I Want to Make 20 Reed Diffuser Samples Using Three Different Bases — How Much of Each Base and Fragrance Oil Should I Purchase?

I Want to Make 20 Reed Diffuser Samples Using Three Different Bases — How Much of Each Base and Fragrance Oil Should I Purchase?

 

Reed bases 500 ml from ₹1,099.00 Pure Performance 100g sample ₹325.00 Gold 120 ML ₹106.20 a bottle in 10s
20 samples · three bases · how much to buy
Fill 18, keep 2 spare, and buy 480 g of each base and 180 g of each oil, rounded to the packs that leave least behind.
★★★★★
"Good product👍"
Sooraj RVerified buyer · Jul 2026
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
★★★★★
"Nice product"
snehal ChaudharyVerified buyer · May 2026
Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML)
★★★★☆
"Hey, the fragrance is so nice. Can’t wait to use in my candles!! A must buy item!!"
S.A.Jun 2024
Jasmine Fragrance Oil
★★★★☆
"Fragrance is awesome. Hot throw is also very good after burn candle."
AkanshaVerified buyer · Dec 2025
Lavender Fragrance Oil
★★★★☆
"Fragrances are pretty decent , quite versatile."
Tina RahaVerified buyer · Jun 2025
Lavender Fragrance Oil
★★★★★
"Quality of fragrance is very good. Cold through and hot though both are perfect."
Priyanka PurohitVerified buyer · Sep 2026
Lavender Fragrance Oil
Reviews collected and published through Judge.me on candlemakingsuppliesindia.store. They are general reviews of the products named on each card, not assessments of the advice set out below. Wording is unedited.
✓ Prices verified 7 October 2026, stock checked per size ✓ GST invoice; MSDS and IFRA documentation for oils on request ✓ We do not sell DPG, DPM, IPM or Augeo-type solvents
CSI Reed Diffusers · Trial Purchase Sheet
Twenty samples and three bases do not divide evenly, and the layout decides the order. Fill 18 in a three-base, two-oil grid with three bottles per cell, keep two spare, and buy 480 g of each base and 180 g of each oil, checked against the base's real weight per 500 ml.
₹8,561.00
three 500 ml bases, two oils × 2 × 100 gm, 20 Gold 120 ML bottles, 150 fibre reeds · CSI live pricing, October 2026
Quick answers — read this first
How much base and fragrance oil do I buy for 20 reed diffuser samples in three bases? Fill 18 of the 20 and keep 2 spare: three bases × two oils × three bottles. At one 100 g batch per 120 ml bottle and 20% oil (20 g oil + 80 g base), each base needs 480 g and each oil 180 g.

Which CSI packs does that round to? One 500 ml bottle per base, two 100 gm packs per oil, two 10-packs of Gold 120 ML bottles and 150 fibre reeds (100 + 50). With Pure Performance, Lift and Softness, plus Jasmine and Lavender, the order is ₹8,561.00, before tools.

Is one 500 ml bottle really enough for 480 g? Only if the base weighs at least 0.96 g per ml. CSI publishes no density, so weigh 100 ml first. At a worked 0.95 g/ml the bottle holds 475 g, 5 g short: cut each batch to 95 g instead of buying a second bottle.

