I want to buy a ready-made reed diffuser base from CSI — how do I compare its compatibility with my existing fragrance oils against my current base?

I want to buy a ready-made reed diffuser base from CSI — how do I compare its compatibility with my existing fragrance oils against my current base?

 

Reed and car diffuser bases · October 2026
A fair head-to-head: same oils, same load, same minute, one control arm each.
★★★★★
“Good product👍”
Sooraj RVerified buyer · Jul 2026
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml) For Uplifting, Mood-Boosting Scents
★★★★★
“In past five years of testing and searching for the best candle fragrance I would say I found what am looking for strong fragrance in cold throw and hot throw and you can go for the minimum percentage in candle still it will give amazing smell well done and all the best”
Emma BecharaJun 2026
British Rose Fragrance Oil
★★★★★
“Coffee fragrance is quite strong and feels like yummy”
Arminder KaurVerified buyer · Apr 2026
Roasted Coffee Fragrance | Candle Fragrances
★★★★☆
“Love the quality and scent notes. The lavender scent that I bought is selling fast”
Renam DhoundiyalVerified buyer · Apr 2026
Woody Oud Fragrance Oil
★★★★☆
“Fragrance is awesome. Hot throw is also very good after burn candle.”
AkanshaVerified buyer · Dec 2025
Lavender Fragrance Oil | Candle Fragrances
★★★★★
“Nice product”
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML)
100 g trial pack ₹325.00 · 500 ml base ₹1,099.00 · Longevity 500 ml ₹1,296.00 · prices as published in October 2026
Failed batch · comparing two bases
Eight arms of 25 g, four a side, mixed from the same jugs in the same half-hour. Your side costs nothing new, because the base is already in the workshop — and that is its real advantage. The CSI side of a three-oil comparison is 85 g of base, inside one 100 g trial pack at ₹325.00, with 15 g over.
₹325.00one 100 g trial pack — the whole CSI side of a three-oil test
0.83%of the ₹39,076.00 a 100-bottle run costs
Quick answers
What makes a base comparison fair? Symmetry, and nothing else. The same fragrance oils, at the same load, weighed on the same scale into the same kind of vessel, mixed in the same order at the same temperature within the same half-hour, rested the same time and read on the same schedule in the same light. Add one arm of each base with no fragrance oil at all, so each side has its own clear reference. Any asymmetry you allow becomes the result.
What is my current base worth in this experiment? More than the new one. It is a known quantity with a track record in a product your customers have already bought, its behaviour with your oils at your load is established, and the stock is already paid for. That makes it the reference arm, not the underdog. A new base has to beat something real, and you are holding it.
What does CSI's side bring that a liquid cannot? Four published things, and they are worth naming precisely: a recommended load band of 10% starting, 20% recommended and 30% maximum as a percentage of the total finished blend; a caution at the top of that range on every base page; an instruction to reduce the fragrance percentage and retest if clouding occurs, on four of the five pages; and a stated performance intention per base by fragrance family. That is a published number to test against — which your current supplier may or may not give you.
What is the load convention? CSI's reed and car diffuser base pages state fragrance load as a percentage of the total finished blend: 10% starting, 20% recommended, 30% maximum, with 75% base plus 25% fragrance oil as the typical working blend. So 25 g of oil with 75 g of base is 25%, not the 33.33% you get by dividing the oil weight by the base weight. Both sides of the head-to-head must use the same denominator.
What does the comparison cost? One 100 g trial pack at ₹325.00 covers the whole CSI side of a three-oil test — 85 g against 100 g, leaving 15 g — and your side comes out of stock you own. If all three oils have to be bought as well, three 50 g packs are ₹713.80, so the whole comparison is ₹1,038.80 — 2.66% of the ₹39,076.00 a 100-bottle run costs, and the run is 37.62 times larger.
Short answer
Run the two bases as a matched pair. Pick two or three of your own oils from different fragrance families, and build eight arms of 25 g: each oil at your working load in your current base, each oil at the same load in the CSI base, and one arm of each base with no fragrance oil in it at all. At the published recommended load each loaded arm is 5 g of oil with 20 g of base. Weigh everything on the same scale, mix in the same order at the same temperature within the same half-hour, rest all eight the published 24-48 hours before bottling, and read them in one sitting against a white card. Your current base is the reference, because it is the one with a track record in a product people have already bought, and the CSI base has to beat it on your readings. CSI's side gets no advantage except what its pages actually publish — a 10/20/30% load band as a percentage of the total finished blend, a caution at the maximum, a clarity step-down instruction and a stated performance intention per base by fragrance family — and no solvent identity, safety data sheet, shelf life or compatibility data is published for any base in the range, so the rest of the comparison is two liquids and your own notebook. The CSI side of a three-oil test is 85 g of base against the 100 g in one 100 g trial pack at ₹325.00, leaving 15 g. That pack is 47.86% dearer per gram than the 500 ml pack precisely because it is a testing size, which is exactly why it is the honest first purchase — and 0.83% of the ₹39,076.00 a 100-bottle run costs.
The test is symmetric or it is worthless. Same oils, same load, same bottles, same jug, same minute, same reading schedule. SIDE A — THE BASE YOU USE NOW Arm 1: oil one at your working load Arm 2: oil two at your working load Arm 3: oil three at your working load Arm 4: this base alone, no oil at all Its advantage: a track record in a product your customers have bought. SIDE B — THE CSI BASE Arm 5: oil one, same load Arm 6: oil two, same load Arm 7: oil three, same load Arm 8: this base alone, no oil at all Its advantage: four published numbers you can hold it to. Nothing else. EIGHT ARMS OF 25 g. ONE SIDE OF THREE OILS IS 85 g OF BASE — ONE 100 g TRIAL PACK, 15 g OVER. WHAT THE CSI PAGES PUBLISH A recommended load band, a published maximum with a caution, a step-down instruction if clouding occurs, and a stated performance intention per base by fragrance family. Worth: a number to test against. WHAT NEITHER SIDE PUBLISHES No solvent identity. No safety data sheet. No shelf life. No compatibility table for any oil. So this is two liquids, judged on your own readings plus whatever each supplier chooses to print. THE PURCHASE The 100 g trial pack is dearer per gram than the 500 ml pack — 47.86% dearer — precisely because it is a testing size. That makes it the honest first purchase and the wrong thing to produce from. Your side of the test costs nothing new: the base is already in the workshop, and that is its real advantage.
Four arms a side, one of them a control, and the only asymmetry allowed is what each supplier publishes.
Straight answer
How do I compare a CSI ready-made base against the base I already use, with my own oils?
Build a matched pair and change one thing. Choose two or three of your own oils from different fragrance families — this page works through British Rose, Roasted Coffee and Woody Oud — and make eight arms of 25 g: each oil at your working load in your current base, each oil at the same load in the CSI base, and one arm of each base with no fragrance oil at all. At the published recommended load that is 5 g of oil with 20 g of base per loaded arm, and 25 g of neat base per control arm. Everything else is held still: same scale, same vessels, same order of addition, same stirring, same room temperature, all mixed inside the same half-hour, all rested the published 24-48 hours — the Longevity page's instruction is “Rest the blend 24-48 hours before bottling for maximum stability and longevity.” — and all read in one sitting against a white card at the end of the rest and again at seven days. The CSI side of a three-oil test is 85 g of base against the 100 g in one 100 g trial pack at ₹325.00, leaving 15 g; your side comes out of stock you already own, which is the single biggest advantage either base has in this test. CSI's base gets no credit for anything except what its pages publish, and your base gets no credit for anything except what it has actually done in your product. Then read the eight arms and let them decide.
All loads on this page are stated the way CSI's base pages state them: as a percentage of the total finished blend. Prices are October 2026.
One pack covers the whole CSI side of a three-oil test. Pure Performance 100 g trial pack, ₹325.00 — 100 g of base against the 85 g four arms need, with 15 g over.
100 g trial pack — ₹325.00The five 500 ml bases

