I want to buy a ready-made reed diffuser base from CSI — how do I compare its compatibility with my existing fragrance oils against my current base?
Aktie
- What the two live pages own, and what this one does
- Your current base is the most valuable thing here
- One denominator, both sides
- Designing a symmetric head-to-head
- What CSI's side brings: four published things, quoted
- What CSI does not publish either
- Reading the pairs: what each pattern licenses
- The trial pack, and why it is dearer per gram
- What the head-to-head costs against a production run
- Buying in sequence, and what not to buy yet
- Frequently asked questions
What the two live pages own, and what this one does
Two live CSI pages already answer the general version of your question. This page answers the specific one: how to build the comparison.
If your question is how to qualify a new base supplier in the ordinary way — what to ask for, how much to order, how to protect continuity of supply on a product you already sell — that is owned by a live page: how to test a new reed diffuser base supplier before replacing the base used in your existing bestselling products. And if your question is whether to buy base and fragrance oil from the same place to keep compatibility simple, that has its own live page too: buying base and fragrance oil from one supplier. Both are worth reading alongside this page; neither is re-answered here.
What this page owns is narrower and more practical: the design of the comparison itself. Not whether to switch, not how much to buy, not which supplier to trust — how to set up an experiment in which the only thing that differs between two sets of arms is the base, so that whatever you see at the end of it means something. That is a question of arithmetic, symmetry and bookkeeping, and it is the part makers most often get wrong.
It is also the one page in this cluster where CSI is one of the two things being compared, which puts an obligation on it. A comparison written by one of the parties is worth nothing unless it is scrupulously even-handed, so this page gives the CSI base no advantage except what its own product pages actually publish, and gives your current base full credit for the thing it genuinely has: a record of working in a product your customers have paid for. If the test comes out in favour of what you already use, that is a perfectly good outcome and it has saved you a switch.
One honest note on what a comparison like this can settle. It can tell you how two liquids behave with your oils at your load, in your workshop, over the weeks you watch them. It cannot tell you why, because the chemistry of neither base is published anywhere — and it cannot tell you about a lot you have not tested. A base that behaves well in one 500 ml pack is evidence about that pack; the habit that turns it into evidence about a supplier is keeping a retain from every pack and repeating a short arm when a new lot arrives.
| The question | Who owns it | What it needs |
|---|---|---|
| How do I qualify a new base supplier in general? | The live CSI supplier-testing page | A general protocol and a list of what to ask for |
| Should base and oil come from the same supplier? | The live CSI same-supplier page | A procurement decision about simplicity against choice |
| How do I design a fair head-to-head with my own oils? | This page | Eight symmetric arms, two control arms, one denominator and a notebook |
| Why is my current blend cloudy at all? | The live CSI compatibility page | A diagnosis of the formula you already have |
| How much base should I then buy? | The live CSI bulk-quantity page | A quantity decision, after the comparison |
Your current base is the most valuable thing here
You are not starting from nothing. You are holding the only instrument in the room with a service history.
Start by giving your existing base its due, because the temptation in a comparison like this is to treat the incumbent as the problem and the candidate as the solution. The base you use now has something no new base can have: it has been in a product that customers bought, opened, used and did not complain about. You know how it behaves with your oils, at your load, in your bottles, in your climate, over whatever period you have been selling. That is a body of evidence worth more than any specification sheet.
It has a second advantage that matters to the arithmetic: the stock is already paid for. Every arm on your side of this experiment costs you material you own, which means the whole cost of the comparison falls on the CSI side and on any oil you have to buy in a small pack. So the honest framing is not “what will it cost me to test CSI's base against mine” but “what will it cost me to test CSI's base at all”, and the answer is one pack.
Which is exactly why your base is the reference arm and not the challenger. The structure of the test is: here is a known thing, here is an unknown thing, do they differ with my oils at my load. A result in which the CSI base matches your current base is informative — it means you have a second source, which is worth having for continuity whether or not you switch. A result in which it is worse is informative and cheap. A result in which it is better is the only one that justifies a change, and it should have to be visible, not marginal.
Before you weigh anything, write down what you already know about your current base, because half of it will otherwise be reconstructed from memory halfway through the test. Which oils you have run in it. At what load. What the worst behaviour you have seen was, and with which oil. Whether a lot ever behaved differently from the one before. What its supplier publishes — a load figure, a solvent identity, a shelf life, a safety data sheet, anything. And whether you have a retain of the pack you are currently selling from. That last one is the difference between a comparison and an anecdote.
