My Reed Diffuser Formula Works with DPM but Not with IPM — How Do I Determine Whether Solubility, Viscosity or Evaporation Is Responsible?
Aktie
The three tests: Q1, 20 g jars at your load and at 10%, room and cool, for 7 days. Q2, three new reeds per jar, weighed at 1, 3, 6 and 24 hours. Q3, 5 g of each carrier alone in open dishes, weighed daily for 7 days, plus bottle grams a day.
What usually comes out? In general IPM is an oily, very low-volatility ester, so evaporation is a common brake and viscosity a frequent second. Your tests decide for your oil.
What does CSI supply? Not DPM or IPM. Reeds, bottles, a scale, a test oil and an optional base arm: ₹3,155.60 with your own bottles.
- Straight answer: test in order, stop at the first "no"
- Three failure modes, and why the order matters
- The cause table: carrier, oil, reeds, room, method
- The discriminating tests, one per cause
- Confirm in bottles: DPM as the control
- Reading a worked result, and the purchase step
- What to buy for the tests, and what to skip
- Frequently asked questions
Three failure modes, and why the order matters
Passive diffusion is a chain: the fragrance must stay dissolved in the carrier, the liquid must climb the reed, and the carrier must leave the reed tips at a useful rate, taking fragrance with it. DPM clearly does all three for your oil. IPM breaks the chain somewhere, and the three possible breaks look alike from across the room: a faint diffuser.
They don't look alike on the bench. Solubility shows in a jar as haze, droplets or a layer. Viscosity shows as reeds that take up less liquid in a day. Evaporation shows as wet reed tips, a bottle that hardly loses weight, and a carrier that sits in an open dish for a week and barely changes. The order matters because a hazy mix makes the reed and weight readings meaningless, and a liquid that doesn't climb can't evaporate from the tips whatever its volatility.
One more possibility sits outside the chain: the oil itself. If your oil is heavy, IPM may expose a weakness DPM was hiding. That is why the cause table has a row for a second, lighter oil.
The cause table: carrier, oil, reeds, room, method
This describes what makers commonly report, not CSI test data.
| Cause | What you would see | Discriminating check | Fix |
|---|---|---|---|
| Solvent solubility | IPM mix hazy, layered or with droplets; DPM mix clear | Q1: 20 g jars at your load and at 10%, room and cool, 7 days | IPM can't hold this oil at this load; don't bottle it |
| Solvent viscosity (wicking) | IPM clear, but reeds stay pale and dry at the tips for longer | Q2: three reeds per jar, weighed at 1/3/6/24 h, DPM vs IPM | Use IPM only as a minor part, or not at all |
| Solvent volatility (evaporation) | Reeds wet to the tip, bottle barely loses weight, room faint | Q3: 5 g of each carrier alone in open dishes, weighed daily for 7 days; bottle g/day | Volatility is the brake; IPM won't carry fragrance off the tips |
| Fragrance load and oil character | A heavy oil fails in both; a light oil fails only in IPM | Same tests with a second, lighter oil | Separate oil limits from carrier limits before deciding |
| Reed, bottle and fill | IPM bottles disagree; reeds reused from DPM; fills poured by ml | New reeds per arm; fill by weight; same bottle model | Re-run with the method fixed |
| Environment | Both weak in a cool or air-conditioned room | Room log; both arms on one shelf, rotated | Compare arms only on the same day |
| Process and measurement | IPM mix stirred less, made in a DPM-wet beaker, judged by eye | Same vessel cleaning, stir, rest; blind codes; weigh, don't look | One written procedure for both carriers |
The discriminating tests, one per cause
| Test | Set-up | Read | Answers |
|---|---|---|---|
| Q1 · clarity jars | DPM 20%, IPM 20% and IPM 10% in 20 g jars, one at room and one cool for each | Against a printed card at 1 h, 24 h, 48 h, 7 days | Solubility |
| Q2 · reed uptake | DPM 20% and IPM 20%, three 20 g jars each, one new reed per jar | Lift, blot 2 s, weigh at 1, 3, 6, 24 h | Viscosity and wicking |
| Q3 · open dish | 5 g of DPM and of IPM alone, three identical shallow dishes each | Weigh daily for 7 days, same time, same room | Carrier volatility |
| Q3 · tip vs room | Your existing DPM and IPM bottles | Blind sniff at a reed tip, then in a closed room at 1 m | Release versus transport |
Reading Q3 honestly. An open dish exaggerates differences compared with a reed, because the whole surface is exposed, so use it to rank carriers, not to predict bottle life. Keep the dishes identical in shape and fill, on one shelf, away from fans and sun, and log humidity: a humid monsoon week slows every dish. If DPM loses weight steadily and IPM barely moves over seven days, that ranking is robust even if the absolute grams change with the season. If the two dishes are close, evaporation is probably not the brake, and Q2 or the oil deserves a second look. Bottle grams a day remain the number that matters for your product; the dishes only explain them.
