I Made a Reed Diffuser with 20% Fragrance Oil and a Blend of Two Carriers, but It Turned Cloudy — How Do I Identify the Incompatible Ingredient?

I Made a Reed Diffuser with 20% Fragrance Oil and a Blend of Two Carriers, but It Turned Cloudy — How Do I Identify the Incompatible Ingredient?

 

Fresh Strawberries 100 gm ₹377.60 Lift Base 500 ml ₹1,099.00 Gold 120 ML bottles, 10 for ₹1,062.00
Cloudy blend · find the culprit
Take the formula apart in nine jars, change only the ingredient the pattern convicts, then confirm in three bottles per arm for 14–30 days.
★★★★★
"Absolutely loved it!! Smells so perfect!! Go for itt! Packing is done very carefully and happy for that!❤️"
Kavitha murthyOct 2025
Fresh Strawberries
★★★★★
"Really nice fragrance, we continue our shopping going forward."
Uchu OmoideVerified buyer · Sep 2025
Fresh Strawberries
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
★★★★★
"Nice product"
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML)
★★★★☆
"I just tried it out , it's absolutely stunning. Super easy to use and such a life saver."
ThenirvaofficialVerified buyer · Mar 2026
Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g)
★★★★★
"I am really happy with this fragrance.Its absolutely overwhelming fragrance. I used it in champagne candle and received a very positive review from my customer."
Ranjita RAOVerified buyer · Feb 2026
Orchard Pear
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. They are general reviews of the products named on each card, not assessments of the advice set out below. Wording is unedited.
✓ Prices verified 7 October 2026, stock checked per size ✓ GST invoice; MSDS and IFRA documentation on request ✓ CSI sells no DPG or DPM — the fix may not be ours
CSI Reed Diffusers · cloudy blends
A cloudy two-carrier diffuser has a culprit, and nine small jars usually name it: oil alone, carriers alone, oil in each carrier, two mixing orders, warm, a reference base and a fresh lot. Fix only what the jars convict, then prove it in bottles.
9 jars
one oil lot, 20 g each, read at 1, 24 and 72 hours · jar stage ₹512.40 · CSI live pricing, October 2026
Quick answers — read this first
How do I find the incompatible ingredient? Take the formula apart in small jars: oil alone, the two carriers alone, then the oil in each carrier alone at 20%. The jar that clouds names the pair that disagrees. Then make the full formula in both mixing orders, and warm against room temperature, to rule out process.

What does each jar contain? 20 g, at your own ratios: 4.0 g oil + 16.0 g of one carrier for the single-carrier jars; 4.0 g oil + 10.0 g DPG + 6.0 g DPM for the full formula. Nine jars, one oil lot, one day; read at 1 h, 24 h and 72 h.

Is the "incompatible ingredient" always a solvent? No. It can be the oil itself, one drum of a solvent (moisture or contamination), a cold room, a wet bottle, or the mixing order. Two of the nine jars exist only to catch those: a reference base and a sealed fresh lot.