One denominator, both sides
A load means nothing until you say what it is a percentage of — and the two bases have to be at the same one.
CSI's reed and car diffuser base pages give fragrance load as a percentage of the total finished blend. The published figures are 10% as a starting point, 20% as the recommended working load and 30% as the maximum, with 75% base plus 25% fragrance oil given as the typical working blend and a worked example that reads: for a 100 ml finished diffuser at 25% fragrance, use 75 ml of base and 25 ml of fragrance oil. So a 100 g bottle at the typical blend is 25 g of oil and 75 g of base; at the recommended load, 20 g and 80 g; at the published start, 10 g and 90 g; at the published maximum, 30 g and 70 g.
The candle convention is the opposite — there, load is a percentage of the wax weight — and most Indian diffuser makers came to diffusers from candles. So the commonest recording error in the trade is to divide the oil by the base: 25 g into 75 g reads as 33.33% against the base and 25% against the total finished blend, and at the recommended load the same slip turns 20% into 25%. Both numbers are arithmetically correct. Only the first of each pair can be compared with 10%, 20% and 30%.
In a head-to-head this stops being a bookkeeping nicety and becomes the whole validity of the test. If your own records are kept against the base weight and you weigh the CSI arms against the total blend, the two sides are at different loads and every difference you observe is your arithmetic rather than the base. Convert your existing records first, write both figures down once so the conversion is visible, and then weigh both sides to the same number.
Record grams, not percentages, and let the percentage be derived. Oil weight, base weight, total weight, which base, which oil, which lot of each, the vessel, the room temperature, the mixing order, the rest time, and the reading at each sitting. A percentage without its grams cannot be audited in a month; grams can be re-divided any way you like. And give the two sides the same row structure in the same notebook — eight rows, not two notebooks — because a comparison kept in two places is a comparison nobody will do.
| Load, as a percentage of the total finished blend | Fragrance oil | Base | What the pages say about it |
|---|---|---|---|
| 10% | 10 g | 90 g | Published starting point for a new oil |
| 20% | 20 g | 80 g | Published recommended working load — the usual place to run a head-to-head |
| 25% | 25 g | 75 g | The typical working blend published on the pages: 75% base, 25% oil |
| 30% | 30 g | 70 g | Published maximum, with a test-thoroughly caution on every page |
Designing a symmetric head-to-head
Same oils, same load, same bottles, same jug, same minute. Every asymmetry you allow becomes part of the answer.
Eight arms of 25 g, four a side. On each side: oil one at your working load, oil two at your working load, oil three at your working load, and one arm of that base with no fragrance oil at all. At the published recommended load each loaded arm is 5 g of oil with 20 g of base, and each control arm is 25 g of neat base — ₹81.25 at the trial pack rate on the CSI side, or ₹54.95 at the 500 ml rate. The CSI side therefore needs 85 g of base, against the 100 g in one 100 g trial pack, leaving 15 g.
The oil comes out of one decant per oil, not two. Weigh 10 g of each oil into a small clean vessel at the start, and draw both that oil's arms from the same decant within the same few minutes — that is 30 g of oil across the three oils and both sides. If you draw oil one's two arms from the bottle on two different days, you have introduced a variable you cannot see. The same goes for the base on your own side: both the loaded arms and the control come from the same jug, at the same temperature, in the same session.
Then the list of things to hold still, which is longer than makers expect and is the actual content of this page. The same scale, zeroed between every weighing. Vessels of the same size and shape, clean and dry, from the same batch of glass. Oil added to base rather than base to oil, at the same pouring speed. The same number of stirring turns with a clean tool between arms. The same room, the same bench, the same half-hour, and a note of the temperature. The same rest, which is the published 24-48 hours. And one reading sitting at the end of the rest in which all eight arms are looked at together, in the same light, from the same distance.
Scale matters to what fits in the pack, so decide the number of oils before you order. Three oils a side is 85 g of base and fits one 100 g trial pack with 15 g spare. Five oils a side is 125 g of base, which a single 100 g trial pack does not cover — it is 25 g short. Two trial packs at ₹650.00 hold 200 g and leave 75 g, and a 500 ml pack at ₹1,099.00 covers it with room for the bottled stage as well. Pick the number of oils you can afford to read carefully rather than the number you own: eight arms read properly beats sixteen read in a hurry.
