I Made a Reed Diffuser Using 80 g DPG and 20 g Fragrance Oil, but the Reeds Are Wet and the Room Has Almost No Smell — Is DPG the Wrong Base for This Formula?
Aktie
What is the test? Three arms, three bottles each, 100 g by weight per bottle. A is your formula as it is. B is the same 20 g of your oil in 80 g of CSI Pure Performance Reed Base. C is 20 g of a second oil in 80 g of DPG. Same 120 ml bottle, 6 fibre reeds and shelf; weigh every 2 days for 30 days for grams per day, and sniff coded bottles on fixed days.
What do the results mean? If B clearly beats A and C doesn't, the carrier is limiting: move off pure DPG. If C beats A and B doesn't, the oil is limiting: keep DPG and change the oil or its load. If both beat A, both play a part. If none differs beyond the bottle-to-bottle spread, look at the reeds, the room and the way you measure, not the formula.
What does it cost at CSI? Pure Performance 100g × 3 ₹975.00 + Fiber Reeds Black 50 + 25 ₹636.00 + Gold Bottle 120 ML × 10 ₹1,062.00 + Silicon Beaker 250 ML ₹600.00 + Lavender 50 g + 15 g ₹375.02 = ₹3,648.02. If you already own bottles and a beaker, it is ₹1,986.02. CSI does not sell DPG. Buy nothing in bulk until day 30.
- Straight answer: is DPG the wrong base?
- Why wet reeds can still mean a silent room
- The cause table: carrier, oil, reeds, bottle, room, nose
- The three-arm test, by weight, for 30 days
- Reading the result, and the decision
- What CSI sells for this, and what it doesn't
- Safety, plainly
- The test kit, priced, and the purchase step after a pass
- What to buy for the test, and what to skip
- Map of this cluster: 8301–8320
- Frequently asked questions
Why wet reeds can still mean a silent room
Your formula, restated exactly: 80 g DPG + 20 g fragrance oil, a 100 g batch at 20% by weight. The reeds are visibly wet and the room has almost no smell. Write down the oil and lot, bottle and fill, reed type and count, days since set-up, flips, room size, AC and season before you change anything.
A passive reed diffuser has to do three things. The fragrance must dissolve and stay dissolved; the liquid must wick up the reed, which needs it thin enough; and the carrier must be volatile enough to carry fragrance off the tips without emptying the bottle too fast. Wet reeds show the first two working. The silent room points at the third.
Where DPG fits. Dipropylene glycol is a common, low-odour solvent. Fragrances generally dissolve in it well, and it evaporates slowly. Those two habits are why DPG-heavy diffusers often last a long time and throw weakly: the liquid at the reed tip stays mostly DPG, and the fragrance in it is released gradually. A general tendency, not a law, and we won't put numbers on it: evaporation rates, viscosities and flash points belong on your supplier's SDS or TDS. For comparison, DPM (a glycol ether) is generally more volatile and thinner than DPG. IPM (isopropyl myristate) is an oily ester that tends to slow evaporation further. Ethanol speeds evaporation up and raises flammability. "Augeo-type" solvents are glycerol-ketal solvents marketed for diffusers. Augeo is another company's trademark (Solvay's), and CSI does not sell it.
Why "add more oil" usually isn't the fix. If the carrier limits release, 25 or 30 g of oil mostly makes a dearer slow liquid, and heavy components can make reeds sticky ( the 25% lavender post). The first question is whether the carrier or the oil limits release, and only a side-by-side test answers it. Good solubility doesn't settle it either: a perfectly clear blend can still diffuse poorly (why a clear jasmine blend can still throw weakly).
A real formula from a CSI customer
One of the 86 published reviews on CSI's pages describes this problem in a maker's own words (on Solar Bloom Fragrance Oil, unedited):
What the formula says. 80% of the liquid is DPG plus IPM, two slow, low-volatility carriers, and IPM is the oilier and slower of the two. The perfume oil is 10%, the bottom of the 10–30% range CSI's base pages give. The 10% perfume-grade ethanol evaporates far faster than the rest, so it is likely to leave early and take the brightest top notes with it, leaving a DPG/IPM-rich liquid on the reeds. Ethanol also raises the flammability of the whole blend. DPG (a glycol) and IPM (an oily ester) don't always mix cleanly at every ratio, so check the blend for haze or layering after a rest. One more fact from the data: the Solar Bloom page gives perfume uses ("Best as EDP at 18-22%") and states no reed-diffuser usage. It is a perfume-grade oil at ₹7.50 a gram at 50 g, 500 g and 1 kg (₹7.49 at 100 g).