What then? Fix the one suspect, then confirm in bottles: three 100 g bottles per arm, weighed every 2–3 days for 14–30 days, clarity checked at every reading. CSI supplies the oil, a reference base (Lift), bottles, reeds and beakers; the jar-and-confirmation kit is ₹3,616.20. CSI sells no DPG or DPM.
The short answer
The method: elimination in jars. Change one thing per jar; the jar that clouds identifies the pair.
The nine jars: oil alone; carriers alone; oil in each carrier; full formula in two orders; full formula warm; oil in a reference base; oil in a sealed fresh lot.
The trap: blaming a solvent when the cause is one lot, the temperature, the bottle or the order of mixing.
The proof: a clear jar is a hypothesis. Three weighed bottles per arm for 14–30 days, clear at every reading, is a result.
Nine jars, one culprit: reading the haze pattern 20 g jars at the formula's own ratios · same oil lot · same day · illustrative, not CSI test data J0 oil alone 10 g, room temp clear J1 carriers only 12.5 g DPG + 7.5 g DPM clear J2 oil + old DPG 4.0 g + 16.0 g DPG HAZY J3 oil + DPM only 4.0 g + 16.0 g DPM clear J4 full, your order carriers first, oil last HAZY J5 full, reversed oil first, carriers after HAZY J6 J4 kept warm warm shelf, 24 h hazy, less J7 oil + Lift Base 4.0 g + 16.0 g, reference clear J8 oil + NEW DPG lot 4.0 g + 16.0 g, sealed lot clear Read it: Carriers alone clear (J1) → they mix. Oil alone clear (J0) → the oil is fine. Haze only where the oil meets the old DPG (J2, J4–J6), in either order → not process. A sealed DPG lot is clear (J8) → suspect that drum (moisture, contamination), not DPG as a solvent. Then confirm in bottles.
An illustrative nine-jar result. Haze appears only where the oil meets the old DPG, in either mixing order and when warm; the same oil in a sealed DPG lot, in DPM and in Lift Base stays clear. That points to one drum, not to DPG as a solvent. Your jars may point elsewhere; the reading table below covers each pattern.
Straight answer
I made a reed diffuser with 20% fragrance oil and a blend of two carriers, but it turned cloudy. How do I identify the incompatible ingredient?
Take the formula apart one ingredient at a time, in small jars made on the same day from the same oil bottle. First the oil alone, to check it is bright. Then the two carriers alone at your ratio: if they cloud without oil, the carriers don't mix. Then the oil in each carrier alone at 20%: the jar that clouds names the carrier the oil disagrees with. Then the full formula in both mixing orders and warm against room temperature, to separate process and temperature from chemistry. Add two references: the oil in a ready-made base, to check the oil, and the oil in a freshly opened lot of the suspect carrier, to check that drum. Read every jar at 1 hour, 24 hours and 72 hours against a dark card. Change only the ingredient the pattern points to, then confirm in three weighed 100 g bottles per arm for 14 to 30 days before you call it fixed.
One line: oil alone, carriers alone, oil in each carrier, two orders, warm, a reference base, a fresh lot; the jar that clouds names the culprit.
Jar stage only: Fresh Strawberries 50 gm ₹212.40 + 100 ML beaker ₹300.00 = ₹512.40, plus nine clean jars of your own. Jars and bottle confirmation: ₹3,616.20 with Lift Base, or ₹2,517.20 without it. In stock on 7 October 2026.
Fresh Strawberries — from ₹212.40

Your cloudy formula, restated

Cloudy is a symptom with at least eight causes. Only one of them is "these ingredients don't get on".

Your title gives the load, 20% fragrance oil, and the structure, a blend of two carriers, and the symptom: the finished liquid turned cloudy. It doesn't name the carriers, so this page uses a worked example: 20 g Fresh Strawberries + 50 g DPG + 30 g DPM, 100 g by weight. The carrier is 62.5% DPG and 37.5% DPM. Your carriers may be different, perhaps DPM with an Augeo-type solvent; the method doesn't change, only the labels on the jars.

The symptom, as makers usually describe it: clear in the beaker for a few minutes, a soft milky haze within the hour, no separate layer, and a faint shimmer when held to the light. The batch was mixed carriers first, oil last, in a cool workroom, into a beaker rinsed and air-dried, and the DPG came from a drum opened some months ago. Each of those details is a suspect. The work is to clear them one at a time instead of changing the whole formula on a guess.

Two things this page is not. If one of your carriers is IPM, the oily ester, the haze has its own story in the IPM haze guide. If your blend is clear at 10% and only separates at 20%, the question is a load limit, and the compatibility-limit ladder handles that. And if you already have a 500 g batch and want to know whether to change carrier or oil, the 500 g cloudy-blend decision covers rescue. This page finds the culprit.

Don't do this: add more of one carrier to "clear it up". Diluting changes the load and the ratio at once, so even if the haze fades you won't know why. Don't raise the oil to "fix" a weak, hazy diffuser. Don't change the oil, both carriers and the bottle in one go. Don't judge clarity on day 1 alone. And don't order a drum of a new solvent until the jar pattern and a 14 to 30-day bottle test agree.

Eight suspects: the cause table

The table separates the suspects into solvent choice, fragrance and load, the oil itself, the raw-material lot, bottle and fill, temperature, process and measurement. The discriminating check column is the reason the jar test has nine jars: each jar exists to clear or convict one row.