What the two live pages own, and what this one does

Two live CSI pages already answer the general version of your question. This page answers the specific one: how to build the comparison.

If your question is how to qualify a new base supplier in the ordinary way — what to ask for, how much to order, how to protect continuity of supply on a product you already sell — that is owned by a live page: how to test a new reed diffuser base supplier before replacing the base used in your existing bestselling products. And if your question is whether to buy base and fragrance oil from the same place to keep compatibility simple, that has its own live page too: buying base and fragrance oil from one supplier. Both are worth reading alongside this page; neither is re-answered here.

What this page owns is narrower and more practical: the design of the comparison itself. Not whether to switch, not how much to buy, not which supplier to trust — how to set up an experiment in which the only thing that differs between two sets of arms is the base, so that whatever you see at the end of it means something. That is a question of arithmetic, symmetry and bookkeeping, and it is the part makers most often get wrong.

It is also the one page in this cluster where CSI is one of the two things being compared, which puts an obligation on it. A comparison written by one of the parties is worth nothing unless it is scrupulously even-handed, so this page gives the CSI base no advantage except what its own product pages actually publish, and gives your current base full credit for the thing it genuinely has: a record of working in a product your customers have paid for. If the test comes out in favour of what you already use, that is a perfectly good outcome and it has saved you a switch.

One honest note on what a comparison like this can settle. It can tell you how two liquids behave with your oils at your load, in your workshop, over the weeks you watch them. It cannot tell you why, because the chemistry of neither base is published anywhere — and it cannot tell you about a lot you have not tested. A base that behaves well in one 500 ml pack is evidence about that pack; the habit that turns it into evidence about a supplier is keeping a retain from every pack and repeating a short arm when a new lot arrives.

Three questions that sound like one
The question Who owns it What it needs
How do I qualify a new base supplier in general? The live CSI supplier-testing page A general protocol and a list of what to ask for
Should base and oil come from the same supplier? The live CSI same-supplier page A procurement decision about simplicity against choice
How do I design a fair head-to-head with my own oils? This page Eight symmetric arms, two control arms, one denominator and a notebook
Why is my current blend cloudy at all? The live CSI compatibility page A diagnosis of the formula you already have
How much base should I then buy? The live CSI bulk-quantity page A quantity decision, after the comparison
Read the first two before you switch supplier. Read this one before you run the test that decides it.

Your current base is the most valuable thing here

You are not starting from nothing. You are holding the only instrument in the room with a service history.

Start by giving your existing base its due, because the temptation in a comparison like this is to treat the incumbent as the problem and the candidate as the solution. The base you use now has something no new base can have: it has been in a product that customers bought, opened, used and did not complain about. You know how it behaves with your oils, at your load, in your bottles, in your climate, over whatever period you have been selling. That is a body of evidence worth more than any specification sheet.

It has a second advantage that matters to the arithmetic: the stock is already paid for. Every arm on your side of this experiment costs you material you own, which means the whole cost of the comparison falls on the CSI side and on any oil you have to buy in a small pack. So the honest framing is not “what will it cost me to test CSI's base against mine” but “what will it cost me to test CSI's base at all”, and the answer is one pack.

Which is exactly why your base is the reference arm and not the challenger. The structure of the test is: here is a known thing, here is an unknown thing, do they differ with my oils at my load. A result in which the CSI base matches your current base is informative — it means you have a second source, which is worth having for continuity whether or not you switch. A result in which it is worse is informative and cheap. A result in which it is better is the only one that justifies a change, and it should have to be visible, not marginal.

Before you weigh anything, write down what you already know about your current base, because half of it will otherwise be reconstructed from memory halfway through the test. Which oils you have run in it. At what load. What the worst behaviour you have seen was, and with which oil. Whether a lot ever behaved differently from the one before. What its supplier publishes — a load figure, a solvent identity, a shelf life, a safety data sheet, anything. And whether you have a retain of the pack you are currently selling from. That last one is the difference between a comparison and an anecdote.

Writing down what you already have
1
List every oil you have run in your current base, with the load you ran it at, expressed as a percentage of the total finished blend.
2
Against each one, record the worst thing you ever saw: clear throughout, a trace of haze, an obvious cloud, a layer, or solids at the bottom.
3
Note any oil you abandoned in that base, and at what load you abandoned it. Those are the interesting arms, not the easy ones.
4
Write down what your current supplier publishes, and what they do not. A load band? A solvent identity? A shelf life? Safety documentation? A lot number on the pack?
5
Take a 25 g retain of the base lot you are selling from now, in labelled glass, before the comparison starts.
6
Decide your working load now and write it down. It is the one number both sides of the test must share.
7
Pick the two or three oils for the test from different published fragrance families, and include at least one that has given you trouble.
The CSI principle
In a two-base comparison, the base you already sell with is the reference. A candidate has to beat a known quantity on your own readings, and a dead heat is still a useful result — it means you have a second source.
And your side of the test costs nothing new, because the stock is already in the workshop. The whole cost of the comparison is the candidate's side.