What we would test, not what we would "fix" from a review. Arm A is his formula exactly. Arm B is the same oil at the same 10% in Pure Performance. Arm C is his formula with the 20% IPM replaced by DPG, which removes IPM and changes nothing else. Only then would we raise the oil from 10% in the winner, as its own step. Changing all four at once teaches nothing. The DPM, IPM and Augeo-type comparisons get their own cluster, starting at 8321.
The cause table: carrier, oil, reeds, bottle, room, nose
The rows are grouped, not ranked. "Evidence" means what makers commonly see, not CSI test data. The arms A–C are the test in the next section.
| Cause | Evidence you'd see | Discriminating check | Fix |
|---|---|---|---|
| Carrier · DPG (or DPG + IPM) too slow to release | Reeds wet, scent at the tips but not across the room; level drops slowly; greasy reeds with IPM | Arm B against A: same oil and load, different carrier | Change the carrier, or replace part of the DPG with a co-solvent, then run the same test (the barely-dropped post) |
| Oil · character | Heavy vanilla, resin, wood or gourmand oils; dark or thick oil; sticky reed tips | Arm C: a second, lighter oil in the same DPG | Choose the oil per carrier (the sticky coffee post, the thick vanilla post) |
| Oil · load | Too low, or so high that reeds clog; little difference between 20% and 25% | A load ladder inside 10–30%, after the carrier question is settled | The lowest load that passes your rule |
| Reeds · fibre count and length | Too few reeds for the room, or reeds barely above the neck | Same liquid, 6 against 8 reeds, as a later test | Reed count to suit the room (the reed page suggests 6–8 for 50–100 ml) |
| Reeds · saturation, clogging, flipping | Strong for a day after each flip, then nothing; tips dark and tacky | Fresh reeds into one bottle per arm mid-test; flip all arms alike or not at all | Fresh reeds, or a lighter oil or carrier (the flip-only post) |
| Reeds · rattan rather than fibre | Natural reeds that wick unevenly | Same liquid, rattan against fibre (rattan vs fibre first) | Change the reed before the formula |
| Bottle · neck and fill | Reeds jammed in a narrow neck; low fill, little reed in the liquid | Same liquid in the same bottle and fill in every arm | A neck the reeds sit loosely in; a fill you can repeat |
| Room · volume, airflow, season | Fine in a small bathroom, weak in a bedroom, near AC or in cool weather | One coded bottle per arm in the same closed room; log temperature and humidity | Match the product to the room (the bathroom-vs-bedroom post) |
| Nose · fatigue and adaptation | "Smells of nothing" to the maker, visitors notice it | Sniff on entering from outside, coded bottles, two or three people | Blind panel on fixed days, never your own all-day nose |
| Measurement · judging too early | Verdict on day 2; weights on different scales | Weights on one scale, every 2 days, for 30 days | Decide on the full run |
| Process · not rested, mixing errors | Tested straight after mixing; batches by volume, not weight | Rest 24–48 hours (the base pages' wording) before day 0 | Weigh, rest, then fill |
Two arms discriminate: B changes the carrier, C changes the oil. Everything else is a control held identical in all nine bottles, or a later test.
The three-arm test, by weight, for 30 days
| Arm | Carrier | Oil | Per bottle | What it isolates |
|---|---|---|---|---|
| A · control | Your DPG | Your oil | 80 g + 20 g | Your current result, measured, not remembered |
| B · carrier | Pure Performance Reed Base | Your oil | 80 g + 20 g | Whether a different carrier releases the same oil better |
| C · oil | Your DPG | A second oil from another family | 80 g + 20 g | Whether the oil, not the carrier, is limiting |
| D · optional | 60 g DPG + 20 g of a co-solvent you already hold (e.g. DPM), after reading its SDS | Your oil | 80 g + 20 g | Whether a partial DPG swap does what a full base swap does |
Material for the core test: 120 g of your current oil (arms A and B), 60 g of a second oil (arm C), 480 g of your DPG (arms A and C) and 240 g of Pure Performance (arm B). Mix fresh A batches the same day as B and C, not the bottle already on your shelf. The full controlled-evaporation method (taring, data sheets and open-bottle carrier-only controls) is its own post. Here is the short version:
Why 30 days, the top of the 14–30-day range: a volatile-rich arm can look strong in week one and fade, and a slow arm can creep up. Day 14 is a progress report; day 30 decides.
