I want to make 500 clear reed diffusers for corporate gifting — how long should I allow for compatibility and stability testing before production?
शेयर करना
- The published anchors, and the ones that do not exist
- What “clear” means as a specification
- What 500 bottles need, and who owns that calculation
- The leg made of calendar, and why it starts first
- The schedule, dated and built backwards
- Reading the schedule against today
- What is at stake, line by line
- The honest trade, arm by arm
- The first pass: two cells and two controls
- The two orders, in the right sequence
- Frequently asked questions
The published anchors, and the ones that do not exist
A schedule is only as honest as its inputs. Before any dates are written, separate the figures CSI publishes from the ones you are about to invent — because the invented ones are the ones that slip.
Published anchor one: the rest. The Longevity entry says “Rest the blend 24-48 hours before bottling for maximum stability and longevity.” and adds that “This resting period is particularly important for heavy fragrance families - it allows full molecular integration and produces more stable, consistent long-term diffusion.” That is the only duration published anywhere in the process, and it appears twice in your schedule: once inside the test, between the trial mix and the first reading, and once inside production, between the bulk mix and bottling. A gifting order of 500 bottles cannot be mixed and filled on the same day without stepping over a published instruction, so the production block has a floor of three days: mix, rest, fill.
Published anchor two: the dispatch date. Two of the five base listings carry a dispatch date in their own address. A dispatch date is not a transit time and not a rate — it is the day the pack leaves — and it is the only procurement figure on the page that is published rather than assumed. Read it on the listing for the base you are actually buying, on the day you are actually buying, and put that day on the calendar. A schedule that assumes the pack ships the moment you pay is a schedule with a hole where its longest external dependency should be.
Not published: transit. CSI publishes a rate card, not a delivery time. The October 2026 Standard rates run from ₹180.00 at two kilograms through ₹1,200.00 at the heaviest published band, and none of that is a number of days. So the transit leg in your schedule is your own observed figure from your own last order, and if you have not placed one, it is a reservation you should make generous rather than optimistic.
Not published: ageing. CSI publishes no shelf life and no stability interval for any base beyond the 24-48 hours rest. That matters enormously for a gifting order, because a gift sits in a cupboard for weeks before it is opened and then on a desk for months. Nothing on any page tells you what your blend does over that period, which is exactly why the readings at one week and four weeks exist — they are your protocol, recorded by you, and the honest way to put them in a schedule is as your own test dates rather than as a published requirement. The entries do tell you what a failure looks like: the Lift wording is “If clouding occurs, the fragrance oil may not be fully compatible at that load - reduce fragrance percentage and retest.”
Not published: a filling rate. Nothing in the catalogue tells you how long 500 bottles take to fill, and no honest page will invent one, because the figure depends on your bench, your pouring vessel and how many pairs of hands you have. What the catalogue does give you is the count of actions to be scheduled: eighty-one base packs to open and decant, 500 bottles to fill and cap, and 2,500 reeds to fit. Time the pilot — fill ten bottles from the first pass's surviving blend, note the minutes, multiply by fifty — and replace the reservation in the schedule below with your own number. Until then the production block is a block of days you have set aside, and it should be labelled as that rather than as an estimate.
| Leg | Published? | What it rests on |
|---|---|---|
| Rest between mix and bottling | Yes | the 24-48 hours rest on the Longevity entry |
| Dispatch date on the base | Yes | the date carried on the listing you are buying from |
| Freight rate | Yes | the published October 2026 bands, ₹180.00 at 2 kg to ₹1,200.00 at the heaviest |
| Transit time | No | your own observed figure from your own last order |
| Reading at one week | No | your protocol — CSI publishes no ageing interval |
| Reading at four weeks | No | your protocol, and the leg that governs the whole schedule |
| Time to fill 500 bottles | No | your measured rate; time the pilot and multiply |
| Packing and dispatch to the client | No | your reservation |
What “clear” means as a specification
A corporate gift is inspected. Five hundred of them are inspected by someone whose job is to find the one that is wrong — so clarity stops being an aesthetic and becomes the acceptance criterion.