Cause table · why a two-carrier blend clouds
Each row is a separate suspect. The discriminating check is a jar or a reading that clears one suspect without touching the others.
Cause What you'd see Discriminating check Fix
Solvent choice: the two carriers don't fully mix Haze or a faint line even before oil goes in J1: carriers only, at your ratio, no oil Change one carrier, or its share; ask your supplier about miscibility
Fragrance and load: the oil isn't fully soluble in one carrier at this % Haze only in the jar with that carrier; often worse at higher % J2 and J3: oil in each carrier alone at 20% Lower that carrier's share, lower the load, or test another base; see the load ladder
Oil character: the oil itself is hazy, cold or has settled J0 not bright; haze in every jar including the reference J0: oil alone, at room temperature, after a gentle swirl Warm gently to room temperature, mix the stock bottle, ask about the lot
Raw-material lot: moisture or contamination in one drum Haze with one lot, clear with a sealed lot of the same carrier J8: same oil in a fresh, sealed lot of the suspect carrier Quarantine the lot; keep drums closed and dry; ask your supplier
Bottle, reeds or fill Clear in the jar, cloudy only after filling or after reeds go in Fill one new, dry bottle without reeds, one with reeds, one from your usual wash Dry vessels completely; new reeds from one lot; see the residue guide
Environment: temperature Hazy in a cool room or after AC, clearer when warm J6 (warm) against J4 (room), compared after 24 h Record temperature; a haze that comes and goes still fails a sale test
Process: order, stirring, rest Haze in one mixing order and not the other; streaks that settle J4 against J5; stir time recorded; rest 24 h covered Fix one order and stir time; write them on the card
Measurement error The "20%" was oil against carrier (25% of total) or measured by ml Recompute oil ÷ total from your actual weights Weigh every component; % of total by weight

Two rows deserve emphasis because they are the ones people skip. The lot. Glycol solvents can take up moisture from the air when a drum is opened repeatedly or left loosely closed, and many fragrance materials do not tolerate water well. If so, the same solvent from a sealed lot can behave differently from your old drum. That is a hypothesis, which J8 tests directly; it is not a property we can quantify for your supplier's material. Ask them for its specification and storage advice. Measurement. If your "20%" was 20 g of oil against 80 g of carrier written as 25%, or the carriers were measured by millilitre, the formula you made is not the one on paper. Re-weigh before you test anything; the DPG-to-DPM ratio calculation shows how grams, % of total and % of carrier relate.

Haze, layer or sediment?
Record which one you have. Haze is uniform cloudiness. A layer is a distinct band, top or bottom, that grows over hours. Sediment is solid matter on the floor of the jar. They point to different causes and different pages: layers overnight are covered in the two-layers guide, and sediment with a heavy oil in the oud sediment guide.

The nine-jar elimination test

Small jars, not bottles, for speed: the jars show clarity within hours, and you need about 38 g of oil for all nine. Each jar is 20 g, made at the formula's own ratios, so that what you see in a jar is what would happen in the diffuser. The method below assumes a scale reading to 0.1 g; on a whole-gram scale, double every jar to 40 g.

1
Set out nine clean, dry, clear glass jars. Label them J0 to J8 on the lid and on the base. Same jar type for all, so you are comparing the liquid, not the glass. Make all jars on the same day from the same oil bottle.
2
Look at the oil alone first (J0). Pour about 10 g into J0 at room temperature. It should be bright, with no haze, flecks or layer. If it isn't, stop: everything downstream inherits it.
3
Mix the carriers alone (J1). At your carrier ratio, 12.5 g DPG + 7.5 g DPM, stirred for one minute. Clear means the carriers mix with each other; that is all it means.
4
Put the oil into each carrier alone (J2, J3). 4.0 g oil + 16.0 g of one carrier, the same 20% as your diffuser. These two jars are the heart of the test: they show which carrier the oil disagrees with.
5
Make the full formula two ways (J4, J5). J4 in your usual order, carriers first and oil last; J5 the reverse. Each is 4.0 g oil + 10.0 g DPG + 6.0 g DPM. Same stir time. J6 is a copy of J4 kept on a warm shelf.
6
Add the references (J7, J8). J7: 4.0 g oil + 16.0 g Lift Base, a carrier you didn't make. J8: the same oil with a freshly opened, sealed lot of whichever carrier you suspect.
7
Read at 1 h, 24 h and 72 h. Hold each jar against a black card and a printed line of text under the same light. Score: clear, slight haze, hazy, layer, sediment. Photograph them together each time.

Recording. One line per jar per reading: jar, contents in grams, order, stir time, temperature, time since mixing, and a clarity score. Write the solvent lot numbers and the oil lot on the sheet before you start. A photo of all nine jars together, against the same dark card at each reading, makes small differences visible and gives you something to send your supplier.