The reed-uptake method is borrowed from the slow-wicking sandalwood post, which explains the weighing in more detail. If you want to know whether the IPM version's weight loss is the carrier leaving faster than the fragrance, which can happen in either direction, the faster-but-not-stronger post covers the reasoning.
Confirm in bottles: DPM as the control
Bench tests point to a cause; bottles confirm what a customer would get. Run three bottles per arm, 100 g each by weight, in one bottle model with six new reeds from one pack, codes on the base, on one shelf, rotated at every reading. Weigh every 2–3 days for 14–30 days and sniff blind on days 7, 14, 21 and 28 at the door and at 1 m. Arm C asks the obvious follow-up: if IPM can't be the carrier, can it be a small part of a DPM formula without spoiling it?
| Arm | Per 100 g bottle | Role |
|---|---|---|
| A · DPM (your working formula) | 20 g oil + 80 g DPM | The control: what "working" looks like in grams and scores |
| B · IPM | 20 g oil + 80 g IPM | Only if Q1 passed; otherwise drop it |
| C · DPM with a little IPM | 20 g oil + 70 g DPM + 10 g IPM | Is IPM tolerable as a minor part? |
| D · ready-made base (optional) | 20 g oil + 80 g Pure Performance | Another candidate if you wanted IPM for a reason |
Your carrier totals for both stages: about 545 g of DPM and 401 g of IPM, both from your own supplier. Full weight-log columns are in our live guide on testing over 30 days, and our live guide on fixing a weak diffuser systematically is the wider version when the carrier may not be the only variable.
Reading a worked result, and the purchase step
Here is how a finished sheet might look. The numbers are illustrative, made up to show the method, not CSI test data and not a prediction for your DPM, IPM or oil.
| Test | DPM | IPM | Reading |
|---|---|---|---|
| Q1 jars, 7 days | clear at room and cool | clear at room; slight haze cool at 20%, clear at 10% | Borderline: IPM nearly holds this oil |
| Q2 uptake, 24 h (three reeds) | 2.1 g | 1.4 g (67% of DPM) | Slower, but passes a two-thirds rule |
| Q3 open dish, 7 days (5 g) | 0.9 g lost | 0.05 g lost (5.6% of DPM) | IPM alone barely evaporates |
| Bottle g/day, median of three | 2.8 (about 32 days) | 0.4 (about 225 days) | IPM far below the band |
| Reed tip vs room (blind, day 14) | tips 3, room 3 | tips 3, room 1 | Fragrance reaches the tips; little leaves them |
Reading the example: Q1 is borderline (a cool haze at 20% that clears at 10%), so solubility is a minor problem. Q2 passes the two-thirds rule: IPM climbs more slowly but it climbs. Q3 is the decisive one: IPM alone loses 5.6% of what DPM loses in a week, the IPM bottles sit far below the band, and the reed tips smell while the room doesn't. The fragrance gets up the reed and stays there. In this made-up case the answer is evaporation, with viscosity second, and raising the oil would not have helped.