What is left over? 20 g of each oil, roughly 20 g of each base at a worked 1.00 g/ml, 2 bottles and 6 reeds. That is enough for one re-pour per oil, not a second trial: that is the point.
The short answer
The split: 20 does not divide by three. 18 filled bottles (3 bases × 2 oils × 3 bottles) and 2 spares keeps every arm equal at three replicates.
The quantities: per base 480 g (6 × 80 g); per oil 180 g (9 × 20 g); each bottle one 100 g batch, weighed, labelled.
The pack rounding: 500 ml per base (check density), 2 × 100 gm per oil, 2 × 10 bottles, 100 + 50 reeds. Total ₹8,561.00; with the 250 ML beaker and scale ₹9,515.00.
The honesty: CSI does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol, and its base pages publish no composition, density or SDS. If one of your three bases is your own carrier, drop one CSI base: ₹7,462.00.
20 bottles, three bases, one order 120 ml bottles · one 100 g batch each · 20% oil = 20 g oil + 80 g base Jasmine × 3 Lavender × 3 Pure Performance 500 ML bottle 6 × 80 g = 480 g Lift Base 500 ml bottle 6 × 80 g = 480 g Softness Base 500 ml bottle 6 × 80 g = 480 g 2 spare bottles (20 − 18) unfilled: breakage or a re-pour Does one 500 ml bottle cover 480 g? Densities are worked examples. Weigh 100 ml of each base to know yours. 0.95 g/ml 475 g in the bottle short 5 g 1.00 g/ml 500 g in the bottle 20 g spare 1.05 g/ml 525 g in the bottle 45 g spare need: 480 g per base Jasmine 180 g used (9 × 20 g) 2 × 100 g pack · 20 g left Lavender 180 g used (9 × 20 g) 2 × 100 g pack · 20 g left
Top: the bench plan. Each of the three bases gets six 120 ml bottles, three with Jasmine and three with Lavender, each filled with its own 100 g batch at 20% oil, so each base supplies 480 g. Two of the reader's 20 bottles stay empty as spares. Middle: whether a single 500 ml bottle of base covers 480 g depends on a density no CSI base page publishes; at the worked 0.95 g/ml it falls 5 g short. Bottom: each oil needs 180 g, so two 100 gm packs leave 20 g. Densities are worked examples, not CSI data.
Straight answer
I want to make 20 reed diffuser samples using three different bases. How much of each base and fragrance oil should I purchase?
Decide the layout before the quantities, because the layout is the quantity. Fill 18 bottles and keep 2 spare: three bases × two oils × three bottles each, so every base meets the same two oils in three replicates. Make each bottle from its own 100 g batch at 20% oil by weight, 20 g oil + 80 g base. That gives 480 g of each base and 180 g of each oil. At CSI that rounds to one 500 ml bottle per base (provided the base weighs at least 0.96 g per ml: weigh 100 ml before you mix), two 100 gm packs of each oil, two 10-packs of Gold 120 ML bottles and 150 fibre reeds: ₹8,561.00 with Pure Performance, Lift, Softness, Jasmine and Lavender. If one of your three bases is your own DPG or DPM blend, that arm needs nothing from us and the order falls to ₹7,462.00. Buy nothing bigger until a 30-day test has picked a winner.
One line: 18 filled + 2 spare, one 100 g batch each at 20%: 480 g per base, 180 g per oil, rounded to 500 ml and 2 × 100 gm.
The three-base sheet, priced: three 500 ml bases ₹3,297.00 + Jasmine 2 × 100 gm ₹860.00 + Lavender 2 × 100 gm ₹1,080.00 + Gold 120 ML × 20 ₹2,124.00 + 150 black fibre reeds ₹1,200.00 = ₹8,561.00. Every line in stock on 7 October 2026.
Shop reed diffuser bases

Twenty bottles, three bases: the split that keeps arms equal

Twenty is your number. Three is your number. They do not divide, and that decides the order.

Your request, restated exactly: 20 reed diffuser samples, three different bases, and one purchase that covers the base and the fragrance oil for all of them. Everything else here is a labelled default from this series: 120 ml Gold bottles, one 100 g batch per bottle, 20% fragrance by weight, 6 fibre reeds per bottle, 30 days. If your figures differ, the method stays the same and only the arithmetic moves.

Twenty split three ways is 7, 7 and 6. That is a lopsided trial: one base has one fewer replicate, and with only one oil you cannot tell whether a base "won" or simply suited that oil. A better use of the same 20 bottles is a 3 × 2 grid with three bottles per cell: three bases, two oils, 18 bottles. The other 2 stay empty. They cover the bottle that cracks in the courier box, the one you knock over on day 9, or a re-pour if a batch is mis-weighed. A spare bottle you never fill is cheap insurance against a whole arm becoming two replicates.

Three ways to spend 20 bottles
Replicates per cell are what make a result believable · the recommended layout is the first row
Layout Filled Per cell What it can tell you What it can't
3 bases × 2 oils × 3 (+2 spare) 18 3 Whether a base wins across two oils, or only with one Anything about oils you didn't test
3 bases × 1 oil, 7 / 7 / 6 20 6–7 A tighter answer for one oil Whether the winner is general or oil-specific; arms are unequal
3 bases × 3 oils × 2 18 2 A wider scan Little: two bottles can't show you the spread between replicates

Why two oils from the same broad floral area? Because two of the three bases are positioned on their pages for florals. Lift's page names jasmine among its families; Softness's page names "lavender, jasmine, rose, peony". Pure Performance makes no family claim. Testing Jasmine and Lavender asks a precise question: does the page positioning hold for your oils, or does the neutral base do just as well? That is a hypothesis, not a promise from us. If your range leans woody, oud or amber, swap one floral base for Longevity Base (₹1,296.00), which its page positions for "oriental, woody, resinous, and balsamic" families; if it leans gourmand, Depth Base (₹1,099.00). How far family-matching is worth chasing at all is the one-carrier-or-several question; here it only changes which three bottles you buy.

