I Made Two 100 g Reed Diffuser Batches, One with DPG and One with a Ready-Made Base — How Do I Compare Their Actual Diffusion Performance?
शेयर करना
I only have 100 g of each. Is that enough? For a first look, yes: split each into three 30 g fills in identical 50 ml bottles with 3 reeds each, and keep 10 g back as a stability sample. For a product decision, remake 300 g per arm and test in the 120 ml bottle you sell.
What do I measure? Weight of every bottle every 3 days (g/day), blind sniff scores on days 1, 3, 7, 14, 21 and 30 with the arms swapping rooms, clarity in a retained jar, and reed-tip condition. Decide at day 30.
What does it cost at CSI? Option 1: Gold 50 ML pack ₹826.00 + fibre reeds 25 ₹236.00 = ₹1,062.00. Option 2 with your own base: ₹1,462.00; with Pure Performance as the base arm, ₹2,437.00. CSI doesn't sell DPG.
- Straight answer: how to compare them
- Why your two batches can't be compared yet
- What must match: the control sheet
- What a gap between the arms can and can't tell you
- Three bottles from a 100 g batch: two options
- The 30-day protocol, step by step
- The scoring sheet, and when a difference is real
- What each result means, and the purchase step
- What to buy for this comparison
- Frequently asked questions
Why your two batches can't be compared yet
Your situation, restated: two batches of 100 g each. One is fragrance oil in DPG; the other is fragrance oil in a ready-made base. You want to know which actually diffuses better. You haven't told us the oil or percentage, so the worked example uses 20 g oil + 80 g carrier in each, labelled. What matters is that the two are identical except for the carrier.
Here is what usually goes wrong. One bottle per arm. Two bottles of the same formula can differ in weight loss by a noticeable fraction because of reed fit, a warmer spot on the shelf, or a reed that wicks badly. With one bottle each, you can't tell a carrier difference from bottle-to-bottle noise. The maker sniffs. You know which bottle is which and you have a reason to prefer one. Noses are suggestible; blind coding fixes that cheaply. Room effects. The bottle in the bedroom and the bottle in the hall are in different experiments. Mismatched batches. The ready-made base page said "25-30%", so that batch got more oil. Now you're testing load and carrier together. Day-two verdicts. Reeds saturate in the first days, and early impressions are mostly about that.
None of this needs a laboratory. It needs a scale, six identical bottles, one pack of reeds, a helper with a pen and thirty days. This page is the protocol for exactly two arms. If you want to put DPG, DPM and an Augeo-type solvent side by side, that is the three-carrier comparison; a full scorecard that also weighs cost and solubility is the stop-guessing scorecard post.
What must match: the control sheet
| Variable | Must match | Common mismatch | What to do |
|---|---|---|---|
| Fragrance oil | Same oil, same bottle of it (same lot), same grams | Two different oils, or a fresh lot for one arm | Check your notes. If you used different oils, remake |
| Load | 20 g in 100 g in both (or your own %, identical) | DPG at 20%, base at 25% "because the page says 25–30%" | Match the % first; load is a separate test |
| Mixing and rest | Same order, stir time, temperature, and 24–48 hour rest | One mixed today, one last month | Remake the older one, or rest the newer one to match |
| Bottle | Identical glass, neck and fill weight | A 120 ml jar against a 50 ml bottle | Same bottle type for both arms |
| Reeds | One pack, same count and length, fresh | Five reeds against eight; used reeds in one | Fresh reeds from one pack |
| Room and position | Same shelf, rotated; same sniff rooms, swapped | One by the AC vent, one by the window | Rotate positions; swap rooms (diagram) |
| Start time | Reeds into both arms within minutes | Base arm started three days later | Same day, same hour |
| Observer | Coded bottles, scores written before unblinding | You know which is yours and want it to win | A helper codes; key sealed till day 30 |
The load row matters most. Ready-made base pages, ours included, give a range ("Blend with 10-30% fragrance oil") and often suggest working at 25–30%. If your DPG batch is at 20% and your base batch at 25%, the base gets 25% more fragrance to release, and any win is partly a load win. Compare at the same percentage first. Whether more oil helps is a separate question, and often a disappointing one (see the lavender load post).