CSI's base entries describe the finished blend as crystal clear, and the Longevity entry puts the claim with a condition attached: “No clouding, no separation when used correctly.” Read the condition. Clarity is published as an outcome of correct use, which is the same thing the clarity steps on four of the five entries say from the other direction: Depth — “If any clouding occurs, reduce fragrance percentage and retest before proceeding to batch production.” and Softness — “If clouding occurs, the fragrance oil may not be fully compatible at that load - reduce the fragrance percentage and retest.” Haze at a given load is a property of the oil and the base together under your conditions. That is why the test exists and why nobody, including this page, can promise your pair will stay clear.
So write the acceptance criterion before you write the schedule, because the schedule exists to produce evidence against it. For a gifting order the criterion has three parts: the blend is clear against a white card and against a light at bottling; it is still clear at the reading you take four weeks after mixing; and it is clear in the bottle the client will actually hold, because clarity is read through glass and the glass is part of the instrument. On Pure Performance the entry also notes what clear glass does for presentation: “Crystal clear appearance works with any label design and shows off coloured fragrance blends beautifully in glass bottles.”
Two things are not part of this criterion and should be kept out of it, or the schedule will grow arms it cannot afford. Throw is not clarity — a clear blend can under-perform in a large room and that has its own variables and its own live diagnosis page. And reed condition over thirty days is a separate test with a separate method, owned by CSI's 30-day performance test page. Your gifting gate is clarity and stability. Keep the gate narrow and the calendar survives.
One more sentence worth putting in the client's paperwork rather than only in your own notes: what you are warranting. You can warrant that every unit was filled from a blend that read clear at bottling and clear at a four-week reading of the same formula. You cannot warrant indefinite clarity, because no page publishes an ageing figure and nobody has one. That distinction is the difference between a defensible specification and a promise you will be held to in eight months.
What 500 bottles need, and who owns that calculation
The quantity question has a published answer on another CSI page, and this one is not going to re-derive it. What the calendar needs from it is three figures and a pack count.
First the convention, because every figure after it depends on it. On CSI's reed and car diffuser base entries, fragrance load is a percentage of the total finished blend — 10% as a starting point, 20% recommended, 30% maximum, with “75% base + 25% fragrance oil” given as the typical working blend. A 100 g bottle at the recommended load is therefore 20 g of oil and 80 g of base. Weigh 20 g into 80 g and divide by the base and you get 25%, which is the figure that makes a maker think they have overloaded; against the total blend, as CSI states it, the same bottle is 20%.
At that load, 500 bottles of 100 g is 50,000 g of finished blend: 40,000 g of base and 10,000 g of fragrance oil. One 500 ml base pack fills 6.25 bottles of 100 g, 6 whole, so the base order is eighty packs. Eighty packs hold 40,000 g against a requirement of 40,000 g — exactly, with nothing to spare. That is the single most important line in the procurement half of this schedule and it is a warning rather than a comfort: one spill on a 500-bottle fill day and the five-hundredth bottle does not get filled, on a date that will not move.
So order eighty-one. Eighty-one packs hold 40,500 g, leaving 500 g — 6.25 more bottles, 6 whole — and cost ₹89,019.00 against ₹87,920.00, which is 1.25% more. On a gifting order with a fixed hand-over date, 1.25% is the cheapest insurance on the whole schedule. The oil side is less tense: 10,000 g of Sandalwood at ₹5,026.80 per kilogram is ₹50,268.00, and the rate stops improving at the 100 gm among the packs this page quotes — ₹5,026.80 per kilogram, and the one larger pack above it quotes the same rate — so the pack size is a handling decision rather than a price one.
