My DPG Reed Diffuser Has Almost No Weight Loss After Ten Days — How Do I Run a Controlled Evaporation Test to Compare Alternative Bases?
Share
Why the controls? They tell you whether the oil, the reeds or the carrier is holding the weight loss down. A sealed reference bottle, weighed first at every reading, tells you whether your scale is drifting.
What do I calculate? Grams a day per bottle from day 7 onwards, the arm's median, and how many days a fill would last at that rate. Compare that with the life you want to sell.
What does CSI supply? Not DPG. Pure Performance 100g ×3 ₹975.00 for the base arm and fibre reeds 50 + 25 ₹636.00: ₹1,611.00 with your own bottles and scale.
- Straight answer: measure properly, then compare
- Is it the diffuser or the scale?
- The cause table: measurement, carrier, oil, reeds or room
- Setting up the controlled evaporation test
- The data sheet and the grams-a-day maths
- Interpreting the arms against each other
- What to buy for this test, and what to skip
- Frequently asked questions
Is it the diffuser or the scale?
Your situation, restated: a DPG-based reed diffuser with almost no weight loss after 10 days. You haven't given the figures, so this page uses an illustrative case: a 100 g fill, 6 fibre reeds, a 120 ml Gold bottle, and a reading of 1.0 g lost in ten days: 0.10 g a day. At that rate a 100 g fill would last about 1,000 days. Before you act on that, find out whether you can trust it.
| Scale reads to | Smallest g/day you can tell apart | Good enough for this test? |
|---|---|---|
| 1 g | about 0.20 g a day | No: a slow DPG diffuser can sit entirely inside that |
| 0.1 g | about 0.02 g a day | Usually, over 14–28 days |
| 0.01 g | about 0.002 g a day | Yes; check the capacity covers a filled bottle |
Argued against our own interest: CSI's Candle Making Weighing Scale page states no resolution and no capacity. It is a mixing scale. If your check shows it reads only whole grams, don't use it for this test; use a 0.01 g scale, wherever you buy it. Then there is the second trap: weighing the wrong thing. Fresh reeds soak up liquid in the first day or two, so the liquid level drops while nothing has left the bottle. If you judged "loss" from the level, or weighed the liquid without the reeds, your number is wrong in both directions. Always weigh the assembled diffuser: bottle, liquid and reeds. Only evaporation reduces that total.
The cause table: measurement, carrier, oil, reeds or room
Rows are grouped, not ranked; "what you would see" is a common pattern, not CSI test data. The arms and controls in the next section are built to separate them.
| Cause | What you would see | Discriminating check | Fix |
|---|---|---|---|
| Measurement: scale resolution | Readings jump by whole grams or not at all; the sealed reference "changes" | Weigh a known weight five times; weigh the sealed reference at each reading | A finer scale; weigh the whole diffuser, not the liquid level |
| Measurement: what you weighed | Level dropped on day 1 but weight didn't; or you weighed only the liquid | Weigh bottle + liquid + reeds together every time | Assembled-diffuser weights; ignore days 0–3 |
| Carrier volatility (DPG) | Arm A close to arm D; both close to arm E; reeds wet | Arm B (same oil, CSI base) loses clearly more | A partial co-solvent or a ready-made base, tested |
| Fragrance composition and load | Arm A well below arm D (the oil slows DPG further) | A vs D, same reeds and DPG lot | Load or oil choice; see the load posts |
| Reeds | Arm D barely above arm E: reeds add little surface | Fresh reeds from one pack; reed count noted | Fresh reeds; reed count within the page's 6–8 |
| Bottle and neck | Narrow neck, cap partly on, reeds jammed | Same bottle and opening for every arm | One bottle type; cap off during the test |
| Room and climate | All arms slow in a cool AC room; faster near a window | Min/max thermometer and humidity log at each reading | Test in the room the product will live in |
| Process | Bottles within an arm disagree widely | Fill weights, reed handling and mixing logged | One master per arm, fills by weight |
A real review on our store shows how often weak throw and a DPG-heavy formula arrive together. Pradeep Kumar Dahiya, reviewing Solar Bloom Fragrance Oil (5★, verified), wrote: "Fragrance is great but May be my formula for reed diffuser is 60% dpg 20% isopropyl myristate 10% perfume oil and 10% ethanol perfume grade. But throw of scent is low. Can you fix this formula." A formula like that one, with IPM, an oily, very low-volatility ester, alongside DPG, is exactly the kind where a weight log is the first thing to ask for. It turns "throw is low" into a number you can compare when you change one ingredient.
