I Am Switching Reed Diffuser Base Suppliers — What Incoming Quality-Control Checks Should I Perform Before Using a New Lot in Production?

I Am Switching Reed Diffuser Base Suppliers — What Incoming Quality-Control Checks Should I Perform Before Using a New Lot in Production?

 

Dark Vanilla 100 g ₹790.00 (stress oil) Gold 50 ML retains ₹82.60 each Weighing scale ₹354.00
New base supplier · first lot
Check every lot against your approved-sample retain before it touches production.
★★★★★
"One of the best fragrance oils"
AnonymousVerified buyer · Jul 2025
Dark Vanilla Fragrance
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml) For Uplifting, Mood-Boosting Scents
★★★★☆
"I just tried it out , it's absolutely stunning. Super easy to use and such a life saver."
ThenirvaofficialVerified buyer · Mar 2026
Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g)
★★★★★
"Nice product"
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML)
★★★★★
"Soy wax quality is the best, which ever products ordered were properly packed and delivered as early as possible, timely response to the inquiries. Good service"
Jaya SawlaniVerified buyer · Nov 2025
Luxury Soy Wax CSI 464 (Flakes Form) For Container Candles
★★★★★
"Thankyou so much candle supplier M happy with the smell of dark vanilla M obsessed with the vanilla fragrance💕 I ll definitely shop again☺️"
SUMAN BISHTJul 2025
Dark Vanilla Oud
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. They are general reviews of the products named on each card, not assessments of the advice set out below. Wording is unedited.
✓ Prices verified 7 October 2026, stock checked per size ✓ GST invoice; MSDS and IFRA documentation for oils on request ✓ We tell you to QC our lots too
CSI Reed Diffusers · Incoming QC
A new supplier sends you a lot, not a product. Quarantine it, compare it with a retain of the sample you approved, test it in your formula for 14 days, and release it on limits you wrote down first.
9 checks
documents to release, about 17 days from receipt · CSI QC tools ₹1,254.00, CSI live pricing, October 2026
Quick answers — read this first
I am switching reed diffuser base suppliers. What should I check before a new lot goes into production? Nine things, in order: documents, receipt weight, appearance and odour beside a retain, relative density, clarity with your production oil, clarity with a stress oil at the top of the load range, a 14-day diffusion check by weight, retains, and a written release decision.

What is the reference? A retain of the sample lot that qualified the new supplier, kept from your trial. Every check compares the new lot with it, side by side, on the same day. Without a retain you are checking against memory.

How long before I can use the lot? About 17 days from receipt: day-1 checks, a 24–48 hour rest for the batches, then 14 days of weighed diffusion. Look and density can stop a bad lot on day 1; only the diffusion check can release a good one.