The rest of the bill of materials — bottles, reeds, caps, labels and the quantities to order of each — is owned by CSI's page on manufacturing 500 reed diffusers for Diwali corporate gifting, which works the calculation through properly. Read that page for the quantities and this one for the dates. The only hardware figures the calendar needs are the ones that bear on procurement lead time and on what a failure destroys, and those are in the risk section below.
| Line | Quantity | Packs | Held | Spare | Price |
|---|---|---|---|---|---|
| Base | 40,000 g | 80 × 500 ml | 40,000 g | none — exactly, nothing to spare | ₹87,920.00 |
| Base with one spare pack | 40,000 g | 81 × 500 ml | 40,500 g | 500 g, or 6 more whole bottles | ₹89,019.00 |
| Fragrance oil | 10,000 g | at the 100 gm rate or above | — | — | ₹50,268.00 |
| Liquid, total | 50,000 g | — | — | — | ₹1,38,188.00 |
The leg made of calendar, and why it starts first
Every other leg of this schedule can be bought: more hands, a faster courier, an extra pack. One leg cannot, and that is the one the whole plan has to be arranged around.
Sort the legs by what they are made of. Bottling 500 bottles is made of labour, so two people halve it. Packing is labour. Transit is money — a faster service costs more and arrives sooner. Base is money: eighty packs at ₹1,099.00 each, available now. The reading at four weeks is made of nothing but the passage of twenty-eight days. No amount of money or labour produces it faster, and it is 4 times the one-week reading in calendar.
That single property decides the sequence. A leg made of time has to begin before the legs made of money, because money can be committed late and time cannot be recovered. So the order of operations is: start the first pass, then do everything else while it runs. Quote the client, confirm the bottle and label artwork, read the dispatch date on the base listing, price the freight — all of that happens inside the twenty-eight days, costs you nothing in calendar, and leaves the gate as the only thing you are waiting on.
And this is the sentence worth saying outright, because it is the mistake the deadline produces. A maker who orders base and oil in the same week as they start testing has not bought a week of schedule. They have spent the option the test was for. The hand-over date will not move, so if the four-week reading goes badly the stock gets used anyway — a step-down load, a different oil, a hope — and the reading that was supposed to inform the purchase arrives after it. The ₹87,920.00 is not lost in that scenario; base is generic and oil goes into candles. What is lost is the ability to act on the result, which was the entire reason for spending twenty-eight days.
The corollary is the contingency cycle. If a reading fails, the remedy on four of the five base entries is to reduce the fragrance percentage and retest — and a retest is a new mix, a new 24-48 hours rest and a new set of readings. That is another twenty-eight days before a gate, not a quick adjustment. Which is why the honest answer to “how long should I allow” is two numbers rather than one: sixty days if the first pass clears, eighty-eight if you want to be able to survive one that does not.
There is a second thing you can do inside the twenty-eight days that is worth more than it sounds, and it costs ₹600.00 and an afternoon. Fill ten bottles from the first pass once the first reading has cleared — not 500, just ten — and treat them as the pilot. They give you the filling rate the schedule is otherwise guessing at, they tell you whether the beaker and the funnel you own can hold a 500-bottle pace, and they put ten real units in front of the client as a sample while the gate is still weeks away. The base for ten bottles is 80 g each, so it comes out of the Longevity pack you already bought for the second cell with room left. A pilot inside the waiting period converts dead calendar into three answers.
The schedule, dated and built backwards
Worked against a hand-over of Fri 18 December 2026. Shift every date by the difference between that and your own, and the shape stays the same.
Build it backwards, because the only fixed point is the end. Hand-over Fri 18 December 2026. Dispatch to the client Tue 15 December 2026, which is a reservation rather than a published transit. Packing, labelling and the final visual check complete Fri 11 December 2026. Bottling and reed-fitting on Wed 09 December 2026 and Thu 10 December 2026 — two days for 500 bottles, which is a reservation you replace with your own measured rate as soon as the pilot gives you one. The published 24-48 hours rest on Tue 08 December 2026. The bulk mix on Mon 07 December 2026.