What it means for your formula. If arm C (a little IPM in DPM) matches arm A on band and throw, you have a use for IPM as a minor modifier; if it drags arm A down, leave it out. Either way the oil cost per bottle is the same: British Rose at 20 g is ₹68.40 from the 100 gm and ₹61.40 at the 1 kg price per gram.
The purchase step. Say the DPM formula (or the winning blend) goes into a first run of 40 bottles: 800 g of oil. British Rose as a 500 gm plus three 100 gm (₹2,619.60) is exactly 800 g; a 1 kg costs ₹448.40 more and leaves 200 g over. Reeds: 240, as two packs of 100 plus a 50 (₹2,000.00). Bottles: four Gold 120 ML packs (₹4,248.00). The CSI side is ₹8,867.60; your DPM comes from your supplier. If the base arm won, add seven Pure Performance 500 ML (₹7,693.00, 3,500 ml): ₹16,560.60. Material costs exclude labour, freight, packaging and GST.
What we don't sell, and what our pages don't say. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol. The only alcohol in our catalogue is an Isopropyl Alcohol Spray, a cleaner, never a diffuser ingredient. Every in-stock CSI base page says "Blend with 10-30% fragrance oil", but none states its composition, density, flash point, SDS or IFRA information in the text we captured, so we never claim a CSI base contains or excludes DPM or IPM, and never claim it always outperforms either.
Safety, plainly. DPM is generally the more volatile of your two carriers and needs the more care around heat and flame; treat every arm as flammable until its SDS says otherwise. Open dishes of carrier should sit away from flames, heaters and food. Wear gloves and eye protection; IPM is oily and makes benches and floors slippery, so wipe spills at once. Keep dishes, jars and bottles out of reach of children and pets. Labelling and courier rules depend on the full formula and where you sell; read every SDS and take advice. This is not legal advice.
What to buy for the tests, and what to skip
Chosen on page statements, price and stock on 7 October 2026, not on performance data; CSI publishes none for its bases, reeds or bottles. Each card says when not to buy.
| Item | Price | Units | Check |
|---|---|---|---|
| One scale | ₹354.00 | grams or ounces (page) | resolution not stated: 0.01 g for reeds and dishes, 0.1 g for bottles |
| Pack | Price | Per reed | For this test |
|---|---|---|---|
| Pack of 25 | ₹236.00 | ₹9.44 | — |
| Pack of 50 | ₹400.00 | ₹8.00 | without the base arm, with a 25 |
| Pack of 100 | ₹800.00 | ₹8.00 | 78 needed, 22 spare |
| Pack of 500 | ₹4,000.00 | ₹8.00 | production only |
| Variant | Price | Each | For this test |
|---|---|---|---|
| 120 ML Pack of 10 | ₹1,062.00 | ₹106.20 each | two packs for 12 bottles |
| 50 ML Pack of 10 | ₹826.00 | ₹82.60 each | only if you sell 50 ml |
| Size | Price | Per gram | For this test |
|---|---|---|---|
| 15 gm | ₹94.40 | ₹6.29 | smell check |
| 50 gm | ₹212.40 | ₹4.25 | not enough |
| 100 gm | ₹342.20 | ₹3.42 | three cover 284 g, 16 g spare |
| 500 gm | ₹1,593.00 | ₹3.19 | ₹566.40 more than three 100 gm |
| 1 kg | ₹3,068.00 | ₹3.07 | cheapest per gram; production only |
| Size | Price | Unit price | For this test |
|---|---|---|---|
| 100g | ₹325.00 | ₹3.25 a gram | three: 240 g needed, 60 g spare |
| 500 ML | ₹1,099.00 | ₹2.20 a ml | ₹124.00 more than three 100g; production size |
Skip for now: any production pack before the bottles read out; a second CSI base; the CSI HyperDiffusion Base™, out of stock on 7 October 2026; the Room & Linen Spray Base and the Ultrasonic Diffusion Concentrate Base™, which are not reed diffuser bases; the 500 reed pack, the same price per reed as the 100.