If one of your three "bases" is your own carrier
Many makers comparing three bases mean "my DPG blend plus two ready-made bases". That arm needs nothing from us: you supply 480 g of your own carrier. CSI does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol. Our Isopropyl Alcohol Spray is a cleaner for tools, never a diffuser ingredient. With two CSI bases instead of three, the sheet is ₹7,462.00. And if your own carrier wins the 30 days, keep it.

The purchase sheet: grams per arm, packs, rupees

Work out grams per bottle, then grams per arm, and only then think in packs.

Formulate by weight, never by millilitres: oil and bases differ in density, and the percentage on your label is a weight percentage (why fair formulas are made by weight). One 100 g batch at 20% is 20 g of oil and 80 g of base. Mixing every bottle as its own batch costs a little more time than one big batch per arm, but your three replicates then include your own weighing error. That is honest: production will include it too.

Purchase sheet · 120 ml layout · CSI live pricing, October 2026
Grams from the layout, packs from the catalogue · excludes labour, freight, packaging and GST · all lines in stock on 7 October 2026
Line Calculation Need Buy ₹ Left after the test
Pure Performance 2 oils × 3 bottles × 80 g 480 g 500 ML × 1 ₹1,099.00 about 20 g at 1.00 g/ml
Lift Base same 480 g 500 ml × 1 ₹1,099.00 about 20 g at 1.00 g/ml
Softness Base same 480 g 500 ml × 1 ₹1,099.00 about 20 g at 1.00 g/ml
Jasmine 3 bases × 3 bottles × 20 g 180 g 100 gm × 2 ₹860.00 20 g
Lavender same 180 g 100 gm × 2 ₹1,080.00 20 g
Gold bottles 120 ML 18 filled + 2 spare 20 Pack of 10 × 2 ₹2,124.00 2 bottles
Fibre reeds (Black) 18 × 6 + one fresh set per arm (36) 144 100 + 50 ₹1,200.00 6 reeds
Total ₹8,561.00
Optional tools Silicon Measuring Beaker 250 ML + Weighing Scale 1 + 1 ₹954.00 reusable
Total with tools ₹9,515.00

Three pack decisions are worth a sentence each. Oils: 180 g fits two 100 gm packs with 20 g to spare, which is one re-pour of one bottle. Jasmine's two 100s (₹860.00) beat 100 + 2 × 50 (₹890.00) and four 50s (₹920.00); Lavender's 50 gm and 100 gm are the same per gram (₹5.40), so for Lavender the split doesn't matter. Reeds: 100 + 50 gives 150 for ₹1,200.00; six 25-packs would cost ₹1,416.00, and white reeds the same way ₹1,350.00. Bottles: two 10-packs are exactly your 20 at ₹106.20 each.

What a single sample costs in liquid, as a worked example at a labelled 1.00 g/ml: 80 g of base is about ₹175.84 at ₹2.20 a ml, and 20 g of Jasmine from a 100 gm pack is ₹86.00, so ₹261.84 per Jasmine bottle before the bottle and reeds. Whether a dearer base earns its keep per bottle is the extra-cost-per-bottle maths; this page only buys the trial.

Argued against our own interest: this order is ₹8,561.00 because you asked for three bases. If what you really want to know is whether any ready-made base beats your current carrier, you don't need three 500 ml bottles. One 100g Pure Performance sample (₹325.00) against your own carrier answers that first, and the cluster hub on a first comparison buy sets that smaller trial out. Come back to the three-base sheet when the first answer is yes.

Pack rounding and the density trap in a 500 ml bottle

You formulate in grams. We sell bases in millilitres. The bridge is a density nobody has given you.

Every CSI base except the Pure Performance sample is sold as 500 ml, and none of the base pages states a density. Your recipe asks for 480 g. Whether one bottle covers it depends entirely on how much 500 ml weighs, and diffuser carriers do not all weigh 1 g per ml. So before you pour a single batch, weigh 100 ml of each base in a tared beaker. Measure the volume with care: a silicone beaker's printed scale is a guide, so check it once against 100 g of water at room temperature. Divide grams by 100 and you have the figure this page can't give you.

