Reed Diffuser Base vs DPG vs Augeo
Reed Diffuser Base vs DPG vs Augeo
Is a ready-made base better than DPG? Not automatically. A ready base saves formulation work; DPG gives you a known single material. Which performs better depends on your oil, so test both.
What is in CSI's diffuser bases? The composition is not published, nor are density, flash point or shelf life. Ask on WhatsApp for whatever documentation is available.
How do I compare carriers fairly? Blend the same oil at the same load in each carrier, rest 24–48 hours, reed identical bottles and log daily weight loss and blind rankings for two weeks.
- Three carriers that are not the same kind of thing
- Decision matrix: which carrier fits which maker
- When buying a ready base is the better decision
- When sourcing DPG or an Augeo-type solvent makes sense
- Running a fair side-by-side trial
- The ready-made arm of your carrier trial: what to buy from CSI
- The straight answer
- FAQ
Three carriers that are not the same kind of thing
Makers often compare these three as if they were rival brands of the same product. They are not. Two are single solvent categories you buy and formulate with yourself; the third is a finished carrier someone else has already formulated.
DPG (dipropylene glycol) is a common glycol carrier used across fragrance work. It evaporates slowly, which helps a diffuser last, but the same slowness means it can wick and release scent slowly through reeds. Many makers find DPG on its own gives a gentle throw and blend it with other solvents to adjust that.
Augeo-type solvents are glycerol-derived solvents marketed specifically for reed diffusers. They are positioned as an alternative to glycol and alcohol carriers. Grades and suppliers differ, so behaviour depends on the exact material you buy.
Ready-made diffuser bases such as the CSI range are pre-formulated carriers. You add fragrance oil inside the published 10–30% range and bottle. The trade-off is transparency: CSI base pages publish no composition, density, flash point or shelf life, and their descriptions ("bloom", "slows evaporation", "musky skin-like finish") are page claims for you to verify.
Decision matrix: which carrier fits which maker
No technical numbers appear below because none of the three can be described honestly with a single figure: solvent grades vary by supplier, and CSI does not publish base data. The matrix compares what you get, what you must do yourself and where each route tends to suit.
| Question | CSI ready-made base | DPG (category) | Augeo-type (category) |
|---|---|---|---|
| Sold by CSI | Yes, five bases | No | No |
| Formulation work needed | Add oil, rest, test | Full: carrier choice, blending, oil ratio | Full: grade choice, oil ratio, often blending |
| Published oil range | 10–30% on every base page | Depends on your supplier and formula | Depends on your supplier and formula |
| Composition known to you | No, not published | Yes, single material | Yes, per supplier data |
| Typical reputation | Convenience; family-matched options | Slow evaporation, can wick slowly | Marketed for diffusers as a glycol alternative |
| Documents | Ask CSI on WhatsApp | From your solvent supplier | From your solvent supplier |
| Best fit | Makers who want to launch and test oils quickly | Makers building their own carrier blend | Makers wanting a named solvent with supplier data |
When buying a ready base is the better decision
A ready-made base makes most sense when your real work is choosing and testing fragrances, not developing carriers. If you are launching a small range, have no lab, or need one consistent starting point across several oils, a finished base removes a whole layer of variables.
CSI's range is split by fragrance family on the product pages, which helps you narrow the first test:
- Pure Performance: clear, no added fixatives, aimed at even wicking. The only one in a 100 g pack.
- Lift: written for floral, citrus, green and fruity families.
- Longevity: written for oriental, woody, resinous and balsamic families.
- Depth: described as adding warmth and slowing evaporation, for chypre, leather, smoky and rich gourmand scents.
- Softness: described as smoothing sharp edges, for soft florals, powdery scents and light gourmands.
Those are positioning statements from the pages, not measured results. Their value is that they tell you which two bases to put side by side first for a given oil.
When sourcing DPG or an Augeo-type solvent makes sense
Arguing against our own sales interest: if your customers, retailers or compliance adviser need a full declared composition of the carrier, a ready base with unpublished composition may not satisfy them. In that case a single declared solvent from a supplier who issues its own documentation is the more defensible route.
The same applies if you want full control: tuning evaporation by blending carriers, matching an existing formula you already sell, or building a house carrier you can reproduce with any supplier. Neither DPG nor Augeo-type solvents are available from CSI, so you would buy them elsewhere and use CSI only for oils, reeds and bottles. That is a perfectly reasonable split.