Reading the result, and the decision
| Pattern | B · carrier swap | C · oil swap | What it means | Decision |
|---|---|---|---|---|
| 1 | Beats A | ≈ A | DPG limits release for your oil | Move off pure DPG: take B to a pilot, or run arm D against B to see if a partial swap is enough |
| 2 | ≈ A | Beats A | Your oil limits release, not DPG | Keep DPG; change the oil, or test its load inside 10–30% |
| 3 | Beats A | Beats A | Both play a part | Next run: the second oil in the base, against B |
| 4 | Loses weight faster, sniffs no better | Any | Faster emptying, not stronger throw | Check life against your target; a faster carrier alone isn't the answer |
| 5 | ≈ A, all weak | ≈ A, all weak | Not the formula: reeds, room, sniff method | Fresh-reed swap result, room size (8307), blind panel |
| 6 | Strong only after flips or reed swaps | Same | Reed saturation or clogging | Reed tests before carrier tests (8313) |
| 7 | Differences inside the spread | No conclusion yet | Tighten the method or add bottles; don't decide on noise | |
If pattern 1 is yours, the next question is which non-DPG route: a ready-made base, or your own blend with DPM or an Augeo-type solvent (the decision matrix for replacing part of the DPG). To compare two finished batches properly, with a scoring sheet, see the fair DPG-vs-base protocol. If you're about to order a new base from anyone, ask for the specifications in the pre-sample checklist first. For the wider grid, including bottle geometry, see CSI's live guide on fixing a weak reed diffuser by comparing base, load, reeds, bottle and environment.
What CSI sells for this, and what it doesn't
| Base | Size and price | Per ml | What the page says it is for |
|---|---|---|---|
| Pure Performance Reed Base Oil | 100g ₹325.00 · 500 ML ₹1,099.00 | ₹2.20 (500 ML) | "smooth even wicking", "No added fixatives"; the only reed base in a 100 g size, so the test arm |
| Lift Base | 500 ml ₹1,099.00 | ₹2.20 | "floral, citrus, green, and fruity"; "bloom, diffuse further" |
| Softness Base | 500 ml ₹1,099.00 | ₹2.20 | "soft florals, powdery musks, and light gourmand" |
| Depth Base | 500 ml ₹1,099.00 | ₹2.20 | "chypre, leather, smoky, and rich gourmand"; "Slows evaporation" |
| Longevity Base | 500 ml ₹1,296.00 | ₹2.59 | "oriental, woody, resinous, and balsamic"; "long-lasting cold scent diffusion" |
| CSI HyperDiffusion Base | ₹1,499.00 | — | Out of stock on 7 October 2026; not offered here |
Pure Performance is arm B because it is the only reed base sold in 100 g (the Professional Attar Base's 100g is not a reed base) and its page says "No added fixatives", a neutral question about the carrier. Lift's page positions it for florals; Depth's says "Slows evaporation", the opposite of what a silent DPG diffuser needs. A family-matched arm costs ₹1,099.00 or more, and per-gram cost needs a density the pages don't give: weigh 100 ml of any base you buy. Not reed bases: Room & Linen Spray Base (₹999.00), Perfume Base (₹1,099.00) and the CSI Ultrasonic Diffusion Concentrate Base (₹1,649.00).
Safety, plainly
Flammability. Fragrance oils and many diffuser solvents are flammable, and adding ethanol or another volatile co-solvent generally makes a blend more so. Mix away from flames, gas hobs and heaters. Never place a diffuser near a candle, diya, incense or heater, and say so on the label. Read the SDS for every ingredient before you mix: your DPG, any co-solvent and the fragrance oil (CSI's oil MSDS and IFRA documents are on request on WhatsApp). Skin and eyes. Wear gloves and eye protection when mixing and flipping. Neat oil and solvents can irritate: wash skin with soap and water, rinse eyes with plenty of water, and get medical advice if irritation continues. Children and pets. Keep diffusers out of reach. A bottle knocked over by a child, cat or dog spills liquid that shouldn't be swallowed or licked; if it is, get medical advice and have the label to hand. Furniture. Diffuser liquid can mark or soften varnished, painted, polished and plastic surfaces. Use a tray or coaster, flip reeds over a sink, and wipe drips at once. Labelling. Hazard labelling for a finished diffuser depends on the full formula and your market's rules (CLP/GHS-style systems classify the mixture, not just one ingredient). Get qualified advice; this page is not legal advice. At the least, carry the contents, batch, your contact details, "keep out of reach of children and pets" and "keep away from flames".