Does one 500 ml bottle cover 480 g?
Densities are worked examples for illustration · not CSI data · weigh your own
Worked density 500 ml weighs Against 480 g What to do
0.95 g/ml 475 g 5 g short (you'd need 505.3 ml) Make 95 g batches (19 g oil + 76 g base): 456 g per base fits
1.00 g/ml 500 g 20 g spare Proceed; keep the spare for one re-pour
1.05 g/ml 525 g 45 g spare Proceed; enough for a sealed retain sample

The fix at the light end is not a second 500 ml bottle. Buying another ₹1,099.00 to cover a few grams leaves you nearly a full bottle of a base that may lose. Shrink every batch in every arm to 95 g instead: the ratio stays 20%, the comparison stays fair, and the bottles still hold far more than a month of liquid. For the Pure Performance arm alone there is another route, a 100g sample (₹325.00) as a top-up, but then that arm would be drawn from two packs, possibly from two lots. Avoid it: mixed lots inside one arm are a variable you didn't mean to test. The same rule applies to all three arms: batch size changes for everyone or for no one.

Weighing 100 ml also tells you something you will need later. When you scale a winner, base is bought in millilitres and formulated in grams, so the density you record now is what converts your production recipe into a number of 500 ml bottles (the 100 × 120 ml density calculation does that at scale, and the 1 kg Jasmine post for a fixed quantity of oil).

Pack rounding rules for this sheet
(1) Round each line to the smallest pack combination that covers the need, then check what that leaves. (2) Never round a base up to a second bottle for a shortfall you can absorb by shrinking batches evenly. (3) Leftover oil should cover one re-pour, not a second trial: 20 g does. (4) Buy bottles and reeds for the layout plus spares, never "a few extra in case": the reeds are flat per reed above 50, so extra reeds buy nothing but stock.

What makes a 20-sample trial lie: the cause table

You are spending ₹8,561.00 to learn one thing. These are the ways the bench can tell you something else.

A three-base trial is meant to answer "which carrier suits my oils". The weight losses and sniff notes you collect can also be caused by things that have nothing to do with the base. The table separates them, and the arms you have just bought are built to make most of them visible.

Cause table · differences between bases in a 20-bottle trial
Cause → what you'd see → discriminating check → fix · tendencies, not certainties
Cause What you'd see Discriminating check Fix
Carrier (the real effect) One base loses weight faster or smells stronger with both oils Same ranking in the Jasmine and Lavender columns, larger than the spread inside each cell This is the answer you paid for: shortlist that base
Oil character and load A base wins with Jasmine and loses with Lavender Rankings flip between the oil columns The result is oil-specific: retest the oils you sell; don't change the load to rescue a base
Solubility / stability Haze, layers or a ring after the 24–48 hour rest the base pages ask for Check the rested batch in a clear beaker against a light before filling Don't fill a hazy batch; record the failure as a result (the fair comparison protocol covers scoring)
Reeds One bottle in a cell races ahead or stalls Swap that bottle's reeds for a fresh set mid-test; see whether it rejoins the others Same reed colour, count and pack in every bottle; flip on the same day for all
Bottle and fill The heaviest-filled bottles lose most in absolute grams Compare g/day against start weight; check fills varied by more than a gram or two Fill by weight, record each start weight, keep fills equal
Environment Bottles nearest a window, AC vent or fan behave differently whatever the base Map positions; rotate positions every few days and see whether the effect follows the spot One shelf, one room, shuffled positions, temperature and humidity logged
Measurement error Day-to-day losses jump up and down; small differences between bases Weigh a sealed control bottle each time: if its weight "moves", your scale does Same scale, same time of day, reeds in or out consistently; judge only differences bigger than the replicate spread
Process and lot One arm mixed on a different day or from a different bottle behaves oddly Check your batch record: order of addition, rest time, lot Mix all 18 batches the same day, oil into base, same rest, one pack per base

Two rows decide whether you can believe the result. The oil row tells you whether a "best base" is general or only best for one oil, which is why this layout uses two. The measurement row tells you whether a difference is real: if Lift loses 0.2 g a day more than Softness but the three Lift bottles disagree with each other by 0.5 g a day, nothing has been shown. How to run the weight-loss method properly, with a sealed control, is the controlled evaporation test; the 30-day protocol is also set out in our 30-day weight-loss test.

The 30-day test you are buying for

The order is only right if the test is fixed first. Here is the test this order is sized for.

Each bottle is a labelled 100 g batch by weight (20 g oil + 80 g base), rested 24–48 hours as the base pages ask, filled into a weighed 120 ml Gold bottle, with 6 black fibre reeds, three bottles per cell, for 30 days. Mix all batches the same day so no arm gets a longer rest.

