My Reed Diffuser Formula Is Clear with 10% Fragrance Oil but Separates at 20% — How Do I Determine Whether the Solvent Blend Has Reached Its Compatibility Limit?
Share
Why does 20% fail when 10% works? At 20% every gram of carrier has to hold 2.25 times as much oil as at 10%. Many blends have a ceiling for a given oil, and it is usually lower in the cold. A weighing slip, a different oil lot or reading the 10% too early can look the same, which is why the ladder re-tests both.
Then what? Work below the limit if throw allows, shift the carrier ratio, change one carrier, or test a ready-made base at 20%. Confirm whichever you pick in bottles: three weighed 100 g bottles per arm, 14–30 days.
What does CSI supply? The oil (Apple Cinnamon in the worked example), a reference base (Depth), Gold 120 ML bottles, fibre reeds and a beaker; the kit is ₹4,282.90. CSI sells no DPG or DPM.
Your two batches, restated
Your title gives two results: the formula is clear at 10% fragrance oil and separates at 20%. It doesn't give the carrier, so this page uses a worked example: a carrier of DPG 40 : DPM 60 by weight, and Apple Cinnamon, a spiced gourmand. The 10% batch was 10 g oil + 36.0 g DPG + 54.0 g DPM; the 20% batch was 20 g oil + 32.0 g DPG + 48.0 g DPM. Both are 100 g with the carrier ratio held at 40:60, which is the correct way to compare loads, and the first thing to check on your own sheets.
The symptom, as usually described: the 10% bottle has been clear on the shelf for a fortnight; the 20% batch looked fine when mixed and showed a distinct lower layer the next morning, in a workroom that is air-conditioned at night. Your question is whether that is the blend's ceiling or something else. It matters, because the answer decides whether you reformulate, change load or just re-mix.
The arithmetic shows why a ceiling is plausible. At 10%, each gram of carrier holds 0.111 g of oil; at 20%, 0.250 g, which is 2.25 times as much. If the oil has components that the carrier only just holds at 10%, doubling the load can push them out, and cooler conditions often make that worse. Plausible isn't proven, though. CSI doesn't sell the solvents in your blend (no DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol), so their behaviour with your oil is something your jars establish, not something we can look up for you.
Limit or look-alike: the cause table
A true compatibility limit has a signature: a clean, repeatable step from clear to not-clear at one load, lower in the cold. Several other causes produce "clear at 10%, separated at 20%" without any limit being involved. The table separates them.
| Cause | What you'd see | Discriminating check | Fix |
|---|---|---|---|
| Solvent choice: the blend has a real limit for this oil | A clean step: clear up to one load, hazy or layered above it, repeatable | Ladder in 2% steps, two shelves, read to 7 days; repeat the edge rungs | Work below the limit, or change the carrier ratio or the carrier |
| Oil character: one part of the oil drops out first | A layer, often at top or bottom, rather than a uniform haze; worse in the cold | Oil in each carrier alone at 20%; see which one separates | Move the ratio towards the carrier that holds the oil; or a different oil |
| Load arithmetic | The "20%" batch was oil against carrier (25% of total), or carrier grams were kept fixed and oil added | Recompute oil ÷ total from actual weights for both batches | Weigh to the total; hold the carrier ratio, not the carrier grams |
| Different oil lot or bottle | The 10% batch came from one bottle, the 20% from another | Make both loads from the same bottle on the same day | One lot for the whole ladder; note lot numbers |
| Reeds, bottle, fill | Clear in the jar, separated in the diffuser bottle | Fill one new, dry bottle with the clear jar's liquid, no reeds | Dry bottles; reeds from one lot; see the bottle guide |
| Environment: temperature | Clear warm, separated in a cool room or after AC; clears again when warmed | Room and cool copies of each rung | Design to the cool-shelf limit |
| Process and rest | The 10% was judged at 1 hour, the 20% overnight | Read every rung at 1 h, 24 h, 72 h and 7 days | Judge only after the same rest; 7 days for the edge rungs |
| Measurement error | Rungs out of order (16% clear, 14% hazy) | Re-weigh; repeat the odd rung from a fresh mix | A 0.1 g scale for 20 g jars, or 40 g jars |
The second row deserves a sentence more. A fragrance oil is a mixture, and when a blend is over its limit, often only part of the oil comes out of solution, as a layer, while the rest stays dissolved. If your 20% batch shows a layer rather than an even haze, the oil in each carrier alone at 20% will often tell you which carrier is losing its grip. That test belongs to the two-carrier cloudy guide, and its arithmetic for moving grams between carriers without changing the load is in the DPG-to-DPM ratio calculation.
