How Do I Choose Between DPG, DPM, IPM and an Augeo-Type Reed Diffuser Base Using Controlled Tests for Solubility, Wicking, Throw, Evaporation, Stability and Cost?
शेयर करना
How many arms and bottles? One oil at 20%, five arms (the four solvents plus a ready-made base as a reference), three bottles each, clarity jars and reed-uptake jars, 30 days of weights and blind sniffs.
Why weights and gates? A total score can hide a fatal flaw, so must-haves are gates, not points. And the weights decide the winner: in the worked example, a throw-first profile picks the Augeo-type arm and a cost-first profile picks DPM.
What does CSI supply? Not the solvents. The oil, a base arm, reeds, bottles and tools: ₹4,655.00 for the CSI side with your own bottles.
- Straight answer: gates first, weighted scores second
- The selection system in one page
- The five gates: must-haves, not points
- The scored criteria, scales and weights
- Why arms differ: the cause table
- The bench: five arms by weight
- A worked illustrative example, and the decision
- The purchase step
- What to buy for the test, and what to skip
- Frequently asked questions
The selection system in one page
Most carrier comparisons fail in the same way: the maker mixes, waits, sniffs, and then decides what mattered. The bottle that smelled best on the day wins, and a month later the range is hazy in winter or empty in three weeks. A selection system turns that around: you decide what matters, how it is measured and how it is weighed, then you let the results choose.
The single-carrier version of this, a DPG base against ready-made options with a simpler 0–2 score, is the five-stage DPG scorecard post. This post is the full system across four solvents, with weights, profiles and a sensitivity check. The cluster's short answer on which carrier to test first is the cluster hub.
The five gates: must-haves, not points
| Gate | When | Pass line | Removes |
|---|---|---|---|
| G1 · Documents | Before mixing | SDS on file; hazard class acceptable for your storage, courier and labels | Any carrier without an SDS you can work with |
| G2 · Solubility | Week −1 to day 14 | Clear at room, warm and cool for 14 days; no layers or sediment | Haze in any jar at your load |
| G3 · Wicking | Week −1, 24 h | Reed uptake at 24 h at least half the fastest arm's (your threshold) | Reeds that barely drink |
| G4 · Minimum throw | Day 14 | Blind median at 1 m at least 2 of 5 (your floor) | A bottle nobody can smell, however long it lasts |
| G5 · Stability in the bottle | Day 30 | No haze, layers, sediment, colour shift or cap damage | A formula that changes on the shelf |
G1 documents comes first because it costs nothing and can end an arm before you mix: a solvent with no SDS, or with a hazard classification your courier or labels can't accommodate, is out. Read sections 2, 9 and 14 for each solvent; this post quotes no flash points, viscosities or evaporation rates for any material. For the CSI arm, the base page states no composition, density, flash point or SDS in the text we captured, so G1 means asking us on WhatsApp and recording the answer.
G4 minimum throw is the gate most makers forget. Without it, a slow carrier can win on cost, consistency and life while barely scenting a room. In the worked example DPG releases about 1.1 g a day, a bottle life of roughly 82 days, and would score well on several criteria; it fails G4 with a blind median of 1.5, so it never reaches scoring. If long life is your product, write a different band and a lower throw floor, and accept the trade-off openly; product life against throw is explored in the life-versus-throw post.
The scored criteria, scales and weights
| Criterion | Measured as | Scale |
|---|---|---|
| Throw | Blind median at 1 m, days 7/14/28 | 1 = median 2.0 · 3 = 2.5 · 4 = 3.0 · 5 = 3.5 or more |
| Release | Mean g/day, days 3–30 | 5 = inside 2–3 g · 3 = within 0.3 g of the band · 1 = further out |
| Consistency | Spread of the three bottles | 5 = within ±10% of their mean · 4 = ±20% · 2 = ±30% · 1 = wider |
| Cost | Liquid per bottle at your prices | 5 = ₹150.00 or less · 4 = ₹200.00 · 3 = ₹250.00 · 2 = ₹300.00 · 1 = more |
| Carrier odour | Blind blotter of the carrier alone, 1 h and 24 h | 5 = not noticed · 3 = noticed, neutral · 1 = clashes with the scent |
Weights come from what you sell. A strong-room product weights throw; a budget range weights cost; a gift line might weight consistency because every bottle must match. Write your main profile and two alternatives before day 0. The alternatives aren't for picking the answer you like; they show whether your answer is robust.