What CSI's side brings: four published things, quoted
The CSI base gets exactly one advantage in this test, and it is not a chemical one. It is that four things are written down.
One, a recommended load band. Every reed and car diffuser base page publishes 10% as a starting point, 20% as the recommendation and 30% as the maximum, as a percentage of the total finished blend, with 75% base plus 25% fragrance oil given as the typical working blend. The Longevity page publishes a slightly higher band of its own: “The recommended working ratio is 70-75% Longevity Base with 25-30% fragrance oil.” That gives you a rung to test at that is not one you invented, and a figure a supplier can be held to.
Two, a published maximum with a caution attached to it. The wording differs page by page and is worth quoting from the base you are actually testing: Pure Performance and Depth both say “Test thoroughly before batch production at this level.”, Lift says “Test thoroughly - some oils may cloud at maximum load.”, Softness says “Test thoroughly - some oils may behave differently at maximum load.” and Longevity says “For rich ouds and deep resins in large or commercial spaces. Test thoroughly before batch production.” A published ceiling with a caution on it is more useful than a published ceiling without one, because it tells you where the supplier expects variability to start.
Three, a clarity step-down instruction. Four of the five base pages carry one in their own how-to-use steps, and the wording is the clearest published statement anywhere in the range that compatibility is a property of a pair at a load rather than of a base: Lift says “If clouding occurs, the fragrance oil may not be fully compatible at that load - reduce fragrance percentage and retest.”, Softness says “If clouding occurs, the fragrance oil may not be fully compatible at that load - reduce the fragrance percentage and retest.”, Depth says “If any clouding occurs, reduce fragrance percentage and retest before proceeding to batch production.” and Longevity says “The blend should remain crystal clear. If clouding occurs, reduce fragrance percentage and retest. Heavy oils like oud can cloud at maximum load in some bases.” That is a published protocol for the case your test might produce, and it is CSI's own advice rather than this page's suggestion.
Four, a stated performance intention per base, by fragrance family. The pages name families: Longevity names oriental, amber, woody, resinous, balsamic, spicy and gourmand, and steers the other way too — “Light Florals, Fresh Citrus, Aquatics - use Lift Base instead for brightness and airiness.”; Lift names floral, citrus, green, fruity and aquatic; Depth names complex, layered, gourmand, sweet and spicy; Softness is published for gentle, comforting scents; Pure Performance is positioned as the neutral one, its specification line reading “Fixatives: None - clean base, no additives.” The step from your oil to a family is yours and CSI's editorial judgement, not something printed on an oil's page — this page treats British Rose as a floral, Roasted Coffee as a gourmand and Woody Oud as a resinous, and the pages name all three of those families.
| Published | Where | What it is worth to your test |
|---|---|---|
| 10% start, 20% recommended, 30% maximum, as a percentage of the total finished blend | Every base page | A rung you did not invent, shared by both sides |
| 75% base plus 25% fragrance oil as the typical working blend, with a worked 100 ml example | Every base page | An unambiguous denominator |
| A higher working band of 70-75% base with 25-30% oil | The Longevity page | A second published rung if your product sits high |
| A caution at the top of the range, worded per page | All five base pages | Tells you where the supplier expects variability |
| Reduce the fragrance percentage and retest if clouding occurs | Lift, Softness, Depth and Longevity | A published protocol for the outcome your test may produce |
| A performance intention per base, named by fragrance family | Each base page | Narrows five candidates to one or two before you spend |
| A rest of 24-48 hours before bottling | The Longevity page | The only published duration in the process; sets the reading schedule |
| One stability sentence, scoped to sweet, spicy and gourmand oils | The Depth page | The single published claim that one base holds what another may not |
The one published sentence that goes further than the family map is the Depth page's, and it is quoted whole because it is the only one of its kind in the range: “Sweet, spicy, and gourmand fragrance oils that separate or behave inconsistently in a neutral base perform stably and predictably in the Depth Base.” That is scoped to the sweet, spicy and gourmand families the page itself names, and it makes Depth the published candidate for a gourmand such as the coffee in this page's worked set — with a 25 g arm as the way you confirm it for your own oil at your own load. It does not reach a family the page does not name, so it has nothing to say about the rose or the oud.