What does it cost? Tools once (₹1,254.00), then roughly ₹3,078.00 of CSI consumables for the first lot and 860 g of the lot itself — 17.2% of a 5 kg delivery.
The short answer
The principle: quarantine every new lot, compare it with a retain of the approved sample, release only on a written rule.
Day 1 checks: documents and lot number, net weight, appearance, odour, relative density (same volume weighed, same vessel, same hour).
Formula checks: 100 g clarity batches with your oil at 20% and a stress oil at 30%; 3 v 3 diffusion bottles weighed every 2 days for 14 days.
Decision: release, hold (retest, ask the supplier) or reject; retains of every lot kept while its products are on sale.
Incoming QC: a new base lot, day by day The lot stays in quarantine until the last check passes. Illustrative readings, not CSI test data. Day 0 Receipt Quarantine label on the drum SDS, lot no., date, storage advice Seal intact; net weight vs invoice Day 1 Look, smell, weigh Appearance beside the retain, white and black card Odour on blotters at 0, 10 and 60 minutes Same volume weighed: new lot vs retain Day 1 Mix the test batches Clarity: your oil at 20% in new lot and in retain Stress: Dark Vanilla at 30%, both bases Six 100 g diffusion bottles (3 new, 3 reference) Day 3–7 Clarity holds? Room, warm and cool positions Haze, layer, sediment, colour shift New lot no worse than reference Day 14 Diffusion check g/day by weight, 3 v 3, same room Blind sniff at fixed distance Inside your band → release RELEASE HOLD · retest REJECT Illustrative lot card Net on receipt: 5.03 kg (0.6% vs 5 kg invoiced) Appearance: clear, faint tint Odour: slight solvent note 50.00 ml retain: 49.10 g 50.00 ml new lot: 49.90 g Difference: 1.6% (band ±2%) Clarity 20%: clear, both Stress 30%: new lot hazy g/day reference: 1.21 g/day new lot: 0.98 Difference: -18.7% Decision: HOLD. Ask supplier; do not fill production. Bands (±2% density, ±15% g/day) are your own in-house limits, set before the lot arrives. Example figures only.
A new lot moves from quarantine to release through dated checks; any failure sends it to hold or reject. The side panel is an illustrative lot card: density inside the band, but the 30% stress batch hazy and g/day -18.7% against reference, so the lot is held. Example readings and in-house bands, not CSI test data.
Straight answer
I am switching reed diffuser base suppliers. What incoming quality-control checks should I perform before using a new lot in production?
Quarantine the lot and check it against a retain of the sample that qualified the supplier. On day 1: documents (SDS, lot number, manufacture date, storage advice), net weight against the invoice, appearance and odour beside the retain, and relative density by weighing the same volume of each in the same vessel. Then test it in your formula: 100 g clarity batches with your production oil at 20% and a heavy stress oil at 30% (top of the usual 10–30% range), held at room, warm and cool positions, and a diffusion check of 3 new-lot bottles against 3 reference bottles, 100 g each, weighed every 2 days for at least 14 days. Keep two retains of the lot. Release only if every check meets limits you wrote down before the lot arrived; otherwise hold and ask the supplier, or reject.
One line: no retain, no reference; no written limit, no release — and that applies to our lots too.
Set up the QC kit once: scale and two beakers ₹1,254.00; per first lot, Dark Vanilla 100 g, a 120 ML and a 50 ML bottle pack and 50 fibre reeds, ₹3,078.00.
Buy the weighing scale

Your switch, written down

The checks only mean something against a fixed starting point, so write yours down. The worked example: your production formula is 20 g fragrance oil + 80 g base per 100 g, filled at 100 g into Gold 120 ML bottles with 6 black fibre reeds. You trialled supplier B's sample against your old supplier A's base, B passed, and you kept a retain of B's sample. B's first production lot — 5 kg — is arriving. Old stock from A is nearly gone.

Two things follow. First, the reference for every check is B's approved sample retain, not A's base: you are asking "is this lot the same as what I approved?", not "is B like A?". If you have no retain, use the last of A's base as a second-best reference and accept that the comparison mixes two questions. Second, a production lot is not a sample. Samples are sometimes drawn differently, or from a different lot. Checking the lot is not distrust; it is what makes a supplier switch safe. The broader question of qualifying a new supplier for products you already sell well is covered in our new base supplier test; this page starts where that ends, with a lot at your door.

A supplier sells you a lot, not a product. Check the lot.

Before the lot arrives: reference, documents, limits

Three things should be ready before the courier arrives. The reference: your retain of the approved sample, in sealed glass, out of light. The documents you expect: the SDS for this product (for hazard, handling and storage information), the lot number and manufacture date, and any technical data the supplier offers. Ask for these with the order rather than after; the fuller list for big orders is in what to request before buying 25 kg, and the specification questions to ask when choosing a base are in technical specifications to compare. Your limits: written, dated, before the lot arrives. If you set limits after you have seen the readings, you will set them to pass.

Be realistic about what a small supplier can give. Many will provide an SDS and a lot number but no certificate of analysis. CSI is one of those cases in a specific way: our reed diffuser base pages publish no composition, density, flash point, SDS or IFRA information in the text on the store, so if you are switching to a CSI base there is no published specification to check against. Ask us on WhatsApp for whatever documentation is available for the lot, and then QC our lots exactly as this page describes. Your retain is the specification.

Don't do this: pour the new lot straight into production because "the sample was fine" and the first customer orders are waiting. If the lot is different, you find out from returns, and every bottle filled since the switch is suspect. Fix: quarantine label on the drum the moment it arrives; day-1 checks the same day; production keeps running on the last of the old base or on lot-checked stock until release.

The nine incoming checks

The table lists the checks in the order you run them. The first five are quick and can stop a bad lot on day 1. The last four test the lot where it matters, in your formula, and take up to two weeks.