Temperature. J6 tells you whether warmth changes the haze. Use a warm shelf, not a heater: you're imitating a warm room, not cooking the blend. If your workroom is air-conditioned, also note the temperature at which the haze first appeared; a blend that clouds only in a cool room will cloud in some customers' homes too. The reverse case, clear in a warm room and cloudy in the cold, is common enough to deserve its own row in your notes.

Argued against our own interest: you don't need our base for the jar test. J7 is a convenience: any ready-made reference carrier you already trust will do the job of telling "oil problem" from "blend problem". If you have one, skip Lift and spend ₹512.40 on the jar stage alone.

Reading the jar pattern

One cloudy jar is a clue. A pattern across nine is an answer.

After 72 hours, write the nine scores in a row and match them to a line below. Most results fall into one of these patterns. If yours matches none, the likeliest reasons are a weighing slip or two suspects at once; repeat the jars that disagree before reading more into them.

Reading the jar pattern
Find the row that matches your jars. Each pattern points to one suspect; confirm it before you change the formula.
Pattern Points to Next step
J1 hazy (carriers alone) the two carriers at this ratio Test them at other ratios without oil; if they never mix clear, drop one
J1 clear, J2 hazy, J3 clear oil in carrier A (or that lot of A) J8 with a sealed lot of A; if still hazy, lower A's share or change it
J1 clear, J2 clear, J3 hazy oil in carrier B Same as above, for B
J2 and J3 clear, J4 hazy the combination or the process Compare J4 and J5 (order); re-check weights; stir longer; rest
J4 hazy, J5 clear (or the reverse) mixing order Adopt the clear order; re-run in bottles
Every oil jar hazy, J7 included the oil or its lot J0 again warm; ask about the lot; try a second lot
Haze only in J4 at room temp, clear in J6 temperature sensitivity Find the temperature where it appears; decide if that's acceptable for your market
All jars clear, bottles cloudy bottles or filling Check bottle dryness and residue; see the bottle guide

The worked example, read through. In the illustrative result in the diagram, J0 and J1 are clear: the oil is bright and the carriers mix. J2 (oil + DPG) is hazy and J3 (oil + DPM) is clear, so the disagreement is between the oil and the DPG. J4 and J5, the full formula in both orders, are both hazy, so mixing order is not the cause; J6, kept warm, is a little less hazy, so temperature plays a part but doesn't explain it. J7, the oil in Lift Base, is clear, so the oil can make a clear 20% blend. And J8, the same oil in a sealed lot of DPG, is clear. The culprit in this example is the old drum of DPG, not DPG as a solvent and not the oil. The fix is a new lot, stored closed, and a check of how the old drum was kept.

Had J8 also been hazy, the conclusion would be different: this oil at 20% does not fully dissolve in DPG at this share. Then you'd test a lower DPG share, as in the ratio arithmetic, or a lower load on the ladder, or move this oil to a different carrier system. That is the point where some makers decide that one base cannot carry every scent, which is a family question for the one-carrier-or-several guide.

A note on what clear means. A clear jar shows that the oil is dissolved at that temperature on that day. It does not prove the blend will stay clear for weeks, wick well or throw well. Stability over time belongs to the longer-term stability tests; the general compatibility check after mixing is in the live cloudy-after-mixing guide. The bottle confirmation below is the minimum before you make more.

From culprit to fix: the bottle confirmation

Change only the ingredient the jars convicted, then confirm in diffusers. In the worked example that means two arms. Arm A: your formula with the new DPG lot, 20 g oil + 50 g DPG + 30 g DPM per 100 g. Arm B (reference): the same oil at 20% in Lift Base. Each arm is one 330 g master batch (66 g oil), three Gold 120 ML bottles at a weighed 100.0 g, six Black reeds each, and a 30 g sealed retain. Same room, same shelf, positions rotated at every reading.

Readings. Every two to three days: weigh each bottle with reeds in, after a sealed check bottle; note clarity, layers and sediment against the dark card; log temperature and humidity. Grams per day per bottle = (day-0 weight − last weight) ÷ days. On days 3, 7, 14 and 30, sniff each coded bottle alone in a closed second room after 15 minutes and score intensity 1 to 5 (an in-house method, not a standard). The 30-day method in full is in the 30-day weight-loss test.