One denominator, both sides

A load means nothing until you say what it is a percentage of — and the two bases have to be at the same one.

CSI's reed and car diffuser base pages give fragrance load as a percentage of the total finished blend. The published figures are 10% as a starting point, 20% as the recommended working load and 30% as the maximum, with 75% base plus 25% fragrance oil given as the typical working blend and a worked example that reads: for a 100 ml finished diffuser at 25% fragrance, use 75 ml of base and 25 ml of fragrance oil. So a 100 g bottle at the typical blend is 25 g of oil and 75 g of base; at the recommended load, 20 g and 80 g; at the published start, 10 g and 90 g; at the published maximum, 30 g and 70 g.

The candle convention is the opposite — there, load is a percentage of the wax weight — and most Indian diffuser makers came to diffusers from candles. So the commonest recording error in the trade is to divide the oil by the base: 25 g into 75 g reads as 33.33% against the base and 25% against the total finished blend, and at the recommended load the same slip turns 20% into 25%. Both numbers are arithmetically correct. Only the first of each pair can be compared with 10%, 20% and 30%.

In a head-to-head this stops being a bookkeeping nicety and becomes the whole validity of the test. If your own records are kept against the base weight and you weigh the CSI arms against the total blend, the two sides are at different loads and every difference you observe is your arithmetic rather than the base. Convert your existing records first, write both figures down once so the conversion is visible, and then weigh both sides to the same number.

Record grams, not percentages, and let the percentage be derived. Oil weight, base weight, total weight, which base, which oil, which lot of each, the vessel, the room temperature, the mixing order, the rest time, and the reading at each sitting. A percentage without its grams cannot be audited in a month; grams can be re-divided any way you like. And give the two sides the same row structure in the same notebook — eight rows, not two notebooks — because a comparison kept in two places is a comparison nobody will do.

The same 100 g bottle at every published rung
Load, as a percentage of the total finished blend Fragrance oil Base What the pages say about it
10% 10 g 90 g Published starting point for a new oil
20% 20 g 80 g Published recommended working load — the usual place to run a head-to-head
25% 25 g 75 g The typical working blend published on the pages: 75% base, 25% oil
30% 30 g 70 g Published maximum, with a test-thoroughly caution on every page
Divide by the base weight instead and 25% reads as 33.33%, and 20% reads as 25%. Both sides of the comparison use the first column.
Run the comparison at the load you sell at Not at the published recommendation, unless that is also your production load. The question you are answering is whether the CSI base holds your oils where you actually make them, and a comparison run a rung lower than production is a comparison of a product you do not sell. Add the published 20% as an extra pair later if you want it; do not substitute it.

Designing a symmetric head-to-head

Same oils, same load, same bottles, same jug, same minute. Every asymmetry you allow becomes part of the answer.

Eight arms of 25 g, four a side. On each side: oil one at your working load, oil two at your working load, oil three at your working load, and one arm of that base with no fragrance oil at all. At the published recommended load each loaded arm is 5 g of oil with 20 g of base, and each control arm is 25 g of neat base — ₹81.25 at the trial pack rate on the CSI side, or ₹54.95 at the 500 ml rate. The CSI side therefore needs 85 g of base, against the 100 g in one 100 g trial pack, leaving 15 g.

The oil comes out of one decant per oil, not two. Weigh 10 g of each oil into a small clean vessel at the start, and draw both that oil's arms from the same decant within the same few minutes — that is 30 g of oil across the three oils and both sides. If you draw oil one's two arms from the bottle on two different days, you have introduced a variable you cannot see. The same goes for the base on your own side: both the loaded arms and the control come from the same jug, at the same temperature, in the same session.

Then the list of things to hold still, which is longer than makers expect and is the actual content of this page. The same scale, zeroed between every weighing. Vessels of the same size and shape, clean and dry, from the same batch of glass. Oil added to base rather than base to oil, at the same pouring speed. The same number of stirring turns with a clean tool between arms. The same room, the same bench, the same half-hour, and a note of the temperature. The same rest, which is the published 24-48 hours. And one reading sitting at the end of the rest in which all eight arms are looked at together, in the same light, from the same distance.

Scale matters to what fits in the pack, so decide the number of oils before you order. Three oils a side is 85 g of base and fits one 100 g trial pack with 15 g spare. Five oils a side is 125 g of base, which a single 100 g trial pack does not cover — it is 25 g short. Two trial packs at ₹650.00 hold 200 g and leave 75 g, and a 500 ml pack at ₹1,099.00 covers it with room for the bottled stage as well. Pick the number of oils you can afford to read carefully rather than the number you own: eight arms read properly beats sixteen read in a hurry.

The eight arms, in order
1
Label eight clean, clear, straight-sided glass vessels: CURRENT-1, CURRENT-2, CURRENT-3, CURRENT-BASE ONLY, CSI-1, CSI-2, CSI-3, CSI-BASE ONLY. Write both base lots, all three oil lots and the date on every label before weighing.
2
Decant 10 g of each oil into three small vessels. Every arm of that oil is drawn from its own decant.
3
Weigh the six loaded arms to 25 g total each at your working load — 5 g of oil with 20 g of base at the published recommended load — alternating sides so neither side is systematically later than the other.
4
Fill the two control arms with 25 g of neat base each, one per base, no fragrance oil at all.
5
Add oil to base in every loaded arm, at the same pouring speed, and stir the same number of turns with a clean tool. Note the room temperature once at the start and once at the end.
6
Read all eight immediately against a white card, holding each side's control arm beside its own loaded arms. Record three grades only: clear, trace, obvious.
7
Rest all eight the published 24-48 hours at a steady temperature, out of sunlight, standing together. Read again at the end of the rest; this is the published decision point.
8
Read again at seven days: clarity, any film or layer at the surface, any ring at the neck, any solids settled at the bottom, any shift in colour.
9
Photograph all eight together at every reading, in the same light, from the same distance, with the date in the frame.
10
Repeat any pair that disagreed, on its own, before you believe it. One pair is an observation; two is a result.
A vessel has to suit the arm 25 g of liquid wants a small, narrow, straight-sided glass. Spread across the bottom of a 120 ml bottle it is a film, and a film does not show haze. Keep the decorative glass for the bottled stage: a pack of ten 120 ml gold bottles at ₹1,062.00 would bottle eight arms with 2 bottles spare, but it is the wrong vessel for reading clarity. A 100 ml silicon measuring beaker at ₹300.00 is for pouring, not for reading.

