarin finish" and states "For reed diffusers, use 10-30% depending on the base." Use your product oil instead if you sell something heavier; the method is the same. Price fact: the 500 gm (₹2.84 a gram) and the 1 kg (₹2.83 a gram) are almost the same per gram, so don't buy 1 kg to save money on a test.
Size Price Per gram Use
15 gm ₹81.42 ₹5.43 smell check only
50 gm ₹170.00 ₹3.40 two bottles
100 gm ₹300.00 ₹3.00 two packs cover 192 g, 8 g spare
500 gm ₹1,420.00 ₹2.84 ₹820.00 more than two 100 gm
1 kg ₹2,832.00 ₹2.83 the 40-bottle run (800 g)
Test oil: two 100 gm, ₹600.00. Buy 100 gm — ₹300.00
3
fibre reeds · the same reed in every arm
Fiber Diffuser Reeds (Black)
72 reeds: six in each of 9 bottles, plus one fresh set per arm for the day-14 swap that tells residue from release. The page claims "no swelling, no clogging" and "Consistent diffusion from day 1 to day 30"; an oily IPM arm is a hard test of that claim, so treat it as the page's statement, not a result. 20.3 cm; no diameter stated. CSI sells fibre reeds, not rattan; if you sell rattan, use your rattan in all three arms.
Pack Price Per reed For this test
Pack of 25 ₹236.00 ₹9.44 with the 50
Pack of 50 ₹400.00 ₹8.00 with the 25: 72 needed, 3 spare
Pack of 100 ₹800.00 ₹8.00 ₹164.00 more than 50 + 25
Pack of 500 ₹4,000.00 ₹8.00 production only; no saving per reed
Test reeds: ₹636.00. Buy 50 — ₹400.00
4
bottles · one vessel for all three arms
Gold Reed Diffuser Bottle Pack of 10 (120 ML)
9 identical bottles and one spare. The page text says "50 and 100ml" while the variants are 50 ML and 120 ML, and it states no neck size. IPM is oily and can creep: check cap liners and any plastic parts against your IPM supplier's SDS, and wipe the outside of each bottle before weighing. Skip it if you already own nine identical bottles.
Variant Price Each For this test
120 ML Pack of 10 ₹1,062.00 ₹106.20 each one pack: 9 bottles + one spare
50 ML Pack of 10 ₹826.00 ₹82.60 each only if you sell 50 ml
One pack: ₹1,062.00. Buy 120 ML pack — ₹1,062.00
5
ready-made base · optional fourth arm
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
If citrus and florals are your range, a second passive-diffusion base is a fair extra arm. The page positions it for "floral, citrus, green, and fruity fragrance families" and says it makes them "bloom, diffuse further". That is page positioning, not tested fact, and like every in-stock CSI base it publishes no composition or SDS in the text we captured. Skip it on the first run: three arms answer the IPM question; Lift answers a different one.
Size Price Unit price For this test
500 ml ₹1,099.00 ₹2.20 a ml an optional fourth arm for citrus sellers

Skip for now: a second ready-made base on the first run; the CSI HyperDiffusion Base™, out of stock on 7 October 2026; the Room & Linen Spray Base and the Ultrasonic Diffusion Concentrate Base™, which are not reed diffuser bases; the 1 kg of oil before a pass; and the 500 reed pack, which is the same price per reed as the 50. A Silicon Measuring Beaker 250 ML (₹600.00) is useful only if you lack a clean vessel per arm; with it, the full kit is ₹3,997.00.

The CSI principle
A carrier is judged on release, not on how clear it looks in the bottle.
IPM alone against a passive-diffusion base and a base-plus-10%-IPM arm; one oil at 20%; three bottles each; 14–30 days by weight. CSI side: ₹2,335.00 with your own bottles.
Why trust this guide

CandleMakingSuppliesIndia sells the bases, oil, reeds and bottles named here. It does not sell IPM, DPG, DPM, Augeo-type solvents or perfumer's alcohol, and this page says so. Our base pages publish no composition, density, flash point or SDS in the text we captured, so our base is an arm of your test, and the page tells you to keep IPM if it wins.

Every CSI price was checked on 7 October 2026, with stock checked per variant; everything priced here was in stock on that date, and the CSI HyperDiffusion Base™ is out of stock and not offered. Page wording is quoted and attributed to the page.

IPM's behaviour is described as general, hedged tendencies with no numeric viscosities, densities, flash points or evaporation rates; those belong to your supplier's SDS and TDS. The formula, arms, thresholds and 40-bottle run are labelled worked examples; nothing here is CSI test data. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.