Your pass rule, written before day 0

An example to adapt, not a standard. Arm A passes if: (1) all three bottles and the retain stay clear, with no layer or sediment, at every reading to day 30, including on the coolest day you log; (2) its mean g/day sits inside your life window, say 100 g over 45 to 90 days, 1.11 to 2.22 g/day; (3) its day-14 sniff median is at least 3; (4) its bottles agree within 15% of their mean. Clarity is a gate: a blend that throws well but hazes on the cool shelf has failed.

Argued against our own interest: if Arm A passes with a fresh DPG lot, you have your answer, and it isn't a CSI base. Keep your blend, fix your drum storage, and buy from us only what you were already buying: oil, bottles and reeds. Arm B earns its place only if Arm A fails again, or if you want a fallback for this scent.

If Arm A fails on clarity again, the jars missed something: re-run J2 and J8 with the new lot, and check bottles as in the clear-in-beaker, cloudy-in-bottle guide. If it fails on throw, that is a different problem: the blend may be clear and still slow, and the cluster hub, which component is limiting a DPG and DPM blend, shows how to isolate it.

Safety, briefly. Clarity work means handling solvents and oils in open jars. Work in a ventilated space away from flames and heat, avoid skin and eye contact, label every jar, and keep jars and finished diffusers away from children and pets. Hazard labelling for a finished diffuser depends on the full formula; read each raw material's SDS and check the rules that apply to you. We can't give legal advice.

Diwali, 8 November 2026, is 32 days from 7 October 2026. A cloudy batch found now is too late to fix, test for 30 days and ship before Diwali; sell only a formula that already passed. Christmas, 25 December 2026, is 79 days away: enough for the jars, a 30-day confirmation and a production run. Confirm stock on WhatsApp before ordering; GST invoice available.
WhatsApp to confirm stock

What to buy for the test, and after it

Chosen on page statements, price and stock on 7 October 2026, not on performance: CSI publishes no clarity or diffusion data for any product. The oil, bottles and reeds are the constant parts; Lift Base is a reference you may not need.

1
oil · fruity · one lot for every jar
Fresh Strawberries
The jar test only works if the oil is the same in every jar, so buy one lot. The page describes "ripe strawberry and citrus zest top notes, sweet rose and honeydew melon middle notes, and vanilla sugar and creamy sandalwood base" and gives a diffuser range, "For reed diffusers, use 10-30%". Your 20% sits inside it; the range is the supplier's guide, not a clarity promise for your carriers. The page states no composition, so whether a sweet base note is involved in your haze is something your jars show, not something we can tell you. Argued against our own interest: the 1 kg costs exactly two 500 gm packs (₹3,540.00), so there is no saving in buying the bigger pack.
Size Price Per gram 100 g bottles at 20% In this test
15 gm ₹113.28 ₹7.55 0 smell check only
50 gm ₹212.40 ₹4.25 2 enough for the jar stage alone (38 g)
100 gm ₹377.60 ₹3.78 5 two cover jars + two arms (170 g)
500 gm ₹1,770.00 ₹3.54 25 production, after a pass
1 kg ₹3,540.00 ₹3.54 50 same per gram as 500 gm
₹75.52 of oil per test bottle; ₹70.80 at the 500 gm price. Buy 100 gm — ₹377.60
2
base · reference jar and arm · page: "floral, citrus, green, and fruity"
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
J7 needs a carrier you didn't make: if your oil clouds there too, the oil is the suspect. Lift is matched here only by the page's own positioning, "Best with floral, citrus, green, and fruity fragrance families", and it describes itself as "Crystal clear, easy to blend" with "Blend with 10-30% fragrance oil". It states no composition, density, flash point or SDS in the text we captured, so we can't tell you what it contains. Its web address carries an old "ships 20th July" note though it was in stock on 7 October 2026; confirm dispatch on WhatsApp. Limitation: clear in Lift does not prove Lift performs better; that is what the bottle test is for.
Size Price Per ml In this test
500 ml ₹1,099.00 ₹2.20 J7 plus a reference arm (264 g)
₹175.84 of base per bottle at a labelled 1.00 g/ml. Buy Lift Base — ₹1,099.00
3
tool · weighing small amounts
Silicon Measuring Beaker 100 ML
For weighing oil into the jars and the master batches. The page lists "reed diffuser making" among its uses. Weigh, don't read the scale marks: 4.0 g of oil is too small to dose by volume. On a whole-gram scale, half a step is 12.5% of a 4 g addition; on a 0.1 g scale it is 1.25%. If your scale reads whole grams, double every jar to 40 g. Limitation: the page gives no solvent-resistance data; check your solvents in it overnight first.
Item Price In this test
Silicon Measuring Beaker 100 ML ₹300.00 oil additions
Silicon Measuring Beaker 250 ML ₹600.00 optional, for master batches
One beaker per liquid avoids carry-over. Buy 100 ML — ₹300.00
4
bottle · the confirmation stage
Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML)
Once a jar is clear, it still has to stay clear in a bottle, with reeds, for weeks. The 120 ML holds a weighed 100 g; one pack covers two arms of three plus a check bottle. The page says "Size: 50 and 100ml" though the listing sells 50 ML and 120 ML, and gives no neck size. Limitation: wash-and-reuse bottles are a haze suspect in their own right; use dry, new bottles for the confirmation.
Size Price Per bottle In this test
50 ML Pack of 10 ₹826.00 ₹82.60 not for 100 g fills
120 ML Pack of 10 ₹1,062.00 ₹106.20 6 test bottles + check + 3 spare
₹106.20 a bottle. Buy 120 ML 10 — ₹1,062.00
5
reeds · same lot in every bottle
Fiber Diffuser Reeds (Black)
Six a bottle, 36 for the confirmation. Length 20.3 cm, diameter not stated. The page claims "no swelling, no clogging"; a hazy liquid can still leave residue in any reed, so look at the reeds at day 14 and day 30. Argued against our own interest: 50, 100 and 500 all cost ₹8.00 a reed; buy the 50.
Pack Price Per reed In this test
Pack of 25 ₹236.00 ₹9.44
Pack of 50 ₹400.00 ₹8.00 the confirmation
Pack of 100 ₹800.00 ₹8.00 production
Pack of 500 ₹4,000.00 ₹8.00 no saving per reed
₹400.00 for 50. Buy 50 reeds — ₹400.00