Running a fair side-by-side trial
The only reliable comparison is your oil in each carrier under identical conditions. Change one thing at a time: same oil, same load, same bottle, same reed type and count, same shelf.
Score each carrier on clarity, grams lost per day, blind ranking and cost. On cost, be careful with units: Pure Performance costs ₹325.00 for 100 g in the small pack, while the 500 ml packs work out to ₹219.80 per 100 ml for Pure Performance and ₹259.20 per 100 ml for Longevity. Because no base density is published, weigh 100 ml of each yourself before comparing per-gram cost. A fresh oil such as Cucumber Green Tea and a woody one will often rank the carriers differently, so trial at least one oil from each family you plan to sell.
The ready-made arm of your carrier trial: what to buy from CSI
CSI can supply the ready-made base, the oil, reeds and bottles for a side-by-side trial. Any DPG or Augeo-type solvent you compare against must come from another supplier. Tap any product image or button to open its product page.






CANDLEMAKINGSUPPLIESINDIA supplies raw materials and equipment, not finished products. This guide separates general making practice from what CSI's product pages state, treats product-page phrases as claims for you to test, and says plainly where CSI does not sell an item or does not publish a figure. Every load, test step and quantity here is a starting point for your own trials, not a guaranteed result.
Prices are live CSI prices checked in November 2026; product pages are authoritative. Larger quantities are shown as multiples of listed packs; ask for a quote rather than assuming a discount.
For bulk quotes, GST invoicing, IFRA and MSDS documents, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- How to Make Reed Diffusers in India
- How to Make Reed Diffusers Without Alcohol
- Why Is My Reed Diffuser Cloudy?
- Reed Diffuser Raw Materials Wholesale India
- How Do I Compare Two Reed Diffuser Bases Using Evaporation Rate, Fragrance Throw, Clarity, Reed Compatibility and Cost per Bottle?
- I want to buy a ready-made reed diffuser base from CSI — how do I compare its compatibility with my existing fragrance oils against my current base?
- My Fibre Reeds Become Saturated but the Fragrance Does Not Spread — Could the Base Be Evaporating Too Slowly?
Customer reviews: Genuine, published Judge.me reviews — Tina Raha (4★, verified); Payal Patel (5★, verified); Renam Dhoundiyal (4★, verified); Sooraj R (5★, verified); Yashvi Shah (5★, verified); Arshad Shaikh (5★, verified). Names, ratings, dates and products as recorded by Judge.me.
Product facts (November 2026, CSI live store): Pure Performance Reed & Car Diffuser Base: 100 g ₹325.00, 500 ml ₹1,099.00 — clear base for even wicking and full fragrance expression · no added fixatives · blend with 10–30% fragrance oil · the only base sold in a 100 g pack. Longevity Reed & Car Diffuser Base: 500 ml ₹1,296.00 — page: built for long-lasting cold diffusion of oriental, woody, resinous and balsamic families · blend with 10–30% fragrance oil. Lift Reed & Car Diffuser Base: 500 ml ₹1,099.00 — page: made to help floral and fresh fragrances bloom and diffuse further · best with floral, citrus, green and fruity families · blend with 10–30% fragrance oil. Cucumber Green Tea Fragrance Oil: 15 g ₹93.22, 50 g ₹176.41, 100 g ₹352.82, 500 g ₹1,663.80, 1 kg ₹3,327.60 — top crisp cucumber and green tea leaves, heart jasmine and hints of lemon, base clean musk and light woods · CSI's only tea-note oil; it is not a white tea oil. Fibre Diffuser Reeds (White): Pack of 25 ₹265.00, Pack of 50 ₹450.00, Pack of 100 ₹900.00, Pack of 500 ₹4,500.00 — length 20.3 cm · diameter not published. Gold Reed Diffuser Bottle (Pack of 10): 50 ml × 10 ₹826.00, 120 ml × 10 ₹1,062.00 — clear glass, gold-tone screw cap · variants are 50 ml and 120 ml (description text says 50 and 100 ml) · CSI sells no 100 ml or 200 ml diffuser bottle.
Assumptions: Percentages are by weight of the finished mix unless stated. Where millilitres are converted to grams, 1 ml is treated as about 1 g for illustration only — weigh your own blend. Every load, test day and quantity is a suggested starting point. Per-unit costs exclude labour, packaging, freight and GST. Product pages are authoritative.