Working further back: base and oil in hand by Fri 04 December 2026, which gives three days of float before the mix. The bulk order placed Fri 27 November 2026, with a seven-day reservation for dispatch and transit — the dispatch half of which you read off the base listing on the day. And Fri 27 November 2026 is also the gate: the four-week reading on the first pass. The two coincide deliberately. You order on the day the gate clears, not before it and not a week after.
The testing leg then runs backwards from that gate. Four weeks before Fri 27 November 2026 is Fri 30 October 2026, which is the first test mix. The reading at one week falls on Fri 06 November 2026. The first reading, after the published 24-48 hours rest, falls on Sat 31 October 2026 at the near end of the window and Sun 01 November 2026 at the far end. And in front of all of that sits the test's own procurement: materials in hand by Fri 23 October 2026, which means the test order goes in on Mon 19 October 2026.
That is the tight version — sixty days from the test order to hand-over, with no room for a failed reading. The safe version adds one contingency cycle of twenty-eight days in front, which puts the test order on Mon 21 September 2026. Both are in the table. Pick deliberately rather than by default, and tell the client which one you are on, because a quoted lead time that assumes nothing fails is a quoted lead time you will break about as often as a first pass fails.
Two structural features of that table are worth naming, because they are what makes it a schedule rather than a list. First, the gate and the bulk order share a date on purpose: there is no float between them, so if the reading slips a day the order slips a day and the whole back half moves. If you want float, buy it at the front by starting the test earlier, not at the back by compressing production. Second, the three days between materials in hand on Fri 04 December 2026 and the bulk mix on Mon 07 December 2026 are the only float in the plan, and they exist to absorb a late delivery rather than to be used for anything. Protect them. A schedule whose only float has been spent on something useful is a schedule with no float.
| Date | What happens | Anchor or reservation |
|---|---|---|
| Mon 21 September 2026 | Test order placed, safe version — one contingency cycle in hand | reservation |
| Mon 19 October 2026 | Test order placed, tight version | reservation |
| Fri 23 October 2026 | Test materials in hand | dispatch date published; transit is yours |
| Fri 30 October 2026 | First test mix — two cells and two controls | the day the long pole starts |
| Sat 31 October 2026 – Sun 01 November 2026 | First reading, after the published 24-48 hours rest | published anchor |
| Fri 06 November 2026 | Reading at one week | your protocol |
| Fri 27 November 2026 | Reading at four weeks — THE GATE — and the bulk order goes in | your protocol |
| Fri 04 December 2026 | Bulk base and oil in hand | dispatch date published; transit is yours |
| Mon 07 December 2026 | Bulk mix | reservation |
| Tue 08 December 2026 | The published 24-48 hours rest, inside production this time | published anchor |
| Wed 09 December 2026 – Thu 10 December 2026 | Bottle 500 units and fit reeds | reservation; replace with your measured rate |
| Fri 11 December 2026 | Packing, labelling and final visual check complete | reservation |
| Tue 15 December 2026 | Dispatch to the client | reservation |
| Fri 18 December 2026 | Hand-over | the client's fixed date |
Reading the schedule against today
A schedule is a diagnostic as well as a plan. Put today's date against it and it tells you what you have already lost.
Today is Sun 18 October 2026. The worked hand-over is Fri 18 December 2026, which is 61 days away. The tight schedule needs the test order placed on Mon 19 October 2026 — 1 day from now. The safe schedule, with one contingency cycle, needed it on Mon 21 September 2026, which was 27 days ago. So a maker reading this page today, with a hand-over on Fri 18 December 2026, can still run the full test once. They cannot run it twice.