Test quantities. Jars: 38 g of oil. Confirmation: 132 g for two master batches. Together 170 g, so two 100 gm packs (₹755.20) leave 30 g for a repeat jar or two. Lift: 264 g of the 500 ml, at a labelled 1.00 g/ml; CSI base pages state no density, so weigh 100 ml of it to get your own figure. Bottles: one pack of 120 ML. Reeds: one pack of 50. Kit total ₹3,616.20; without Lift ₹2,517.20. Per bottle, oil is ₹75.52 at the 100 gm price and base ₹175.84. Costs exclude labour, freight, packaging and GST.

After a pass: 30 bottles for Christmas. At 20 g of oil a bottle plus a 5% allowance (worked example) you need 630 g: a 500 gm, a 100 gm and a 50 gm, ₹2,360.00. The 1 kg would cost ₹1,180.00 more and leave oil you may not use. Bottles: three packs, ₹3,186.00. Reeds: 180, two packs of 100, ₹1,600.00. If your corrected blend won, the CSI order is ₹7,146.00, and your DPG and DPM come from your solvent supplier, from a fresh, sealed lot. If the Lift arm won, add 2,520 ml of base, 6 packs of 500 ml, ₹6,594.00, for ₹13,740.00 in all. CSI lists no bulk tier for bases; ask on WhatsApp.

Skip: the CSI HyperDiffusion Base (out of stock on 7 October 2026), and the Isopropyl Alcohol Spray, which is a cleaner. Never add it to a diffuser to "clear" haze. For a new oil lot later, rerun J0, J2, J3 and J4 before production; the new-lot check sets out that routine.

The CSI principle
Convict one ingredient before you change any.
Nine small jars, one oil lot, one day, read at 1, 24 and 72 hours. Change only what the pattern points to, then make three bottles per arm prove it over 14 to 30 days.
"Half the cloudy blends we're shown have nothing wrong with the recipe. The jar test finds the drum, the bottle or the cold room first."
— CandleMakingSuppliesIndia
Why trust this guide

CandleMakingSuppliesIndia sells fragrance oils, reed diffuser bases, fibre reeds, bottles and beakers. It does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol. This page still tells you the reference jar can use any trusted base, that a fresh solvent lot may solve your problem with no CSI base at all, that our 1 kg oil pack saves nothing over two 500 gm, and that our base pages publish no composition, density, flash point or SDS in the text we captured.