| Profile | Throw | Release | Consistency | Cost | Odour |
|---|---|---|---|---|---|
| Throw first | 40 | 20 | 15 | 15 | 10 |
| Cost first | 20 | 20 | 15 | 35 | 10 |
| Balanced | 30 | 20 | 20 | 20 | 10 |
Cost per bottle uses your prices. With Bergamot Amber at its 1 kg price (₹5.44 a gram, ₹108.80 a bottle) and placeholder solvent prices of ₹300.00 (DPG), ₹400.00 (DPM), ₹600.00 (IPM) and ₹900.00 (Augeo-type) a kg, the liquid per bottle is ₹132.80, ₹140.80, ₹156.80 and ₹180.80. A ₹1,099.00 CSI base at ₹2.20 a ml adds ₹175.84 of carrier, ₹284.64 a bottle. The solvent prices are placeholders, not quotes: put yours in. Material costs exclude labour, freight, packaging and GST.
Why arms differ: the cause table
This is what makers commonly report, not CSI test data. A difference between arms is only the carrier's if the other rows are held still.
| Cause | What you would see | Discriminating check | Fix |
|---|---|---|---|
| Solvent choice: volatility | Release far below or above band | Carrier-only blank of that solvent | Another carrier or a blend; not more oil |
| Solvent choice: viscosity | Slow 24 h uptake | Uptake jar of the carrier alone vs with oil | Thinner carrier; check the oil too |
| Fragrance load or oil character | All carriers weak, or all hazy | Same arms with a second, lighter oil | Change the load as a separate test |
| Reeds, bottle, fill | One bottle out of line in an arm | Fresh-reed swap; fill weight check | Same lot, fill and neck everywhere |
| Environment | All arms move together with the weather | Room log at every weighing | Judge arms on the same days, rotated |
| Measurement error | Scores that jump between readings | Scale check; blind codes; two noses | Fix the method; don't re-weight to rescue an arm |
The held-constant list and the three-arm protocol are covered in the same-bottle, same-reed comparison post; what to record across 30 days for many blends is the five-blend record post. IPM's usual role, a minor modifier at most, is explained in the IPM-as-only-carrier post.
The bench: five arms by weight
Five arms, fifteen bottles, fifteen clarity jars and five uptake jars, all from one oil lot, one reed pack and one bottle batch. Label every bottle and jar with a code on the base, not the arm name, and keep the key with a helper until day 30. Write the oil lot, each solvent lot and the room temperature on the batch sheet before you mix; if a later lot of the winning carrier behaves differently, those notes are how you'll know.
| Arm | Per bottle | Jars | Gate most at risk (tendency) |
|---|---|---|---|
| A · DPG | 20 g oil + 80 g DPG | 3 clarity + 1 uptake | G4 throw (slow release) |
| B · DPM | 20 g oil + 80 g DPM | 3 clarity + 1 uptake | Release above band; odour |
| C · IPM | 20 g oil + 80 g IPM | 3 clarity + 1 uptake | G3 wicking; residue |
| D · Augeo-type | 20 g oil + 80 g Augeo-type | 3 clarity + 1 uptake | Varies by product: test |
| E · CSI base | 20 g oil + 80 g Pure Performance | 3 clarity + 1 uptake | G1 documents (ask); cost score |
Every bottle: tared beaker, 20 g oil then 80 g carrier, the same stir, 24–48 hours rest, filled to a labelled 100 g in a 120 ml bottle, six reeds from one pack. Clarity jars: 4 g oil + 16 g carrier at room temperature, on a warm shelf and on a cool one. Uptake jars: 20 g of each finished mix, three weighed reeds, reweighed at 24 hours. Weigh the bottles every 2–3 days for 30 days; sniff blind at 1 m on days 3, 7, 14 and 28. The weight-loss method in detail is the controlled evaporation post, and our live guide on testing over 30 days has a log sheet.