What a gap between the arms can and can't tell you
A fair test isolates the carrier; it doesn't explain it. When the two arms differ, the cause still sits in one of a few places. The table separates them so you know which extra check to add if the result surprises you. Evidence is what you'd commonly see, not CSI test data.
| Cause | What you would see | Discriminating check | Fix |
|---|---|---|---|
| Carrier volatility | Base arm loses more g/day and scores higher at 1 m | Carrier-only bottles (no oil) of each, weighed the same way | Choose the carrier that releases inside your target rate |
| Carrier viscosity | DPG arm's reed tips stay pale for days | Time for the liquid to reach the tip in each arm | Lower-viscosity carrier, or a DPG blend (the viscosity post) |
| Solubility / stability | One arm hazes, layers or leaves film; scores drift | Retained jars at room, warm and cool | Reject the unstable arm, whatever it scored |
| Fragrance composition and load | Both arms weak; or the gap shrinks with a lighter oil | Repeat the two arms with a second, lighter oil | The oil, not the carrier; load is a separate test |
| Reeds | One bottle per arm far off its siblings | Fresh reeds in that bottle mid-test | Reed pack and fit; replace and note |
| Bottle and fill | Rates track fill weight, not arm | Weigh every fill on day 0 | Identical bottles, identical fills |
| Room and climate | Scores follow the room, not the code | Room swap built in (diagram) | Swap rooms; log °C and RH |
| Process | The older batch behaves differently | Remake both on one day | Same mixing order, stir and rest |
| Measurement error | Whole-gram readings; scores written after unblinding | A known weight on the scale; sealed key | 0.1 g or better; scores before the key |
Three bottles from a 100 g batch: two options
Option 1 · split what you already made
Weigh three fills of 30 g from each batch into identical 50 ml bottles and seal the remaining 10 g in a small clear glass jar as your retained stability sample. Use 3 fresh reeds per bottle in both arms. That is 6 bottles and 18 reeds: a Gold 50 ML pack (₹826.00, 4 bottles spare) and one pack of 25 reeds (₹236.00, 7 spare), ₹1,062.00 in all. It is cheap and quick, and it is fair, because both arms get the same treatment.
Its limit is that it tells you which carrier releases faster in a small bottle with three reeds. It doesn't tell you how your 120 ml product will behave or last. The ranking usually carries over; the absolute g/day and the life don't. Use option 1 to decide whether option 2 is worth doing.
Option 2 · remake at product scale
Make a 300 g master batch per arm (60 g oil + 240 g carrier, by weight, same day, same rest) and fill three 120 ml bottles at 100 g each with 5 reeds. You need 120 g of oil in total. The CSI side: one Gold 120 ML pack (₹1,062.00, 4 spare) and one pack of 50 reeds (₹400.00). For 30 reeds, the 50 is ₹72.00 cheaper than two packs of 25. That is ₹1,462.00 if your base arm uses the base you already have. If you are choosing a CSI base for the base arm: Pure Performance needs three 100g samples (₹975.00), ₹2,437.00 in all, or Lift Base comes only in 500 ml (₹1,099.00), ₹2,561.00 in all.
The 30-day protocol, step by step
The scoring sheet, and when a difference is real
| Day | Bottle code | Weight (g) | g/day since last | Doorway score (0–5) | 1 m score (0–5) | Clear? Layers? Film? | Reed tips | Room °C / RH |
|---|---|---|---|---|---|---|---|---|
| 0 | K1 | ___ | — | — | — | Clear | Pale | ___ |
| 3 | K1 | ___ | ___ | — | — | ___ | ___ | ___ |
| 7 | K1 | ___ | ___ | ___ | ___ | ___ | ___ | ___ |
| … | all six | … | … | … | … | … | … | … |
When is a difference real? Use the plain rule above: the gap between means must beat the spread inside each arm. Worked example, illustrative and not CSI data: the DPG bottles run at 1.38, 1.50 and 1.62 g/day (mean 1.50, range 0.24); the base bottles at 1.95, 2.10 and 2.31 (mean 2.12, range 0.36). The gap of 0.62 g/day is larger than both ranges, and the slowest base bottle still beats the fastest DPG bottle by 0.33 g/day. That is a real rate difference by this rule. If instead the arms overlap (one DPG bottle faster than one base bottle), you have no rate verdict, however tempting the averages look.