What CSI's side brings: four published things, quoted

The CSI base gets exactly one advantage in this test, and it is not a chemical one. It is that four things are written down.

One, a recommended load band. Every reed and car diffuser base page publishes 10% as a starting point, 20% as the recommendation and 30% as the maximum, as a percentage of the total finished blend, with 75% base plus 25% fragrance oil given as the typical working blend. The Longevity page publishes a slightly higher band of its own: “The recommended working ratio is 70-75% Longevity Base with 25-30% fragrance oil.” That gives you a rung to test at that is not one you invented, and a figure a supplier can be held to.

Two, a published maximum with a caution attached to it. The wording differs page by page and is worth quoting from the base you are actually testing: Pure Performance and Depth both say “Test thoroughly before batch production at this level.”, Lift says “Test thoroughly - some oils may cloud at maximum load.”, Softness says “Test thoroughly - some oils may behave differently at maximum load.” and Longevity says “For rich ouds and deep resins in large or commercial spaces. Test thoroughly before batch production.” A published ceiling with a caution on it is more useful than a published ceiling without one, because it tells you where the supplier expects variability to start.

Three, a clarity step-down instruction. Four of the five base pages carry one in their own how-to-use steps, and the wording is the clearest published statement anywhere in the range that compatibility is a property of a pair at a load rather than of a base: Lift says “If clouding occurs, the fragrance oil may not be fully compatible at that load - reduce fragrance percentage and retest.”, Softness says “If clouding occurs, the fragrance oil may not be fully compatible at that load - reduce the fragrance percentage and retest.”, Depth says “If any clouding occurs, reduce fragrance percentage and retest before proceeding to batch production.” and Longevity says “The blend should remain crystal clear. If clouding occurs, reduce fragrance percentage and retest. Heavy oils like oud can cloud at maximum load in some bases.” That is a published protocol for the case your test might produce, and it is CSI's own advice rather than this page's suggestion.

Four, a stated performance intention per base, by fragrance family. The pages name families: Longevity names oriental, amber, woody, resinous, balsamic, spicy and gourmand, and steers the other way too — “Light Florals, Fresh Citrus, Aquatics - use Lift Base instead for brightness and airiness.”; Lift names floral, citrus, green, fruity and aquatic; Depth names complex, layered, gourmand, sweet and spicy; Softness is published for gentle, comforting scents; Pure Performance is positioned as the neutral one, its specification line reading “Fixatives: None - clean base, no additives.” The step from your oil to a family is yours and CSI's editorial judgement, not something printed on an oil's page — this page treats British Rose as a floral, Roasted Coffee as a gourmand and Woody Oud as a resinous, and the pages name all three of those families.

What the CSI pages publish, and what each item is worth in a comparison
Published Where What it is worth to your test
10% start, 20% recommended, 30% maximum, as a percentage of the total finished blend Every base page A rung you did not invent, shared by both sides
75% base plus 25% fragrance oil as the typical working blend, with a worked 100 ml example Every base page An unambiguous denominator
A higher working band of 70-75% base with 25-30% oil The Longevity page A second published rung if your product sits high
A caution at the top of the range, worded per page All five base pages Tells you where the supplier expects variability
Reduce the fragrance percentage and retest if clouding occurs Lift, Softness, Depth and Longevity A published protocol for the outcome your test may produce
A performance intention per base, named by fragrance family Each base page Narrows five candidates to one or two before you spend
A rest of 24-48 hours before bottling The Longevity page The only published duration in the process; sets the reading schedule
One stability sentence, scoped to sweet, spicy and gourmand oils The Depth page The single published claim that one base holds what another may not
The Depth page's sentence is quoted in full in the next section, scoped as the page scopes it. Nothing in this table is a measurement; all of it is a published statement a supplier can be held to.

The one published sentence that goes further than the family map is the Depth page's, and it is quoted whole because it is the only one of its kind in the range: “Sweet, spicy, and gourmand fragrance oils that separate or behave inconsistently in a neutral base perform stably and predictably in the Depth Base.” That is scoped to the sweet, spicy and gourmand families the page itself names, and it makes Depth the published candidate for a gourmand such as the coffee in this page's worked set — with a 25 g arm as the way you confirm it for your own oil at your own load. It does not reach a family the page does not name, so it has nothing to say about the rose or the oud.

Now the even-handed half of that argument. Your current base may publish all four of these things too, or more, or none. If its supplier publishes a load band, a solvent identity, a shelf life and a safety data sheet, that is a real advantage to your incumbent and it belongs in the comparison table you build. The point is not that CSI publishes and others do not — it is that published numbers are the only legitimate asymmetry in this test, and you should list both sides' published claims side by side before you weigh a single gram, then judge everything else on the eight arms.

What CSI does not publish either

If you are hoping a document will settle this, no document exists on either side.

Be clear about the shape of the ground. CSI publishes no solvent identity, no safety data sheet, no flash point, no solubility table and no shelf life for any base in the reed and car diffuser range, and no lot number, certificate of analysis or compatibility data for any fragrance oil. So there is no document anywhere in the catalogue that answers “will this base hold my oil” — which is exactly why a 100 g trial pack exists, and exactly why this page is a protocol rather than a comparison of specifications.

That matters to how you read the previous section. The four published things are real and useful, and they are all statements of intent and instruction rather than disclosures of composition. A load band tells you where the supplier expects the material to work. A family list tells you what it was built for. A step-down instruction tells you what to do when it does not. None of them tells you what is in the bottle, and none of them can be substituted for a reading you take yourself.