The test kit, priced, and the purchase step after a pass
| Item | Need | Buy | ₹ |
|---|---|---|---|
| Arm B carrier | 240 g | Pure Performance 100g × 3 (60 g spare) | ₹975.00 |
| Reeds, all arms + mid-test swap | 72 | Fiber Reeds Black 50 + 25 (3 spare) | ₹636.00 |
| Bottles | 9 | Gold Reed Diffuser Bottle 120 ML, pack of 10 | ₹1,062.00 |
| Mixing | 1 | Silicon Measuring Beaker 250 ML | ₹600.00 |
| Arm C oil | 60 g | Lavender 50 g + 15 g (or Jasmine 50 g + 15 g, ₹333.00) | ₹375.02 |
| Kit total | Everything above | ₹3,648.02 | |
| If you own bottles and a beaker | Base, reeds and arm C oil | ₹1,986.02 | |
| With optional arm D | 96 reeds, 12 bottles | Reeds 100-pack, 2 bottle packs, rest as above | ₹4,874.02 |
Argued against our own interest, twice. Start with three 100g samples (₹975.00), not five 500 ml bases. And don't buy reeds by the 500 to "save": 50, 100 and 500 packs are all ₹8.00 a reed; the only saving is a 50 + 25 (₹636.00) over three 25s (₹708.00). For arm C's oil, 50 g + 15 g beats the 100 g pack on both oils (₹164.98 cheaper on Lavender, ₹97.00 on Jasmine). One arm-B bottle holds 80 g of base, about ₹260.00 at the sample price, plus your oil.
The purchase step after a pass
Pilot first. If B passed (pattern 1), make a pilot of about ten bottles from the base size you'd actually use. Keep two as retained samples and watch clarity at room temperature and somewhere warmer (in-house check) for 2–4 weeks before selling. Then the run, as a worked example: 50 bottles of 100 g at 20% needs 4,000 g of base and 1,000 g of oil. At a worked density of 1.0 g/ml (weigh your own: the page gives none), that is 8 × Pure Performance 500 ML = ₹8,792.00. The same grams as 100 g samples would cost ₹13,000.00, so the sample size is for testing only. Reeds: 300 at 6 a bottle is 3 × 100 (₹2,400.00); the 500-pack (₹4,000.00) adds nothing per reed. Bottles: 5 packs of 120 ML (₹5,310.00). Oil, Jasmine as the example: 2 × 500 g (₹3,922.00) is ₹1.00 cheaper than the 1 kg (₹3,923.00). With 2 × 500 g, the run totals ₹20,424.00, or ₹408.48 a bottle in materials, excluding labour, freight, packaging and GST. Bigger quantities ("should I buy 1, 5 or 25 kg?") are covered in CSI's live guide on buying 1 kg, 5 kg or 25 kg of reed diffuser base. CSI lists no 25 kg base, so ask on WhatsApp. If pattern 2 was yours, your DPG stays and your spend with us may be one oil. That's fine.
What to buy for the test, and what to skip
Chosen on page statements, price and stock on 7 October 2026, not on performance: CSI publishes no diffusion data. Each card says when not to buy.