That is a specific and actionable position rather than a gloomy one, and it changes what you do in three ways. First, the first pass has to go in tomorrow, not next week — and because the test order is small, there is no reason it cannot. Second, the first pass should carry a second cell rather than one, because a second cell is the only thing that can save you twenty-eight days if the first one fails: you do not retest, you switch to the cell that held. Third, the client conversation about the hand-over date happens now, while there is still something to negotiate, rather than in four weeks when the only remaining option is to ship a formula you have one reading on.
The second of those is the single highest-value decision on this page, so price it. A second cell is one more base pack. Longevity at ₹1,296.00 is 0.94% of the ₹1,38,188.00 liquid bill and 0.81% of the ₹1,60,688.00 a failure after filling would destroy. For that, you buy the ability to proceed on the day the gate clears even if one cell has clouded — because you have two readings on two bases and not one reading on one. Twenty-eight days of schedule for ₹1,296.00 is the best trade in this whole exercise.
If your own hand-over date is closer than 61 days, the honest arithmetic is less comfortable and worth doing anyway. Count backwards: production and packing need about a fortnight, procurement a week, and the gate four weeks, so under about fifty days there is no version of the schedule that includes a four-week reading. At that point the choice is explicit — ship on a one-week reading and say so in your own records, or move the date — and this page's only contribution is to make sure you are choosing rather than discovering.
| Version | Test order due | Status today | What it buys |
|---|---|---|---|
| Safe — one contingency cycle | Mon 21 September 2026 | 27 days gone | survives one failed reading without moving the date |
| Tight — no contingency | Mon 19 October 2026 | 1 day left | one full four-week reading, and no second chance |
| Tight plus a second cell | Mon 19 October 2026 | 1 day left | ₹1,296.00 buys a switch instead of a retest — 0.94% of the liquid bill |
| Compressed — one-week gate only | later | available | recovers 21 days and exposes ₹1,60,688.00 |
What is at stake, line by line
The schedule is an argument about risk, so the risk has to have a number on it. Five hundred bottles is a larger number than most makers have in front of them at once.
The liquid first. 40,000 g of base as eighty packs is ₹87,920.00; 10,000 g of Sandalwood is ₹50,268.00; together ₹1,38,188.00. Per bottle that is ₹276.38 of blend — ₹175.84 of base content and ₹100.54 of oil. Add a 120 ml gold bottle at ₹106.20 and five white fibre reeds at ₹45.00 and one finished unit is ₹427.58, so 500 of them are ₹2,13,788.00.
But a clarity failure after filling does not destroy all of that, and saying so precisely is more useful than rounding up. The glass can be emptied and washed. The reeds cannot: a fibre reed that has stood in a hazy blend has drawn it up its length, and it is not a component you refit into a gift. So the destroyed figure is the liquid plus the reeds: ₹1,38,188.00 plus 2,500 reeds at ₹22,500.00 — ₹1,60,688.00 in all. Those 2,500 reeds are five packs of five hundred, which hold 2,500 — exactly, with nothing to spare, so one reed dropped on the fill line means opening a sixth pack. Within that, the base is 54.71%, the oil 31.28% and the reeds 14%.
Set the first pass against it. The whole first pass — the ₹325.00 trial pack, one ₹1,296.00 Longevity pack, a ₹502.68 100 g pack of oil, a ₹826.00 pack of ten 50 ml vessels and a ₹450.00 pack of fifty reeds — is ₹3,399.68. That is 2.46% of the liquid bill, 1.59% of the 500 finished units, and the destroyed figure is 47.27 times it. In liquid alone the first pass is ₹2,123.68, or 1.54%.
One figure that is deliberately absent, because no page supports it: the cost of a failure the client finds. A hazy unit discovered on your bench is the ₹1,60,688.00 above. A hazy unit discovered on a hundred desks is that plus a relationship, and nothing in a catalogue prices a relationship. Which is the real reason the four-week reading sits where it does: not because ₹1,60,688.00 is a large number, but because the number that follows it cannot be computed at all.