So the comparison is, honestly stated, two liquids judged on your own readings, plus whatever each supplier chooses to print. That is less than a maker would like and more than it sounds, because a reading taken on eight symmetric arms is a real measurement of the thing you actually sell. It is also why the arms are symmetric: when neither side's chemistry is disclosed, the design of the experiment is the only source of validity you have.

What you can do is ask, of both suppliers, in writing, and keep the answers. A lot or batch identifier on the pack. A retained sample policy. The fill weight. Whatever safety documentation is held. Whether the formula has changed since your last order. None of that is published on a CSI page, and asking for it is how a small manufacturer builds the change control that a published specification would otherwise provide. If one supplier answers and the other does not, that is a genuine difference between them, and it belongs in your table next to your eight readings.

Published, not published, and what to do about it
What you might want Published in the CSI range? How this page handles it
A load band and a typical working blend Yes, on every base page Quoted, and used as the shared rung
A clarity instruction when a blend clouds Yes, on four of the five base pages Quoted, and used as the protocol if a pair clouds
A rest before bottling Yes — 24-48 hours, on the Longevity page Used as the reading schedule's decision point
A performance intention per base by family Yes, on each base page Used to pick which base to put in the test
Solvent identity or composition No Nothing is inferred; the arms are the evidence
A safety data sheet or a flash point No Ask the supplier, in writing, and keep the answer
A shelf life for a base No Keep a dated retain from every pack; that is your ageing record
A compatibility table for oil against base No The eight arms on this page are the substitute
A lot number on the pack No Ask; a lot identifier turns a shelf of retains into a dated series
Where nothing is published, this page gives a test you run or a question you ask. That rule is why there are no estimated figures anywhere on it.
If the test sends you to a family-matched base, the smallest pack is 500 ml. Depth ₹1,099.00 · Lift ₹1,099.00 · Softness ₹1,099.00 · Longevity ₹1,296.00.
Lift Base 500 ml — ₹1,099.00Longevity Base 500 ml — ₹1,296.00

Reading the pairs: what each pattern licenses

The result is not a winner. It is a pattern across six pairs and two control arms, and each pattern licenses a different next move.

Read each oil as a pair, then read the pairs together. Oil one in your base against oil one in the CSI base, at the same load, at the same reading. If both are clear, that oil is indifferent to the base and tells you nothing about the switch — which is itself worth knowing, because it means the decision will be made by the other oils. If one is clear and the other is not, you have a difference, and the control arms tell you whether to believe it.

The control arms carry more weight than makers expect. A base that is not perfectly clear on its own cannot be judged on a loaded arm, and a faint haze in the neat base will otherwise be attributed to whichever oil was in the vessel. So read each side's control first, and if either one shows anything other than clear, stop and sort out the base, the vessel or the glass before you read a loaded arm. Two clear controls are what licence the six loaded readings.

The commonest real outcome is a split: one base holds two of your oils better and the other holds the third better. That is not a failure of the test — it is the family map showing up in your own workshop, and it is the result that most often changes a maker's product plan rather than their supplier. A split tells you to consider running two bases for two families, which is a range-level decision owned by a live page: one compatible base in bulk, or different bases for different fragrance families.

And if a pair clouds on the CSI side, the published instruction is to step the load down and look again rather than to abandon the base — Lift's wording is “If clouding occurs, the fragrance oil may not be fully compatible at that load - reduce fragrance percentage and retest.” So add one arm at the published recommended 20% if you were testing higher, or at the published starting 10% — 2.5 g of oil with 22.5 g of base — and keep the control arms on the bench. Do the same on your own side if it clouds there, because a step-down that is only applied to one side is another asymmetry.

Six pairs, two controls, and what each pattern licenses
Your base The CSI base What it means What it licenses
Clear Clear That oil does not discriminate between the two bases at your load Decide on the other oils; a dead heat still gives you a second source
Clear Trace or obvious The candidate is worse for that oil at that load Step the candidate's load down and re-read before concluding anything
Trace or obvious Clear The candidate is better for that oil at that load Repeat that one pair, then consider the switch for that oil
Trace or obvious Trace or obvious The pair at that load is the problem, not either base Step both sides down, or read the live compatibility page
Mixed across oils Mixed across oils A split result, by fragrance family A range decision — one base or several
Control not clear — Your base or your vessel, not the oil Fresh glass, fresh control, read again before judging any loaded arm
— Control not clear The candidate pack or your vessel Fresh glass, fresh control; if it repeats, that is a finding about the pack
Nothing in this table measures throw, strength or bottle life. For those, bottle a pair and read it over weeks — and generate the numbers yourself, because none are published.

When the small arms have settled it, bottle one pair and watch it. Two finished 100 g units at your working load — one in each base, same glass, same reeds, same room — are 160 g of base and 40 g of oil between them. Run that off a 500 ml pack: the CSI side's four small arms plus both bottled units are 245 g against the 500 g in the pack, leaving 255 g, which is 3.19 more 100 g bottles' worth at the recommended load, or 3 whole bottles. One 120 ml gold bottle is ₹106.20 and five white fibre reeds are ₹45.00, so the bottled stage is ₹781.52 with the base at ₹351.68 and the oil at ₹127.44.

The trial pack, and why it is dearer per gram

The testing size costs more per gram than the production size. That is the point of it, and it is worth saying out loud.

Pure Performance is the only base in the range with two pack sizes, which makes it the only one with a per-unit ladder: ₹325.00 for 100 g and ₹1,099.00 for 500 ml. Per 100 units that is ₹325.00 against ₹219.80, and per kilogram ₹3,250.00 against ₹2,198.00. The small pack is therefore 47.86% dearer per gram — a gap of ₹1,052.00 a kilogram, or ₹105.20 per 100 units.

That premium is the honest shape of a testing size, and it is the reason the pack exists. A hundred grams is enough to run four arms of 25 g with 15 g spare, and not enough to make a batch, so buying it commits you to nothing and tells you what you need before you commit to anything. A maker who buys the 500 ml pack to save the premium has spent ₹1,099.00 to answer a question that ₹325.00 answers, and is now holding 80 g of base per bottle's worth of material they may not use.