Now the even-handed half of that argument. Your current base may publish all four of these things too, or more, or none. If its supplier publishes a load band, a solvent identity, a shelf life and a safety data sheet, that is a real advantage to your incumbent and it belongs in the comparison table you build. The point is not that CSI publishes and others do not — it is that published numbers are the only legitimate asymmetry in this test, and you should list both sides' published claims side by side before you weigh a single gram, then judge everything else on the eight arms.
What CSI does not publish either
If you are hoping a document will settle this, no document exists on either side.
Be clear about the shape of the ground. CSI publishes no solvent identity, no safety data sheet, no flash point, no solubility table and no shelf life for any base in the reed and car diffuser range, and no lot number, certificate of analysis or compatibility data for any fragrance oil. So there is no document anywhere in the catalogue that answers “will this base hold my oil” — which is exactly why a 100 g trial pack exists, and exactly why this page is a protocol rather than a comparison of specifications.
That matters to how you read the previous section. The four published things are real and useful, and they are all statements of intent and instruction rather than disclosures of composition. A load band tells you where the supplier expects the material to work. A family list tells you what it was built for. A step-down instruction tells you what to do when it does not. None of them tells you what is in the bottle, and none of them can be substituted for a reading you take yourself.
So the comparison is, honestly stated, two liquids judged on your own readings, plus whatever each supplier chooses to print. That is less than a maker would like and more than it sounds, because a reading taken on eight symmetric arms is a real measurement of the thing you actually sell. It is also why the arms are symmetric: when neither side's chemistry is disclosed, the design of the experiment is the only source of validity you have.
What you can do is ask, of both suppliers, in writing, and keep the answers. A lot or batch identifier on the pack. A retained sample policy. The fill weight. Whatever safety documentation is held. Whether the formula has changed since your last order. None of that is published on a CSI page, and asking for it is how a small manufacturer builds the change control that a published specification would otherwise provide. If one supplier answers and the other does not, that is a genuine difference between them, and it belongs in your table next to your eight readings.
| What you might want | Published in the CSI range? | How this page handles it |
|---|---|---|
| A load band and a typical working blend | Yes, on every base page | Quoted, and used as the shared rung |
| A clarity instruction when a blend clouds | Yes, on four of the five base pages | Quoted, and used as the protocol if a pair clouds |
| A rest before bottling | Yes — 24-48 hours, on the Longevity page | Used as the reading schedule's decision point |
| A performance intention per base by family | Yes, on each base page | Used to pick which base to put in the test |
| Solvent identity or composition | No | Nothing is inferred; the arms are the evidence |
| A safety data sheet or a flash point | No | Ask the supplier, in writing, and keep the answer |
| A shelf life for a base | No | Keep a dated retain from every pack; that is your ageing record |
| A compatibility table for oil against base | No | The eight arms on this page are the substitute |
| A lot number on the pack | No | Ask; a lot identifier turns a shelf of retains into a dated series |
Reading the pairs: what each pattern licenses
The result is not a winner. It is a pattern across six pairs and two control arms, and each pattern licenses a different next move.
Read each oil as a pair, then read the pairs together. Oil one in your base against oil one in the CSI base, at the same load, at the same reading. If both are clear, that oil is indifferent to the base and tells you nothing about the switch — which is itself worth knowing, because it means the decision will be made by the other oils. If one is clear and the other is not, you have a difference, and the control arms tell you whether to believe it.
The control arms carry more weight than makers expect. A base that is not perfectly clear on its own cannot be judged on a loaded arm, and a faint haze in the neat base will otherwise be attributed to whichever oil was in the vessel. So read each side's control first, and if either one shows anything other than clear, stop and sort out the base, the vessel or the glass before you read a loaded arm. Two clear controls are what licence the six loaded readings.
The commonest real outcome is a split: one base holds two of your oils better and the other holds the third better. That is not a failure of the test — it is the family map showing up in your own workshop, and it is the result that most often changes a maker's product plan rather than their supplier. A split tells you to consider running two bases for two families, which is a range-level decision owned by a live page: one compatible base in bulk, or different bases for different fragrance families.