Setting up the controlled evaporation test
| Arm | Liquid | Reeds | Question it answers |
|---|---|---|---|
| A · control | your formula (worked: 20 g oil + 80 g DPG) | 6 fresh fibre | Your real grams a day, measured properly |
| B · CSI base | 20 g of the same oil + 80 g Pure Performance | 6 fresh fibre | Does a ready-made base lose more, with the same oil? |
| C · your alternative | the same oil in your own co-solvent blend or second base | 6 fresh fibre | Optional: your own candidate, measured the same way |
| D · DPG + reeds | 100 g DPG, no oil | 6 fresh fibre | What do DPG and these reeds do without the oil? |
| E · DPG, open | 100 g DPG, no oil, cap off | none | How much leaves from the open surface alone? |
| R · reference | any liquid, cap sealed | none | Is the scale or the routine drifting? |
The data sheet and the grams-a-day maths
One row per bottle per reading. Keep the sheet next to the scale and write the number before you look at the previous one; it is easy to "see" the figure you expect.
| Column | What you write | Why |
|---|---|---|
| Date, time, day | e.g. day 14, 9:00 | Same time each reading; day number for the maths |
| Position and code | shelf slot + A1 … E3, R | Catches a warm or draughty slot |
| Assembled weight, g | to your scale's resolution | The only loss measure that counts |
| R reading, g | sealed reference | Drift check, before the others |
| Room temp / humidity | min and max since last reading | Explains a fast or slow interval |
| Clarity, reeds | clear / hazy; tips wet / dry | Flags a failing arm early |
| Notes | AC on, window open, dropped reed | The reason a point looks odd |
The maths. For each bottle, grams a day = (weight on day 7 − weight on day 28) ÷ 21. Starting at day 7 leaves out the first days, when reeds are still filling and the curve is uneven. If you have a spreadsheet, fit a straight line through days 7–28 and use its slope; it uses every reading and is less sensitive to one bad day. Take the median of the three bottles as the arm's figure. Days a fill lasts = fill ÷ grams a day.
| Arm | Day 7 | Day 21 | g/day | Days to empty 100 g |
|---|---|---|---|---|
| A · DPG formula | 99.10 | 97.52 | 0.11 | about 886 |
| B · CSI base | 92.10 | 74.60 | 1.25 | about 80 |
| D · DPG + reeds | 99.30 | 98.25 | 0.07 | — |
| E · DPG, open | 99.80 | 99.41 | 0.03 | — |
Interpreting the arms against each other
Read the illustrative sheet above as a pattern, not a result. Arm A (0.11 g a day) sits close to arm D (0.07 g a day): adding the oil to DPG changed little, so the oil isn't what is holding the diffuser back. Arm D is clearly above arm E (0.03 g a day), so the reeds are adding evaporating surface; they are doing their job. The gap to arm B (1.25 g a day) is the carrier. In that pattern, DPG is the limit, and at 886 days to empty, arm A wouldn't throw much in a room on any reasonable product life. Arm B, at about 80 days for 100 g, sits within reach of a two-to-three-month product; against a 60-day target (1.67 g a day) it is still on the slow side. That is a judgement against your target, not a verdict on the base, and the blind sniffs decide whether its extra loss is also extra throw.
| Pattern | What you see | Means | Next |
|---|---|---|---|
| 1 | A ≈ D, both well below B | The carrier (DPG) is the limit | Test B (or C) for throw and life over a second month |
| 2 | A well below D | The oil, at this load, slows DPG further | Load or oil, before carrier; see the load posts |
| 3 | D ≈ E | Reeds add little surface | Reed condition and count; see the rattan and flip posts |
| 4 | A, B, C all similar and slow | Room or reeds, not the carrier | Repeat in the product's real room; don't buy a base |
| 5 | R moved | Your measurements are unreliable | Fix the scale or routine; restart |
| 6 | Bottles in one arm disagree | Process or position | Fill and reed handling; check the warm slot |
Argued against our own interest: pattern 4 means a CSI base won't fix your diffuser, and if your own arm C wins pattern 1, keep it: we don't sell DPG or co-solvents and won't pretend our base always wins. For reed problems, see the rattan-versus-fibre post and the flip post. If you want to score five blends on weight, sniff and reed condition together over 30 days, that scoring system is the five-blends post; this page stays with the weight method. Our live guide on testing reed diffuser performance over 30 days adds the intensity and reed-condition columns.
The purchase step after a pass
If arm B passes your rule on a second month, weigh 100 ml of Pure Performance to find your density, then size the run. For 40 bottles at 80 ml of base each you need 3,200 ml: seven 500 ML bottles (₹7,693.00) at about 1.0 g/ml, or about ₹175.84 of base per bottle. Reeds for 40 bottles at six each: two packs of 100 and one of 50 (₹2,000.00); bottles: four Gold 120 ML packs (₹4,248.00). Start from the 100g samples you tested, not five 500 ml bottles, until the second month confirms it. CSI lists no base larger than 500 ml, so ask on WhatsApp before bigger runs. Material costs exclude labour, freight, packaging and GST.