Faster isn't automatically better. If your target is a 60-day product with 90.00 g usable, you want about 1.50 g/day. In the worked example the DPG arm is closer to that than the base arm, which would empty sooner. If the base arm also wins the blind sniff, you may still prefer it at a lower load or with fewer reeds. That is a second test, not a conclusion from this one. Life-versus-throw is the three-month balance post.
Read the sniff scores as preferences, not measurements. A 0–5 score from three people is a structured opinion, useful because it's blind and repeated. The paired question ("which room smelled stronger?") is usually more reliable than the numbers. For a deeper treatment of the 30-day log, our live guide on testing a reed diffuser over 30 days goes further, and the evaporation method itself is the controlled evaporation-test post.
What each result means, and the purchase step
| Rate | Throw | Stability | What it means | Decision |
|---|---|---|---|---|
| Base faster | Base preferred | Both pass | The base releases more fragrance with your oil | Switch for this oil; check the life against your target; repeat with your next oil |
| Base faster | No preference | Both pass | The base empties faster without smelling stronger | Stay with DPG, or test the base at a lower load (oil cost falls) |
| No difference | Either | Both pass | The carrier isn't what limits this diffuser | Look at oil, load, reeds or room: the cluster hub lays out the order |
| DPG faster or equal | DPG preferred | Both pass | Your DPG formula is the better one here | Keep DPG. Spend nothing on a base |
| Any | Any | One fails | The unstable arm isn't a product | Reject it however it scored; check physical compatibility |
The purchase step after a pass
Worked example, labelled: the base wins on all four rules, and you plan a first run of 40 diffusers at 100 g (20 g oil + 80 g base) with 5 reeds. You need 3,200 g of base. CSI bases are sold by volume and their pages give no density, so weigh 100 ml of the base before you order. If it comes out near 1.0 g per ml, 7 × 500 ml (₹7,693.00) covers it. Add 200 reeds as 2 × 100 (₹1,600.00) and four Gold 120 ML packs (₹4,248.00): ₹13,541.00, or ₹338.52 a bottle before oil. These are materials only, excluding labour, freight, packaging and GST. Test the first three bottles of the production lot for two weeks before you fill the rest: a new pack of base is a new lot.
What to buy for this comparison
Chosen for this comparison on page statements, price and stock on 7 October 2026. CSI publishes no performance data for its bases or reeds, which is why you are running this test. Each card says when not to buy.
| Pack | Price | Per bottle | For this test |
|---|---|---|---|
| 50 ML Pack of 10 | ₹826.00 | ₹82.60 | option 1: six bottles of 30 g, 4 spare |
| 120 ML Pack of 10 | ₹1,062.00 | ₹106.20 | option 2: six bottles of 100 g, 4 spare |
| Pack | Price | Per reed | For this test |
|---|---|---|---|
| Pack of 25 | ₹236.00 | ₹9.44 | option 1: 18 reeds, 7 spare |
| Pack of 50 | ₹400.00 | ₹8.00 | option 2: 30 reeds; cheaper than two 25s (₹472.00) |
| Pack of 100 | ₹800.00 | ₹8.00 | same per reed as 50: production |
| Pack of 500 | ₹4,000.00 | ₹8.00 | same per reed: no saving |
| Size | Price | Unit price | For this test |
|---|---|---|---|
| 100g | ₹325.00 | ₹3.25 a gram | three of them (₹975.00) make one 240 g base arm |
| 500 ML | ₹1,099.00 | ₹2.20 a ml | only after the base arm passes |
| Size | Price | Per ml | For this test |
|---|---|---|---|
| 500 ml | ₹1,099.00 | ₹2.20 a ml | no sample size: one bottle covers the arm and leaves about 260 ml, worth ₹571.48 at the ml price (worked at ~1 g/ml) |
| Pack | Price | Per reed | Use |
|---|---|---|---|
| Pack of 25 | ₹265.00 | ₹10.60 | only if your product uses white reeds |
| Pack of 50 | ₹450.00 | ₹9.00 | same per reed from 50 up |
| Pack of 100 | ₹900.00 | ₹9.00 | — |
| Pack of 500 | ₹4,500.00 | ₹9.00 | — |
Skip: a second CSI base as a third arm (that's the which-carrier decision post's territory and it costs you clarity); the CSI HyperDiffusion Base™, which is out of stock on 7 October 2026; and the Isopropyl Alcohol Spray, which is a cleaner, not an ingredient. CSI sells fibre reeds only, not rattan, so if your product uses rattan, test with your own rattan in both arms.