CandleMakingSuppliesIndia sells the scale, reeds, bottles, oil and base named here. It does not sell DPM, IPM, DPG, Augeo-type solvents or perfumer's alcohol, and this page says so; it also tells you that keeping your working DPM formula may be the right answer.
Every CSI price was checked on 7 October 2026, with stock checked per variant; everything priced here was in stock on that date, and the CSI HyperDiffusion Base™ is out of stock and not offered. Page wording is quoted and attributed to the page.
Solvent behaviour is described as general, hedged tendencies with no numeric viscosities, densities, flash points or evaporation rates. The 20% reading, the thresholds, the band and the 40-bottle run are worked examples; the results table is illustrative; nothing here is CSI test data. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Have DPG, DPM and IPM in My Workshop — Which One Should I Test First as a Reed Diffuser Carrier, and What Properties Should Guide the Choice?
- I Want to Make a Reed Diffuser Using DPM Instead of DPG — What Differences in Wicking, Fragrance Solubility and Evaporation Should I Measure?
- I Mixed IPM with a Floral Fragrance Oil, but the Diffuser Has Poor Room Throw — Should I Investigate Carrier Volatility Before Increasing Fragrance Load?
- I Made Three Reed Diffusers Using DPG, DPM and an Augeo-Type Base at 20% Fragrance — How Do I Compare Them Using the Same Bottle and Reeds?
- My Oud Fragrance Is Clear in DPM but Hazy in My Ready-Made Base — Does This Mean DPM Will Necessarily Give Better Diffusion?
- I Want to Make a Low-Odour Reed Diffuser — How Do I Compare the Carrier Odour of DPG, DPM, IPM and Commercial Bases Before Adding Fragrance?
- I Have Two Commercial Reed Diffuser Bases with Different Solvent Compositions — How Do I Compare Their Performance Without Knowing Every Proprietary Ingredient?
- How Do I Choose Between DPG, DPM, IPM and an Augeo-Type Reed Diffuser Base Using Controlled Tests for Solubility, Wicking, Throw, Evaporation, Stability and Cost?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — British Rose Fragrance Oil, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Jasmine Fragrance Oil, Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml). They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Arshad Shaikh, snehal Chaudhary, Sooraj R. The reviews from Emma Bechara, Ashwini, S.A. are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.
Figures verified 7 October 2026, CSI live pricing: British Rose Fragrance Oil 15 gm ₹94.40 (₹6.29 a gram), 50 gm ₹212.40 (₹4.25 a gram), 100 gm ₹342.20 (₹3.42 a gram), 500 gm ₹1,593.00 (₹3.19 a gram), 1 kg ₹3,068.00 (₹3.07 a gram); Pure Performance Reed Base Oil 100g ₹325.00, 500 ML ₹1,099.00 (₹2.20 a ml); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed from 50 up); Gold Reed Diffuser Bottle Pack of 10, 120 ML ₹1,062.00 (₹106.20 each), 50 ML ₹826.00 (₹82.60 each); Candle Making Weighing Scale ₹354.00; CSI HyperDiffusion Base™ ₹1,499.00 (out of stock). Per unit = pack price ÷ units, two decimals. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol.
Non-price figures: the reader gave no load; 20 g + 80 g per 100 g is our worked reading. Jar sizes, dish weights, time points, the two-thirds rule, the band, the 70/10 blend and the 40-bottle run are worked examples; the results table is illustrative, not CSI test data. Solvent properties are general tendencies; no numeric viscosities, densities, flash points or evaporation rates are quoted. "reed diffusers (10-30%)", "smooth even wicking", "No added fixatives", "Blend with 10-30% fragrance oil", "Superior capillary action", "no swelling, no clogging", "Consistent diffusion from day 1 to day 30" and "grams or ounces" are page wording. Costs exclude labour, freight, packaging and GST. Diwali 8 November 2026 and Christmas 25 December 2026 are calendar facts.