1
Label and weigh everything firstCode each bottle (PP-J1, LI-L3 and so on) so the sniff panel can be blind. Weigh each empty bottle with its cap, record it, then weigh each batch into its own clean, dry beaker: base first, then oil, stirred until clear.
2
Rest, inspect, fillRest every batch 24–48 hours covered. Hold each against a light: any haze, layer or ring is a result, not a nuisance, so write it down and fill only clear batches. Fill by weight and record the start weight of each bottle with its liquid.
3
Reeds in, same day, same wayInsert 6 reeds in every bottle at the same hour; flip all of them on the same days (the reed page suggests every 3–5 days), or none. Keep one sealed, reedless bottle as a scale check.
4
Weigh every 2–3 daysSame scale, same time of day, reeds handled the same way each time. Day 0 then about every 2–3 days to day 30: about 252 weighings across 18 bottles. Consumption = (start weight − weight today) ÷ days.
5
Sniff blind at a fixed distanceTwo or three people, codes only, the same distance and time of day each session (2 m from the shelf is a reasonable in-house choice), each scoring the room on a 1–5 scale they agreed before day 0. A 1–5 sniff score is your in-house method, not a lab measure.
6
Swap reeds once, mid-testAround day 14, put 6 fresh reeds into one bottle per cell (the 36 reeds bought for this). If that bottle jumps back up, its reeds had slowed; if not, the carrier is setting the pace.
7
Decide on day 30 with the rule you wrote on day 0Average the three bottles in each cell, note the spread, and apply your pass rule below. A base that passes with both oils goes forward; one that passes with only one is an oil-specific result.
Your pass rule (in-house, labelled, written on day 0)
An example to adapt, not a standard: (1) Stability: all three bottles clear, no layer or sediment at day 30. (2) Consumption: the cell's mean g/day sits inside your target window. Worked example: 100 g lasting 45–60 days is 1.67–2.22 g a day. (3) Throw: blind median sniff score at least as high as your current product, on most sessions after day 7. (4) Agreement: the three bottles in a cell agree closely enough that their spread is smaller than the difference you are claiming. All four, for both oils, or the base does not pass. These g/day figures are illustrative, not CSI test data.
Don't do this. Judge on day 2, when every fresh diffuser smells strong. Raise the oil to 25% in the arm you hoped would win: that changes two things at once, and the base pages' "10-30%" is a supplier's range, not a promise that more oil throws more. Change base, reed count and bottle at once: you will never know which mattered. Put the Lift bottles by the window because the shelf was full. Buy 5 litres of the early leader in week two: the shape of a diffuser's consumption curve is only clear after a few weeks.

Safety while you test, stated plainly: keep diffusers away from flames and heat sources and out of reach of children and pets; avoid skin and eye contact with oils and bases, and wipe spills from varnished surfaces quickly. Flammability, transport and labelling depend on the full formula. CSI base pages publish no SDS in the text we captured, so ask us on WhatsApp for whatever technical data exists, and get the SDS for your own solvents from their supplier. None of this is legal advice.

Leftovers, the purchase step after a pass, and the 50 ml variant

A good trial order leaves almost nothing behind. A good pilot order is sized from the winner, not from the trial.

After 30 days you should be holding roughly 20 g of each base at a worked 1.00 g/ml (less if it weighs light), 20 g of each oil, 2 empty bottles and 6 reeds. The two losing bases' leftovers are not waste if you sell other scents: retest them later with a woody or gourmand oil. But they are not stock you meant to buy, which is why this sheet keeps them small.

The purchase step after a pass

Say Lift passes with Jasmine. The next buy is a pilot of the exact product you'll sell, not a production order. Worked example, labelled: 20 bottles at 100 g each is 1,600 g of base and 400 g of oil. At a worked 1.00 g/ml, 1,600 g is 1,600 ml: four 500 ml bottles (₹4,396.00) cover it with a margin for losses. For oil, four Jasmine 100 gm packs (₹1,720.00) cost ₹241.00 less than one 500 gm (₹1,961.00) for a 400 g need, so the bigger pack is not automatically the cheaper buy. Bottles: two 10-packs again (₹2,124.00). If the pilot sells and re-tests well, the larger maths lives elsewhere: how big a pilot should be before a large base order, and one base in bulk for several scents. CSI publishes no lead times and lists no bulk tier above 500 ml: ask on WhatsApp before you plan around a date.