What to buy for this test, and what to skip
Chosen on page statements, price and stock on 7 October 2026, not on performance data; CSI publishes none for its bases, reeds or scale resolution. Each card says when not to buy.
| Listing | Price | — | Before day 0 |
|---|---|---|---|
| Default Title | ₹354.00 | — | check resolution with a known weight before day 0 |
| Variant | Price | Each | For this test |
|---|---|---|---|
| 120 ML Pack of 10 | ₹1,062.00 | ₹106.20 each | two packs (₹2,124.00) for 16 positions |
| 50 ML Pack of 10 | ₹826.00 | ₹82.60 each | only if you sell 50 ml |
| Pack | Price | Per reed | For this test |
|---|---|---|---|
| Pack of 25 | ₹236.00 | ₹9.44 | with the 50 |
| Pack of 50 | ₹400.00 | ₹8.00 | with the 25: 72 reeds for arms A–D |
| Pack of 100 | ₹800.00 | ₹8.00 | production after the test |
| Pack of 500 | ₹4,000.00 | ₹8.00 | same per reed as 50 |
| Size | Price | Unit price | For this test |
|---|---|---|---|
| 100g | ₹325.00 | ₹3.25 a gram | arm B: 240 g, three packs ₹975.00 |
| 500 ML | ₹1,099.00 | ₹2.20 a ml | only if arm B wins |
Skip for now: Lift, Longevity, Depth or Softness as extra arms (one CSI base arm plus your own alternative is enough to start); the CSI HyperDiffusion Base™, out of stock on 7 October 2026; the Isopropyl Alcohol Spray, a cleaner, never a diffuser ingredient; and Pure Performance 500 ML before arm B has passed.
CandleMakingSuppliesIndia sells the base, reeds, bottles and scale named here. It does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol, and this page says so. Our base pages publish no composition, density, flash point or SDS in the text we captured, and our scale page states no resolution; the page tells you when to use someone else's scale.
Every CSI price was checked on 7 October 2026, with stock checked per variant; everything priced here is in stock on that date, and the CSI HyperDiffusion Base™ is out of stock and not offered. The review quoted is a real, verified Judge.me review, reproduced word for word.
The ten-day reading, the 14-day extract, the target life and the thresholds are labelled illustrations and worked examples, not CSI test data. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Made a Reed Diffuser Using 80 g DPG and 20 g Fragrance Oil, but the Reeds Are Wet and the Room Has Almost No Smell — Is DPG the Wrong Base for This Formula?
- I Used DPG as My Only Reed Diffuser Base, and the Liquid Level Has Barely Dropped After Two Weeks — Should I Switch to a More Volatile Carrier?
- My DPG Reed Diffuser Lasts Three Months but Doesn’t Fragrance the Room — How Do I Balance Evaporation Rate and Fragrance Throw?
- My DPG-Based Reed Diffuser Smells Strong Only When I Flip the Reeds — How Do I Determine Whether the Base or Reed Material Is Responsible?
- I Made a Reed Diffuser with DPG and Natural Rattan Reeds, but the Fragrance Barely Travels Upward — Should I Test Fibre Reeds Before Changing the Formula?
- I Want to Make a 500 g Reed Diffuser Trial with DPG and a More Volatile Compatible Carrier — How Do I Structure the Test Without Changing Multiple Variables at Once?
- I Have Made Five Different Solvent Blends, but I Cannot Tell Which One Performs Best — What Measurements Should I Record During a 30-Day Test?
- I Want to Stop Guessing with DPG Reed Diffuser Formulas — How Do I Compare Solubility, Wicking, Evaporation, Throw and Cost Before Choosing My Next Base?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lavender Fragrance Oil, Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g), Solar Bloom Fragrance Oil. They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Pradeep Kumar Dahiya, Sooraj R, snehal Chaudhary, Thenirvaofficial, Priyanka Purohit, Akansha. Reviews below five stars are included as published, not filtered out.
Figures verified 7 October 2026, CSI live pricing: Candle Making Weighing Scale ₹354.00 (no resolution or capacity stated); Pure Performance Reed Base Oil 100g ₹325.00, 500 ML ₹1,099.00 (₹2.20 a ml); CSI HyperDiffusion Base™ ₹1,499.00 (out of stock); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed from 50 up); Gold Reed Diffuser Bottle Pack of 10, 120 ML ₹1,062.00 (₹106.20 each), 50 ML ₹826.00 (₹82.60 each). Per unit = pack price ÷ units, two decimals. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol.
Non-price figures: "DPG" and "almost no weight loss after ten days" are the reader's (title). The 1.0 g ten-day loss, 100 g fill, 60-day target, reading days, 14-day extract and decision thresholds are labelled illustrations or worked examples, not CSI test data. Scale-resolution figures assume two readings each uncertain by one display step. Base cost per bottle treats 80 ml as 80 g only if your weighed density is near 1.0 g/ml. No numeric flash points, viscosities or evaporation rates for any material are quoted. Review 85 is quoted verbatim. Costs exclude labour, freight, packaging and GST. Diwali 8 November 2026 is a calendar fact.