The load ladder, step by step
Six rungs, two shelves, two reference jars: fourteen jars of 20 g each, made on one day. They use 44.0 g of oil in all, which a 50 gm pack covers. Weigh on a scale reading 0.1 g; on a whole-gram scale, make 40 g jars, because adjacent rungs differ by only 0.4 g of oil at 20 g.
| Rung | Oil | DPG | DPM | Room shelf (illustrative) | Cool shelf (illustrative) |
|---|---|---|---|---|---|
| 10% | 2.0 g | 7.20 g | 10.80 g | clear at 7 days | clear at 7 days |
| 12% | 2.4 g | 7.04 g | 10.56 g | clear at 7 days | clear at 7 days |
| 14% | 2.8 g | 6.88 g | 10.32 g | clear at 7 days | clear at 7 days |
| 16% | 3.2 g | 6.72 g | 10.08 g | clear at 7 days | haze by 7 days |
| 18% | 3.6 g | 6.56 g | 9.84 g | haze by 7 days | haze by 72 h |
| 20% | 4.0 g | 6.40 g | 9.60 g | haze by 24 h | haze by 1 h |
Why 2% steps? A 5% ladder (10, 15, 20) would only tell you the limit is between 15 and 20, or between 10 and 15. That leaves a five-point gap, and a working load chosen inside it could be anywhere from comfortable to borderline. Two-point steps narrow it to a range you can design to. If the edge falls between two rungs and you care about the last point, add one rung at the odd number between them. Finer than that is rarely useful, because lot-to-lot variation in the oil and the solvents is likely to be as large.
Why a reference? The Depth Base jars at 20% answer a separate question: can this oil be held clear at 20% at all, in a different carrier? If they separate too, the oil itself is demanding at that load, and option 5 below moves up the list. If they stay clear, a different carrier is at least possible. Either way, a clear jar is not a performance result.
Rest, temperature and calling the limit
Rest. Clarity changes with time. A rung near the limit can look clear at 1 hour and haze by 72 hours as the mixture settles; a rung over the limit can look hazy at mixing and partly clear after a day as bubbles and streaks settle. Reading at 1 hour, 24 hours, 72 hours and 7 days shows which way each rung is moving. The edge rungs are the ones that change; the rungs well below and well above usually don't.
Temperature. Many blends hold less in the cold. A cool shelf, an AC room at night or a cupboard against an outside wall, imitates a customer's air-conditioned bedroom or a winter night in North India (roughly December to February). Record both shelf temperatures with your own thermometer. A warm shelf is worth adding if you sell into hot, sunny rooms during the Indian summer (roughly April to June), but the cold side usually sets the limit.
Calling it. In the illustrative result, the room shelf is clear to 16% and the cool shelf to 14%. The limit for this blend and oil is 14%. If you want a margin, write it down as your own judgement; one rung below, 12%, is a common choice. Then, before you change anything else, re-make the 14% and 16% rungs from fresh and see whether they repeat. A limit that doesn't repeat isn't one.
If the step is clean and repeats, the blend has reached its compatibility limit for this oil. If it doesn't, look at rows three to eight of the cause table again. Separation after a week or more, rather than within days, is a stability question, covered by the longer-term stability tests; a layer that appears overnight in a single production batch is the two-layers guide.
Once you know the limit: options and the bottle test
Knowing the limit turns one question into five choices. The table lists them in order of how little they change.
| Option | When it fits | What it costs you | Test |
|---|---|---|---|
| 1 · Work below the limit (12–14%) | throw at 12–14% is enough for your room and customer | nothing; oil per bottle falls | arms A and C below |
| 2 · Shift the carrier ratio | oil-in-each-carrier jars show one carrier holds the oil better | a new ladder at the new ratio | repeat the ladder, then bottles |
| 3 · A different carrier | every ratio of these two hits the limit below your target | a new solvent, new SDS, new ladder | ladder + bottles; the hub covers isolation |
| 4 · A ready-made base at 20% | you want 20% and don't want to reformulate | ₹175.84 of base per bottle; a black box | arm B below |
| 5 · A different oil for the scent | only this oil separates; others in the family don't | a new oil lot to qualify | ladder with the new oil |
The bottle test. Three arms, three Gold 120 ML bottles each at a weighed 100.0 g, six Black reeds per bottle, one room, positions rotated. Arm A: your blend at the limit, 14%: master batch 46.2 g oil + 283.8 g carrier at 40:60. Arm C: your blend one rung below, 12%: 39.6 g oil + 290.4 g carrier. Arm B (reference): 20% in Depth Base: 66 g oil + 264 g base. Each master batch is 330 g with a 30 g sealed retain. Weigh every 2–3 days with reeds in, after a sealed check bottle; g/day per bottle = (day-0 weight − last weight) ÷ days. Sniff each coded bottle alone in a closed second room after 15 minutes on days 3, 7, 14 and 30, intensity 1 to 5 (an in-house method, not a standard). Inspect clarity at every reading. The general 30-day method is in the 30-day weight-loss test.