CandleMakingSuppliesIndia sells ready-made reed diffuser bases, fibre reeds and bottles, not DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol. This page still tells you to keep your DPG formula if it wins, to start with the cheapest split test, and that no base, ours included, always outperforms another. Our base pages publish no composition, density, flash point or SDS in the text we captured.
Every CSI price was checked on 7 October 2026, with stock per variant: everything priced here is in stock on that date; the CSI HyperDiffusion Base™ is out of stock and not offered. Page wording is quoted and attributed.
The worked g/day figures and the two-thirds preference threshold are illustrative or suggested, not CSI test data; the decision rule is yours. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Made a Reed Diffuser Using 80 g DPG and 20 g Fragrance Oil, but the Reeds Are Wet and the Room Has Almost No Smell — Is DPG the Wrong Base for This Formula?
- I Used DPG as My Only Reed Diffuser Base, and the Liquid Level Has Barely Dropped After Two Weeks — Should I Switch to a More Volatile Carrier?
- My Jasmine Fragrance Oil Dissolves Completely in DPG, but the Finished Diffuser Has Weak Throw — Why Doesn’t Good Solubility Guarantee Good Diffusion?
- I Used 25% Lavender Fragrance Oil with 75% DPG, but Increasing the Fragrance Percentage Hasn’t Improved the Throw — What Should I Test Next?
- My DPG-Based Reed Diffuser Smells Strong Only When I Flip the Reeds — How Do I Determine Whether the Base or Reed Material Is Responsible?
- My DPG Reed Diffuser Has Almost No Weight Loss After Ten Days — How Do I Run a Controlled Evaporation Test to Compare Alternative Bases?
- I Am Buying a New Reed Diffuser Base Because DPG Isn’t Working — What Technical Specifications Should I Compare Before Ordering Samples?
- I Want to Stop Guessing with DPG Reed Diffuser Formulas — How Do I Compare Solubility, Wicking, Evaporation, Throw and Cost Before Choosing My Next Base?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Autumn, Blue Ocean Fragrance Oil, Citrus Lemon Fragrance Oil, Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Lavender Fragrance Oil, Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml). They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Sooraj R, snehal Chaudhary, Avanthi Cheeli, Yashvi Shah, Tina Raha, M A. Reviews below five stars are included as published, not filtered out.
Figures verified 7 October 2026, CSI live pricing: Gold Reed Diffuser Bottle Pack of 10, 50 ML ₹826.00 (₹82.60 each), 120 ML ₹1,062.00 (₹106.20 each); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed from 50 up); Fiber Diffuser Reeds (White) 25 ₹265.00 (₹10.60), 50 ₹450.00, 100 ₹900.00, 500 ₹4,500.00 (₹9.00 from 50 up); Pure Performance Reed Base Oil 100g ₹325.00, 500 ML ₹1,099.00 (₹2.20 a ml); Lift Base 500 ml ₹1,099.00; CSI HyperDiffusion Base™ ₹1,499.00 (out of stock). Every item priced is in stock on 7 October 2026 except where marked. Per unit = pack price ÷ units, two decimals. CSI does not list DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol.
Non-price figures: two 100 g batches, one DPG and one ready-made base, are the reader's (title). The 20 g oil + 80 g carrier, 30 g split fills with 3 reeds, 10 g retained sample, 300 g remake with 5 reeds, 30-day schedule, three panellists, 0–5 scale and two-thirds preference threshold are labelled worked examples or in-house suggestions. The g/day figures in the worked example and the diagram codes are illustrative, not CSI test data. The 40-bottle run assumes a density near 1.0 g/ml that you confirm by weighing. "Blend with 10-30% fragrance oil" and the 24–48 hour rest are base-page wording. Costs are materials only and exclude labour, freight, packaging and GST. Diwali 8 November 2026 and Christmas 25 December 2026 are calendar facts.