A worked illustrative example, and the decision
Illustrative, not CSI test data. All five arms pass G1 and G2. C · IPM fails G3: its reeds take up a fraction of the fastest arm's liquid in 24 hours. A · DPG passes G3 but fails G4 with a blind median of 1.5. B, D and E pass every gate, release inside the band and are scored:
| Arm | Throw | Release | Consist. | Cost | Odour | Throw first | Cost first | Balanced |
|---|---|---|---|---|---|---|---|---|
| B · DPM | 4 | 5 | 4 | 5 | 3 | 4.25 | 4.45 | 4.30 |
| D · Augeo-type | 5 | 5 | 4 | 4 | 4 | 4.60 | 4.40 | 4.50 |
| E · CSI base | 4 | 5 | 5 | 2 | 4 | 4.05 | 3.65 | 4.00 |
| A · DPG | out at G4 | — | — | — | — | — | — | — |
| C · IPM | out at G3 | — | — | — | — | — | — | — |
Reading it. Under the throw-first and balanced profiles the Augeo-type arm wins (4.60 and 4.50). Under cost-first, DPM edges it, 4.45 against 4.40: a gap of 0.05, under the 0.25 tie line, so the rule sends it to documents, supply and cost, where DPM (cheaper at the placeholder prices) would take it if its documents are as good. The CSI base passes every gate and scores well on throw, release and consistency, but its liquid cost holds it in third place under every profile. If your profile is throw-first, the answer is the Augeo-type arm; if it is cost-first, the honest answer is "DPM or Augeo-type, decided by paperwork and price".
The purchase step
A first run of 100 bottles at 20%: 2,000 g of Bergamot Amber. Four 500 gm (₹10,872.00) cost ₹2.00 less than two 1 kg (₹10,874.00). Reeds: six packs of 100 (₹4,800.00). Bottles: ten Gold 120 ML packs (₹10,620.00). If a solvent arm won, the CSI side is ₹26,292.00 and the solvent comes from your supplier. If the CSI base won and its documents satisfied G1: sixteen 500 ML (₹17,584.00) for 8,000 ml once you've weighed 100 ml, ₹43,876.00 in all. CSI lists no 25 kg base; ask on WhatsApp about larger volumes.
What we don't sell, and what our pages don't say. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol. Augeo is a brand name of Solvay, another company's trademark; "Augeo-type" describes the solvent class. The only alcohol in our catalogue is an Isopropyl Alcohol Spray, a cleaner, never a diffuser ingredient. Every in-stock CSI base page says "Blend with 10-30% fragrance oil"; none states composition, density, flash point, SDS or IFRA information in the text we captured.
Safety, plainly. Treat every solvent and finished formula as flammable until its SDS says otherwise; store and mix away from flames and heaters, with ventilation. Wear gloves and eye protection; wash skin contact off with soap and water. Keep solvents, test jars and diffusers out of reach of children and pets, and wipe spills from varnished surfaces at once. Hazard labelling and courier rules depend on the full formula and where you sell; the safety-documentation post covers what to review. This is not legal advice.
What to buy for the test, and what to skip
Chosen on page statements, price and stock on 7 October 2026, not on performance data; CSI publishes none for its bases, reeds or bottles. Each card says when not to buy.
| Size | Price | Per gram | For this test |
|---|---|---|---|
| 15 gm | ₹105.02 | ₹7.00 | blotters only |
| 50 gm | ₹280.00 | ₹5.60 | with four 100 gm |
| 100 gm | ₹560.00 | ₹5.60 | buy four: with a 50 gm, 450 g for 380 g |
| 500 gm | ₹2,718.00 | ₹5.44 | ₹198.00 more than the 100 + 50 route for this test |
| 1 kg | ₹5,437.00 | ₹5.44 | same per gram as the 500 gm; production |
| Size | Price | Unit price | For this test |
|---|---|---|---|
| 100g | ₹325.00 | ₹3.25 a gram | four would cost ₹201.00 more than the 500 ML |
| 500 ML | ₹1,099.00 | ₹2.20 a ml | one: 304 g needed |
| Pack | Price | Per reed | For this test |
|---|---|---|---|
| Pack of 25 | ₹236.00 | ₹9.44 | with the 100 |
| Pack of 50 | ₹400.00 | ₹8.00 | not needed |
| Pack of 100 | ₹800.00 | ₹8.00 | with the 25: 105 needed, 20 spare |
| Pack of 500 | ₹4,000.00 | ₹8.00 | production only |
| Variant | Price | Per bottle | For this test |
|---|---|---|---|
| 120 ML · Pack of 10 | ₹1,062.00 | ₹106.20 | two packs for 15 bottles |
| 50 ML · Pack of 10 | ₹826.00 | ₹82.60 | not this test |
| Item | Price | Units | Use |
|---|---|---|---|
| Weighing scale | ₹354.00 | one | check it reads 0.1 g; use 0.01 g for reed uptake |
| Silicon Measuring Beaker 100 ML | ₹300.00 | one | tared mixing, 100 g batches |
Skip: a second CSI base in the same test (one reference arm is enough; positioning by family is a later question, covered in the one-carrier-or-several post); the CSI HyperDiffusion Base™, out of stock on 7 October 2026; the Room & Linen Spray Base, which is not a reed base. With bottles, beaker and scale, the CSI side is ₹7,433.00.