The incoming checks · what, how, and an example in-house limit
Every limit in the last column is an example for you to replace with your own, written down before the lot arrives. CSI publishes no specification for its bases to check against.
Check How (by weight wherever possible) Reference Example in-house limit
Documents SDS for this product, lot number, manufacture date, storage advice; any technical data the supplier offers Your supplier file Missing SDS or lot number → hold
Receipt Seal, label, container damage; gross weight − container tare vs invoice Invoice Net within ±1% of invoiced (example reading 0.6%)
Appearance 50 ml in clear glass beside the same volume of retain, daylight, white and black card Retain of the approved sample lot No haze, particles or tint the retain lacks
Odour Blotter dipped in each, smelled at 0, 10 and 60 minutes by two people Retain No off-note (sour, plasticky, sharper solvent) the retain lacks
Relative density Weigh the same measured volume of new lot and retain, same vessel, same hour Retain, same day Within ±2% of the retain
Clarity with your oil 100 g batch: 20 g production oil + 80 g base, new lot and retain; rest, then room, warm, cool for 3–7 days Same batch in retain base New lot no hazier than reference at any position
Stress clarity 100 g batch: 30 g Dark Vanilla + 70 g base (top of the 10–30% page range), both bases Same in retain base Flags a lot that is weaker on difficult oils
Diffusion 3 bottles new lot v 3 reference, 100 g at 20%, 6 black fibre reeds, one room, weighed every 2 days for 14 days Reference formula bottles Mean g/day within ±15%; blind sniff not worse
Retains 2 × 40 g of the lot in sealed glass, labelled supplier, lot, date — Kept while products from the lot are on sale

The order matters for cost. If the lot fails appearance or density on day 1, you have spent nothing but time and can talk to the supplier before you mix a gram of oil into it. If it passes those, the formula checks are worth their grams: about 860 g of the lot in total, 17.2% of a 5 kg delivery.

Relative density without a laboratory

You don't need the base's absolute density for incoming QC; you need to know whether this lot weighs the same per volume as your approved sample. That is a comparison you can make well at home if you control the method. Use one rigid container with a fill mark (a small glass bottle works), bring both liquids to the same room for a few hours so they are at the same temperature, fill to the mark, weigh, empty, rinse and dry, repeat with the other. Do each twice.

In the illustrative lot card, 50.00 ml of retain weighed 49.10 g (0.982 g per ml) and 50.00 ml of the new lot 49.90 g (0.998 g per ml): the new lot is 1.6% heavier, inside a ±2% example band but enough to note. A larger gap is a strong hint that the solvent system or its proportions differ, even when the liquid looks identical. A silicone measuring beaker is fine for batches but not ideal here: it can flex, and its scale is a guide. The density step for formulating by weight, rather than for QC, is in fair formulas when densities differ.

Temperature changes density
Liquids expand slightly as they warm, so a sample from a cold godown and one from a warm room can differ for no reason connected to the lot. Measure both samples in the same hour after resting them side by side. If you can, note the room temperature on the lot card.

Clarity and diffusion: testing the lot in your formula

A base can match on look, smell and density and still behave differently with fragrance. Two clarity batches and one diffusion check find out.

1
Clarity with your production oil. Two 100 g batches by weight: 20 g of your production oil + 80 g base, one in the new lot, one in the retain. Stir, cover, rest 24–48 hours, then set one bottle of each at room, near a warm window (labelled position) and in the coolest corner you have, for 3–7 days.
2
Clarity with a stress oil. Two more 100 g batches: 30 g Dark Vanilla + 70 g base, at the top of the 10–30% range CSI oil and base pages quote. Heavy, sweet oils are where solvent differences show first. You are not asking whether the stress batch is perfect; you are asking whether the new lot is worse than the retain.
3
Make six diffusion bottles. Three bottles of your production formula in the new lot, three in the reference base (retain, or the last of the approved stock), 100 g each by weight in Gold 120 ML bottles, 6 black fibre reeds from one pack, one shelf.
4
Weigh every 2 days. Record each bottle's weight and the room temperature; g/day = (start − current) ÷ days. Run at least 14 days; 30 if the lot will supply a large order.
5
Blind sniff. Twice a week at a fixed distance, two or three people who don't know which bottle is which, positions shuffled.
6
Decide on the written limits. Release if the new-lot mean g/day is within your band (example ±15%) of the reference, no clarity batch is worse than its retain twin, and the sniff does not rank it lower.

