I Want to Replace Part of the DPG in My Reed Diffuser Formula — Should I Test DPM, an Augeo-Type Solvent or a Commercial Ready-Made Base?
Aktie
How do I choose which to test first? On what you can actually get with an SDS, its odour neat, your cost per bottle and the effort to qualify it. Throw you can only learn from a test. The matrix below is judgement, not performance data.
What does the test look like? Oil fixed at 20 g per 100 g. A: your DPG formula; B: 56 g DPG + 24 g DPM; C: 56 g DPG + 24 g Augeo-type; D: 80 g of a CSI base. Three bottles each, weighed every 2–3 days for 14–30 days, blind sniffs.
What does CSI sell? Only arm D. We don't sell DPG, DPM or Augeo-type solvents. With your own bottles, the CSI side is ₹1,611.00 (three Pure Performance 100g and 75 fibre reeds).
- Straight answer: which to test
- Three routes that answer different questions
- The decision matrix, row by row
- The cause table: what a replacement can and can't fix
- The test: three candidates and your control
- After the test: choosing, safety and the purchase step
- What to buy for this test, and what to skip
- Frequently asked questions
Three routes that answer different questions
Your situation, restated: you have a reed diffuser formula built on DPG, and you want to replace part of the DPG to improve how it performs, most often to lift weak throw. You haven't given the formula, so this page uses a labelled worked example: 20 g oil + 80 g DPG per 100 g, a 120 ml Gold bottle, 5 fibre reeds. "Part" here means 30% of the carrier: 56 g DPG stays, 24 g of a co-solvent goes in, which is 24% of the whole bottle.
DPM (dipropylene glycol methyl ether) is a glycol ether that is generally more volatile and lower in viscosity than DPG. That is why it is a common partner: it speeds release and thins the liquid. Augeo-type solvents are glycerol-ketal solvents marketed for diffusers and fragrance work. Augeo is a brand name of another company, Solvay, so we say "Augeo-type". CSI sells neither, and we quote no flash points, viscosities or evaporation rates for any of them; your supplier's SDS and TDS are the source. A ready-made base is a finished carrier sold for diffusers. CSI sells several, and their pages say "Blend with 10-30% fragrance oil". They are designed to be used as sold.
That last point changes the question. Mixing your DPG into a ready-made base of unpublished composition makes a third liquid that nobody has documented, not even the base's maker. So in this test the ready-made arm replaces all the DPG. If you want part-replacement, DPM and Augeo-type solvents are the candidates. The base answers a different question: is my own carrier worth the effort at all?
The decision matrix, row by row
| Criterion | DPM | Augeo-type | CSI ready-made base |
|---|---|---|---|
| Availability | From chemical or fragrance-material suppliers; pack sizes vary | Fewer suppliers; check it is the grade sold for fragrance use | In stock at CSI on 7 October 2026: 100g sample and 500 ml |
| Documentation | Ask for SDS and TDS before buying | Ask for SDS and TDS before buying | Pages publish no composition, density, flash point or SDS; ask us on WhatsApp what we can obtain |
| Odour | Sniff neat on a strip at 10 min and 1 h | Same | Same |
| Flammability and label | From its SDS; changes the mixture's classification | From its SDS; same | Not on the page; ask, then review your label |
| Cost per 100 g bottle | 56 g DPG + 24 g DPM at your prices | 56 g DPG + 24 g Augeo-type at your prices | About ₹175.84 (80 ml at 500 ML price); ₹260.00 at the 100g price |
| Effort to qualify | Blend, clarity with each oil, stability, SDS review | Same | One liquid; stability with each oil; fewer moving parts |
| Control and repeatability | You set the ratio; lot changes are yours to track | Same | CSI sets the composition; CSI publishes no lot or reformulation notices |
| Your existing DPG | Keeps 70% in use | Keeps 70% in use | Not used |
Three practical readings. If you can get only one documented solvent, test that one. A partial swap with paperwork beats a theoretically better solvent you can't document. If you can't get either with an SDS, the ready-made route may be the honest one, but ask what technical data comes with the base too, including ours. If cost per bottle dominates, a DPG-majority blend will usually be cheaper than a ready-made base, because most of the liquid is your existing DPG. Put your own prices into the cost row before you assume otherwise.
The cause table: what a replacement can and can't fix
Before you buy a co-solvent, make sure the weak throw is a carrier problem. Rows are grouped, not ranked; the evidence column is what you would commonly see, not CSI test data.