Your decision rule, written before day 0
An example to adapt. Arm A (or C) wins if it stays clear in every bottle and the retain to day 30, its mean g/day sits inside your life window (say 100 g over 45 to 90 days, 1.11 to 2.22 g/day), and its day-14 sniff median is within one point of Arm B's. If 12% throws as well as 14%, choose 12%: more margin from the limit and less oil. Arm B wins only if it is clear, inside the same window, and at least one point stronger on day 14 on two of the last three sessions.
If you need 20% and neither arm gets you there, the remaining options (a different carrier, or a different oil) start a new ladder. For a heavy, sweet oil the cluster has its own guide, the heavy vanilla blend guide; for a home-made base that keeps failing, the hub, which component limits a DPG and DPM blend, isolates the weak link. Any added solvent changes the formula's safety picture as well: read its SDS, keep diffusers and stock away from flames and heat, avoid skin and eye contact while mixing, and keep finished bottles away from children and pets. Labelling depends on the full formula and the rules that apply to you; we can't give legal advice.
What to buy for the test, and after it
Chosen on page statements, price and stock on 7 October 2026, not on performance: CSI publishes no clarity or diffusion data for any product. The oil, bottles and reeds are the constant parts; Depth is the 20% reference.
| Size | Price | Per gram | 100 g bottles at 20% | In this test |
|---|---|---|---|---|
| 15 gm | ₹93.22 | ₹6.21 | 0 | smell check only |
| 50 gm | ₹237.18 | ₹4.74 | 2 | both ladders + reference jars (44.0 g) |
| 100 gm | ₹474.36 | ₹4.74 | 5 | two + a 50 gm cover ladders and three arms |
| 500 gm | ₹2,371.80 | ₹4.74 | 25 | production, after a pass |
| 1 kg | ₹4,743.60 | ₹4.74 | 50 | same per gram as 50 gm |
| Size | Price | Per ml | In this test |
|---|---|---|---|
| 500 ml | ₹1,099.00 | ₹2.20 | two reference jars + arm B (264 g) |
| Item | Price | In this test |
|---|---|---|
| Silicon Measuring Beaker 100 ML | ₹300.00 | oil and the 40:60 carrier stock |
| Silicon Measuring Beaker 250 ML | ₹600.00 | optional, master batches |
| Size | Price | Per bottle | In this test |
|---|---|---|---|
| 50 ML Pack of 10 | ₹826.00 | ₹82.60 | not for 100 g fills |
| 120 ML Pack of 10 | ₹1,062.00 | ₹106.20 | 9 test bottles + 1 check |
| Pack | Price | Per reed | In this test |
|---|---|---|---|
| Pack of 25 | ₹236.00 | ₹9.44 | with the 50 |
| Pack of 50 | ₹400.00 | ₹8.00 | with the 25 |
| Pack of 100 | ₹800.00 | ₹8.00 | production |
| Pack of 500 | ₹4,000.00 | ₹8.00 | no saving per reed |
Test quantities. Oil: 44.0 g for the jars + 151.8 g for three arms = 195.8 g. Two 100 gm and a 50 gm (₹1,185.90) leave 54.2 g. Depth Base: 264 g plus two 16 g jars, at a labelled 1.00 g/ml; CSI base pages state no density, so weigh 100 ml for your own figure. Bottles: one pack. Reeds: 50 + 25. Kit ₹4,282.90. Per bottle, oil is ₹66.41 at 14% and ₹94.87 at 20%; Depth adds ₹175.84. Costs exclude labour, freight, packaging and GST.