The reverse is also true and equally worth saying: do not produce from the trial pack. At ₹3,250.00 a kilogram against ₹2,198.00, every bottle made from a trial pack carries the testing premium into your cost of goods. One 500 ml pack fills 6.25 100 g bottles at the recommended load — 6 whole bottles — or 5.56 at the published starting load, because a lower load means more base per bottle and so fewer bottles from the same pack. Both legs of that move matter when you cost a step-down.

If the test points at one of the family-matched bases rather than the neutral one, the smallest pack available is 500 ml: Depth ₹1,099.00, Lift ₹1,099.00 and Softness ₹1,099.00 are all the same price as Pure Performance's 500 ml, and Longevity is ₹1,296.00, which is ₹39.40 more per 100 ml and ₹2,592.00 a kilogram. There is no 100 g trial size of those four, so a head-to-head against one of them starts at a 500 ml pack — which still covers the four small arms and both bottled units with 255 g left.

The pack ladder, and what each pack is for
Pack Price Per 100 units Per kilogram What it is for
Pure Performance 100 g ₹325.00 ₹325.00 ₹3,250.00 Four arms of 25 g with 15 g spare. Testing only
Pure Performance 500 ml ₹1,099.00 ₹219.80 ₹2,198.00 6 whole 100 g bottles at the recommended load
Depth 500 ml ₹1,099.00 ₹219.80 ₹2,198.00 Published for complex, layered, gourmand, sweet and spicy
Lift 500 ml ₹1,099.00 ₹219.80 ₹2,198.00 Published for floral, citrus, green, fruity and aquatic
Softness 500 ml ₹1,099.00 ₹219.80 ₹2,198.00 Published for gentle, comforting scents
Longevity 500 ml ₹1,296.00 ₹259.20 ₹2,592.00 Published for oriental, amber, woody, resinous, balsamic, spicy and gourmand
Four of the five 500 ml packs hold the same ₹219.80 of base per 100 ml; Longevity is ₹39.40 more per 100 ml. Only Pure Performance has a 100 g size, so it is the only base with a quantity break to read at all.

What the head-to-head costs against a production run

The case for running the test is arithmetic, not prudence.

Add the test up. The CSI side is one 100 g trial pack at ₹325.00, which covers 85 g of base with 15 g over. Your side is 85 g of base you already own. The oil is 30 g across three oils and both sides — 10 g each — and if you have all three in stock that costs you nothing new. If you have to buy them, three 50 g packs of British Rose, Roasted Coffee and Woody Oud are ₹713.80 together — and the arms draw only ₹142.76 of oil out of them, so most of that money stays on the shelf. With the packs bought, the whole comparison tops out at ₹1,038.80.

Now the thing it decides. One finished 100 g bottle at the recommended load is ₹239.56 of raw material — ₹175.84 of base and ₹63.72 of oil — plus a ₹106.20 bottle and ₹45.00 of reeds, so ₹390.76 a unit and ₹39,076.00 for a 100-bottle run. The trial pack alone is 0.83% of that run and 1.85% of the ₹17,584.00 of base in it; the base in that run is 54.1 times the trial pack, and the whole run is 120.23 times it. With the three oil packs bought the comparison is 2.66% of the run, which is 37.62 times the comparison.

Add the bottled stage and the figures barely move. Two finished units in the two bases, with bottles and reeds, are ₹781.52, so the comparison plus the bottled pair is ₹1,820.32 — 4.66% of a 100-bottle run, which is 21.47 times the whole programme. There is no version of this arithmetic in which the test is the expensive part, and that is the only argument this page needs to make about whether to run it.

One trap in the run itself, because it is the figure a maker plans against. A 100-bottle run at the recommended load needs 8,000 g of base, and sixteen 500 ml packs hold 8,000 g — exactly, with nothing to spare. A spill, a wet jug or a short fill means opening a seventeenth pack, so there is no margin at all in a sixteen-pack plan. Those sixteen packs are ₹17,584.00 and 16 kg on the courier's scale: the cheapest published route at that weight is 4 parcels of 4 kg at ₹1,440.00, against ₹2,400.00 as a single parcel — a difference of ₹960.00. Those weights are the bases only.

The comparison, costed against what it decides
Stage What it consumes Cost What it settles
Your side — four arms 85 g of base you already own Nothing new The reference: how your base behaves with these three oils, written down
The CSI side — four arms 85 g of base from a 100 g trial pack ₹325.00 Whether the candidate matches, beats or loses to the reference
The oil, both sides 30 g across three oils Nothing if in stock; ₹713.80 as three 50 g packs Family coverage — a floral, a gourmand and a resinous
The whole head-to-head Both sides, with the three 50 g oil packs bought at ₹713.80 ₹1,038.80 2.66% of a 100-bottle run
The bottled pair 160 g of base, 40 g of oil, two bottles, ten reeds ₹781.52 How two finished units behave over weeks
Everything The arms, the oil packs and the bottled pair ₹1,820.32 4.66% of the run
The run it decides — 100 bottles 8,000 g of base, 100 bottles, reeds ₹39,076.00 21.47 times the whole programme
The sixteen packs that make up that run's base hold 8,000 g exactly, with nothing to spare — order a seventeenth if you want room for a spill.
The CSI principle
A fair comparison is cheap and an unfair one is worthless, so spend the money on symmetry rather than on scale. Four arms a side, read properly, beats sixteen read in a hurry.
₹1,038.80 of comparison against a ₹39,076.00 run. The only legitimate asymmetry between the two sides is what each supplier publishes.

Buying in sequence, and what not to buy yet

One small pack, a reading, then a bottled pair, then a decision. Nothing in bulk until the arms have been read.

Purchase one is a single pack and a possible oil top-up. The Pure Performance 100 g trial pack at ₹325.00 covers the whole CSI side of a three-oil test with 15 g spare, and it is the right pack even if the base you eventually want is one of the others — a neutral base is a reasonable first candidate precisely because its page positions it for testing. If you already know from the family map which base you want, buy its 500 ml pack instead and accept that it also covers the bottled stage.