The 50 ml variant, and why it saves less than you think

Same 3 × 2 × 3 layout in 50 ML bottles
Worked fill 40 g per bottle (8 g oil + 32 g base) · 4 reeds per bottle · CSI live pricing, October 2026
Line Need Buy ₹
Pure Performance 192 g 100g × 2 (sold by weight, so no density question) ₹650.00
Lift + Softness 192 g each 500 ml × 2 ₹2,198.00
Jasmine + Lavender 72 g each 100 gm × 1 each ₹970.00
Gold 50 ML 18 + 2 Pack of 10 × 2 ₹1,652.00
Fibre reeds 96 Pack of 100 ₹800.00
Total ₹6,270.00

The 50 ml sheet is ₹2,291.00 cheaper, and only ₹472.00 of that is the bottles. The rest comes from the Pure Performance sample and from needing one oil pack instead of two. Lift and Softness still cost a full 500 ml each, so most of each bottle goes unused. The bigger problem is transfer. A 50 ml bottle with 20.3 cm reeds has a different reed-to-liquid ratio, a different fill height and a different neck exposure from the 120 ml product you'll sell. If you sell 120 ml, test in 120 ml. Use the 50 ml sheet only if 50 ml is your product.

Gifting dates are calendar facts, not deadlines to rush a test into. Diwali is 8 November 2026, 32 days from 7 October 2026: a 30-day trial plus the 24–48 hour rest started on parcel arrival cannot finish in time to make a festive batch. Plan this trial for Christmas (25 December 2026) and Valentine's Day (14 February 2027) gifting, and message us so stock is confirmed before you start.
WhatsApp a trial-then-pilot plan

What to buy, and what to leave on the shelf

Chosen on what the pages state, price, pack sizes and stock on 7 October 2026, not on performance: CSI publishes no diffusion data and nor do we. Each card says when not to buy.

1
base · neutral arm · the only reed base with a sample size
Pure Performance Reed Base Oil (100g / 500 ML)
The page describes it as "crystal-clear", formulated for "smooth even wicking" with "No added fixatives", and says "Blend with 10-30% fragrance oil". That makes it the natural neutral arm: whatever your oils do in it, they do without a base positioned for a family. It is also the only CSI reed diffuser base sold in a size below 500 ml. Limitation: the 100g is sold by weight and the 500 ML by volume, and no density is published, so you cannot compare them per gram until you weigh 100 ml yourself. At ₹3.25 a gram the sample is dearer than the 500 ML at any density near 1. For this 120 ml sheet you need 480 g: buy the 500 ML.
Size Price Unit price Sold by In this purchase sheet
100g ₹325.00 ₹3.25 per gram (sold by weight) only if your fill is 50 ml (two cover 192 g)
500 ML ₹1,099.00 ₹2.20 per ml (sold by volume) one per base for the 120 ml sheet (480 g)
One 500 ML for the 120 ml sheet: ₹1,099.00. Buy 500 ML — ₹1,099.00
2
base · floral and fresh arm · page positioning only
Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml)
Its page says it is "Best with floral, citrus, green, and fruity fragrance families" and names jasmine among them, and it describes the aim as helping oils "bloom, diffuse further". That is the page's positioning, not a test result, and it is exactly what this trial checks. Limitation: sold only as 500 ml, so a three-base trial cannot be done more cheaply on this arm. If your base weighs light, see the density check before you mix.
Size Price Per ml Sold by In this purchase sheet
500 ml ₹1,099.00 ₹2.20 per ml one bottle: 480 g of mix base, if it weighs at least 0.96 g/ml
3
base · soft floral arm · page positioning only
Softness Base – Professional Reed & Car Diffuser Base (500 ml)
Its page positions it for "soft florals, powdery musks, and light gourmand" and lists "lavender, jasmine, rose, peony", so it competes with Lift on both of this sheet's oils. That overlap is useful: it tests whether the page positioning means anything for your oils. Limitation: 500 ml only. If your range is woody or oud, test Longevity Base (₹1,296.00, ₹2.59 a ml) instead, which adds ₹197.00 to the order.
Size Price Per ml Sold by In this purchase sheet
500 ml ₹1,099.00 ₹2.20 per ml one bottle; swap for Longevity if you test woods
₹2.20 a ml, same as Lift. Buy Softness Base — ₹1,099.00
4
oil · white floral · page states 10-30% for reed diffusers
Jasmine Fragrance Oil
Notes on the page: "sweet, floral, and slightly musky". Its usage line reads "For reed diffusers, 10-30% of total base", so 20% sits inside the page's range (the candle load wording does not apply to diffusers). Pack rounding: two 100 gm packs (₹860.00) beat 100 + 2 × 50 (₹890.00) and four 50s (₹920.00). Argued against our own interest: the 500 gm is cheaper per gram, but 320 g would wait unused while you find out whether any base works, and it costs ₹1,101.00 more in cash today.
Size Price Per gram In this purchase sheet
15 gm ₹103.00 ₹6.87 too small: one batch is 20 g
50 gm ₹230.00 ₹4.60 dearer than 100 g per gram
100 gm ₹430.00 ₹4.30 buy two: 180 g needed, 20 g left
500 gm ₹1,961.00 ₹3.92 only after a pass: 320 g would sit unused
1 kg ₹3,923.00 ₹3.92 more than this test needs
Two 100 gm: ₹860.00, 20 g spare. Buy 100 gm — ₹430.00
5
oil · herbal floral · page states 10-30% for reed diffusers
Lavender Fragrance Oil
Page notes: "fresh lavender top notes, herbal green mid notes, and soft musk base"; usage line "For reed diffusers, use 10-30%". A second oil tells you whether a base result is about the base or about one oil. Limitation: the 50 gm and 100 gm cost the same per gram, so mixing sizes saves nothing, and Lavender is the dearer of the two oils on this sheet per gram.
Size Price Per gram In this purchase sheet
15 gm ₹105.02 ₹7.00 too small: one batch is 20 g
50 gm ₹270.00 ₹5.40 same per gram as 100 g
100 gm ₹540.00 ₹5.40 buy two: 180 g needed, 20 g left
500 gm ₹2,620.00 ₹5.24 only after a pass
1 kg ₹5,221.00 ₹5.22 more than this test needs
Two 100 gm: ₹1,080.00. Buy 100 gm — ₹540.00
6
bottle and reeds · identical in every arm
Gold Reed Diffuser Bottle Pack of 10 + Fiber Diffuser Reeds (Black)
Two 120 ML packs give exactly your 20 bottles: 18 filled and 2 spare. The bottle page also says "Size: 50 and 100ml" and states no neck size, so weigh one empty and fill by weight, not to a line. Reeds are 20.3 cm fibre (not rattan); the page says "6-8 reeds gives a good balance", so this sheet uses 6 in every bottle. Argued against our own interest: reeds are flat at ₹8.00 from the 50-pack up, so the 500-pack (₹4,000.00) saves nothing per reed.
Pack Price Per unit In this purchase sheet
50 ML Pack of 10 ₹826.00 ₹82.60 the 50 ml variant only
120 ML Pack of 10 ₹1,062.00 ₹106.20 buy two: 18 filled + 2 spare
Pack of 25 ₹236.00 ₹9.44 dearest per reed
Pack of 50 ₹400.00 ₹8.00 with the 100: 150 reeds
Pack of 100 ₹800.00 ₹8.00 with the 50: 144 used, 6 left
Pack of 500 ₹4,000.00 ₹8.00 same per reed: no saving
Bottles ₹2,124.00 + reeds ₹1,200.00. Buy 120 ML × 10 — ₹1,062.00