After a pass: 40 bottles. If your blend at 14% wins: oil 588 g (14 g a bottle + 5% allowance, worked example), a 500 gm and a 100 gm, ₹2,846.16; your carrier 3,612 g (1,445 g DPG + 2,167 g DPM) from your solvent supplier; four packs of bottles, ₹4,248.00; 240 reeds as 100 + 100 + 50, ₹2,000.00. CSI items ₹9,094.16. If Depth at 20% wins: oil 840 g, a 500 gm and four 100 gm, ₹4,269.24 (the 1 kg would cost ₹474.36 more, at the same price per gram); base 3,360 ml, 7 packs, ₹7,693.00; bottles and reeds as above. CSI items ₹18,210.24. CSI lists no bulk tier for bases; ask on WhatsApp.
Skip: the CSI HyperDiffusion Base (out of stock on 7 October 2026), and the Isopropyl Alcohol Spray, which is a cleaner and never a way to clear a separated diffuser. If a different Augeo-type base clouds a sweet oil at 25%, the Augeo-type vanilla clarity ladder covers that case.
CandleMakingSuppliesIndia sells fragrance oils, reed diffuser bases, fibre reeds, bottles and beakers. It does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol. This page still tells you the likeliest fix is a lower load in your own blend, that our Apple Cinnamon costs the same per gram from 50 gm to 1 kg, that our reed packs save nothing above 50, and that our base pages publish no composition, density, flash point or SDS in the text we captured.
Every CSI price was checked on the live store on 7 October 2026, with stock checked per size. Every product and size offered here was in stock on that date; the CSI HyperDiffusion Base is out of stock and not offered. Page wording is quoted and attributed.
The carrier ratio, the ladder outcomes, the 14% and 16% limits, the life window and the decision rule are labelled worked examples and judgement, not CSI test data. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Mixed DPG and DPM to Make My Own Reed Diffuser Base, but the Finished Diffuser Still Has Weak Throw — How Do I Determine Which Component Is Limiting Performance?
- I Want to Replace 20 g of DPG with DPM in a 100 g Reed Diffuser Formula — How Do I Calculate the New Ratio While Keeping Fragrance Load Constant?
- I Made a Reed Diffuser with 20% Fragrance Oil and a Blend of Two Carriers, but It Turned Cloudy — How Do I Identify the Incompatible Ingredient?
- I Mixed IPM into My Reed Diffuser Base, and the Fragrance Became Hazy — Should I Test the Carrier Blend Before Adding the Fragrance?
- I Want to Make My Own Reed Diffuser Base Instead of Buying a Ready-Made One — What Small-Batch Compatibility and Performance Tests Should I Complete First?
- I Made a 500 g Reed Diffuser Base Blend, but the Final Fragrance Formula Is Cloudy — Should I Reformulate the Carrier or Change the Fragrance Oil?
- I Mixed Two Solvents That Appear Compatible, but My Reed Diffuser Separates After a Week — What Longer-Term Stability Tests Should I Perform?
- I Want to Make a Reed Diffuser with a Heavy Vanilla Fragrance — Should I Evaluate Different Solvent Blends Rather Than Increasing the Total Carrier Quantity?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Apple Cinnamon Fragrance Oil, Cinnamon Vanilla, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml). They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — PREETHI PRASATH, Shivalik Manak, Sooraj R, snehal Chaudhary, Punam Sarma. The reviews from Lalitha Jagan are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.
Figures verified 7 October 2026, CSI live pricing: Apple Cinnamon Fragrance Oil 15 gm ₹93.22, 50 gm ₹237.18, 100 gm ₹474.36, 500 gm ₹2,371.80, 1 kg ₹4,743.60 (₹4.74 a gram from 50 gm up); Depth Base 500 ml ₹1,099.00 (₹2.20 a ml); Gold Reed Diffuser Bottle 50 ML pack of 10 ₹826.00, 120 ML pack of 10 ₹1,062.00 (₹106.20 each); Fiber Diffuser Reeds (Black) 25 ₹236.00, 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00; Silicon Measuring Beaker 100 ML ₹300.00, 250 ML ₹600.00. All in stock on 7 October 2026; the CSI HyperDiffusion Base is out of stock. Per gram, per ml and per item = price ÷ units, two decimals.
Non-price figures: the reader's title gives 10% clear and 20% separated; the DPG 40 : DPM 60 carrier, Apple Cinnamon, the symptom details, all ladder outcomes, the 14% and 16% limits, the margin, the life window and the decision rule are labelled worked examples and in-house judgement. Three bottles per arm, 100 g fills and six 20.3 cm fibre reeds are the series method. No density, flash point, viscosity or evaporation figure is given for any material. Indian seasons are approximate calendar facts; Diwali 8 November 2026 and Christmas 25 December 2026 are calendar facts. Costs are materials only and exclude labour, freight, packaging and GST.