Split the destroyed figure by when it is discovered, because the schedule is really a bet on that timing. A failure found in the first pass costs the arms: 32 g of base and 8 g of oil per arm, a few rupees, and nothing else. A failure found at bottling costs the liquid already mixed but not the reeds, because the reeds have not gone in yet. A failure found after the reeds are fitted costs the full ₹1,60,688.00. And a failure found by the client costs that plus everything that is not on an invoice. The four readings in the first pass exist to move the discovery as far to the left of that list as possible, and every day of calendar you cut moves it to the right.
| Line | Figure | Share of what a failure destroys |
|---|---|---|
| Base — 40,000 g as eighty packs | ₹87,920.00 | 54.71% |
| Oil — 10,000 g of Sandalwood | ₹50,268.00 | 31.28% |
| Reeds — 2,500 at ₹9.00 each | ₹22,500.00 | 14% |
| Destroyed by a clarity failure after filling | ₹1,60,688.00 | 100% |
| Glass | washable | nil — it is emptied and cleaned, not written off |
| 500 finished units at this build | ₹2,13,788.00 | — |
| The whole first pass | ₹3,399.68 | 2.46% of the liquid bill |
The honest trade, arm by arm
Deadlines get compressed. The useful thing a schedule can do is say exactly what each compression recovers and exactly what it exposes, so the choice is made in daylight.
Shorten the rest from 48 hours to 24. Recovers one day, twice — once in the test and once in production. It is inside the published window, so it costs no evidence at all. This is the only free compression on the list and it is worth two days. Take it before anything else.
Compress the bottling block from two days to one. Recovers one day and costs labour. The risk is not clarity, it is handling: 500 bottles filled in one shift by tired hands produces more spills and more short fills, and the base order at eighty packs holds 40,000 g against 40,000 g with nothing to spare. So if you compress the fill, order the eighty-first pack: ₹1,099.00 for 500 g of cover is the cheapest line in the plan.
Drop the second cell from the first pass. Recovers no days and saves ₹1,296.00. It exposes you to a full twenty-eight-day contingency cycle if the one cell you kept fails, because you have nothing to switch to. ₹1,296.00 is 0.94% of the liquid bill and 0.81% of what a failure destroys. This is the worst trade on the list and the one most often taken, because it is the only one that shows up as a line on an order rather than as a day on a calendar.
Drop the reading at one week. Recovers no days at all, provided you are keeping the four-week reading, because the one-week reading happens inside that window. It is free, so there is no reason to drop it — and it is the reading that gives you an early warning while there is still time to act on it. Drop the reading at four weeks and you recover twenty-one days, making the one-week reading the gate. That is the big one, and what it exposes is the whole ₹1,60,688.00, because a change that takes three weeks to appear is exactly the change a gift sitting in a cupboard will find for you.
| Compression | Days recovered | Rupees saved | What it exposes |
|---|---|---|---|
| Rest at 24 hours rather than 48 | 2 — one in the test, one in production | none | nothing; it is inside the published window |
| Bottle 500 units in one day rather than two | 1 | none | handling error against a base order with nothing to spare — order pack eighty-one at ₹1,099.00 |
| Shorten the packing reservation | up to 3 | none | a final visual check done in a hurry on 500 units |
| Drop the reading at one week | 0 | none | your early warning, for nothing in return — do not take this one |
| Drop the second cell | 0 | ₹1,296.00 | a full 28-day cycle if the remaining cell fails; the pack is 0.94% of the liquid bill |
| Drop the reading at four weeks | 21 | none | the whole ₹1,60,688.00 |
| Order bulk in the same week as the first mix | 7 | none | the option itself — the stock gets used whatever the reading says |
The first pass: two cells and two controls
Four arms, one day, two bases. Small enough to start tomorrow and structured enough that a failure in one cell does not cost you the schedule.