| Size | Price | Per unit | For this test |
|---|---|---|---|
| 100g | ₹325.00 | ₹3.25 a gram | arm B: 3 of them (₹975.00), 60 g spare |
| 500 ML | ₹1,099.00 | ₹2.20 a ml | after a pass, or if you are already sure you will scale |
| Pack | Price | Per reed | Use |
|---|---|---|---|
| Pack of 25 | ₹236.00 | ₹9.44 | with a 50: the test (75 reeds) |
| Pack of 50 | ₹400.00 | ₹8.00 | with a 25: the test |
| Pack of 100 | ₹800.00 | ₹8.00 | production, or a test with arm D |
| Pack of 500 | ₹4,000.00 | ₹8.00 | same per reed as 50: no saving |
| Pack | Price | Per bottle | Use |
|---|---|---|---|
| 120 ML Pack of 10 | ₹1,062.00 | ₹106.20 | the test: 9 bottles + 1 spare |
| 50 ML Pack of 10 | ₹826.00 | ₹82.60 | not for this test: a different fill and reed depth |
| Listing | Price | For this test |
|---|---|---|
| Silicon Measuring Beaker 250 ML | ₹600.00 | one 100 g batch, room to stir |
| Silicon Measuring Beaker 100 ML | ₹300.00 | too tight for 100 g |
| Size | Price | Per gram | Use |
|---|---|---|---|
| 15 gm | ₹105.02 | ₹7.00 a gram | a smell check only |
| 50 gm | ₹270.00 | ₹5.40 a gram | with a 15 g: arm C (₹375.02) |
| 100 gm | ₹540.00 | ₹5.40 a gram | same per gram as the 50 g |
| 500 gm | ₹2,620.00 | ₹5.24 a gram | a run after a pass |
| 1 kg | ₹5,221.00 | ₹5.22 a gram | cheaper than 2 × 500 g |
| Size | Price | Per gram | Use |
|---|---|---|---|
| 15 gm | ₹103.00 | ₹6.87 a gram | a smell check only |
| 50 gm | ₹230.00 | ₹4.60 a gram | with a 15 g: arm C (₹333.00) |
| 100 gm | ₹430.00 | ₹4.30 a gram | ₹97.00 dearer than 50 + 15 g for arm C |
| 500 gm | ₹1,961.00 | ₹3.92 a gram | a run after a pass |
| 1 kg | ₹3,923.00 | ₹3.92 a gram | costs ₹1.00 more than 2 × 500 g |
Skip for now: any 500 ml base before day 30; a second family-matched base in the first round; 500-packs of reeds; 1 kg of any oil before a pass; Isopropyl Alcohol Spray as an ingredient; and the HyperDiffusion Base, which is out of stock on 7 October 2026. A full 30-day measurement method that adds reed condition and room temperature is in CSI's live guide on testing reed diffuser performance over 30 days. If your blend turns cloudy on mixing, that is a compatibility question first: see the cloudy-mixing guide.
Map of this cluster: 8301–8320
This hub owns the short answer, the three-arm test and the priced kit. Each sibling takes one version of "my DPG reed diffuser isn't working" further.
Next in this series: comparing DPM, IPM and Augeo-type solvents head to head starts at 8321; home-made solvent blends that keep failing at 8341; mixing, resting, filling and testing failures at 8361; and buying the right materials and scaling at 8381.
CandleMakingSuppliesIndia sells the reed bases, fibre reeds, bottles, beakers and oils named here, and does not sell DPG, DPM, IPM, Augeo-type solvents or perfumer's alcohol. This page still tells you that our base pages publish no composition, density, flash point or SDS, that a base is a comparison arm and not a promise, and that if your DPG formula wins your own test you should keep it.
Every CSI price was checked on the live store on 7 October 2026, with stock checked per size. The HyperDiffusion Base is out of stock and is not offered; every item priced in the kit is in stock on that date. Page wording is quoted and attributed. The review quoted is a real, unedited Judge.me review.
Solvent behaviour is described as general tendencies, with no flash points, viscosities or evaporation rates. The diagram is illustrative. The test method, sniff scale and pass rule are in-house methods for you to adopt or change, and the density and run figures are labelled worked examples. For bulk pricing, GST invoicing, and MSDS and IFRA documentation for our fragrance oils on request, message us on WhatsApp at +91 7397976926.
Frequently asked questions
- I Used DPG as My Only Reed Diffuser Base, and the Liquid Level Has Barely Dropped After Two Weeks — Should I Switch to a More Volatile Carrier?
- I Made Two 100 g Reed Diffuser Batches, One with DPG and One with a Ready-Made Base — How Do I Compare Their Actual Diffusion Performance?
- I Want to Replace Part of the DPG in My Reed Diffuser Formula — Should I Test DPM, an Augeo-Type Solvent or a Commercial Ready-Made Base?
- My DPG Reed Diffuser Has Almost No Weight Loss After Ten Days — How Do I Run a Controlled Evaporation Test to Compare Alternative Bases?