On oil, buy small. If you need to top up, the 50 g packs are the right size: British Rose ₹212.40, Roasted Coffee ₹230.00, Woody Oud ₹271.40, Lavender ₹270.00, Citrus Lemon ₹170.00. A 15 g pack of British Rose at ₹94.40 is cheaper still if all you want is both arms of one oil. Read each ladder before buying anything larger, because the shapes differ: British Rose's best rate among the packs this page quotes is ₹3,068.00 a kilogram at the 1 kg, Roasted Coffee's is ₹3,738.00 at the 1 kg, Lavender's is ₹5,400.00 at the 50 gm, and Citrus Lemon's is ₹2,840.00 at the 500 gm. Woody Oud holds the same ₹4,531.20 a kilogram at its 100 g, 500 g and 1 kg packs alike, so for that oil a bigger pack buys quantity rather than a better rate.

Purchase two waits for the reading. A 500 ml pack of whichever base won, a pack of ten 120 ml gold bottles at ₹1,062.00 if you need the glass, and reeds — and read the reed ladder too, because “buy the biggest pack” is false here. A pack of 25 white fibre reeds is ₹265.00, which is ₹10.60 a reed; the best rate among the packs this page quotes is ₹9.00 a reed at the Pack of 50, and it is flat from there, so the pack of 100 at ₹900.00 and the pack of 500 buy no better rate than the pack of 50 at ₹450.00.

Three things not to buy during the comparison. Not a kilogram of base, because the whole point of the exercise is that you do not yet know which base you want. Not a kilogram of any oil, because a pair that does not survive the test leaves you holding the oil as well as the question. And not a second candidate base at the same time unless you can read both against the same reference in the same sitting — three-way comparisons sound efficient and read badly, because the reference arm gets looked at third and your eye has already made up its mind.

Shipping, for the bases only. The trial pack is 0.1 kg packed and travels in the lightest published Standard band at ₹80.00; a 500 ml pack is 1 kg at ₹110.00, two of them at ₹180.00. The sixteen packs behind a 100-bottle run are 16 kg and ship cheapest as 4 parcels at ₹1,440.00 rather than ₹2,400.00 as one, which is ₹960.00 saved by splitting — worth checking at the weight you actually order rather than assuming one parcel is cheaper. Oil packs are not quoted for freight on this page.

1
Purchase one — the candidate's four arms
Pure Performance Base, 100 g trial pack — ₹325.00
The whole CSI side of a three-oil head-to-head: 100 g in the pack against 85 g for four arms, leaving 15 g. At ₹3,250.00 a kilogram it is 47.86% dearer per gram than the 500 ml pack at ₹2,198.00 — ₹1,052.00 a kilogram more — which is the honest price of a testing size. Its page positions it as the neutral base, with the specification line “Fixatives: None - clean base, no additives.” and the colour note “Crystal clear appearance works with any label design and shows off coloured fragrance blends beautifully in glass bottles.”
100 g ₹325.00 · 500 ml ₹1,099.00 · per 100 units ₹325.00 against ₹219.80
Five oils a side would need 125 g — 25 g more than one pack holds. Two packs at ₹650.00 leave 75 g.
2
If the family map picks the base for you
Lift ₹1,099.00 · Depth ₹1,099.00 · Softness ₹1,099.00 · Longevity ₹1,296.00
Lift's page names floral, citrus, green, fruity and aquatic, and its colour note reads “Easy to blend and bottle - shows off coloured fragrance oils beautifully and works cleanly with any glass diffuser vessel.” Depth names complex, layered, gourmand, sweet and spicy. Softness is published for gentle, comforting scents. Longevity names oriental, amber, woody, resinous, balsamic, spicy and gourmand, and on Indian conditions its page says “Does not evaporate too fast in Indian summer heat or fade too soon in humidity. Consistent diffusion performance across the range of temperatures that Indian homes, offices, and cars experience.” There is no 100 g size of any of the four, so a head-to-head against one of them starts at 500 ml.
Four at ₹219.80 per 100 ml · Longevity at ₹259.20, which is ₹39.40 more
One 500 ml pack covers four small arms and both bottled units — 245 g against 500 g, leaving 255 g.
3
The three worked oils, one per family
A floral, a gourmand and a resinous in CSI's classification, which between them touch three of the families the base pages name. Both arms of one oil take 10 g, so a 50 g pack leaves 40 g after one oil's pair. British Rose runs 15 g ₹94.40 · 50 g ₹212.40 · 100 g ₹342.20 · 500 g ₹1,593.00 · 1 kg ₹3,068.00, with its best quoted rate ₹3,068.00 a kilogram at the 1 kg against ₹3,186.00 at the 500 g — 3.85% dearer per kilogram.
Coffee 50 g ₹230.00 · 100 g ₹390.00 · 1 kg ₹3,738.00. Oud 50 g ₹271.40 · 100 g ₹453.12 · 1 kg ₹4,531.20
Add Lavender at ₹270.00 for 50 g or ₹540.00 for 100 g, and Citrus Lemon at ₹170.00, if you want five oils a side.
4
The bottled stage, after the arms
120 ml gold bottles, pack of 10 ₹1,062.00 · white fibre reeds from ₹265.00
Two finished 100 g units, one per base, read over weeks: ₹781.52 with the bottles and ten reeds. One 120 ml bottle is ₹106.20; the 50 ml pack is ₹826.00, ₹82.60 each. Five reeds are ₹45.00 at the pack-of-50 rate, and the best rate among the packs this page quotes is ₹9.00 a reed from the Pack of 50, flat above it.
Reeds: 25 ₹265.00 · 50 ₹450.00 · 100 ₹900.00. Beaker: 100 ml ₹300.00
One finished 100 g unit at the recommended load is ₹390.76, of which ₹239.56 is raw material.

If your next question is quantity rather than comparison, the live CSI pages own it: 1 kg, 5 kg or 25 kg when starting a small fragrance business, how much base a hundred 100 ml bottles at a 20% load need, comparing ready-made base prices per kilogram against bottle yield and developing a 100 g trial formula and scaling it. For the load-economics question there is the most economical fragrance percentage, and for the general pre-purchase case testing fragrance oil compatibility before buying 1 kg or 5 kg. Background sits in the guide to reed diffuser bases, the Pure Performance buyer's guide and reed diffusers 101. Sibling pages in this series cover requalifying an oil whose supplier has changed its formula, and taking a settled 100 g formula up to a 10 kg batch.