Check the family map before you pick the cells, because it may already have an opinion. Sandalwood is a woody oil on CSI's editorial reading, and woody is one of the families the Longevity entry is published for. Pure Performance is published as the neutral base and as the one to test in. So the two cells are not arbitrary: one is the base you intended to use and the other is the base the map points a woody oil at. Keep the two-step visible in your notes — the entries name families, and classifying your bottle as woody is CSI's editorial judgement, not a published fact about that bottle.
If your gifting fragrance is not a woody, read your own row off the map below and substitute. A floral or a fresh citrus points at Lift — and on fresh citrus the Longevity entry is explicit: “Light Florals, Fresh Citrus, Aquatics - use Lift Base instead for brightness and airiness.” A sweet, spicy or gourmand oil points at Depth, whose entry carries the one stability claim in the range: “Sweet, spicy, and gourmand fragrance oils that separate or behave inconsistently in a neutral base perform stably and predictably in the Depth Base.” Scope that to the families it names and confirm it with your own arm. A heavy family also has a published starting point: “When testing a new oriental, woody, or resinous oil in the Longevity Base, begin at 10%. Heavy fragrance families can behave differently at different loads - build up gradually.”
Then the arms. Four of them at 40 g: Sandalwood in Pure Performance, Sandalwood in Longevity, and a base-only control beside each. Every fragrance arm is 8 g of oil and 32 g of base, which is 20% of the total finished blend; the controls are 32 g of base and no oil at all. The Pure Performance cell and its control take 64 g out of the 100 g trial pack, leaving 36 g. The Longevity cell and its control take 64 g out of 500 g, leaving 436 g. The two fragrance arms need 16 g of oil against a 100 g pack, leaving 84 g — which is 4.2 times the 20 g a two-base step-down ladder in both bases would consume.
Four matched 50 ml vessels out of a ₹826.00 pack of ten, a 250 ml silicon beaker at ₹600.00 to pour the arms without losses, and a ₹450.00 pack of fifty white fibre reeds if you want a throw observation alongside the clarity series — noting that fitting reeds changes the evaporation rate, so the clarity series and the throw series are two different experiments and should not share a vessel. Total ₹3,399.68, of which ₹2,123.68 is liquid.
| If your gifting fragrance is | Example | Base its family is published for | The entry's own note |
|---|---|---|---|
| woody, resinous, oriental, amber, balsamic | Sandalwood, Woody Oud, Dark Vanilla | Longevity | begin at 10% for a heavy family |
| floral, citrus, green, fruity, aquatic | British Rose, Citrus Lemon | Lift | named on the Longevity entry as the base to use instead |
| complex, layered, gourmand, sweet, spicy, chypre | Roasted Coffee | Depth | the one entry claiming a stability advantage, scoped to those families |
| gentle, comforting | a soft positioning rather than a family | Softness | — |
| under test, any family | the control arm | Pure Performance | the neutral base; the only 100 g pack in the range, at ₹325.00 |
The two orders, in the right sequence
Two orders, not one. The sequence between them is the whole point of the schedule, and the freight arithmetic on the second one is not what most makers assume.
Order one, now. The ₹325.00 Pure Performance trial pack, one ₹1,296.00 Longevity pack, a ₹502.68 100 g pack of Sandalwood, a ₹826.00 pack of ten 50 ml bottles and a ₹450.00 pack of fifty white fibre reeds — ₹3,399.68. Two base packs weigh 1.1 kg together and ship at ₹180.00 on the published rates. Small, fast, and the only order that has to go in before anything else is known.
Order two, on the day the gate clears. Eighty-one 500 ml packs at ₹89,019.00 and 10,000 g of oil at ₹50,268.00. That is a different kind of order and it needs a conversation rather than a checkout, for two reasons that both bear on the calendar. First, a pack size being listed is not the same as eighty-one of it being on the shelf on the day you click, so confirm the quantity and the dispatch date before the schedule depends on them. Second, the freight: eighty-one base packs is eighty-one kilograms at 1 kg a pack, which is far above the heaviest published Standard band, so the published table does not quote a single parcel for it at all.