| Cause | What you would see | Discriminating check | Fix |
|---|---|---|---|
| Carrier volatility (DPG) | Long life, weak room scent, wet reeds | Any faster arm beats A on weight loss and sniffs | Partial replacement (B, C) or a ready-made base (D) |
| Carrier viscosity | Tips stay dry for hours | Wet-front timing on white reeds (8309) | A lower-viscosity partner; DPM is generally thinner than DPG |
| New solvent's own odour | A sharp or chemical note under the fragrance | Sniff each co-solvent neat on a strip at 10 min and 1 h | Drop that solvent; try the other |
| Solubility / stability | Haze or layers in the new blend | Clear jar at room, warm and cool for 2–4 weeks | Lower the swap, change solvent, or lower oil % |
| Fragrance load and character | Weak in every arm, D included | Same arms with a second, lighter oil | The oil, not the carrier |
| Reeds and bottle | All arms weak; old reeds or jammed neck | Fresh reeds from one pack; one bottle type | Hold constant; fix first |
| Room and climate | Results flip between weeks | Log temperature; all arms side by side | Test in the room the product lives in |
| Process | Blends made by volume; no rest | Remake by weight, rest 24–48 h | Weigh, stir until clear, rest |
| Measurement error | Choice made on day-2 sniffs | Weight log every 2–3 days; blind sniffs days 7–28 | Decide at day 30 |
If reeds, bottle, room and process are already held steady (the usual pattern after the cluster hub’s first test), the carrier rows are the likely ones, and this test addresses them directly. If the tips stay dry for hours, measure rise first with the viscosity post.
The test: three candidates and your control
Fix the oil (same bottle of oil, 20 g per 100 g), the reed pack and count, the 120 ml bottle and the room. Make the swap the same size in both solvent arms, so you compare solvents, not doses. The full scoring protocol for a three-way comparison is the three-arm comparison post; what to measure specifically for DPM is the DPM measurement post. Here is the design.
| Arm | Per 100 g bottle | Source | What it answers |
|---|---|---|---|
| A · control | 20 g oil + 80 g DPG | Yours | Your formula, measured |
| B · DPM | 20 g oil + 56 g DPG + 24 g DPM | Your supplier | Does a faster, thinner partner lift throw? |
| C · Augeo-type | 20 g oil + 56 g DPG + 24 g Augeo-type | Your supplier | Same question, different solvent family |
| D · CSI base | 20 g oil + 80 g Pure Performance (or Lift / Longevity by oil family) | CSI | Is a finished base better than your own carrier? |
Totals: 12 bottles, 240 g of your oil, 576 g of DPG, 72 g each of DPM and the Augeo-type solvent, 240 g of base and 60 reeds. If you can source only one solvent, drop that arm and run three.
After the test: choosing, safety and the purchase step
Safety, plainly. Replacing part of a slow, low-odour solvent with a faster one can change the flammability and hazard classification of the finished liquid. The classification depends on the whole formula, fragrance oil included. Read every SDS, keep stock solvents closed and away from heat and flames, mix in a ventilated room with gloves and eye protection, and keep finished diffusers away from candles and heaters and out of reach of children and pets. Tell customers to avoid skin and eye contact and to wipe spills from polished surfaces. CSI shares MSDS and IFRA documentation for its fragrance oils on request; for our bases, ask what we can obtain. Labelling rules depend on where you sell; this is not legal advice.
| Winner | From your suppliers | From CSI | CSI total |
|---|---|---|---|
| B · DPM | 5,600 g DPG + 2,400 g DPM | 500 reeds (5 × 100) ₹4,000.00, ten Gold 120 ML packs ₹10,620.00 | ₹14,620.00 (₹146.20 a bottle) |
| C · Augeo-type | 5,600 g DPG + 2,400 g Augeo-type | Same reeds and bottles | ₹14,620.00 (₹146.20 a bottle) |
| D · CSI base | Oil only | 8,000 g base: sixteen 500 ML ₹17,584.00 at about 1.0 g/ml; reeds and bottles as above | ₹32,204.00 (₹322.04 a bottle) |
| None beats A | Nothing new | Nothing new | Look at oil, reeds and room |
Weigh 100 ml of any base before you size an order: CSI sells by volume and publishes no density. Before the full run, make the first production batch and weigh three bottles for two weeks against your test numbers. A new lot of DPM or an Augeo-type solvent deserves the same check. For larger base quantities, see whether to buy 1 kg, 5 kg or 25 kg of base when starting; CSI lists no 25 kg pack, so ask on WhatsApp. When you write to any supplier, the request list (composition class, density, SDS, recommended load, lot information) is the specification post.
What to buy for this test, and what to skip
Chosen on page statements, price and stock on 7 October 2026, not performance data. CSI publishes none for its bases or reeds. Pick one base for arm D. Each card says when not to buy.