- I Am Buying a New Reed Diffuser Base Because DPG Isn’t Working — What Technical Specifications Should I Compare Before Ordering Samples?
- I Want to Stop Guessing with DPG Reed Diffuser Formulas — How Do I Compare Solubility, Wicking, Evaporation, Throw and Cost Before Choosing My Next Base?
Customer reviews: The six reviews at the top of this page are genuine, published Judge.me reviews left by CSI customers on the product pages named on each card — Gold Reed Diffuser Bottle Pack of 10 (50 ML and 120 ML), Jasmine Fragrance Oil, Lavender Fragrance Oil, Lift Base – Professional Grade Reed & Car Diffuser Base (500 ml), Solar Bloom Fragrance Oil. They are general product reviews, not assessments of the reed-diffuser formulation advice on this page. Names, star ratings, dates and products are as recorded by Judge.me and wording is unedited. "Verified buyer" appears only on reviews Judge.me recorded as verified — Pradeep Kumar Dahiya, Sooraj R, snehal Chaudhary, Tina Raha, Priyanka Purohit. The reviews from S.A. are published but not recorded as verified, and carry no badge. Reviews below five stars are included as published, not filtered out.
Figures verified 7 October 2026, CSI live pricing: Pure Performance Reed Base Oil 100g ₹325.00 (₹3.25 a gram), 500 ML ₹1,099.00 (₹2.20 a ml); Lift Base, Depth Base and Softness Base 500 ml ₹1,099.00 each (₹2.20 a ml); Longevity Base 500 ml ₹1,296.00 (₹2.59 a ml); CSI HyperDiffusion Base ₹1,499.00 (out of stock); Fiber Diffuser Reeds (Black) 25 ₹236.00 (₹9.44 a reed), 50 ₹400.00, 100 ₹800.00, 500 ₹4,000.00 (₹8.00 a reed); Fiber Diffuser Reeds (White) 25 ₹265.00 (₹10.60), 50 ₹450.00, 100 ₹900.00, 500 ₹4,500.00 (₹9.00); Gold Reed Diffuser Bottle Pack of 10, 50 ML ₹826.00 (₹82.60 each), 120 ML ₹1,062.00 (₹106.20 each); Silicon Measuring Beaker 100 ML ₹300.00, 250 ML ₹600.00; Candle Making Weighing Scale ₹354.00; Isopropyl Alcohol Spray 150 ML ₹383.00, 1 Litre ₹520.00; Room & Linen Spray Base ₹999.00; Perfume Base ₹1,099.00; CSI Ultrasonic Diffusion Concentrate Base ₹1,649.00; Lavender Fragrance Oil 15 gm ₹105.02, 50 gm ₹270.00, 100 gm ₹540.00 (₹5.40 a gram), 500 gm ₹2,620.00, 1 kg ₹5,221.00; Jasmine Fragrance Oil 15 gm ₹103.00, 50 gm ₹230.00, 100 gm ₹430.00, 500 gm ₹1,961.00, 1 kg ₹3,923.00 (₹3.92 a gram at 500 g and 1 kg); Solar Bloom Fragrance Oil 50g ₹375.00 (₹7.50 a gram), 100g ₹749.00 (₹7.49), 500g ₹3,749.00, 1kg ₹7,499.00 (₹7.50). Every item priced here is in stock on 7 October 2026 except the HyperDiffusion Base. Per unit = pack price ÷ units, two decimals; per ml = price ÷ 500 because the base pages state no density. Kit totals and run costs exclude labour, freight, packaging and GST.
Non-price figures: "80 g DPG + 20 g fragrance oil", "reeds are wet" and "almost no smell" are the reader's words (title); 20% is that formula by weight. The 100 g bottle fill, 6 reeds, 3 bottles per arm, 30 days and 2-day weigh-ins are the series defaults, labelled. The 30 cm spacing, sniff days, 0–5 scale, 1 m distance and pass rule are in-house methods. The 60-day life target (1.67 g a day) and the density of 1.0 g/ml are worked examples. "10-30%", "24-48 hours", "6-8 reeds" and every quoted line are CSI page wording. Review 85 is quoted unedited. No flash point, viscosity, density or evaporation figure is given for any material; the diagram has no scale. Diwali, 8 November 2026, is a calendar fact.