In the illustrative card the 20% clarity batches were both clear, but the 30% Dark Vanilla batch hazed in the new lot and not in the retain, and the new lot's mean was 0.98 g/day against 1.21 (-18.7%). Either finding alone would justify a hold; together they say this lot is not the base you approved. Hold, send the supplier your readings and the lot number, and keep production on approved stock. If the cloudiness question needs deeper diagnosis, our cloudy-mixing compatibility guide covers it.

Don't do this: skip the diffusion check because the clarity batches look perfect, or judge it on day 3. Clarity says the oil dissolves; it says nothing about how fast the bottle empties. Fix: run all three formula checks and wait for 14 days of weights. If time is short, receive the lot earlier, don't test it shorter.

When a check fails: the cause table

A failed check is a question, not a verdict. Before you reject a supplier's lot, make sure the failure belongs to the base and not to your oil, your reeds, your room or your measuring. Five causes, kept apart:

Cause table · when a new lot fails a check, whose fault is it?
Cause → what you would see → discriminating check → fix. Several failures are not the base at all.
Cause What you would see Discriminating check Fix
The base itself differs — a different solvent system or grade, or a lot outside the supplier's normal range Density off, odour different, and the stress batch hazes in the new lot but not the retain Repeat density and stress clarity with a second sample drawn from another part of the drum Hold; send the supplier your readings and ask for their lot data; reject if confirmed
Fragrance load or oil character — your standard oil changed, not the base Clarity or sniff differs in both the new lot and the retain versus last time Make the same batch with your retained oil lot The oil lot needs its own check (a new oil lot clouding a formula)
Reeds, bottle or fill Diffusion bottles spread widely within an arm Fill weights logged; one reed pack for all six Re-run with matched reeds and fills
Environment — tests run in a different season or room from the qualification Reference and new-lot bottles both shifted versus the original qualification Reference arm in the same room and window (that is why it exists) Judge only new versus reference, side by side
Measurement error — volumes read off a soft beaker, readings at different temperatures A density difference that disappears when re-measured Re-weigh both samples in the same rigid vessel, filled to the same mark, within the same hour Fix the method before blaming the lot

The retain-twin design does most of this work for you: because every test has the reference base beside it, made the same day with the same oil, reeds and room, a difference between the two arms points at the base. A difference that shows in both arms points somewhere else.

Retains, records and release

Every lot gets a one-page record: supplier, product, lot number, date received, net weight, each check with its reading and limit, the decision (release, hold, reject), date and initials. Staple the SDS behind it. Keep two retains of 40 g each in sealed 50 ML glass bottles, labelled supplier, lot and date, out of light, for as long as products from that lot are on sale (our judgement; longer if you sell to businesses who may ask).

Release, hold or reject · decision rules (examples)
Your own rules, written before the lot arrives; these are illustrations.
Decision When What you do
Release Every check inside its written limit Remove quarantine label; record lot number against every production batch it goes into
Hold One check outside its limit, or a borderline reading Repeat that check on a fresh sample; message the supplier with readings and lot number; production stays on approved stock
Reject A confirmed failure on density, odour, stress clarity or diffusion; or no SDS or lot number Return or set aside per your agreement with the supplier; keep the retain and the record

Recording the lot number against each production batch is what makes the retains useful. When a customer complains in three months, the bottle's batch leads to the base lot, the base lot to its retain, and a 14-day comparison between that retain and a current lot tells you whether the base changed. A new fragrance-oil lot needs the same discipline; that case is a new oil lot clouding the formula. A switch is also the worst moment to change anything else: if you are scaling at the same time, follow the scaling post with the released lot only.

Diwali is 8 November 2026, 32 days from 7 October 2026. A lot received today and checked properly releases in about 17 days. If a festive run depends on a new supplier's lot, get it in now, or run festive stock on base you have already released.
WhatsApp about festive dispatch
This page is for you if: you have chosen a new base supplier and the first production lot is arriving, or you buy base repeatedly and want a routine lot check. It is not for you if: you are still choosing between bases (fair trial against your current supplier, choosing between three tested bases) or deciding pilot size (pilot before 25 kg).

The QC kit from CSI

Chosen on page wording, price and stock on 7 October 2026. None of these is a base: the QC kit is the same whichever supplier's lot you are checking, including ours.