Every CSI price was checked on the live store on 7 October 2026, with stock checked per size. Every product and size offered here was in stock on that date; the CSI HyperDiffusion Base is out of stock and not offered. Page wording is quoted and attributed.

The carrier pair, the jar outcomes, the life window, the spread limit and the pass rule are labelled worked examples and judgement, not CSI test data. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.

Frequently asked questions

Why did my reed diffuser turn cloudy after adding fragrance oil?
Common reasons are that the oil is not fully soluble in one of the carriers at that load, moisture or contamination in a solvent lot, a cold room, or a wet bottle. Test the oil in each carrier alone to see which one is responsible.
How do I test if two diffuser solvents are compatible?
Mix them alone, without fragrance, at your exact ratio, and watch the jar for 24 to 72 hours against a dark background. Clear means they mix with each other; it says nothing yet about the oil.
Does mixing order matter for reed diffuser base?
It can. Make the full formula twice, once carriers first and once oil first, with the same stir time. If only one order clouds, adopt the other and confirm in bottles.
Will a cloudy reed diffuser still work?
It may still give off scent, but haze can mean something is not fully dissolved, which may change over time, and customers usually read it as a fault. Treat it as a fail until you know the cause.
Can DPG absorb water?
Glycol solvents can take up moisture from the air if containers are left open. If a sealed lot of the same carrier stays clear where an old opened drum clouds, the lot is the suspect; ask your supplier for its specification.
How long should I wait before deciding a diffuser blend is clear?
Look at 1 hour, 24 hours and 72 hours, then keep a sealed sample and keep watching for several weeks before you sell it. Clear on day one is necessary, not sufficient.
Find the culprit first
Nine jars and three days usually name the ingredient; three bottles per arm and 30 days prove the fix.
Fresh Strawberries for one oil lot, Lift Base as a reference, Gold 120 ML bottles, Black reeds and a 100 ML beaker: ₹3,616.20. Or the jar stage alone, ₹512.40. Send us your jar pattern on WhatsApp and we'll tell you what we'd test next.
Shop Fresh Strawberries Send my jar pattern
Editorial standards & sources
About this guide: part of CSI's cluster "Solvent Blends That Keep Failing" (8341–8360) in the reed diffuser formulation series. It covers identifying the cause of haze in a 20% two-carrier diffuser by a nine-jar elimination test (oil alone, carriers alone, oil in each carrier, mixing order, temperature, a reference base, a fresh lot), reading the pattern, and a 30-day bottle confirmation with the purchase step.

Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Fresh Strawberries, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Orchard Pear, Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g). They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Uchu Omoide, Sooraj R, snehal Chaudhary, Thenirvaofficial, Ranjita RAO. The reviews from Kavitha murthy are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.

Figures verified 7 October 2026, CSI live pricing: Fresh Strawberries 15 gm ₹113.28, 50 gm ₹212.40, 100 gm ₹377.60 (₹3.78 a gram), 500 gm ₹1,770.00 (₹3.54 a gram), 1 kg ₹3,540.00 (₹3.54 a gram); Lift Base 500 ml ₹1,099.00 (₹2.20 a ml); Gold Reed Diffuser Bottle 50 ML pack of 10 ₹826.00, 120 ML pack of 10 ₹1,062.00 (₹106.20 each); Fiber Diffuser Reeds (Black) 25 ₹236.00, 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00; Silicon Measuring Beaker 100 ML ₹300.00, 250 ML ₹600.00. All in stock on 7 October 2026; the CSI HyperDiffusion Base is out of stock. Per gram, per ml and per item = price ÷ units, two decimals.

Non-price figures: the reader's title gives 20% oil and two carriers; the DPG 50 g + DPM 30 g pair, the oil choice, the symptom details and all jar outcomes are labelled worked examples. Jar sizes, read times, the life window, the 15% spread limit, the sniff method and the pass rule are in-house examples. Three bottles per arm, 100 g fills and six 20.3 cm fibre reeds are the series method. Moisture uptake by glycol solvents is stated as a general, hedged tendency; no density, flash point, viscosity or evaporation figure is given for any material. Diwali 8 November 2026 and Christmas 25 December 2026 are calendar facts. Costs are materials only and exclude labour, freight, packaging and GST.
Back to blog