Leave on the shelf for now: CSI HyperDiffusion Base (out of stock on 7 October 2026); any 500 gm or 1 kg oil before a pass; the 500-pack of reeds; a second 500 ml of any base to cover a few grams; and the Room & Linen Spray Base or Perfume Base, which are not reed diffuser bases. For the order in which to choose oils from a wider range, see which candle oils to test in a new base.

The CSI principle
Fix the layout, then the grams, then the packs. Buy for the trial you will actually run, and nothing for the one you might run next.
For 20 samples and three bases: 18 filled + 2 spare, 480 g per base, 180 g per oil, ₹8,561.00 at CSI, density checked before the first batch.
"Twenty bottles can answer one question well or three questions badly. Decide which before you order."
— CandleMakingSuppliesIndia
Why trust this guide

CandleMakingSuppliesIndia sells the bases, oils, bottles and reeds named here. This page still tells you that we sell no DPG, DPM, IPM, Augeo-type solvent or perfumer's alcohol, that our base pages publish no composition, density, flash point or SDS in the text we captured, that the cheapest honest first step may be one 100g sample rather than three 500 ml bottles, and that a carrier of your own that wins your test should stay.

Every price was checked on the live store on 7 October 2026, with stock checked per size: CSI HyperDiffusion Base is out of stock and is not offered; every line in the purchase sheets is in stock on that date. Page wording is quoted and attributed as the page's description, not as a tested fact.

The layout, fills, densities, reed counts, loss allowances and pass-rule figures are labelled worked examples or in-house choices; the diagram is illustrative. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.