1
Stress oil · the difficult case
Dark Vanilla Fragrance
A useful stress oil for clarity checks because its page describes a heavy profile — "rich vanilla and spice opening into deep caramel and cream, settling into dark amber and warm musk" — and gives "For reed diffusers, use 10-30% of total diffuser base." Sweet, heavy oils are the kind the Depth Base page says it "Stabilises", which tells you suppliers themselves treat them as the tricky case. At 30%, two stress batches use 60 g per lot, so a 100 g covers 1 lot. Limitation: it is a stress probe, not your formula; if it hazes in both bases, it tells you nothing about the new lot.
Size Price Per gram Lots of stress tests (60 g each) Stock
15 gm ₹130.00 ₹8.67 0 In stock
50 gm ₹410.00 ₹8.20 0 In stock
100 gm ₹790.00 ₹7.90 1 In stock
500 gm ₹3,840.00 ₹7.68 8 In stock
1 kg ₹7,646.00 ₹7.65 16 In stock
100 g ₹790.00 per lot of stress tests. Buy Dark Vanilla
2
Density and batches
Silicon Measuring Beaker 100 ML / 250 ML
For making the 100 g clarity batches and drawing samples. For relative density, use a rigid vessel filled to one mark for both samples and weigh; a soft silicone beaker can flex, and its page promises "clear scales" for guidance, not a calibrated volume. What matters is that the retain and the new lot are measured identically.
Item Price Stock
100 ML ₹300.00 In stock
250 ML ₹600.00 In stock
One-off; part of the ₹1,254.00 tool set. Buy beakers
3
Weighing
Candle Making Weighing Scale
Every check on this page is a weighing: receipt net weight (on a platform scale), density, batch grams, fills and the diffusion bottles every 2 days. The page states no capacity or resolution; for a 1–2% density comparison you need at least 0.1 g steps on a 50 ml sample, ideally 0.01 g. Check it with a known weight before each QC session.
Item Price Stock
Candle Making Weighing Scale ₹354.00 In stock
₹354.00 — check the step on its label. Buy the scale
4
Diffusion check and retains
Gold Reed Diffuser Bottle Pack of 10 (120 ML and 50 ML)
Six 120 ML bottles for the 3-versus-3 diffusion check, the same bottle as production. The 50 ML pack makes neat, sealable retain bottles at ₹82.60 each: two per lot, 40 g each, labelled. The page lists "Size: 50 and 100ml" beside a 120 ML variant and states no neck size, so fill by weight.
Pack Price Per bottle Stock
50 ML × 10 ₹826.00 ₹82.60 In stock
120 ML × 10 ₹1,062.00 ₹106.20 In stock
120 ML × 10 ₹1,062.00; 50 ML × 10 ₹826.00. Buy Gold bottles
5
Reeds for the diffusion check
Fiber Diffuser Reeds (Black)
Thirty-six reeds per lot (six bottles × 6) from one pack, so reeds never vary between the arms. The 50-pack (₹400.00) covers one lot with spares; reeds are flat at ₹8.00 from 50 up, so there is no saving in the 500-pack for QC use. The page's "no swelling, no clogging" is a claim your reference arm checks every time.
Pack Price Per reed Stock
25 ₹236.00 ₹9.44 In stock
50 ₹400.00 ₹8.00 In stock
100 ₹800.00 ₹8.00 In stock
50-pack ₹400.00 per lot. Buy black fibre reeds

Against our own interest: if your new supplier is not CSI, you may not need anything from us except bottles and reeds you already use; a scale and beakers from anywhere work if they measure consistently. And if you are switching to a CSI base, check our lots this way too. We cannot hand you a published specification for them, so your retain and your records are the protection.

The CSI principle
Every lot is new until your retain says it isn't.
Quarantine, documents, look, smell, weigh, two clarity batches, a 3-v-3 diffusion check for 14 days, retains and a written decision. Tools ₹1,254.00 once; first-lot consumables ₹3,078.00.
"A retain costs forty grams. Not having one costs the argument with your supplier."
— CandleMakingSuppliesIndia
Why trust this guide

CandleMakingSuppliesIndia sells reed diffuser bases, oils, bottles and reeds. This page still says that our base pages publish no composition, density, flash point, SDS or IFRA information on the store, that you should QC our lots as strictly as anyone's, and that CSI sells no DPG, DPM, IPM, Augeo-type solvent or perfumer's alcohol.