And if a pair clouds on the CSI side, the published instruction is to step the load down and look again rather than to abandon the base — Lift's wording is “If clouding occurs, the fragrance oil may not be fully compatible at that load - reduce fragrance percentage and retest.” So add one arm at the published recommended 20% if you were testing higher, or at the published starting 10% — 2.5 g of oil with 22.5 g of base — and keep the control arms on the bench. Do the same on your own side if it clouds there, because a step-down that is only applied to one side is another asymmetry.
| Your base | The CSI base | What it means | What it licenses |
|---|---|---|---|
| Clear | Clear | That oil does not discriminate between the two bases at your load | Decide on the other oils; a dead heat still gives you a second source |
| Clear | Trace or obvious | The candidate is worse for that oil at that load | Step the candidate's load down and re-read before concluding anything |
| Trace or obvious | Clear | The candidate is better for that oil at that load | Repeat that one pair, then consider the switch for that oil |
| Trace or obvious | Trace or obvious | The pair at that load is the problem, not either base | Step both sides down, or read the live compatibility page |
| Mixed across oils | Mixed across oils | A split result, by fragrance family | A range decision — one base or several |
| Control not clear | — | Your base or your vessel, not the oil | Fresh glass, fresh control, read again before judging any loaded arm |
| — | Control not clear | The candidate pack or your vessel | Fresh glass, fresh control; if it repeats, that is a finding about the pack |
When the small arms have settled it, bottle one pair and watch it. Two finished 100 g units at your working load — one in each base, same glass, same reeds, same room — are 160 g of base and 40 g of oil between them. Run that off a 500 ml pack: the CSI side's four small arms plus both bottled units are 245 g against the 500 g in the pack, leaving 255 g, which is 3.19 more 100 g bottles' worth at the recommended load, or 3 whole bottles. One 120 ml gold bottle is ₹106.20 and five white fibre reeds are ₹45.00, so the bottled stage is ₹781.52 with the base at ₹351.68 and the oil at ₹127.44.
The trial pack, and why it is dearer per gram
The testing size costs more per gram than the production size. That is the point of it, and it is worth saying out loud.
Pure Performance is the only base in the range with two pack sizes, which makes it the only one with a per-unit ladder: ₹325.00 for 100 g and ₹1,099.00 for 500 ml. Per 100 units that is ₹325.00 against ₹219.80, and per kilogram ₹3,250.00 against ₹2,198.00. The small pack is therefore 47.86% dearer per gram — a gap of ₹1,052.00 a kilogram, or ₹105.20 per 100 units.
That premium is the honest shape of a testing size, and it is the reason the pack exists. A hundred grams is enough to run four arms of 25 g with 15 g spare, and not enough to make a batch, so buying it commits you to nothing and tells you what you need before you commit to anything. A maker who buys the 500 ml pack to save the premium has spent ₹1,099.00 to answer a question that ₹325.00 answers, and is now holding 80 g of base per bottle's worth of material they may not use.
The reverse is also true and equally worth saying: do not produce from the trial pack. At ₹3,250.00 a kilogram against ₹2,198.00, every bottle made from a trial pack carries the testing premium into your cost of goods. One 500 ml pack fills 6.25 100 g bottles at the recommended load — 6 whole bottles — or 5.56 at the published starting load, because a lower load means more base per bottle and so fewer bottles from the same pack. Both legs of that move matter when you cost a step-down.
If the test points at one of the family-matched bases rather than the neutral one, the smallest pack available is 500 ml: Depth ₹1,099.00, Lift ₹1,099.00 and Softness ₹1,099.00 are all the same price as Pure Performance's 500 ml, and Longevity is ₹1,296.00, which is ₹39.40 more per 100 ml and ₹2,592.00 a kilogram. There is no 100 g trial size of those four, so a head-to-head against one of them starts at a 500 ml pack — which still covers the four small arms and both bottled units with 255 g left.