Where the published table does reach, it is worth knowing that splitting often beats consolidating. Six base packs in one parcel is ₹630.00; as 2 parcels of 3 kg it is ₹540.00, ₹90.00 cheaper. The bands are not linear, so at several weights two smaller parcels sit below one larger one. For the eighty-one-pack order the cheapest published arrangement inside the table is 6 parcels of 13.5 kg at ₹1,200.00 each — ₹7,200.00 in all, which is 8.09% of the base order itself. Nothing above the heaviest published band is extrapolated on this page, and a base order of this size is a quotation rather than an assumption.
Fragrance oil is left out of every freight figure here on purpose: the packed weights stored against the oil variants are not a basis a shipping number should be published on, so no oil appears in any of them. And on quantity, the deeper question of 1 kg against 5 kg against 25 kg of base is owned by CSI's bulk-quantity page, with the hundred-bottle version at how much base for a hundred bottles. This page's contribution is the sequence: small order now, large order after the gate, and not both in the same week.
One more sequencing point that catches makers on a first large order. The two orders are not the only two dependencies in the schedule: bottles, caps and printed labels have their own lead times, and none of them depends on the gate at all, because the gate is about the liquid. So put the hardware on its own line and order it early, during the twenty-eight days, while the base and oil wait behind the reading. The 120 ml gold bottle is ₹1,062.00 a pack of ten, ₹106.20 a bottle, and white fibre reeds are ₹9.00 each from the Pack of 50 upward — both quantities the 500-unit calculation page works out properly. Ordering hardware early costs you nothing and takes two dependencies off the critical path; ordering liquid early costs you the option. The distinction is the whole discipline of this schedule.
| Order one — now | Order two — on the day the gate clears | |
|---|---|---|
| Base | Pure Performance 100 g ₹325.00 + Longevity 500 ml ₹1,296.00 | 81 × 500 ml — ₹89,019.00 |
| Oil | Sandalwood 100 g — ₹502.68 | 10,000 g — ₹50,268.00 |
| Vessels and reeds | ₹826.00 + ₹450.00 | owned by the 500-unit calculation page |
| Total | ₹3,399.68 | ₹89,019.00 of base plus ₹50,268.00 of oil |
| Freight, base packs only | ₹180.00 | ₹7,200.00 as 6 × 13.5 kg parcels |
| Placed | Mon 19 October 2026 | Fri 27 November 2026 |
Frequently asked questions
- I want to manufacture 500 reed diffusers for Diwali corporate gifting — how do I calculate the base, fragrance, reeds and bottle quantities required?
- How do I develop a 100 g reed diffuser trial formula, test several fragrance loads, confirm safety and compatibility, then scale it to 25 kg for wholesale production?
- My reed diffuser is cloudy after mixing fragrance oil with the base — how do I determine whether the formula is physically compatible?
- How do I test reed diffuser performance over 30 days using liquid weight loss, fragrance intensity, reed condition and room temperature?
- Should I buy 1 kg, 5 kg or 25 kg of reed diffuser base when starting a small fragrance business in India?
- How much reed diffuser base should I buy to manufacture 100 bottles of 100 ml each at 20% fragrance load?
- How to test fragrance oil compatibility before buying 1 kg or 5 kg
- How do I test a new reed diffuser base supplier before replacing the base used in my existing bestselling products?
- I want to launch five reed diffuser fragrances — one compatible base in bulk, or different bases for different fragrance families?
- How do I make a luxury hotel-style reed diffuser for commercial sale using a ready-made base, premium fragrance oil and fibre reeds?
- How do I compare ready-made reed diffuser base prices per kg while accounting for density, fragrance load and finished bottle yield?
- What is the most economical fragrance percentage for a commercial reed diffuser?
- A complete guide to reed diffuser bases, 2025 edition
- Reed diffusers 101 — everything a new maker needs to know