Every CSI price was checked on the live store on 7 October 2026, with stock checked per size; every item priced here is in stock on that date.

All readings on the lot card, the ±1%, ±2% and ±15% limits, the 40 g retains and the retention period are worked examples or judgement; nothing here is CSI test data, and none of it is legal or regulatory advice. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.

Frequently asked questions

How do I check a new batch of reed diffuser base before using it?
Quarantine it and compare it with a retain of the approved sample: documents and lot number, net weight, appearance, odour, relative density, clarity batches with your oil and a stress oil, and a 3-versus-3 diffusion check weighed for at least 14 days.
How can I measure the density of a diffuser base at home?
Weigh the same measured volume of the new lot and your retain in the same rigid container, filled to the same mark, in the same hour. Compare the two; for QC the difference matters more than the absolute figure.
What documents should I ask a reed diffuser base supplier for?
At minimum the SDS for the product, the lot number and manufacture date, and storage advice; plus any technical data they can provide. CSI's base pages publish none of these on the store, so ask on WhatsApp.
Why does a new lot of diffuser base turn my fragrance cloudy?
It may differ from the approved lot, or the oil lot may have changed, or the test conditions differ. Make the same batch in the new lot and in your retain side by side with the same oil; only a difference between those two points at the base.
How long should I keep retained samples of reed diffuser base?
At least as long as products made from that lot are on sale, and longer if you supply businesses. Keep them sealed in glass, labelled with supplier, lot and date, away from light.
Can I use a new base lot while it is being tested?
Not in production. Keep the lot under a quarantine label and run production on released stock until every check passes your written limits.
New base lot · incoming QC
Quarantine, compare with your retain, test in your formula for 14 days, then release on a written rule.
The CSI side is a QC kit, not a base: Dark Vanilla as a stress oil, Gold bottles for the diffusion check and retains, black fibre reeds, a scale and beakers. If your new lot is ours, ask us for whatever documentation is available before it arrives.
Shop Gold Reed Diffuser Bottles Confirm the QC kit on WhatsApp
Editorial standards & sources
About this guide: part of CSI's series on reed diffuser formulation with DPG, DPM, IPM and Augeo-type carriers, in the cluster on buying materials and scaling (8381–8400). It covers incoming quality control for a new base supplier's lot: documents, receipt, appearance, odour, relative density, clarity and stress batches, a diffusion check, the cause table, retains and release.

Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Dark Vanilla Fragrance, Dark Vanilla Oud, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml) For Uplifting, Mood-Boosting Scents, Luxury Soy Wax CSI 464 (Flakes Form) For Container Candles, Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g). They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Anonymous, Sooraj R, Thenirvaofficial, snehal Chaudhary, Jaya Sawlani. The reviews from SUMAN BISHT are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.

Figures verified 7 October 2026, CSI live pricing: Dark Vanilla Fragrance 15 g ₹130.00, 50 g ₹410.00, 100 g ₹790.00, 500 g ₹3,840.00, 1 kg ₹7,646.00; Silicon Measuring Beaker 100 ML ₹300.00, 250 ML ₹600.00; Candle Making Weighing Scale ₹354.00; Gold Reed Diffuser Bottle pack of 10, 50 ML ₹826.00 (₹82.60 each), 120 ML ₹1,062.00 (₹106.20 each); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 each), 50 ₹400.00, 100 ₹800.00 (₹8.00 each). All in stock on 7 October 2026. CSI's in-stock bases (Pure Performance 100g ₹325.00 / 500 ML ₹1,099.00; Lift, Depth, Softness ₹1,099.00; Longevity ₹1,296.00) publish no composition, density, flash point, SDS or IFRA data on their pages.

Non-price figures: the 5 kg lot, 20% formula, all lot-card readings, the ±1%, ±2% and ±15% limits, the 40 g retains and retention period are worked examples or judgement, not CSI test data. "For reed diffusers, use 10-30% of total diffuser base", the Depth Base wording and the beaker's "clear scales" are quoted from CSI pages. Costs are materials only and exclude labour, freight, packaging and GST. Diwali 8 November 2026 is a calendar fact.
Zurück zum Blog