| Pack | Price | Per 100 units | Per kilogram | What it is for |
|---|---|---|---|---|
| Pure Performance 100 g | ₹325.00 | ₹325.00 | ₹3,250.00 | Four arms of 25 g with 15 g spare. Testing only |
| Pure Performance 500 ml | ₹1,099.00 | ₹219.80 | ₹2,198.00 | 6 whole 100 g bottles at the recommended load |
| Depth 500 ml | ₹1,099.00 | ₹219.80 | ₹2,198.00 | Published for complex, layered, gourmand, sweet and spicy |
| Lift 500 ml | ₹1,099.00 | ₹219.80 | ₹2,198.00 | Published for floral, citrus, green, fruity and aquatic |
| Softness 500 ml | ₹1,099.00 | ₹219.80 | ₹2,198.00 | Published for gentle, comforting scents |
| Longevity 500 ml | ₹1,296.00 | ₹259.20 | ₹2,592.00 | Published for oriental, amber, woody, resinous, balsamic, spicy and gourmand |
What the head-to-head costs against a production run
The case for running the test is arithmetic, not prudence.
Add the test up. The CSI side is one 100 g trial pack at ₹325.00, which covers 85 g of base with 15 g over. Your side is 85 g of base you already own. The oil is 30 g across three oils and both sides — 10 g each — and if you have all three in stock that costs you nothing new. If you have to buy them, three 50 g packs of British Rose, Roasted Coffee and Woody Oud are ₹713.80 together — and the arms draw only ₹142.76 of oil out of them, so most of that money stays on the shelf. With the packs bought, the whole comparison tops out at ₹1,038.80.
Now the thing it decides. One finished 100 g bottle at the recommended load is ₹239.56 of raw material — ₹175.84 of base and ₹63.72 of oil — plus a ₹106.20 bottle and ₹45.00 of reeds, so ₹390.76 a unit and ₹39,076.00 for a 100-bottle run. The trial pack alone is 0.83% of that run and 1.85% of the ₹17,584.00 of base in it; the base in that run is 54.1 times the trial pack, and the whole run is 120.23 times it. With the three oil packs bought the comparison is 2.66% of the run, which is 37.62 times the comparison.
Add the bottled stage and the figures barely move. Two finished units in the two bases, with bottles and reeds, are ₹781.52, so the comparison plus the bottled pair is ₹1,820.32 — 4.66% of a 100-bottle run, which is 21.47 times the whole programme. There is no version of this arithmetic in which the test is the expensive part, and that is the only argument this page needs to make about whether to run it.
One trap in the run itself, because it is the figure a maker plans against. A 100-bottle run at the recommended load needs 8,000 g of base, and sixteen 500 ml packs hold 8,000 g — exactly, with nothing to spare. A spill, a wet jug or a short fill means opening a seventeenth pack, so there is no margin at all in a sixteen-pack plan. Those sixteen packs are ₹17,584.00 and 16 kg on the courier's scale: the cheapest published route at that weight is 4 parcels of 4 kg at ₹1,440.00, against ₹2,400.00 as a single parcel — a difference of ₹960.00. Those weights are the bases only.
| Stage | What it consumes | Cost | What it settles |
|---|---|---|---|
| Your side — four arms | 85 g of base you already own | Nothing new | The reference: how your base behaves with these three oils, written down |
| The CSI side — four arms | 85 g of base from a 100 g trial pack | ₹325.00 | Whether the candidate matches, beats or loses to the reference |
| The oil, both sides | 30 g across three oils | Nothing if in stock; ₹713.80 as three 50 g packs | Family coverage — a floral, a gourmand and a resinous |
| The whole head-to-head | Both sides, with the three 50 g oil packs bought at ₹713.80 | ₹1,038.80 | 2.66% of a 100-bottle run |
| The bottled pair | 160 g of base, 40 g of oil, two bottles, ten reeds | ₹781.52 | How two finished units behave over weeks |
| Everything | The arms, the oil packs and the bottled pair | ₹1,820.32 | 4.66% of the run |
| The run it decides — 100 bottles | 8,000 g of base, 100 bottles, reeds | ₹39,076.00 | 21.47 times the whole programme |
Buying in sequence, and what not to buy yet
One small pack, a reading, then a bottled pair, then a decision. Nothing in bulk until the arms have been read.
Purchase one is a single pack and a possible oil top-up. The Pure Performance 100 g trial pack at ₹325.00 covers the whole CSI side of a three-oil test with 15 g spare, and it is the right pack even if the base you eventually want is one of the others — a neutral base is a reasonable first candidate precisely because its page positions it for testing. If you already know from the family map which base you want, buy its 500 ml pack instead and accept that it also covers the bottled stage.