Give the candidate nothing except what its own page publishes, and give the base you already sell with full credit for having worked. Then read eight arms in one sitting and let them answer.
— built on the published 10%, 20% and 30% loads and the published 24-48 hours rest, October 2026
Why trust this page
This page compares a CSI product with a product CSI does not sell, so it is written to give the CSI base no advantage except what its own product pages publish. Every price here is read from the live CANDLEMAKINGSUPPLIESINDIA catalogue in October 2026 and recomputed by a validator before publication. The 10%, 20% and 30% loads, the typical 75% base with 25% fragrance oil working blend, the worked 100 ml example, the Longevity page's 70-75% working band, each base page's caution at the top of the range, the clarity step-down instruction on the Lift, Softness, Depth and Longevity pages, the published fragrance families for each base, the Longevity page's note on Indian heat and humidity, the Pure Performance and Lift colour notes and the Depth page's stability sentence are quoted from CSI's reed and car diffuser base product pages, with load stated as a percentage of the total finished blend. Classifying a particular oil into one of those families is CSI's editorial judgement and is stated as such rather than attributed to a page. CSI publishes no solvent identity, safety data sheet, flash point, solubility table or shelf life for any base, and no lot number, certificate of analysis or compatibility data for any fragrance oil, so this page offers no composition claim for either side of the comparison and presents everything of that kind as a question to put to a supplier or a reading you take yourself. Pack coverage, bottle yields and piece counts are checked with coverage helpers against the published pack sizes; where a pack does not cover a requirement, or covers it exactly, this page says so and names the consequence. Shipping is quoted for the bases only, from the live CSI delivery profile at the stored packed weight, and the cheapest published parcelling is computed rather than assumed. General supplier qualification and the same-supplier procurement question are answered on separate live CSI pages, linked above, and are not re-answered here. Customer reviews are real Judge.me reviews on the products linked beside them, reproduced verbatim. Supplied by CANDLEMAKINGSUPPLIESINDIA · WhatsApp +91 7397976926.

Frequently asked questions

How many of my oils should go into the comparison?
Two or three, from different published fragrance families, including at least one that has given you trouble. Three oils a side is 85 g of base, which one 100 g trial pack covers with 15 g spare. Five oils a side is 125 g, which a single trial pack does not cover — it falls 25 g short, so you would need two packs at ₹650.00 (holding 200 g, leaving 75 g) or a 500 ml pack. Pick the number you can read carefully in one sitting rather than the number you own.
Is it fair to compare a 100 g CSI trial pack against a base I buy in bulk?
For compatibility, yes: a gram of base behaves as a gram of base, and the arms are weighed to the same load from both. For cost, no — and you should not. Compare the candidate's production pack price against your current production price, not the trial pack's. The trial pack is ₹3,250.00 a kilogram against the 500 ml pack's ₹2,198.00, 47.86% dearer per gram, because it is a testing size. Use it to settle compatibility and use the 500 ml rate to settle cost.
What if both bases perform identically?
That is a useful result, not a wasted test. It means your oils do not discriminate between the two at your load, so the decision moves to price, pack sizes, freight, lead time, what each supplier publishes and whether having a second qualified source is worth something to you. For a maker who has ever been caught by a supplier going quiet, a qualified second base is worth a good deal on its own.
Do I really need an arm of each base with no oil in it?
Yes, and it is the cheapest arm in the test — ₹81.25 of base at the trial pack rate, or ₹54.95 at the 500 ml rate. It tells you what clear looks like in your glass, in your light, with your eyes, for that specific base. Without it a faint haze that was in the base from the start gets blamed on an oil, and a slightly hazy loaded arm gets waved through because nothing clearer was in the room. Two clear controls are what make the six loaded readings worth reading.
Does CSI publish anything that would let me skip the test?
No, and neither does anyone else. CSI publishes a load band, a caution at the maximum, a clarity step-down instruction and a performance intention per base by fragrance family — all useful, all statements of intent rather than disclosures of composition. No solvent identity, safety data sheet, flash point, solubility table or shelf life is published for any base, and no compatibility data for any oil. That is exactly why a 100 g trial pack exists, and why this page is a protocol.
What does the whole comparison cost?
₹325.00 if you have the oils, because your own side comes out of stock you already own — the arms draw only ₹142.76 of oil, and that comes off stock. ₹1,038.80 if all three oils have to be bought as 50 g packs at ₹713.80. Add the bottled pair, with two 120 ml bottles and ten reeds, and it is ₹1,820.32 all in. Against a 100-bottle run at ₹39,076.00 that is 4.66%, and the run is 21.47 times the whole programme. The test is not the expensive part of this decision.
Next step
Buy one pack and run both bases together
One 100 g trial pack at ₹325.00 is the whole candidate side of a three-oil head-to-head — 85 g of base against 100 g, with 15 g over. Your side costs nothing new. Read all eight arms in one sitting at the end of the published 24-48 hours rest, and let them decide.
Pure Performance 100 g trial pack — ₹325.00Ask CSI on WhatsApp
Editorial standards and sources
Prices, pack sizes and stock read from the CANDLEMAKINGSUPPLIESINDIA Shopify catalogue, October 2026, and recomputed by a validator before publication. Published fragrance loads, the typical working blend, the worked 100 ml example, the Longevity working band, the blending and clarity steps, each base page's caution at the top of the range, the published family lists, the colour notes, the Indian-climate note and the Depth page's stability sentence are quoted from the CSI reed and car diffuser base product pages, with load stated as a percentage of the total finished blend. Classifying an individual oil into a published family is CSI's editorial judgement and is stated as such. Where no figure is published — a solvent identity, a safety data sheet, a flash point, a solubility table, a shelf life, a lot number, a certificate of analysis, a compatibility table, a throw figure or an observation window beyond the published rest — this page gives a protocol you can run or a question to put to a supplier rather than an estimate, and it makes no composition claim about either base in the comparison. Pack coverage, bottle yields and piece counts are verified with coverage helpers against the published pack sizes. Shipping rates are quoted from the live CSI delivery profile for the stated parcel weight, for the bases only, and nothing above the heaviest published band is extrapolated. General supplier qualification and the same-supplier question are answered on separate live CSI pages, linked above. Customer reviews shown on this page are real Judge.me reviews on the products linked beside them, reproduced verbatim. Supplied by CANDLEMAKINGSUPPLIESINDIA · WhatsApp +91 7397976926.
Back to blog