CandleMakingSuppliesIndia sells the oil, base, reeds, bottles and tools named here. It does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol, and in this guide's worked example its own base finishes third.
Every CSI price was checked on 7 October 2026, with stock checked per variant; the CSI HyperDiffusion Base™ is out of stock and not offered. Solvent prices are labelled placeholders.
Gates, scales, weights, the tie line and every score are worked or illustrative examples; nothing here is CSI test data, and solvent behaviour is described as hedged tendencies without numeric flash points, viscosities, densities or evaporation rates. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Have DPG, DPM and IPM in My Workshop — Which One Should I Test First as a Reed Diffuser Carrier, and What Properties Should Guide the Choice?
- I Want to Make a Reed Diffuser Using DPM Instead of DPG — What Differences in Wicking, Fragrance Solubility and Evaporation Should I Measure?
- I Want to Use IPM in a Reed Diffuser Formula — How Do I Evaluate Whether It Is Compatible with My Fragrance Oil and Suitable for Reed Wicking?
- Can I Use IPM as the Only Carrier in a Reed Diffuser, or Should I Compare It Against Bases Specifically Designed for Passive Diffusion?
- I Made Three Reed Diffusers Using DPG, DPM and an Augeo-Type Base at 20% Fragrance — How Do I Compare Them Using the Same Bottle and Reeds?
- My Augeo-Type Base Produces Better Throw Than DPG but Consumes Liquid Faster — How Do I Decide Which Formula Is Better for a Commercial Product?
- I Have Two Commercial Reed Diffuser Bases with Different Solvent Compositions — How Do I Compare Their Performance Without Knowing Every Proprietary Ingredient?
- I Want to Make a Reed Diffuser Without Ethanol — Which Technical Properties Should I Look for When Comparing DPM and Alcohol-Free Ready-Made Bases?
- My Ready-Made Reed Diffuser Base Is More Expensive Than DPM — How Do I Calculate Whether Better Throw or Lower Fragrance Usage Justifies the Difference?
- I Am Making 100 ml Reed Diffusers with Several Fragrances — Should I Use One Carrier System for Every Scent or Qualify Different Bases?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Blue Ocean Fragrance Oil, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lavender Fragrance Oil, Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Room & Linen Spray Base – Fast-Dry, Zero-Residue (500 g), Woody Oud Fragrance Oil. They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Sooraj R, snehal Chaudhary, Thenirvaofficial, Akansha, Yashvi Shah, Renam Dhoundiyal. Reviews below five stars are included as published, not filtered out.
Figures verified 7 October 2026, CSI live pricing: Bergamot Amber Fragrance Oil 15 gm ₹105.02 (₹7.00 a gram), 50 gm ₹280.00 and 100 gm ₹560.00 (₹5.60 a gram), 500 gm ₹2,718.00 and 1 kg ₹5,437.00 (₹5.44 a gram); Pure Performance Reed Base Oil 100g ₹325.00, 500 ML ₹1,099.00 (₹2.20 a ml); CSI HyperDiffusion Base™ ₹1,499.00 (out of stock); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed from 50 up); Gold Reed Diffuser Bottle Pack of 10, 120 ML ₹1,062.00 (₹106.20 each), 50 ML ₹826.00; Candle Making Weighing Scale ₹354.00; Silicon Measuring Beaker 100 ML ₹300.00. Per unit = price ÷ units, two decimals. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol.
Non-price figures: the four solvents and six test areas are the reader's; Bergamot Amber at 20 g + 80 g, five arms, the band, gate thresholds, scoring scales, weight profiles, the 0.25 tie line, the solvent prices per kg and the 100-bottle run are worked examples; all scores, medians and g/day figures are illustrative, not CSI test data. Base ml are treated as grams only after you weigh 100 ml. Solvent properties are general tendencies; no numeric flash points, viscosities, densities or evaporation rates are quoted. "10-30% for reed diffusers", the oil's notes, "No added fixatives", "smooth even wicking", "Blend with 10-30% fragrance oil", "Superior capillary action", "grams or ounces" and "Size: 50 and 100ml" are page wording. Augeo is a trademark of Solvay. Costs exclude labour, freight, packaging and GST. Christmas 25 December 2026 and the winter months are calendar facts.