On oil, buy small. If you need to top up, the 50 g packs are the right size: British Rose ₹212.40, Roasted Coffee ₹230.00, Woody Oud ₹271.40, Lavender ₹270.00, Citrus Lemon ₹170.00. A 15 g pack of British Rose at ₹94.40 is cheaper still if all you want is both arms of one oil. Read each ladder before buying anything larger, because the shapes differ: British Rose's best rate among the packs this page quotes is ₹3,068.00 a kilogram at the 1 kg, Roasted Coffee's is ₹3,738.00 at the 1 kg, Lavender's is ₹5,400.00 at the 50 gm, and Citrus Lemon's is ₹2,840.00 at the 500 gm. Woody Oud holds the same ₹4,531.20 a kilogram at its 100 g, 500 g and 1 kg packs alike, so for that oil a bigger pack buys quantity rather than a better rate.
Purchase two waits for the reading. A 500 ml pack of whichever base won, a pack of ten 120 ml gold bottles at ₹1,062.00 if you need the glass, and reeds — and read the reed ladder too, because “buy the biggest pack” is false here. A pack of 25 white fibre reeds is ₹265.00, which is ₹10.60 a reed; the best rate among the packs this page quotes is ₹9.00 a reed at the Pack of 50, and it is flat from there, so the pack of 100 at ₹900.00 and the pack of 500 buy no better rate than the pack of 50 at ₹450.00.
Three things not to buy during the comparison. Not a kilogram of base, because the whole point of the exercise is that you do not yet know which base you want. Not a kilogram of any oil, because a pair that does not survive the test leaves you holding the oil as well as the question. And not a second candidate base at the same time unless you can read both against the same reference in the same sitting — three-way comparisons sound efficient and read badly, because the reference arm gets looked at third and your eye has already made up its mind.
Shipping, for the bases only. The trial pack is 0.1 kg packed and travels in the lightest published Standard band at ₹80.00; a 500 ml pack is 1 kg at ₹110.00, two of them at ₹180.00. The sixteen packs behind a 100-bottle run are 16 kg and ship cheapest as 4 parcels at ₹1,440.00 rather than ₹2,400.00 as one, which is ₹960.00 saved by splitting — worth checking at the weight you actually order rather than assuming one parcel is cheaper. Oil packs are not quoted for freight on this page.
If your next question is quantity rather than comparison, the live CSI pages own it: 1 kg, 5 kg or 25 kg when starting a small fragrance business, how much base a hundred 100 ml bottles at a 20% load need, comparing ready-made base prices per kilogram against bottle yield and developing a 100 g trial formula and scaling it. For the load-economics question there is the most economical fragrance percentage, and for the general pre-purchase case testing fragrance oil compatibility before buying 1 kg or 5 kg. Background sits in the guide to reed diffuser bases, the Pure Performance buyer's guide and reed diffusers 101. Sibling pages in this series cover requalifying an oil whose supplier has changed its formula, and taking a settled 100 g formula up to a 10 kg batch.
Frequently asked questions
- Should I buy reed diffuser base and fragrance oil from the same supplier to simplify compatibility testing and procurement?
- How do I test a new reed diffuser base supplier before replacing the base used in my existing bestselling products?
- My reed diffuser is cloudy after mixing fragrance oil with the base — how do I determine whether the formula is physically compatible?
- How to test fragrance oil compatibility before buying 1 kg or 5 kg
- I want to launch five reed diffuser fragrances — should I buy one compatible base in bulk, or use different bases for different fragrance families?
- Should I buy 1 kg, 5 kg or 25 kg of reed diffuser base when starting a small fragrance business in India?
- How do I develop a 100 g reed diffuser trial formula, then scale it to 25 kg for wholesale production?
- How much reed diffuser base should I buy to manufacture 100 bottles of 100 ml each at a 20% fragrance load?
- How do I compare ready-made reed diffuser base prices per kg while accounting for density, fragrance load and bottle yield?
- What is the most economical fragrance percentage for a commercial reed diffuser when I compare throw, product life and raw material cost?
- A complete guide to reed diffuser bases, 2025 edition
- Best reed diffuser base oil for reed and car diffuser making in India — Pure Performance Base buyer's guide
- Reed diffusers 101 — everything a new maker needs to know