Frequently asked questions

Can isopropyl myristate be used as a reed diffuser base on its own?
You can mix one, but it is rarely a good product. IPM is oily and very low in volatility, so it tends to slow release and leave reeds greasy. Test it against a ready-made base with the same oil, three bottles each, by weight, for 14–30 days.
Why does my IPM reed diffuser smell strong at the bottle but not in the room?
The fragrance is in the bottle, held by a carrier that tends to evaporate very slowly. A strong neck and a faint room is the typical pattern. Judge throw only by blind sniffs in the room, and compare with a base arm.
How much IPM can I add to a reed diffuser base?
There is no number we can give for every oil and base. Test a minor share, such as 10 g in 100 g, against the base alone with the same oil, and keep it only if it matches or beats the base on release, throw, clarity and residue.
Does IPM clog fibre reeds?
With some oils, makers report greasy or tacky reed tips over a few weeks. Check it: swap fresh reeds into one bottle per arm on day 14; if that bottle revives while the others don't, residue was part of the problem.
Does CSI sell IPM or say whether its bases contain it?
No. CSI does not sell IPM, DPG, DPM or Augeo-type solvents, and its base pages do not state composition, density, flash point or SDS data in the text captured. Ask on WhatsApp for what can be shared.
Is an IPM reed diffuser safe to use at home?
Treat it, like most diffuser formulas, as flammable, and check the SDS of each component. Keep it away from flames, children and pets, wipe spills from furniture, and take advice on labelling for the full formula.
IPM as the only carrier
Put your IPM formula beside a passive-diffusion base, and let three bottles per arm decide.
The CSI side of the three-arm test is ₹2,335.00 with your own bottles: Pure Performance 500 ML, Citrus Lemon 100 gm ×2 and 75 fibre reeds. If IPM alone wins twice, keep it.
Shop Pure Performance Check test-kit stock on WhatsApp
Editorial standards & sources
About this guide: part of CSI's cluster "Comparing DPM, IPM and Augeo-Type Solvents" (8321–8340). It owns the question of IPM as the only carrier: the comparison against a passive-diffusion base, the typical IPM-only problems (hedged), the three-arm test with a minor-IPM arm, and the rule for when IPM keeps a role. IPM compatibility checks are 8325; IPM with a floral and poor throw is 8326.

Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Blue Ocean Fragrance Oil, Citrus Lemon Fragrance Oil, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Premium Coconut Soy Wax, Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g). They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Avanthi Cheeli, Sooraj R, snehal Chaudhary, Thenirvaofficial, Sooraj R, Manasa GN. Reviews below five stars are included as published, not filtered out.

Figures verified 7 October 2026, CSI live pricing: Pure Performance Reed Base Oil 100g ₹325.00, 500 ML ₹1,099.00 (₹2.20 a ml); Lift Base 500 ml ₹1,099.00; CSI HyperDiffusion Base™ ₹1,499.00 (out of stock); Citrus Lemon Fragrance Oil 15 gm ₹81.42 (₹5.43 a gram), 50 gm ₹170.00 (₹3.40 a gram), 100 gm ₹300.00 (₹3.00 a gram), 500 gm ₹1,420.00 (₹2.84 a gram), 1 kg ₹2,832.00 (₹2.83 a gram); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed from 50 up); Gold Reed Diffuser Bottle Pack of 10, 120 ML ₹1,062.00 (₹106.20 each), 50 ML ₹826.00 (₹82.60 each); Silicon Measuring Beaker 250 ML ₹600.00; Isopropyl Alcohol Spray 150 ML ₹383.00, 1 Litre ₹520.00 (a cleaner). Per unit = pack price ÷ units, two decimals. CSI does not list IPM, DPG, DPM, Augeo-type solvents or perfumer's alcohol.

Non-price figures: the reader's formula is the series default (20 g oil + 80 g IPM per 100 g) because the title gives none; arms, thresholds, the day-14 swap and the 40-bottle run are labelled worked examples. IPM's properties are general tendencies; no numeric viscosities, densities, flash points or evaporation rates are quoted. Base ml are treated as grams only after you weigh 100 ml. "Blend with 10-30% fragrance oil", "No added fixatives", "smooth even wicking", "no swelling, no clogging", "Consistent diffusion from day 1 to day 30", "floral, citrus, green, and fruity fragrance families" and "For reed diffusers, use 10-30% depending on the base." are page wording. Costs exclude labour, freight, packaging and GST. Diwali 8 November 2026 and Christmas 25 December 2026 are calendar facts.
Zurück zum Blog