| Size | Price | Unit price | For this test |
|---|---|---|---|
| 100g | ₹325.00 | ₹3.25 a gram | arm D: 240 g = three packs (₹975.00); ₹260.00 a bottle at this size |
| 500 ML | ₹1,099.00 | ₹2.20 a ml | about ₹175.84 a bottle (80 ml); only after arm D passes |
| Size | Price | Per ml | For this test |
|---|---|---|---|
| 500 ml | ₹1,099.00 | ₹2.20 a ml | arm D for floral, citrus, green, fruity oils; ₹124.00 more than three PP 100g, with about 260 ml left |
| Size | Price | Per ml | For this test |
|---|---|---|---|
| 500 ml | ₹1,296.00 | ₹2.59 a ml | arm D for woody, oriental, resinous oils; about ₹207.36 a bottle (80 ml) |
| Pack | Price | Per reed | For this test |
|---|---|---|---|
| Pack of 25 | ₹236.00 | ₹9.44 | with the 50: 75 reeds |
| Pack of 50 | ₹400.00 | ₹8.00 | 60 reeds for 12 bottles (₹636.00) |
| Pack of 100 | ₹800.00 | ₹8.00 | production |
| Pack of 500 | ₹4,000.00 | ₹8.00 | same per reed as 50: no saving |
| Listing | Price | — | Use |
|---|---|---|---|
| 250 ML | ₹600.00 | — | one 300 g master per arm, by weight |
| 100 ML (separate listing) | ₹300.00 | — | odour and clarity jars |
Skip for now: Depth and Softness as arm D for a weak-throw problem (Depth's page says "Slows evaporation"; Softness's page describes a gentle presence); more than one CSI base in the same test; the CSI HyperDiffusion Base™, out of stock on 7 October 2026; and the Isopropyl Alcohol Spray CSI sells, which is a cleaning product and never a substitute for perfumer's alcohol or a diffuser co-solvent.
CandleMakingSuppliesIndia sells the bases, fibre reeds, bottles and beakers named here. It does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol, and this page says so in the matrix itself. Our base pages publish no composition, density, flash point or SDS in the text we captured, so we can't tell you what solvent our bases contain, and we don't.
Every CSI price was checked on 7 October 2026, with stock checked per variant; everything priced here is in stock on that date, and the CSI HyperDiffusion Base™ is out of stock and not offered. Page wording is quoted and attributed; the review is quoted verbatim.
The matrix is judgement, not performance data; the swap size, arms, bottle counts and thresholds are labelled worked examples. Solvent descriptions are general tendencies with no numeric flash points, viscosities or evaporation rates. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Made a Reed Diffuser Using 80 g DPG and 20 g Fragrance Oil, but the Reeds Are Wet and the Room Has Almost No Smell — Is DPG the Wrong Base for This Formula?
- I Used DPG as My Only Reed Diffuser Base, and the Liquid Level Has Barely Dropped After Two Weeks — Should I Switch to a More Volatile Carrier?
- I Bought 5 Kg of DPG to Make Reed Diffusers, but My First Three Fragrances Have Poor Throw — Can I Test a Compatible Co-Solvent Before Abandoning the Material?
- My DPG Reed Diffuser Lasts Three Months but Doesn’t Fragrance the Room — How Do I Balance Evaporation Rate and Fragrance Throw?
- I Want to Make a 500 g Reed Diffuser Trial with DPG and a More Volatile Compatible Carrier — How Do I Structure the Test Without Changing Multiple Variables at Once?
- I Am Buying a New Reed Diffuser Base Because DPG Isn’t Working — What Technical Specifications Should I Compare Before Ordering Samples?
- I Want to Make a Reed Diffuser Using DPM Instead of DPG — What Differences in Wicking, Fragrance Solubility and Evaporation Should I Measure?
- I Made Three Reed Diffusers Using DPG, DPM and an Augeo-Type Base at 20% Fragrance — How Do I Compare Them Using the Same Bottle and Reeds?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Complete Candle Making Course Kit for Beginners, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Premium Coconut Soy Wax, Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g), Solar Bloom Fragrance Oil. They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Pradeep Kumar Dahiya, Sooraj R, snehal Chaudhary, Thenirvaofficial, Manasa GN. The reviews from T.S. are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.
Figures verified 7 October 2026, CSI live pricing: Pure Performance Reed Base Oil 100g ₹325.00 (₹3.25 a gram), 500 ML ₹1,099.00 (₹2.20 a ml); Lift Base 500 ml ₹1,099.00; Longevity Base 500 ml ₹1,296.00 (₹2.59 a ml); Depth and Softness Base 500 ml ₹1,099.00; CSI HyperDiffusion Base™ ₹1,499.00 (out of stock); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed from 50 up); Gold Reed Diffuser Bottle Pack of 10, 120 ML ₹1,062.00 (₹106.20 each); Silicon Measuring Beaker 250 ML ₹600.00, 100 ML ₹300.00; Isopropyl Alcohol Spray 150 ML ₹383.00 (a cleaner, named only to rule it out). Per unit = pack price ÷ units, two decimals. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol.
Non-price figures: "replace part of the DPG", "DPM", "Augeo-type" and "ready-made base" are the reader's (title). The 20 g oil per 100 g, the 30% swap (56 g + 24 g), 5 reeds, arm and bottle counts and decision thresholds are labelled worked examples. The matrix is judgement, not test data. Review 85 is quoted verbatim; its percentages are the reviewer's. Solvent descriptions are general tendencies; no flash point, viscosity, density or evaporation figure is quoted. Augeo is a trademark of Solvay. "Blend with 10-30% fragrance oil", "neutral, no-additive base", "Slows evaporation" and the 24–48 hour rest are page wording. Base cost per bottle treats 80 ml as 80 g only at a weighed density near 1.0 g/ml. Costs exclude labour, freight, packaging and GST. Diwali 8 November 2026 is a calendar fact.