Frequently asked questions

How much reed diffuser base do I need for 20 samples?
Count only the filled bottles. With 18 bottles of 100 g at 20% oil, each takes 80 g of base, so 18 × 80 g across three bases is 480 g per base. Weigh 100 ml of each base before you mix, because bases are sold in millilitres.
How much fragrance oil for a reed diffuser sample at 20%?
20 g per 100 g batch. For nine bottles of one oil (three bases × three bottles) that is 180 g: two 100 gm packs, with 20 g left for a re-pour.
Is 500 ml of reed diffuser base 500 g?
Only if it weighs 1.00 g per ml, and no CSI base page states a density. Weigh 100 ml in a tared beaker; the result × 5 is what your 500 ml bottle holds in grams.
How many reed diffuser samples should I make per base?
At least three per oil per base, so you can see the spread between identical bottles. With 20 bottles, 18 in a 3 × 2 × 3 grid plus 2 spares is a better design than 7, 7 and 6 with one oil.
Can I test reed diffuser bases in 50 ml bottles to save money?
You can, for ₹6,270.00 against ₹8,561.00, but results from 50 ml may not transfer to a 120 ml product with the same 20.3 cm reeds. Test in the bottle you will sell.
Does CSI sell DPG or DPM for reed diffusers?
No. CSI sells ready-made reed diffuser bases, fibre reeds, bottles, beakers and fragrance oils, not DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol. If your own carrier is one of the three arms, buy two CSI bases, not three.
20 samples · three bases
18 filled, 2 spare, 480 g per base, 180 g per oil: one order, one 30-day answer.
The full 120 ml sheet is ₹8,561.00; with the beaker and scale, ₹9,515.00. If one arm is your own carrier, ₹7,462.00. Send us the sheet on WhatsApp and we will confirm every line is in stock before you pay.
Shop reed diffuser bases Confirm the sheet on WhatsApp
Editorial standards & sources
About this guide: part of CSI's series on reed diffuser formulation with DPG, DPM, IPM and Augeo-type carriers, cluster "Buying the Right Materials and Scaling" (8381–8400). It owns the purchase sheet for a 20-sample, three-base trial: the split, grams per base and oil, pack rounding, the density check, rupee totals and leftovers. Augeo is a trademark of another company (Solvay); "Augeo-type" describes a class of solvent and CSI does not sell it.

Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Jasmine Fragrance Oil, Lavender Fragrance Oil, Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml). They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Sooraj R, snehal Chaudhary, Akansha, Tina Raha, Priyanka Purohit. The reviews from S.A. are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.

Figures verified 7 October 2026, CSI live pricing: Pure Performance Reed Base Oil 100g ₹325.00, 500 ML ₹1,099.00; Lift Base ₹1,099.00; Softness Base ₹1,099.00; Depth Base ₹1,099.00; Longevity Base ₹1,296.00 (all 500 ml, ₹2.20 and ₹2.59 a ml); CSI HyperDiffusion Base ₹1,499.00 (out of stock); Jasmine Fragrance Oil 15 gm ₹103.00, 50 gm ₹230.00, 100 gm ₹430.00, 500 gm ₹1,961.00, 1 kg ₹3,923.00; Lavender Fragrance Oil 15 gm ₹105.02, 50 gm ₹270.00, 100 gm ₹540.00, 500 gm ₹2,620.00, 1 kg ₹5,221.00; Gold Reed Diffuser Bottle Pack of 10, 50 ML ₹826.00 (₹82.60 each), 120 ML ₹1,062.00 (₹106.20 each); Fiber Diffuser Reeds (Black) 25 ₹236.00, 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00; (White) 25 ₹265.00, 50 ₹450.00, 100 ₹900.00, 500 ₹4,500.00; Silicon Measuring Beaker 100 ML ₹300.00, 250 ML ₹600.00; Candle Making Weighing Scale ₹354.00; Isopropyl Alcohol Spray 150 ML ₹383.00 (a cleaner, not a diffuser ingredient). Per gram and per ml = price ÷ quantity, two decimals.

Non-price figures: "20 samples" and "three bases" are the reader's figures (title). The 120 ml bottle, 100 g batch, 20% load by weight, 6 reeds, 3 bottles per cell, 30 days and weighing every 2–3 days are this series' labelled defaults. Densities of 0.95, 1.00 and 1.05 g/ml, the 95 g fallback batch, the 40 g 50 ml fill, the 45–60 day target window, the 2 m sniff distance, the 1–5 score and the 20-bottle pilot are worked examples or in-house choices. "Blend with 10-30% fragrance oil", the 24–48 hour rest and each base's family positioning are the pages' own wording. No performance figure on this page is CSI test data. Costs are materials only and exclude labour, freight, packaging and GST. Diwali, Christmas and Valentine's Day dates are calendar facts.
Zurück zum Blog